Aluminium Bars - Extruded EN 755-2: 2008 Mechanical Properties Alloy
Temper
Extruded profiles
Round bardiameter
e (3) (10) mm above EN AW-1050A Al99,5 EN AW-2007 AlCu4PbMgMn EN AW-2011 AlCu6BiPb
EN AW-2014 AlCu4SiMn
to
F, H112 (4) O, H111 T4, T4510, T4511 (5) T4, T4510, T451 (5) T4, T4510, T451 (5) T4 (5) T6 (5) T6 (5) T6 (5) O, H111 T4, T4510, T4511 T4, T4510, T4511 T4, T4510, T4511 T4, T4510, T4511 T6, T4510, T6511 T6, T4510, T6511 T6, T4510, T6511 T6, T4510, T6511 T6, T4510, T6511 O, H111 T4, T4510, T4511 T6, T4510, T6511 T6, T4510, T6511
O, H111 T4, T4510, T4511 (5) T4, T4510, T4511 (5) T4, T4510, T4511 (5) T4, T4510, T4511 (5) T4, T4510, T4511 (5) O, H111 T4, T4510, T4511 (5) T4, T4510, T4511 (5) En AW-2024 O, H111 AlCu4Mg1 T3, T3510, T3511 T3, T3510, T3511 T3, T3510, T3511 T3, T3510, T3511 T8, T8510, T8511 O, H111 T3, T3510, T3511 T8, T8510, T8511 EN AW-5754 F, H112 (4) AlMg3 F, H112 (4) O, H111 EN AW-5083 F, (4) AlMg4.5Mn0.7 F, (4) O, H111 O, H112 F, (4) O, H111 O, H112 T4 (5)(Å) T6 (5) T6 (5)(Å) T6 (5)(Å) T6 (5)(Å) T4 (5)(H) T6 (5)(H) T6 (5)(H) T6 (5) T6 (5) T6 (5) T6 (5)
Extruded round bars
S (2) mm
e (3) mm
to
above
all all
En AW-2017A AlCu4MgSi(A)
EN AW-6005 AlSiMg
Dimensions square hexagonal bars
D (1) mm above
to
0 80 200 0 0 -
80 200 250 60 60 -
0 0 25 75 150 0 25 75 150 200
200 25 75 150 200 25 75 100 200 250
0 0 25 75 150 0 25 75 150 200
200 25 75 150 200 25 75 150 200 250
0 150 0 0 200 0 0
200 25 75 150 200 250
200 50 100 200 250 150
150 250 150 200 250 200 200
0 0 25 75 150 200
0 0 50 100 200 0
0 150 0 0 200 0 0
to
all all
80 200 250 200 75 200
0 0 50 100 200 0
above
all all
0 80 200 0 0 75
0 0 25 75 150 200
(extraction)
0
25
0
25
0 0 0 10
20 20 10
200 25 75 150 200 250 0 0 10
20 10 75
0 0 0 0
30 30 30 25
200 50 100 200 250 150
150 250 150 200 250 200 200
0
25 all all all all all all
0
25
0 5 10 0 0 5
5 10 25 10 5 15
25
50
25
50
0 50
25 100
0 50
25 100 0 5
5 10
Tensile strength
0.2% Proof stress
Rm
Rp 0.2
N/mm2
N/mm2
Elongation
A50 mm
A
% min.
% min.
Min.
Max.
Min.
Max.
60 60 370 340 330 275 310 295 310 370 410 390 350 415 460 465 430 420 370 415 40
95 250 250 450
20 20 250 220 210 125 230 195 230 230 270 250 230 370 415 420 350 320 230 370 -
135 135 400
25 25 8 8 7 14 8 6 6 12 13 12 10 8 6 7 7 6 5 12 11 7 -
23 23 6 12 6 4 10 11 5 10 10 5 6
380 400 390 370 360 380 400 450 440 420 400 455 420 455 180 180 180 270 260 270 270 270 270
250 250 250 250 250 -
260 270 260 240 220 260 270 310 300 280 270 380 290 380 80 70 80 110 110 110 125 110 110
135 135 150 150 -
12 12 10 9 8 7 12 12 10 12 8 8 8 8 5 12 8 5 14 13 17 12 12 14 12 12 14
10 10 10 10 8 10 6 4 10 6 4 12 15 10 12 10 10 12
270 180 270 270 260 250 180 255 250 270 260 270 260
-
125 90 225 225 215 200 90 215 200 225 215 225 215
-
12 15 8 8 8 8 15 8 8 10 8 8 8
10 13 6 6 6 13 6 6 8 6 6
(1) D = Diameter for round bars. (2) S = Cross section for square and hexagonal bars, plus thickness for flat profiles and bars. (3) e = Wall thickness. (4) F-Condition: The mechanical properties are only intended as a guide. (5) The properties can only be reached by shock cooling. 10) When a profile’s cross section consists of different wall thicknesses with different mechanical properties, the lowest specified value must be considered as the effective value for the whole profile.
Å = Open profile H = Hollow profile
More information on page 60
59