ACO Technologies - Channel Footpath

Page 1

Channel Footpath Drainage

The ideal solution for draining pedestrian areas Channel Footpath Drainage


ACO N100K Channel Footpath Drainage - Inlay Gratings FOR USE WITH ASPHALT, CONCRETE AND PAVIOUR APPLICATIONS Load Class (EN 1433:2002/DIN 19580)

Optimum solution

Benefits for specifiers

ACO Channel Footpath Drainage systems N100K 080 (80mm total depth) and N100K 0100 (100mm total depth) are general purpose channel drainage systems with protective cast-in galvanised steel edge rails for use where installation depth is restricted, whilst providing excellent drainage performance.

Profiled kerb outlet buff or grey coloured and rainwater downpipe adaptor

3-way channel connector to build drainage systems

Resin concrete construction offers excellent chemical resistance

Quicklock速 fastenings for all gratings

Based on ACO N100K range of channels with a wide range of inlay gratings

Constant depth channels with an internal width of 100mm and invert depths of 65mm and 85mm

Channel sealant groove for suspended slab applications ie. car park decks

Downpipe connector for use with external diameter 85mm plastic pipe (see page 5)

Free technical support To support the specifier and contractor in designing and installing ACO N100K Channel Footpath Drainage schemes, ACO Drain Design Services Department offers computer-aided scheme design, hydraulic performance calculations and installation advice services. Telephone Hotline:

01462 816666

Benefits for contractors

Fax Hotline:

Resin concrete channel construction is strong and rigid for lifetime integrity

Quick to install, minimal excavation

Lightweight channel units - maximum weight less than 12kg

Channel provided with galvanised steel rail as standard - stainless steel rails available to special order

A wide range of Quicklock速 gratings available

01462 851081 e-mail:

draintechnical@aco.co.uk website:

www.aco.co.uk

80 and 100mm channel unit complete with Quicklock速 inlay grating

2


ACO N100K Channel Footpath Drainage FOR USE WITH ASPHALT, CONCRETE AND PAVIOUR APPLICATIONS

Kerb Outlets

Bullnose/Textured†bullnose kerb outlet

Half batter kerb outlet

Full batter kerb outlet

Channel Accessories

Rainwater downpipe adaptor

Resin concrete

Re *

te

e

t re

nc

co

e et

r nc

co

ed rc

re nc

co

ry

fo in

re

na

sin

Water absorption <0.01% by weight*

i rd

O

3-4 times compressive strength of OPC (Ordinary Portland Cement), so products can be made lighter

ss

10 20 30 40 50 60 70 80 90 100

la

Minimal lifetime maintenance

G

Compressive strength strength (N/mm2)

Corner unit 3-way connector (N100K 0100 only)

Water absorption

†N100K 080 and 080V only

1.5 2.0

BBA report No. 1580

3

sin nc e*

te

re nc

co

e

t re

nc

t re

co

ed rc fo

in

y

co

ar

in

re ss

rd

Re

O

la

G

*

depth (mm)

0.5 1.0


ACO N100K Channel Footpath Drainage PARTS TABLE Channel units with sealant grooves for use with inlay gratings only

Description

Order no.

Invert Constant Depth

Dimensions (mm) Depth Overall Invert

Width Bore

Overall

Length

Weight (kg)

Closing Endcap

N100K 080

06395

L

80

65

100

130

1000

9.0

N100K 080V

06071

L

80

65

100

130

1000

9.4

N100K006 N100K006

N100K 0100

06086

L

100

85

100

130

1000

10.4

N100K006

N100K 1000V

06088

L

100

85

100

130

1000

10.5

N100K006

1000mm 80/100mm

100mm

130mm

100mm

80/100mm

N100K 080/N100K 0100

90mm

N100K 080V/N100K 0100V

Kerb outlets

Description

Colour

Order no.

Dimensions (mm) Depth Overall Invert

HBKOB Half batter

buff

4608

200

-

100

155

130

HBKOG Half batter

grey

4682

200

-

100

155

130

6.5

FBKOB Full batter

buff

4609

200

-

100

155

130

6.5

FBKOG Full batter

grey

4683

200

-

100

155

130

6.5

BNKOB Bullnose

buff

4610

200

-

100

155

130

7.5

BNKOG Bullnose

grey

4684

200

-

100

155

130

7.5

CKOG Textured bullnose†

grey

7173

200

-

100

155

130

7.5

130mm

155mm

FBKOB/FBKOG Full batter kerb outlets

Weight (kg) 6.5

155mm 44mm

200mm

200mm

HBKOB/HBKOG Half batter kerb outlets

Length

130mm

155mm 44mm

44mm

Overall

200mm

130mm

Width Bore

BNKOB/HBNKOG/CKOG Bullnose kerb outlets

V Indicates a PVC-U Ø110mm pipe cast into channel base for vertical outlet.

4

† For N100K 080 and 080V only. Note: As with all pre-cast products, polymer concrete units are subject to dimensional and weight tolerances.


ACO N100K Channel Footpath Drainage PARTS TABLE Corner unit 3-way connector (N100K 0100 only)

Description

Colour

Order no.

Dimensions (mm) Depth Overall Invert

TO2B Corner unit

buff

4692

100

85

100

150

155

3.0

TO2G Corner unit

grey

4694

100

85

100

150

155

3.0

Width Bore

Overall

Length

Weight (kg)

155mm

150mm

100mm

100mm

155mm

TO2B/TO2G Corner unit 3-way connector Endcaps for corner unit

Description

Colour

Order no.

Dimensions (mm) Depth Overall Invert

4844 Closing

buff

4844

100

-

-

130

20

0.5

4848 Closing

grey

4848

100

-

-

130

20

0.5

Order no.

Dimensions (mm) Depth Overall Invert

Width Bore

Overall

Length

Weight (kg)

DCO1B Downpipe connector buff

4607

80

65

100

150

155

2.6

DCO1G Downpipe connector grey

4681

80

65

100

150

155

2.6

DCO2B Downpipe connector buff

1466

100

85

100

150

155

3.2

DCO2G Downpipe connector grey

1467

100

85

100

150

155

3.2

Width Bore

Overall

Length

Weight (kg)

100mm

20mm

20mm 130mm

4844/4848 Closing endcap Inlet/downpipe connector

155mm

150mm

80mm

155mm

155mm

155mm

150mm

Colour

100mm

Description

Ø75mm

Ø75mm

Ø85mm

Ø85mm

DCO1B/DCO1G Downpipe connector

DCO2B/DCO2G Downpipe connector

Note: As with all pre-cast products, polymer concrete units are subject to dimensional and weight tolerances.

5


ACO N100K Channel Footpath Drainage PARTS TABLE FOR N100K 080 AND N100K 0100 ONLY Inlay gratings - Load Class A15

Description

Order no.

Dimensions (mm) Width Overall Length

Slotted galvanised steel 400QL

31530

123

1000

-

2.0

Slotted galvanised steel 402QL

31531

123

500

-

1.0

Stainless steel slotted 460QL

31630

123

1000

-

2.0

Stainless steel slotted 461QL

31631

123

500

-

1.0

Description

Order no.

Dimensions (mm) Width Overall Length

Flange Thickness

Weight (kg)

Slotted galvanised steel 423QL

31540

123

1000

-

4.6

Slotted galvanised steel 424QL

31541

123

500

-

2.3

Stainless steel slotted 470QL

31640

123

1000

-

4.6

Stainless steel slotted 471QL

31641

123

500

-

2.3

Galvanised steel mesh 410QL*

2815

123

1000

-

3.7

Galvanised steel mesh 412QL*

2816

123

500

-

2.0

‘Heelguard’ resin composite 522QL - Black

4780

123

500

-

1.6

‘Heelguard’ resin composite 523QL - White

4781

123

500

-

1.6

‘Heelguard’ cast iron 508QL

2810

123

500

-

3.6

Slotted cast iron 502QL

2809

123

500

-

4.1

Perforated galvanised steel 483QL*

31520

123

1000

-

4.5

Perforated galvanised steel 2460QL*

31521

123

500

-

2.4

Mosaic ductile iron 519QL*

7593

123

500

-

4.1

Slotted galvanised steel

Flange Thickness

Weight (kg)

Stainless steel slotted

Inlay gratings - Load Class C250

Slotted galvanised steel

Stainless steel slotted

Galvanised steel mesh

‘Heelguard’ resin composite

‘Heelguard’ cast iron

Slotted cast iron

Perforated galvanised steel

Mosaic ductile iron

6 *

These gratings are available to special order. Please contact ACO Customer Support Team for availability.


ACO N100K Channel Footpath Drainage INSTALLATION DETAILS A AND C 1.0 Ground Conditions

Asphalt Pavement

The customer should ensure that the minimum dimensions shown are suitable for the existing ground conditions. Engineering advice may be necessary.

Note: Top of haunch 25mm maximum below wearing course

Detail A

See Note 5

2.0 Block and Paving Slab Pavements The channel must be supported laterally and therefore blocks and pavement slabs must be restrained from movement by bedding securely e.g. by using a Polymer Modified Mortar for bed and perpendicular joints (for example RONAFIX Mortar Mix C from Ronacrete: Tel 01279 638 700). Engineering advice may be required.

Concrete bed and haunch Minimum C25 100mm minimum Class A 150mm minimum Class C

See Note 1 100mm minimum Class A 150mm minimum Class C

Concrete Pavement

Note: Expansion joint to engineers detail

See Note 3

Detail A

3.0 Surface Cracks Alternate crack control and movement joints transversely within bed and haunch may reduce unsightly surface cracking.

Concrete Slab

Concrete Slab Concrete bed and haunch Minimum C25 100mm minimum Class A 150mm minimum Class C

4.0 Joint Sealant Where ACO Drain channel joints and fittings are to be sealed (where used in foul water applications or where impermeability is required) contact a sealant specialist for guidance on the most appropriate sealing compound to use. 5.0 Surface Protection In asphalt pavements avoid contact between compaction equipment and channel/grating. This may be achieved by ensuring that the finished surface level lies above the grating level (by at least 3mm). Stones should be removed from grating prior to laying/rolling wearing course.

See Note 1 100mm minimum Class A 150mm minimum Class C

Block and Paving Slab Pavement (Options 1 and 2) Note: Block bedded securely (See Note 2)

Detail A Option 1 See Note 3

Option 2

Block

Block

Concrete bed and haunch Minimum C25 100mm minimum Class A 150mm minimum Class C

See Note 1 Approx 225mm

100mm minimum Class A 150mm minimum Class C

Detail A

3mm Generally

Grating

7 Pavement or haunch (construction varies)

Channel Wall


ACO N100K Channel Footpath Drainage SPECIFICATION CLAUSE

Model specification clause The surface drainage system shall be ACO drain N100K channel system as supplied by ACO Technologies plc; all materials and components within the scope of this channel system shall be obtained from this manufacturer. The system shall be certificated to Load Class A/C as defined in EN 1433:2002, load test certificates shall be supplied to the Supervising Officer. The system shall be of 100mm nominal internal width, manufactured in polyester resin concrete with cast-in galvanised/stainless steel edge rails. The channels shall be installed with manufacturer’s grating appropriate to the Load Class of the place of installation and locked securely in place using the manufacturer’s Quicklock® boltless locking system.

The system shall be installed in accordance with the manufacturer’s printed instructions, and the work carried out as specified in drawing no. ( * ) and in accordance with recognised good practice. Standards of workmanship shall generally be as specified in BS EN 752:Parts 1-4 and BS 8000:Part 14:1989.

*

insert appropriate information

Note: Also available on our website for downloading

Technical Support Services To support architects, engineers and contractors in designing and installing ACO N100K Channel Footpath Drainage schemes, ACO Drain Design Services Department offers computer-aided scheme design, hydraulic performance calculations and installation advice services. Our Telephone Hotline 01462 816666, Fax Hotline 01462 851081, e-mail draintechnical@aco.co.uk and website www.aco.co.uk enable us to give you the response you need.

8


ACO CivicDrain速 Channel Footpath Drainage - Overlay Gratings FOR USE WITH BLOCK PAVIOUR AND PAVING SLAB APPLICATIONS Load Class (EN 1433:2002)

Optimum solution

Benefits for specifiers

ACO Channel Footpath Drainage systems - G080 (80mm total depth) and G0100 (100mm total depth) - for use where installation depth is restricted, whilst providing excellent drainage performance.

Profiled kerb outlet buff or grey coloured and rainwater downpipe adaptor

3-way channel connector to build drainage systems

Resin concrete construction offers excellent chemical resistance

Free technical support

Based on the ACO CivicDrain速 range of channels with a wide range of lockable overlay gratings

Constant depth channels with an internal width of 100mm and invert depths of 60mm and 80mm

Channel sealant groove for suspended slab applications ie. car park decks

Downpipe connector for use with external diameter 85mm plastic pipe (see page 12)

Fax Hotline:

Neat appearance from overlay grating

01462 851081

Benefits for Contractors

e-mail:

To support the specifier and contractor in designing and installing ACO CivicDrain速 Channel Footpath Drainage schemes, ACO Drain Design Services Department offers computer-aided scheme design, hydraulic performance calculations and installation advice services. Telephone Hotline:

01462 816666

draintechnical@aco.co.uk website:

www.aco.co.uk

Resin concrete channel construction is strong and rigid for lifetime integrity

Quick to install, minimal excavation

Lightweight channel units - maximum weight less than 13kg

A wide range of lockable gratings available for different load classes.

80 and 100mm channel unit complete with bolted overlay grating

9


ACO CivicDrain® Channel Footpath Drainage FOR USE WITH BLOCK PAVIOUR AND PAVING SLAB APPLICATIONS Kerb Outlets

Bullnose/Textured† bullnose kerb outlet

Half batter kerb outlet

Full batter kerb outlet

Channel Accessories

Rainwater downpipe adaptor

Resin concrete

co t re e*

e

t re

nc

co

te

ed rc

re nc

co

nc

y

fo in

re

r na

in

s Re

Water absorption <0.01% by weight*

i rd

O

3-4 times compressive strength of OPC (Ordinary Portland Cement), so products can be made lighter

ss

10 20 30 40 50 60 70 80 90 100

la

Minimal lifetime maintenance

G

Compressive strength strength (N/mm2)

Corner unit 3-way connector (G0100 only)

Water absorption

depth (mm)

0.5 1.0 1.5 2.0

sin Re *

te

d

e

et

r nc

co

BBA report No. 1580

te

re nc

co

e rc

*

re nc

y

fo in

10

co

ar

re

in

rd

ss

la

O

G

† G080 only


ACO CivicDrain® Channel Footpath Drainage PARTS TABLE Channel units with sealant groove for use with overlay gratings only

Description

Order no.

Invert Constant Depth

Dimensions (mm) Depth Overall Invert

Width Bore

Overall

Length

Weight (kg)

Closing Endcap

G080*

6030

L

80

65

100

130

1000

7.6

G006

G0100*

6031

L

100

85

100

130

1000

12.0

G006

100mm

1000mm

80-100mm

60-80mm

130mm

Ø110mm

90mm

Kerb outlets

Description

Colour

Order no.

Dimensions (mm) Depth Overall Invert

HBKOB Half batter

buff

4608

200

-

100

155

130

HBKOG Half batter

grey

4682

200

-

100

155

130

6.5

FBKOB Full batter

buff

4609

200

-

100

155

130

6.5

FBKOG Full batter

grey

4683

200

-

100

155

130

6.5

BNKOB Bullnose

buff

4610

200

-

100

155

130

7.5

Width Bore

Overall

Length

Weight (kg) 6.5

BNKOG Bullnose

grey

4684

200

-

100

155

130

7.5

CKOG Textured bullnose†

grey

7173

200

-

100

155

130

7.5

130mm

155mm

44mm

HBKOB/HBKOG Half batter kerb outlets

155mm 44mm

200mm

200mm

44mm

*

130mm

155mm

FBKOB/FBKOG Full batter kerb outlets

200mm

130mm

BNKOB/HBNKOG/CKOG Bullnose kerb outlets

Pre-formed Ø110mm round knockout for vertical outlet.

† For G080 only. Note: As with all pre-cast products, polymer concrete units are subject to dimensional and weight tolerances.

11


ACO CivicDrain® Channel Footpath Drainage PARTS TABLE Corner unit 3-way connector (G0100 only)

Description

Colour

Order no.

Dimensions (mm) Depth Overall Invert

TO2B Corner unit

buff

4692

100

85

100

150

155

3.0

TO2G Corner unit

grey

4694

100

85

100

150

155

3.0

Width Bore

Overall

Length

Weight (kg)

150mm

100mm

100mm

155mm

155mm

TO2B/TO2G Corner unit 3-way connector Endcaps for corner unit

Description

Colour

Order no.

Dimensions (mm) Depth Overall Invert

4844 Closing

buff

4844

100

-

-

130

20

0.5

4848 Closing

grey

4848

100

-

-

130

20

0.5

Width Bore

Overall

Length

Weight (kg)

100mm

20mm

20mm 130mm

4844/4848 Closing endcap

Inlet/downpipe connector

Order no.

Dimensions (mm) Depth Overall Invert

Width Bore

Overall

Length

Weight (kg)

DCO1B Downpipe connector buff

4607

80

65

100

150

155

2.6

DCO1G Downpipe connector grey

4681

80

65

100

150

155

2.6

DCO2B Downpipe connector buff

1466

100

85

100

150

155

3.2

DCO2G Downpipe connector grey

1467

100

85

100

150

155

3.2

12

155mm

150mm

80mm

155mm

155mm

155mm

150mm

Colour

100mm

Description

Ø75mm

Ø75mm

Ø85mm

Ø85mm

DCO1B/DCO1G Downpipe connector

DCO2B/DCO2G Downpipe connector

Note: As with all pre-cast products, polymer concrete units are subject to dimensional and weight tolerances.


ACO CivicDrain® Channel Footpath Drainage PARTS TABLE FOR G080/G0100 ONLY Overlay Gratings - Load Class A15

Description

Order no.

Dimensions (mm) Width Overall Length

Slotted galvanised steel 403

6303

127

1000

3

1.6

Slotted galvanised steel 404

6304

127

500

3

0.8

Slotted stainless steel 407*

6318

127

1000

3

1.6

Slotted stainless steel 408*

6319

127

500

3

0.8

Description

Order no.

Dimensions (mm) Width Overall Length

Flange Thickness

Weight (kg)

Slotted galvanised steel 405

6300

127

1000

4

2.9

Slotted galvanised steel 406

6301

127

500

4

1.5

Galvanised steel mesh 413*

6305

127

1000

3

3.3

Galvanised steel mesh 414*

6306

127

500

3

1.7

Description

Order no.

Dimensions (mm) Width Overall Length

Flange Thickness

Weight (kg)

Cast iron slotted 500

6314

127

500

5

2.9

‘Heelguard’ ductile iron 501

6350

127

500

5

3.2

Cast iron solid cover 511

6320

127

500

5

3.8

Flange Thickness

Weight (kg)

Slotted galvanised steel

Flange Thickness

Weight (kg)

Slotted stainless steel

Overlay Gratings - Load Class B125

Slotted galvanised steel

Galvanised steel mesh

Overlay Gratings - Load Class C250

Cast iron slotted

‘Heelguard’ ductile iron

Cast iron solid cover

Locking

Description

Order no.

Dimensions (mm) Width Overall Length

Locking assembly for slotted galvanised steel 808

6309

-

-

-

0.1

Locking assembly for slotted stainless steel * 806

6316

-

-

-

0.1

Locking assembly for galvanised steel mesh* 809

6308

-

-

-

0.1

Locking assembly for all cast iron gratings and cover 812

6317

-

-

-

0.1

13 *

These gratings and locking assemblies are available to special order. Please contact ACO Customer Support Team for availability.

Note: The channel Standard EN 1433:2002 recommend locking at Load Class C.


ACO CivicDrain速 Channel Footpath Drainage INSTALLATION DETAILS (LOAD CLASS A TO C) 1.0 Ground Conditions The customer should ensure that the minimum dimensions shown are suitable for the existing ground conditions. Engineering advice may be necessary.

Block and Paving Slab Pavements Block Bedded securely (See Note 3)

Detail A

2 Load Class B and C

1 Load Class A Block or paving

Block or paving

2.0 Overlay Gratings (Detail A) The relationship between finished pavement level and the channel will depend upon the overlay grating type chosen. Refer to Detail A below and Page 13 for flange thickness. It is important to ensure that the edges of the grating are isolated from any floor/pavement finishes.

Concrete bed and Haunch Minimum C25

150mm min

Approx 225mm

Approx 225mm

3.0 Block and Paving Slab Pavements The channel must be supported laterally and therefore blocks and paving slabs must be restrained from movement by bedding securely e.g. by using a Polymer Modified Mortar for bed and perpendicular joints (for example RONAFIX Mortar Mix C from Ronacrete: Tel 01279 638 700). Engineering advice may be required.

Detail A 3mm generally Flange see page 13 Grating

4.0 Joint Sealant Where ACO Drain channel joints and fittings are to be sealed (where used in foul water applications or where impermeability is required) contact a sealant specialist for guidance on the most appropriate sealing compound to use.

14

Block or paving slabs See notes 2.0 and 3.0

Channel Wall


ACO CivicDrain® Channel Footpath Drainage SPECIFICATION CLAUSE Model specification clause The surface drainage system shall be ACO CivicDrain® Channel Footpath Drainage system as supplied by ACO Technologies plc; all materials and components within the scope of this channel system shall be obtained from this manufacturer. The system shall be certificated to Load Class ( * ) as defined in EN 1433:2002, load test certificates for both grating/cover and channel body shall be supplied to the Supervising Officer. The system shall be of 100mm nominal internal width.

The channels shall be installed with manufacturer’s grating appropriate to the Load Class of the place of installation and locked securely in place using the manufacturer’s locking system. The system shall be installed in accordance with the manufacturer’s printed instructions, and the work carried out as specified on drawing no. ( * ) and in accordance with recognised good practice. Standards of workmanship shall generally be as specified in BS EN 752:Parts 1-4 and BS 8000:Part 14:1989.

*

insert appropriate information

Note: Also available on our website for downloading

Technical Support Services To support architects, engineers and contractors in designing and installing ACO CivicDrain® Channel Footpath Drainage schemes, ACO Drain Design Services Department offers computer-aided scheme design, hydraulic performance calculations and installation advice services. Our Telephone Hotline 01462 816666, Fax Hotline 01462 851081, e-mail draintechnical@aco.co.uk and website www.aco.co.uk enable us to give you the response you need.

15


ACO Technologies Plc

International Enquiries

ACO Business Park, Hitchin Road, Shefford, Bedfordshire SG17 5TE

Tel: +44 (0)1462 816666 Fax: +44 (0)1462 850957 e-mail: international@aco.co.uk website: www.aco.co.uk

Tel: 01462 816666 Fax: 01462 815895 e-mail Sales: customersupport@aco.co.uk e-mail Technical: draintechnical@aco.co.uk website: www.aco.co.uk

Š April 2005 ACO Technologies Plc. All reasonable care has been taken in compiling the information in this document. All recommendations and suggestions on the use of ACO products are made without guarantee since the conditions of use are beyond the control of the Company. It is the customer's responsibility to ensure that each product is fit for its intended purpose, and that the actual conditions of use are suitable. This brochure and any advice is provided by ACO Technologies Plc (the Company) free of charge and accordingly on terms that no liability including liability for negligence will attach to the Company or its servants or agents arising out of or in connection with or in relation to this brochure or any such advice. Any goods supplied by the Company will be supplied solely upon its standard conditions of sale, copies of which are available on request. The Company's policy of continuous product development and improvement renders specifications liable to modification. Information provided in this brochure is therefore subject to change without prior notification.


Turn static files into dynamic content formats.

Create a flipbook
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.