API 6A Valves & Manifolds by Mento-AS

Your trusted partner in API 6A Valves & Manifolds

Index 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22.

API 6A Gate Valve Hydraulic Actuated FC Gate Valve ESD API Gate Valve Hydraulic Actuated DA Gate Valve Materials & inlay Electric Actuated Gate Valve Mud Gate Valves Design & Manufacture of Manifolds Service & maintenance Spare parts API 6A Gate Valve specification Manual specification Hydraulic Actuated specification MV50 Mud Valve specification MV75 Mud Valve specification Torque to Flange & Bonnets Lubrication API 6A Valves & Manifolds Ring Gaskets Chart Gasket & Studs P/N Gasket & Studs Other API Valves & Manifolds

3 5 6 7 8 9 10 12 14 15 17 18 19 20 21 22 26 27 42 43 44 45

API 6A Gate Valve

API 6A Gate valves E-type through conduit gate valve

API 6A Gate valves

Anson through conduit gate valve was developed in 1991 to satisfy the need for a high-quality, high-specification valve. The E-Type is a true bi-directional valve with low operating torque. It is robust, easy to maintain, and is supported by Mento`s aftermarket teams. Anson gate valve technology is used across various applications -well testing, flowback, drilling, exploration, production, and well intervention. This field-proven design with multifunctionality makes the E-Type gate valve one of the most trusted valves in our ever-changing industry.

E-type through conduit gate valve

Specification

applications -well testing, flowback, drilling, exploration, production, and well intervention. This field-proven design with multifunctionality makes the E-Type gate valve one of the most trusted valves in our ever-changing industry.

•

API 6A monogramed

•

Qualified for Class lI Sand Service (API 6AV1)

•

Qualified for high-pressure/high-temperature (HPHT) service (API6A annex F PR2 to 350 deg F(177 deg. C)) and extreme low-temperature service (API 6A Annex F PR2 to -75’F)

Anson through conduit gate valve was developed • Uses no performance-limiting elastomers Specification in 1991 to satisfy the• need for a high-quality, high• Available from 2,000 to 20,000 psi in Uses no performance-limiting elastomers specification valve. The E-Type is 2,000 a true bi-directional • Available from to 20,000 psi in sizes 113/, 6 to 9-in. bore sizes 1 13/16” to 9-in. bore • Designed, manufactured and tested in accordance with API 6A Material dass, temperature range, product valve with low operating torque. It is robust, easy to specification level (PSL) as per API 6A Designed, manufactured and tested in maintain, and is supported by Mento`s aftermarket • • API 6A mongrammable accordance with API 6A Material class, • Qualified for Class lI Sand Service (API 6AV1) teams. • Qualified for high-pressure/high-temperature (HPHT) service (API 6AAnnex F PR2 to 350'F) and extreme low temperature range, product specification level temperature service (API 6A Annex F PR2 to -75'F) (PSL) as per API 6A Anson gate valve technology is used across various

API 6A Gate Valve features

Features

Body to bonnet seal:

Body and bonnet: Integral one-piece forged body and bonnet with minimal pressure boundary penetrations Gate and seat design: The seats in the E-Type gate valve are fully floating. This, combined with a solid slab gate, gives a true downstream seal resulting in exceptionally low operating forces. Gate and seat replacement are possible with the valve in line, without the need for special tools. Bi-directional sealing: The E-Type gate valve is a true bi-directional valve. Being fully symmetrical, it effectively seaIs pressure from either direction without the risk of pressure lock.

A seaI is achieved between the body and bonnet using metal-to-metal seaIing technology. The seaI is reusable. SeaIs: The E-Type gate valve uses high-performance PTFE seaIs with CRA spring energizer and uses no performance-limiting elastomers. Handwheel: The E-Type gate valve is supplied with a rugged handwheel that employs a double detent quickrelease mechanism. A shear pin is provided to protect the valve’s internals from damage and is replaceable without having to dismantle the valve or take it out of line.

PTFE stem packing (one piece)

Reusable metal bonnet seal

Grease injecton port above stem back seat

Forged body and bonnet PTFE seat seal for superior low-pressure performance Fully floating gate and single-piece seats, metal-to-metal primary sealing seal

Hydraulic Actuated FC Gate Valve

Hydraulically Actuated E-Type Gate Valves Fait-Safe Close and Fail-Safe Open

Fail-safe close (FSC) and fail-safe open (FSO) E-Type gate valves are designed with failsafe spring return actuators, offering a flexible solution for ernergency shutdown valves (ESD) and other fail-safe applications. Fluid is applied to one side of the piston to move the gate, and a spring within the cylinder generates the energy for the opposite motion. The fail-safe actuator is a self-contained unit that allows for quick removal from the valve bonnet if necessary when the valve is still under line pressure. The design also allows for quick and easy maintenance, and no drift adjustment is necessary to set the stroke.

Features •

Linear hydraulic single acting spring return

•

Normal operating pressure of 3,000 psi (4,500 psi max)

•

Translating hydraulic cylinder

•

Compact design

•

Hard-chrome plated cylinder

•

The T-slot connection between stem and gate

•

Multi-lipped pressure and spring energized stem seals

•

Fully weather sealed

•

Automatic back seating fire resistant

•

Twin guide bearings for stem

•

Pressure relief port above valve stem packing

•

No drift adjustment required to set the stroke

•

API 6A Annex F PR2F qualified

Options •

Safety head device fitted to prevent damage to valve or actuator

•

Can be supplied as part of an Emergency Shutdown Valve assembly

•

Quick exhaust valve can be included for optimal shutdown time

•

Position indication by rising stem, clear inspection plate or limit switch feedback

ESD API Gate Valve

Emergency Shutdown Valves We provide Anson E-Type fail-safe valves as part of a complete emergency Shutdown (ESD) valve assembly. Generally situated upstream of the choke manifold, the standalone ESD valve is used to safely and quickly isolate the downstream equipment from the high-pressure wellbore fluids. These valves are critical to protecting personnel, equipment and the environment. The ESD is used in conjunction with a control system to allow the valve’s remote operation. Closure times can be critical, and the ESD valve can be enhanced with the inclusion of a quick exhaust valve in the hydraulic return line, shutting the valve in less than five seconds.

Generally, the ESD valve will be supplied enclosed in a skid frame and include inlet and outlet crossovers. Skids can be provided per DNV 2.7-1. We also supply wellhead pneumatic surface safety valves, as part of our surface safety products (SSP) product line. lncluding Axelson’” type actuators, we have the most extensive offerings of remotecontrolled monitoring and actuator systems in the industry. Our SSP pneumatic actuator can be supplied with the Anson E-Type body and internals, incorporating two field-proven and trusted product lines.

Hydraulic Actuated DA Gate Valve

Double Acting Actuator Anson E-Type gate valves are available with double acting (DA) hydraulic actuators and double Acting with manual override (DAO). Fluid is supplied to connections below and above the piston, the pressure operates the valve, and in turn the gate to open or close.

Features •

Linear hydraulic double acting

•

Normal operating pressures of 1,500 or 3,000 psi

•

Compact design

•

Robust enclosure

•

Double hydraulic piston seaIs and guide rings

•

Fully weather sealed

•

Position Indication by a rising stem, limit switch feedback

Options •

Manual override (DAO) with a handwheel

•

Position lndication by a rising stem, limit switch feedback

Materials & inlay

Enhanced Corrosion Protection Additional corrosion protection can be applied to certain areas of the gate valve to increase the service life of the equipment. For material classes

DD through to FF, CRA 625 weld overlay can be applied to all ring grooves, body seat pockets, stem seaI and bonnet seal area.

Stem Seal Area

Bonnet Seal Area

Seat Pocket Seal Area

Ring Joint Seal Area

API 6A Materal Classes (Trim Levels) The table below shows the options available with the Anson E-Type gate valve. The trim level chosen is dependent on the severity of service anticipated Material Class AA BB DD* EE* FF* HH*

Body/Bonnet AISI4130 (API 75k) AISI4130 (API 75k) AISI4130 (API 75k) AISI4130 (API 75k) ASTMA182 F6NM (Mod) ASI4130 (API 75k) c/w CRA 625

over the lifetime of the valve. It is possible to upgrade a lower specification of E-Type should more severe service be encountered later in the valve’s life.

Gate/Seat AISI4130 (API 75k) ASTM A564 Type 630 (17-4PH) AISI4130 (API 75k) ASTM A564 Type 630 (17-4PH) ASTM A564 Type 630 (17-4PH) CRA 718

*Suitable for sour gas service and certified in accordance with NACE MR-01-75/ISO15156 NOTES: 1. Other material options are available on demand. 2 Grease fitting rated as per valve material class.

Stem AISI4140 hardened CRA718 or CRA725 AISI4140 hardened CRA718 or CRA725 CRA718 or CRA725 CRA718 or CRA725

Electric Actuated Gate Valve

E-Type Gate Valves – Upgrade to Remote Actuation Convert your existing Anson ™ E Type Manual Gate Valve to electric actuation with our Electric Actuation Conversion Kit . The kit can be easily installed without breaking the pressure seal between the bonnet and body , meaning post installation integrity testing is not necessary. Features and Benefits • Upgrade existing equipment without replacing the valve •

Simple conversion without breaking the body/bonnet seal

•

Remove personnel from the high pressure area

•

Introduce automation into your system

•

Position indication feedback

•

Torque output to highlight the need for upcoming valve maintenance

•

All major components are fully interchangeable with the manual

•

Version ( Body, Bonnet, Stem, Gate, etc)

Anson™ E-Type Gate Valves – Upgrade to Remote Actuation • Ultra reliable and low maintenance

Mento AS Kontinentalvegen 22, 4056 Tananger Phone: +47 48 11 03 00 Mail: post@mento.no www.mento.no

Convert your existing Anson™ E-Type Manual Gate Valve to electric actuation with our Electric Actuation Conversion Kit. The kit can be easily installed without breaking the

seal between the bonnet body, meaning post installation • pressureAlso available forandAnson ™ Mud Valvesintegrity testing is not necessary. Features and Benefits • Upgrade existing equipment without replacing the valve • Simple conversion without breaking the body/bonnet seal • Remove personnel from the high-pressure area • Introduce automation into your system • Position indication feedback • Torque output to highlight the need for upcoming valve maintenance • All major components are fully interchangeable with the manual version (Body, Bonnet, Stem, Gate, etc) • Ultra-reliable and low maintenance • Also available for Anson™ Mud Valves

Mud Gate Valves

Mud valves Our purpose-made Anson mud gate valves are suitable for the toughest demands of abrasive drilling mud service. We also provide piping for high pressure mud application and complete standpipe manifolds.

MV50: Suitable for a maximum working pressure of 5,000 PSI •

Available with various connections including butt weld, flange, hub, or hammer union

We offer two models of these easy-to-operate and simple-to-maintain valves—MV50 (suitable for up to 5,000-psi maximum working pressure) and MV75 (suitable for up to 7,500-psi maximum working pressure).

•

Molded, one-piece (boot) seat design particularly suited for abrasive service and applications where valve contamination by line fluid sediment is an issue

•

Nitride hardened stainless steel gate as standard

Mud Gate Valves

Mud valves

MV75: Solid disc design

MV75: Suitable for a maximum working pressure of 7,500 PSI •

Available with various connections including butt weld, flange, hub, or hammer union

•

One-piece, ‘disc type’ gate and seat design:

•

Suspended stainless steel discs molded with rubber, designed to dampen pulsation effect from mud pumps and extend the life of the valve

ng mud service. We also provide piping for high

up to 5,000-psi maximum working pressure) and

where valve by line fluid sediment • contamination Repeatable highand low-pressure sealing;

capable of passing the most stringent testing for this type of valve in the industry.

•

Nitride hardened stainless steel gate as standard

•

Cavity-less body design limits ingress of contaminants

mud pumps and extend the life of the valve

is type of valve in the industry.

• Highly qualified valve tested for repeatable low- and high-pressure sealing capability with gas both liquid and gas liquid and We can now deliver mud valves with electric actuator or proximity switches

MV75: Solid disc design

Design & Manufacture of Manifolds

Manifolds Fully customizable manifold assemblies for well service & control Mento have considerable experience in the design and manufacture of manifolds used across several applications and often to a bespoke design. The manifolds can be comprised of Anson gate valves, plug valves, Master flo choke valves, as well as API studded blocks and hammer union fittings. We design and assemble all the major components used within our manifolds, giving us full control over the project from start to finish. In addition to layout and design choices for manifolds, we also offer variations for the type of actuation to suit your requirements, either manual operation (handwheel) or choice of actuation, operated by a control system from a remote location. The most common manifolds that we produce is the standpipe and choke & kill manifold. These manifolds are used in several applications both onshore and offshore. They are an arrangement of shut off valves and choke valves, designed for controlling and reducing surface well pressure upstream of the process equipment. Two choke valves are incorporated within the assembly to allow the manifold to function at all times, even if service needs to performed on one of them.

All engineering and production is done in Mento`s facilities in Norway •

Diverter manifolds

•

Debris catcher manifolds

•

Choke and kill systems

•

Managed pressure drilling systems

•

Sand management systems

•

Process equipment

•

BOP arrangement

•

Standpipe manifolds

•

Cement manifolds

r emote s are es, are d on

Manifolds

Mento design and manufacture manifolds to our own or customers’ designs. These manifolds are used for various applications and are made up of high end OEM valves , fittings & flowline Choke & kill manifold

or hammer union type. The manifold comprises of mud gate valves, forged manifold fittings, bleed off choke, pressure sensors and local pressure gauges. A choke manifold is the primary means of controlWe use mud gate valves from Anson and choke ling surface well flow and pressure using a system of shutoff valves and choke valves. Dependent upon valves from Master flo as standard. work with you to ensure that the design is the application, shut valves would either be own We We the design andoff manufacture manifolds to our or customers’ designs. These manifolds perfectly to your application. Anson plug valves orfor E-type gate valves and are used various applications and choke are made up of high end suited OEM valves , fittings & valves. Using flowline a mix of adjustable (with handwheel/ actuated) or positive (fixed bean) choke valves, the Debris catcher manifold Choke & kill manifold manifold controls the flow rate and reduces well A choke manifold is the primary means of controlling surface well flow and pressure using a system of shutoff valves and of choke valves. Dependentprocessing upon the application, the shut off valves would either be Anson plug valves or E-type pressure ahead downstream equipThe debris catcher (Junk catcher) manifold is used in gate valves and choke valves. Using a mix of adjustable (with handwheel/ actuated) or positive (fixed bean) choke ment. flowback operations to protect downstream equipvalves, the manifold controls the flow rate and reduces well pressure ahead of downstream processing equipment. ment from impact damage from large particles. The The number of valves, configuration of the manifold, and choice of actuation are customizable. We work with you to The number of valves, configuration of the maniensure that the design is perfectly suited to your application. manifold is comprised of either Anson plug valves fold, and choice of actuation are customizable. We or e-type gate valves and an Mento design debris Standpipe manifold work with you to ensure that the design is perfectly A mud standpipe manifold is installed downstream of the mud pumps with the purpose diverting the flow drillingcatcher) or dual catcher. This canof be single legof(one toward the drill line or drill string. suited to yourfluids application. leg (two catchers). The dual leg design enables Standpipe manifolds are designed and manufactured to suit customer requirements and are available in working zero downtime, as when one pressure up to 7500 psi. Construction is available in weld end, flange end, hub end or hammer union type. Thestrainer line is being manifold comprises of mud gate valves, forged manifold fittings, bleed off choke, pressure sensors and local pressure cleared the other strainer can be used. Standpipegauges. manifold We use mud gate valves from Anson and choke valves from Master flo as standard. We work with you to ensure that the design is perfectly suited to your application.

A mud standpipe manifold is installed downstream The debris catcher contains a filter (screen) that Debris catcher manifold catches and retains large solids. The debris catcher (Junk catcher) manifold is used in flowback operations to protect downstream equipment fromAs part of the of the mud pumps with the purpose of diverting impact damage from large particles. The manifold is comprised of either Anson plug valves or e-type gate valves and flowback system, the debris catcher manifold is the flow of drilling toward the an Mentofluids design debris catcher. Thisdrill can beline singleor leg drill (one catcher) or dual leg (two catchers). The dual leg design positioned upstream enables zero downtime, as when one strainer line is being cleared the other strainer can be used. of the choke manifold to string. protect the chokes and equipment downstream. Standpipe manifolds are designed manufacThe debris catcher contains a filterand (screen) that catches and retains large solids. As part of the flowback system, the debris catcher manifold is positioned and upstream the choke manifold to protect the chokes and equipment tured to suit customer requirements areofavaildownstream. Mento`s debris catchers are available with fine able in working pressure up to 7500 psi. Construcmesh filters withparticles the screen to remove Mento`s debris catchers are available withhub fine mesh with the screenincluded to remove smaller from tion is available in weld end, flange end, endfilters included the process flow. smaller particles from the process flow.

Service & maintenance

Service & maintenance Regularly scheduled maintenance increases the reliability and longevity of your equipment in addition to reducing the total cost of ownership. Mento`s fully equipped facilities can accommodate all your service needs. As an added feature of our service and maintenance program, we offer long-term service and maintenance contracts. Re-certification means that a product is inspected and tested in accordance with the OEM specifications, third-party documentation, and with parts fitted that comply with the original specification and certification. We also have an online valve management system software to support our activities, where you as client can have your own log-in. We can perform the job either onshore in our workshop or offshore on rig/ platforms

Repairs, recertifications, and rebuilds Our service shops provide turnkey engineering solutions to repair, update, or standardize your original designs. This ensures that you are receiving the technical knowledge and latest advances for your worn or cold-stacked equipment.

Training To operate equipment at maximum performance and efficiency, we offer in-house, at-your-facility, or on-the-job training. Our structured educational programs are facilitated by industry experts calling on real-world experience and educating through actual scenarios. Our programs can be tailored to meet safety, maintenance, and operational performance per OEM standards.

Rental Equipment We offer a broad range of rental equipment, including flowline, hoses and filtration systems.

Technical Support Our support team is based in Bergen and available 24 hours a day, enabling an immediate response to client needs. Our support center help maximize the efficiency of our customers’ operations anytime and anywhere in the world. In addition, we have a dedicated professional engineering team to support our clients, which demonstrates our level of commitment to providing high-quality services.

10.

Spare parts

Spare parts The Anson gate & mud valve range has been designed on a modular basis making numerous components interchangeable across sizes and pressure ratings. The result of this has been to significantly reduce the cost of manufacture of both valves and spare parts. Substantial savings are made and passed on to the customer in the form of competitively priced valves and spare parts. We at Mento understand your need for minimizing costly downtime and have invested heavily in building up a complete stock of valves and spare parts locally in Norway. As your equipment moves into the field, we are standing by to support you with some of the best customer service in the industry. Our highly trained service technicians are available to help to keep your operations running smoothly.

Advice is freely given in the full knowledge that we at Mento can also benefit from an operator’s practical experience, as it is mainly from feedback from the end user that improvements can be made. Listening to what our customers have to say is and shall remain the cornerstone of our business. Always use OEM parts to ensure that you get the best out of our equipment and the intended life of the product.

10.

Spare parts

Gat e valve specificat ion • EE-360 Trim, • L-X temp range, • PSL 3, • Inconel ring grooves & seat pocket, • DNV OS-E101 Cat. 1 Certification P/N Valve

Descript ion

Mat erial descript ion

GA21605LXE3 Anson GV 2.1/16"5K INCB10001 FLG ENDS E-TYPE MK2 GA29605LXE3 Anson GV 2.9/16"5K INCB007 FLG ENDS E-TYPE MK2 GA31805LXE3 Anson GV 3.1/8" 5K INCB10001 FLG ENDS E-TYPE MK2 GA41605LXE3 Anson GV 4.1/16"5K INCB007 FLG ENDS E-TYPE MK2 GA21610LXE3 Anson GV INCB10001 2.1/16"10K FLG ENDS E-TYPE MK2 GA29610LXE3 Anson GV INCB10001 2.9/16"10K FLG ENDS E-TYPE MK2 GA31610LXE3 Anson GV INCB10001 3.1/16"10K FLG ENDS E-TYPE MK2 GA41610LXE3 Anson GV INCB007 4.1/16"10K FLG ENDS E-TYPE MK2 GA21615LXE3 Anson GV INCB10001 2.1/16"15K FLG ENDS E-TYPE MK2 GA29615LXE3 Anson GV INCB10001 2.9/16"15K FLG ENDS E-TYPE MK2

5 000 PSI Anson GV 2.1/16"5K FLG ENDS E-TYPE MK2 EE-360 L-X PSL3 CRA625 RTJ & SEAT PKTS 21th edition Anson GV 2.9/16" 5K FLG ENDS E-TYPE MK2 EE-360 L-X PSL3 CRA625 RTJ & SEAT PKTS 20th edition Anson GV 3.1/8"5K FLG ENDS E-TYPE MK2 EE-360 L-X PSL3 CRA625 RTJ & SEAT PKTS 21th edition Anson GV 4.1/16"5K FLG ENDS E-TYPE MK2 EE-360 L-X PSL3 CRA625 RTJ & SEAT PKT 20th edition 10 000 PSI ANSON GV 2 1/16" 10K FLG ENDS ETYPE MK2 EE-360 L-X PSL3 CRA625 RTJ & SEAT PKTS 21th edition Anson GV 2.9/16"10K FLG ENDS E-TYPE MK2 EE-360 L-X PSL3 CRA625 RTJ & SEAT PKTS 21th edition Anson GV 3.1/16"10K FLG ENDS E-TYPE MK2 EE-360 L-X PSL3 CRA625 RTJ & SEAT PKTS 21th edition Anson GV 4.1/16"10K FLG ENDS E-TYPE MK2 EE-360 L-X PSL3 CRA625 RTJ & SEAT PKTS 20th edition 15 000 PSI Anson GV 2.1/16"15K FLG ENDS E-TYPE MK2 EE-360 L-X PSL3 CRA625 RTJ & SEAT PKTS 21th edition Anson GV 2.9/16"15K FLG ENDS E-TYPE MK2 EE-360 L-X PSL3 CRA625 RTJ & SEAT PKTS 21th edition

Bolt s P/N

Ring joint P/N

Seal kit P/N

Redress kit P/N

L7G7SB2XN7/8" R024RO6 X155

72136

72135

L7G7SB2XN1"X R027RO6 165

N/A

73976

L7G7SB2XN11/8 R035RO6 "X200

71699

71756

N/A

L7G7SB2XN3/4" R152BX6 X140

70907

70909

L7G7SB2XN7/8" R153BX6 X155

N/A

82880

L7G7SB2XN1"X R154BX6 180

70915

70916

L7G7SB2XN7/8" R152BX6 X155

70907

70908

L7G7SB2XN1"X R153BX6 180

N/A

88272

70913

70914

L7G7SB2XN11/4 R039ROV6 "X210

L7G7SB2XN11/8 R155BX6 "X210

GA31615LXE3 Anson GV Anson GV 3.1/16"15K FLG ENDS E-TYPE L7G7SB2XN11/8 R154BX6 INCB10001 3.1/16"15K FLG MK2 EE-360 L-X PSL3 CRA625 RTJ & "X200 ENDS E-TYPE MK2 SEAT PKT 21th edition Mud valve specificat ion • Super trim, • MSL3 • But weld ends • DNV OS-E101 Cat. 1 Certification P/N Valve A25593

A75574-3

Descript ion Anson 3" X 3" Mud valve MV50, 5000PSI Anson 5" X 4" Mud valve MV50,

A88727-3

Anson 2" X 2" Mud valve MV75, 7500PSI A88601-3 Anson 2" X 3" Mud valve MV75, A82205-3-001- Anson 3" X 3" Mud 00 valve MV75, 7500PSI A82303-3 Anson 3" X 4" Mud A82302-3

valve MV75, 7500PSI Anson 4" X 5" Mud valve MV75,

Mat erial descript ion

Bolt s P/N

Ring joint P/N

Seal kit P/N

Redress kit P/N

TBA

N/A

Anson 5"x4" Sch.XXS MV50, super trim MSL3 P-U, BW 7 500 PSI Anson 2" Sch. XXS MV75, Super trim, MSL3 P-U, BW

TBA

N/A

TBA

N/A

Anson 2" X 3" Sch. XXS, Super trim, MSL3 P-U, BW Anson 3" X 3" Sch. XXS, Super trim, MSL3 P-U, BW

TBA

N/A

TBA

N/A

Anson 3" x 4" Sch. XXS, Super trim, MSL3 P-U, BW Anson 4" X 5" Sch. XXS, Super trim, MSL3 P-U, BW

TBA

N/A

TBA

A77747

A77748

5 000 PSI Anson 3" Sch.XXS MV50, super trim MSL3 P-U, BW

11.

API 6A Gate Valve specification

API 6A Products Mento only supplies the highest quality API 6A valves They have been designed to be strictly in accordance with the following standards: MSS-SP75

Specifications for High test Wrought Butt Weld Fittings.

ANSI B31.3

Chemical Plant and Petroleum Refinery Piping.

ANSI 16.9

Factory made Wrought Steel Butt Weld Fittings.

NACE MR-01-75

Sulphide Stress Cracking Resistant Metallic Materials for Oil Field Equipment.

API Products API6A6A

Specifications for Wellhead and Christmas Tree Equipment.

Mento only supplies the highest quality API 6A Products including flanges and studded blocks . Flanges available are weld neck, target, blind & test blind.

All API 6A equipment can be specified with the following:

They have been designed to be strictly in accordance with the following standards: MSS-SP75 Specifications test4Wrought Butt Weld Fittings. PSL level 1,for2,High 3 or ANSI B31.3 Chemical Plant and Petroleum Refinery Piping. ANSI 16.9 Factory made Wrought Steel Butt Weld Fittings. Material Class, AA, BB, CC, DD, EE-NL NACE MR-01-75 Sulphide Stress Cracking Resistant Metallic Materials for Oil Field Equipment. API 6A Specifications for Wellhead and Christmas Tree Equipment.

PR-1 or PR-2

All API 6A equipment can be specified with the following: Temperature PSL level 1, 2, 3 or 4 classes: K thru Y (-60degC to 345degC) Material Class, AA, BB, CC, DD, EE-NL or PR-2 See the tables below for the PR-1 dimensional data of standard Valve sizes. Please note Temperature classes: K thru Y (-60degC to 345degC)

that these are lists of only the most common sizes stocked. If you have any requirements for specific sizes or special materials See the tables below for the dimensional data of standard flange sizes. Please note that these are lists of that are not in the lists please contact us and we will be more than happy to assist. Mento are capable of only the most common sizes stocked. If you have any requirements for specific sizes or special materials that are not in the lists please contact us and we will be more than happy to assist. Mento are capable of supplying all supplying all API sizes. API sizes.

12.

Manual specification

API 6A Manual Gate Valve API 6A Manual Gate Valve

Table 1.1 API 6A Manual gate valve dimensions

API ring gasket Valve size 2-1/16” 5K R-24 2-9/16” 5K R-27 3-1/8” 5K R-35 4-1/16” 5K R-39 5-1/8” 5K R-44 1-13/16” 10K BX-151 2-1/16” 10K BX-152 2-9/16” 10K BX-153 3-1/16” 10K BX-154 4-1/16” 10K BX-155 5-1/8” 10K BX-169 1-13/16” 15K BX-151 2-1/16” 15K BX-152 2-9/16” 15K BX-153 3-1/16” 15K BX-154 4-1/16” 15K BX-155

Bore diameter(A) 2.06” 2.56” 3.12” 4.06” 5.12” 1.81” 2.06” 2.56” 3.06” 4.06” 5.12” 1.81” 2.06” 2.56” 3.06” 4.06”

Face to face(B) 14.62” 16.62” 18.62” 21.62” 28.62” 18.25” 20.50” 22.25” 24.38” 26.38” 29.00” 18.00” 19.00” 25.00” 23.56” 29.00”

Centerline to Extreme body base(C) diameter(D) 5.88” 7.25” 6.50” 7.75” 7.88” 9.62” 10.12” 10.75” 13.00” 14.12” 5.30” 8.25” 5.75” 8.25” 6.88” 9.25” 8.06” 10.25” 9.88” 12.25” 13.00” 14.12” 5.38” 8.25” 6.12” 8.25” 7.12” 10.25” 9.00” 12.00” 10.50” 13.00”

Centerline to handwheel(E) 14.44” 15.38” 16.25” 17.88” 24.12” 14.25” 14.44” 15.38” 16.25” 20.50” 24.12” 14.25” 14.44” 17.88” 19.00” 23.00”

Handwheel Turns to Weight dia(F) open (kGs) 12.00” 13,5 92 16.00” 15.5 127 16.00” 18 165 20.00” 24 262 24.00” 23.5 686 16.00” 12 115 16.00” 13.5 118 16.00” 15.5 150 20.00” 18 230 24.00” 24 416 24.00” 23.5 670 16.00” 12 127 16.00” 14 136 20.00” 16 207 20.00” 19 380 24.00” 20 619

13.

Hydraulic Actuated specification

API 6A Hydraulic Gate Valve API 6A Hydraulic Gate Valve

Table 1.2 API 6A Hydraulic gate valve dimensions

Valve size 2-1/16” 5K 3-1/8” 5K 4-1/16” 5K 5-1/8” 5K 2-1/16” 10K 3-1/16” 10K 4-1/16” 10K 5-1/8” 10K 2 1/16" 15K 3 1/16" 15K 4 1/16" 15K

API ring gasket R-24 R-35 R-39 R-44 BX-152 BX-154 BX-155 BX-169 BX-152 BX-154 BX-155

Bore diameter(A) 2.06” 3.12” 4.06” 5.12” 2.06” 3.06” 4.06” 5.12” 2.06” 3.06” 4.06”

Face to face(B) 14.62” 18.62” 21.62” 28.62” 20.50” 24.38” 26.38” 29.00” 19.00" 23.56" 29.00"

Centerline to Extreme body base(C) diameter(D) 6.00” 7.25” 7.88” 9.62” 10.13” 10.75” 13.00” 14.12” 5.75” 8.25” 8.06” 10.25” 10.50” 12.25” 13.00” 14.12” 6.12" 9.00" 10.50" -

Centerline to top(E) 20.50” 23.45” 25.97” 34.12” 20.50” 23.45” 29.78” 34.12” 20.50" 28.19" 33.56"

Actuator Weight( dia(F) kGs) 7.87” 110 7.87” 183 7.87” 280 11.25” 805 7.87” 134 7.87” 250 10.75” 474 11.25” 789 152 436 736

14.

MV50 Mud Valve specification

5,000 PsiPsi MudMud Valves Butt Weld Ends 5,000 Valves Butt Weld Ends

Table 1.3- 5,000 PSI BW Mud valve dimensions

Valve size 2" x 2" sch XXS 3" x 3" sch XXS 4" x 4" sch XXS 5" x 4" sch XXS

Bore diameter at seat(A) End to end(B) 2.00" 9.00" 3.00" 11.00" 4.00" 13.00" 4.00" 13.00"

Centerline to Centerline to Handwheel base(C) top(D) dia(E) 13.00" 14.00" 2.88" 18.00" 18.00" 4.00" 24.63" 23.00" 5.12" 24.63" 23.00" 5.12"

Weight 28 64 95 100

5,000 PSI Mud Valves API 6A Flanged Ends 5,000 PSI Mud Valves API 6A Flanged Ends

Table 1.5- 5,000 PSI API 6A Flanged Mud valve dimensions

Valve size 2" 3" 4" 4"

API 6A flange size 2-1/16” 5K 2-9/16” 5K 4-1/16” 5K 4-1/16” 5K

RTJ type R24/ RX24 R27/ RX27 R39/ RX39 R39/ RX39

End to end(A) 12.12" 20.00" 18.00" 23.50"

End to end dimension can be modified acc. to customer requirements

Centerline to Centerline to Handwheel base(C) top(D) dia(E) 2.88" 13.00" 14.00" 4.00" 18.00" 18.00" 5.12" 24.63" 23.00" 5.12" 24.63" 23.00"

Bore diameter at Flange dia(F) seat(A) 8.50" 2.00" 9.62" 3.00" 12.25" 4.00" 12.25" 4.00"

Weight 50 98 150 157

15.

MV75 Mud Valve specification

7,500 PsiPsi MudMud ValvesValves Butt Weld Butt Ends Weld Ends 7,500

Table 1.4- 7,500 PSI BW Mud valve dimensions

Valve size 2" x 2" sch XXS 3" x 3" sch XXS 4" x 3" sch XXS 5" x 4" sch XXS 6" x 5" sch XXS

Bore diameter at seat(A) End to end(B) 2.00” 14.00” 3.00” 16.00” 3.00” 16.00” 4.00” 16.00” 5.00” 17.88”

Centerline to Centerline to Handwheel base(C) top(D) dia(E) 3.25” 11.88” 14.00” 4.88” 18.13” 18.00” 4.88” 18.13” 18.00” 5.12” 24.63” 23.00” 5.75” 30.64” 26.00”

Weight 54 110 110 160 270

7,500 PSI Mud Valves API 6A Flanged Ends 7,500 PSI Mud Valves API 6A Flanged Ends

Table 1.6- 7,500 PSI API 6A Flanged Mud valve dimensions

Valve size 2” 3” 3” 5” 5”

API 6A flange size 2-1/16” 10K 2-9/16” 10K 3-1/16” 10K 4-1/16” 10K 5-1/8” 10K

RTJ type BX-152 BX-153 BX-154 BX-155 BX-169

End to end(A) 13.50” 22.25” 27.12” 29.12” 29.00”

End to end dimension can be modified acc. to customer requirements

Centerline to Centerline to Handwheel base(C) top(D) dia(E) 3.25” 11.88” 14.00” 4.87” 18.13” 18.00” 4.87” 18.13” 18.00” 7.00” 24.63” 23.00” 5.75” 30.64” 26.00”

Bore diameter at Flange dia(F) seat(A) 7.88” 2.00” 9.12” 3.00” 10.62” 3.00” 12.44” 4.00” 14.06” 5.13”

Weight 70kg 155kg 162kg 250kg 375Kg

16.

Torque to Flange & Bonnets

Applying Torque to Flanges & Bonnets Scope 1. This specification details the requirements for controlled bolting of API 6A Flange connections and Gate Valve Bonnets including methods that shall be used when applying controlled bolting to these connections. 2. Values stipulated in the enclosed tables 1 and 2 (Flange Connections) are extracted from values recommended in API 6A 19thedition Application 3. This document shall be used as an internal procedure for assembly of the above connections for API 6A equipment. 4. If issued to end users of this equipment it may be used as a recommended practice. Procedure 5. Prepare the connection for assembly, RTJ grooves and Bonnet seal areas should be clean and free from foreign matter. 6. API Flanges-Place a seal into one of the flanges and bring the two flanges together. Seals must be free of all grease. If the configuration of the connection is such that the seal may fall out of position during the mating of the two halves, the seal may be held in position using a thin stiff card that can be easily withdrawn once the two alves are together.

7. Gate Valve Bonnets-The recommended method is to install the seal onto the body seal area then lower the bonnet over the studs locating over the seal and body. Grease should NOT be applied to the seal or seal areas. 8. Place the required quantity of studs c/w nuts into the connection, threads and nut face should be lubricated during assembly, make up hand tight. (Ref. Lubrication Section). 9. Torque shall be applied to the connection using one of the following methods • Torque wrench and socket. • Calibrated hydraulic torque equipment. 10. The required final torque setting for the connection shall be obtained from table 1, table 2 for Flange connections and table 3 Bonnet Connections. Torque shall be applied to each nut on the connection in the sequence shown in fig 1 at 25% of this figure. 11. Torque shall then be applied at 50%, then 75% and final 100% of the required torque using the same sequence. As an aid to assembly each bolting position in the connection shall be numbered in this sequence. Reccomended lubricant on the studding: Clare Autolube

16.

Torque to Flange & Bonnets

Applying Torque to Flanges & Bonnets Tightening Sequence

4 7

1 3

8 off

20 off

5 19 16

16 off 14

12 off 6

21 14

1 7

8 24

24 off 11

16 5

10 2

22 18

16.

Torque to Flange & Bonnets

Table 1 - Low Strength Studding (API Flanges)

NOTE–Low studding is identified with (API an “M”Flanges) designation after the material grade eg. Table 1-strength Low Strength Studding NOTE–Low strength studding A320 L7MA193 B7M is identified with an “M” designation after the material grade eg. A320 L7MA193 B7M

Bolt size Bolt Tension lbs. 1/2”-13UNC 5,676 5/8”-11UNC 9,026 3/4”-10UNC 13,378 7/8”-9UNC 18,469 1”-8UNC 24,23 1.1/8”-8UN 31,618 1.1/4”-8UN 39,988 1.3/8”-8UN 49,34 1.1/2”-8UN 59,674 1.5/8”-8UN 70,989 1.3/4”-8UN 83,286 1.7/8” –8UN 95,565 2”–8UN 110,825 2.1/4”-8UN 142,292 2.1/2”–8UN 177,685

Make Up Torque ft.lbf Make Up Torque ( f =0.07)* ft.lbf ( f =0.13)* 27 45 52 88 90 153 143 243 213 361 305 523 421 726 563 976 733 1,278 934 1,635 1,169 2,054 1,44 2,539 1,75 3,094 2,496 4,436 3,429 6,118

Table 2-2High Strength StuddingStudding (API Flanges)(API Flanges) Table - High Strength Bolt size Bolt Tension lbs. 1/2”-13UNC 7,45 5/8”-11UNC 11,865 3/4”-10UNC 17,559 7/8”-9UNC 24,242 1”-8UNC 31,802 1.1/8”-8UN 41,499 1.1/4”-8UN 52,484 1.3/8”-8UN 64,759 1.1/2”-8UN 78,322 1.5/8”-8UN 93,173 1.3/4”-8UN 109,313 1.7/8”-8UN 126,741 2”-8UN 145,458 2.1/4”-8UN 186,758 2.1/2”-8UN 233,212

Make Up Torque ft.lbf Make Up Torque ( f =0.07)* ft.lbf ( f =0.13)* 35 59 68 115 118 200 188 319 279 474 401 686 553 953 739 1,281 962 1,677 1,226 2,146 1,534 2,696 1,89 3,332 2,297 4,061 3,276 5,822 4,5 8,030

and44-* Column Column 33 and (f ==0.07) 0.07)–Studs –Studsand andNuts Nuts coated with PTFE or similar coating. (f coated with PTFE or similar coating. (f ==0.13) 0.13) –Bare –Bare metal metalstuds studsand andnuts nuts well lubricated with compound tested in accordance ISO 13678 (f well lubricated with compound tested in accordance with with ISO 13678

16.

Torque to Flange & Bonnets

Table 1- Gate Valve Bonnet Torque –For High St Table 1 - Gate Valve Bonnet Torque – For High Strength Studding Valve flange 1.13/16” “ 2.1/16” “ “ “ 2.9/16” “ “ “ 3.1/8” “ “ 3.1/6” “ 4.1/16” “ “ “ 5.1/8” “ “ “ 7.1/16” “ “ “ “ “ “ NA 9”

Valve bore 1.13/16” “ “ “ “ “ 2.9/16” “ “ “ 3.1/8” “ “ 3.1/16” “ 4.1/16” “ “ “ 5.1/8” “ “ “ 6.3/8” “ “ “ 7.1/16” “ “ 7.3/8” 9”

Rating(PSI) Stud size No. Studs 10,000 7/8 9UNC 15,000 7/8 9UNC 3,000 7/8 9UNC 5,000 7/8 9UNC 10,000 7/8 9UNC 15,000 1" 8UN 3,000 3/4" 10UNC 5,000 3/4" 10UNC 10,000 1" 8UN 15,000 1.1/8” 8UN 2,000 3/4" 10UNC 3,000 3/4" 10UNC 5,000 7/8” 9UNC 10,000 1.1/8” 8UN 15,000 1.3/8” 8UN 3,000 1.1/8” 8UN 5,000 1.1/8” 8UN 10,000 1.3/8” 8UN 15,000 1.1/2” 8UN 3,000 1.3/8” 8UN 5,000 1.3/8” 8UN 10,000 1.3/8” 8UN 15,000 1.3/4” 8UN 3,000 1.1/4” 8UN 5,000 1.1/4” 8UN 10,000 1.3/8” 8UN 15,000 1.3/4” 8UN 5,000 1.3/8” 8UN 10,000 1.1/2” 8UN 15,000 1.3/4” 8UN 10,000 1.1/2” 8UN 3,000 1.1/4” 8UN

Torque 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 12 8 8 8 12 12 12 12 16 12 12 16 12 12

200 300 100 150 225 375 125 175 325 550 100 125 250 450 950 275 450 800 1150 500 850 1250 1825 375 625 1225 2275 975 1600 2775 1600 700

NOTE–for A193.B7/A194.2H & A320.L7 / A194 Gr 7 Combinations only. Different values are required from NA controlled M designated studs and nuts. NOTE–for uncoated nuts only using f=0.08

NOTE–for A193.B7/A194.2H & A320.L7 / A194 Gr 7 Combinations only. Different values are required fromNACE controlled M designated studs and nuts. NOTE–for uncoated nuts only using f=0.08

17.

Lubrication

Lubrication schedule Lubrication schedule

Product type

Component

Maintenance leaflet

Body cavity E-type Gate valve(Manual)

Bearing housing

Lubrication safety leaflet

17537*** 24104***

PD106 PD168

Lubricate through Every 20-50 grease fitting on operation or bonnet 2 months

45368#

D0815#

Lubricate through Every 20-50 grease fitting on operation or bearing housing 2 months

45368#

D0815#

Pack on assembly

PD106 PD168

Lubricate through Every 20-50 grease fitting on operation or bonnet 2 months

D0815#

Lubricate through grease fitting on Every 20-50 hub or screw operation or housing 2 months

M27, M57

Gear box E-type Gate valve(Actuated) Body cavity M45, M49

Mud valve

Lubricant p/n

Screw threads & M30, M31, bearings M43, M46, M47

17537*** 24104***

45368#

Method of application

Lubrication period*

During valve overhaul

*The lubrication period should be considered as a minimum requirement under favourable operating conditions. Severe service may require a more *The lubrication period should be as aand minimum requirement favourable operating service may require a more frequent frequent application of lubricant. Inconsidered particular gate plug valves being usedunder on sandy or abrasive serviceconditions. or high flowSevere rates will require more application of lubricant. In particular gate and plug valves being used on sandy or abrasive service or high flow rates will require more frequent frequent application of body filler / sealant. application body filler / sealant. ** Plug Valveofsealant / grease will oxidise or become contaminated during normal use of the valve. Oldsealant cannot be totally displaced by reinjection. Valves must be dismantled and serviced to remove old sealant. *** 17537 forsealant API temp range P-X; fororAPI range contaminated K-L ** Plug Valve / grease will24104 oxidise become during normal use of the valve. Oldsealant cannot be totally displaced by re-injection. Valves must be dismantled and serviced to remove old sealant. *** 17537 for API temp range P-X; 24104 for API range K-L

18.

API 6A Valves & Manifolds

API 6A Products Mento only supplies the highest quality API 6A Products including flanges and studded blocks. Flanges available are weld neck, target, blind & test blind. They have been designed to be strictly in accordance with the following standards: MSS-SP75

Specifications for High test Wrought Butt Weld Fittings.

ANSI B31.3

Chemical Plant and Petroleum Refinery Piping.

ANSI 16.9

Factory made Wrought Steel Butt Weld Fittings.

NACE MR-01-75

Sulphide Stress Cracking Resistant Metallic Materials for Oil Field Equipment.

API 6A Products API 6A

Specifications for Wellhead and Christmas Tree Equipment.

Mento only supplies the highest quality API 6A Products including flanges and studded blocks . Flanges available are weld neck, target, blind & test blind.

All API 6A equipment can be specified with the following:

They have been designed to be strictly in accordance with the following standards: Specifications PSL level 1,for 2, High 3 ortest 4 Wrought Butt Weld Fittings. ANSI B31.3 Chemical Plant and Petroleum Refinery Piping. ANSI 16.9 Factory made Wrought Steel Butt Weld Fittings. Material Class, AA, BB, CC, DD, EE-NL NACE MR-01-75 Sulphide Stress Cracking Resistant Metallic Materials for Oil Field Equipment. API 6A Specifications for Wellhead and Christmas Tree Equipment. MSS-SP75

PR-1 or PR-2

All API 6A equipment can be specified with the following: Temperature PSL level 1, 2, 3 or 4classes: K thru Y (-60degC to 345degC)

Material Class, AA, BB, CC, DD, EE-NL PR-1 or PR-2 the dimensional data standard flange sizes. Please note Temperature classes: K thruof Y (-60degC to 345degC)

See the tables below for that these are lists of only the most common sizes stocked. If you have any requirements for specific sizes or special materials See the tables below for the dimensional data of standard flange sizes. Please note that these are lists of that are not in the lists please contact us and we will be more than happy to assist. Mento are capable of only the most common sizes stocked. If you have any requirements for specific sizes or special materials that are not in the lists please contact us and we will be more than happy to assist. Mento are capable of supplying all supplying all API sizes. API sizes.

18.

API 6A Valves & Manifolds

Section 1. API 6A TYPE 6B, 6BX Flanges and Studded Crosses and Tees Flanges and Studded Blocks are designed and manufactured in accordance with the following specifications:API 6A

Specification for Wellhead and Christmas Tree Equipment.

ANSI B31.3

Chemical Plant and Petroleum Refinery Piping.

ASME VIII

Boiler and Pressure Vessel Code.

MSS-SP-55

Quality Standards for Steel Castings for Valves, Flanges and Fittings and other

Piping Components.

NACE MR-01-75

Sulphide Stress Cracking Resistant Metallic Materials for Oilfield Equipment.

Flanges are available as Weld Neck, Integral, Blinds, Target & Test Blinds for use with the following pressure ratings:-

18.

API 6A Valves & Manifolds

samt innledende tekst som på Word formatet Max Working pressure 5 000 PSI 10 000 PSI 15 000 PSI 20 000 PSI Test pressure 7 500 PSI 15 000 PSI 22 500 PSI 30 000 PSI Product specification levels 1, 2, 3 & 4 1, 2, 3 & 4 1, 2, 3 & 4 1, 2, 3 & 4 API temperature K(-60 deg. C) to K(-60 deg. C) to K(-60 deg. C) to K(-60 deg. C) to rati ng Y(+345 deg. C) Y(+345 deg. C) Y(+345 deg. C) Y(+345 deg. C) Intergral, blind, target blind & test flanges and studded blocks Min. Yield 60 000 PSI 60 000 PSI 75 000 PSI 75 000 PSI Min. Tensile 85 000 PSI 85 000 PSI 95 000 PSI 95 000 PSI samt tekst som på Word formatet Max Materiinnledende al API 60K API 60K API 75K API 75K Working Weld neck flanges pressure PSI000 20PSI 000 PSI Min. Yield 5 000 PSI 10 45 000 000 PSI PSI 15 00060 75 000 PSI 75 000 PSI Test 7 500 PSI 15 PSI000 30PSI 000 PSI Min.pressure Tensile 70 000 000 PSI PSI 22 50085 95 000 PSI 95 000 PSI Product Materi al API 45K API 60K API 75K API 75K specificat i on levels K(-60 1, 2, 3deg. & 4 K(-60 1, 2, 3deg. & 4 C) K(-60 1, 2, 3deg. & 4 K(-60 1, 2, 3deg. & 4 C) API temperat C) to to Y(+345 C) to to Y(+345 ure Y(+345 deg. C) Y(+345 deg. C) Intergral, blind, target blind & test flanges and studded 6B flanges for 5000 PSI rated working pressure Min. Yield 60 000 PSI 60 000 PSI 75 000 PSI Type 75 000 PSI Table 1.1. Hub and bore dimensions Min. Tensile8 5 000 PSI 85 000 PSI 95 000 PSI 95 000 PSI Materi al API 60K API 60K API 75K API 75K Weld flanges Hub lenght/ Hub neck lenght/ Hub lenght/ Min. Yieldsize 45and 000 PSI 60 000 PSIline-75 000Threaded PSI 75 000 PSI Nominal Threaded pipe casing Hub lenght Welding Neck Line Min. Tensile 7 0 000 PSI 85 000 PSI 95 000flange PSI 95 000 PSI bore of flange(in) flange tubing flange pipe flange Materi al API 45K API 60K L1 API 75K APIL2 75K L3 L4 2 1⁄16 2.56 — 2.56 4.31 2 9⁄16 2.81 — 2.81 4.44 3 1⁄8 3.19 — 3.19 4.94 4 1⁄16 3.88 3.88 3.88 5.19 Type 5 1⁄8 4.44 6B flanges for 5000 4.44PSI rated working —pressure 6.44 and bore dimensions 7 1⁄16 5.06 Table 1.1. Hub 5.06 — 7.13 Nominal Hub Hub 9 6.06lenght/ Hub lenght 6.06 Hub lenght/ Neck — di a/ Tolerance 8.81Maximum size Threaded tubing 6.69 Welding Welding bore of 11 and lenght/ 6.69 — 10.44 bore of Threaded casi ng flange flange Neck Li ne neck li ne welding flange(in) line- pipe Dimension are in inches pipe flange pipe flange neck Notes: flange flange L1 L2 L3 L4 2 1⁄16 2.56 — 2.56 4.31 2 9⁄16 2.81 — 2.81 4.44 3 1⁄8 3.19 — 3.19 4.94 4 1⁄16 3.88 3.88 3.88 5.19 5 1⁄8 4.44 4.44 — 6.44 Nominal and Outside diameter 7 1⁄16 size 5.06 5.06 — 7.13 bore of flange(in) Maximum bore of flange 9 6.06 6.06 — 8.81 B D 11 6.69 6.69 — 10.44 2 1/16 2.09 8.50 2 9⁄16 2.59 9.62 Notes: Dimension are in inches 3 1⁄8 3.22 10.50 4 1⁄16 4.28 12.25

A B 2.38 +0.09/-0.031.72 2.88 +0.09/-0.032.16 3.50 +0.09/-0.032.65 4.50 +0.09/-0.033.47 5.56 +0.09/-0.034.34 Maximum 6.63 +0.016/-0.03 5.22 Tolerance Chamfer +0.016/-0.03 6.84 8.63 D C 8.53 +0.016/-0.03 10.75 ±0.06 0.12 ±0.06 0.12 ±0.06 0.12 ±0.06 0.12

Type 6B flanges f Table 1.2

18.

API 6A Valves & Manifolds

Nominal Maximum Outside Tolerance size and bore di ameter of bore of flange flange(in)

2 1/16 2 9⁄16 3 1⁄8 4 1⁄16 5 1⁄8 7 1⁄16 9 11

B 2.09 2.59 3.22 4.28 5.16 7.16 9.03 11.03

D 8.50 9.62 10.50 12.25 14.75 15.50 19.00 23.00

D ±0.06 ±0.06 ±0.06 ±0.06 ±0.06 ±0.12 ±0.12 ±0.12

Maximum Chamfer

C 0.12 0.12 0.12 0.12 0.12 0.25 0.25 0.25

Notes: Dimension are in inches Nominal Maximum Outside Tolerance Mi ni mum bolt hole tolerance i s -0.02"Maximum size and bore di ameter of Chamfer bore of flange flange(in)

2 1/16 2 9⁄16 3 1⁄8 4 1⁄16 5 1⁄8 Nominal 7 1⁄16 size and 9 bore of 11 flange(in)

B 2.09 2.59 3.22 4.28 5.16 Maximum 7.16 bore 9.03 11.03

D 8.50 9.62 10.50 12.25 14.75 Outside 15.50 di ameter of 19.00 flange 23.00

D ±0.06 ±0.06 ±0.06 ±0.06 ±0.06 Tolerance ±0.12 ±0.12 ±0.12

Dimension are B D in inches D C Mi ni mum bolt hole tolerance i s -0.02"

1 13⁄16 2 1⁄16 2 9⁄16 3 1⁄16 4 1⁄16 5 1⁄8 7 1⁄16 9 11 Nominal size and 1 13⁄16 bore of 2 1⁄16 flange(in) 2 9⁄16

1.84 2.09 2.59 3.09 4.09 5.16 7.09 9.03 11.03 Maximum bore 1.84

3 1⁄16 4 1⁄16 5 1⁄8 1 13⁄16 2 1⁄16 2 9⁄16 3 1⁄16 4 1⁄16 5 1⁄8 7 1⁄16 9 11

2.09 2.59 3.09 B 4.09 5.16 1.84 2.09 2.59 3.09 4.09 5.16 7.09 9.03 11.03

1 13⁄16 2 1⁄16 2 9⁄16 3 1⁄16 4 1⁄16 5 1⁄8

1.84 2.09 2.59 3.09 4.09 5.16

±0.06 ±0.06 ±0.06 ±0.06 ±0.06 ±0.06 ±0.12 ±0.12 ±0.12 Tolerance

10.00 11.31 D 14.19 16.50 7.38 7.88 9.12 10.62 12.44 14.06 18.88 21.75 25.75

±0.06 ±0.06 ±0.06 ±0.06 D ±0.06 ±0.06 ±0.06 ±0.06 ±0.06 ±0.06 ±0.06 ±0.06 ±0.12 ±0.12 ±0.12

8.19 8.75 10.00 11.31 14.19 16.50

±0.06 ±0.06 ±0.06 ±0.06 ±0.06 ±0.06

Type 6B flanges for 5000 PSI rated working pressure Table 1.2 Hub and bore dimensions Di ameter Total Basi c Di ameter Di ameter Number Di ameter Di ameter Bolt hole Lenght Ri ng of Rai sed thi ckness thi ckness of hub of bolt of bolts of bolts of bolt toleranc of stud number, face of flange of flange circle holes e(see bolts R or RX note) F T G A P 4.88 1.81 1.50 4.12 6.50 5.38 1.94 1.62 4.88 7.50 6.62 2.19 1.88 5.25 8.00 7.62 2.44 2.12 6.38 9.50 9.00 3.19 2.88 7.75 11.50 9.75 3.62 3.25 9.00 12.50 12.50 4.06 3.62 11.50 15.50 14.63 4.69 4.25 14.50 19.00 Type 6B flanges for 5000 PSI rated working pressure Table 1.2 Hub and bore dimensions Di ameter Total Basi c Di ameter Di ameter of Rai sed thi ckness thi ckness of hub of bolt face of flange of flange circle

8 8 8 8 8 12 12 12

7⁄8 1 1 1⁄8 1 1/4 1 1/2 1 3⁄8 1 5⁄8 1 7⁄8

1.00 1.12 1.25 1.38 1.62 1.50 1.75 2.00

+.06 +.06 +.06 +.06 +.06 +.06 +.09 +.09

6.00 6.50 7.25 8.00 10.00 10.75 12.00 13.75

24 27 35 39 44 46 50 54

Number Di ameter Di ameter Bolt hole Lenght Ri ng of bolts of bolts of bolt toleranc of stud number, holes e(see bolts R or RX note)

C F T G A P 0.12 4.88 1.81 1.50 4.12 6.50 8 7⁄8 1.00 0.12 5.38 1.94 1.62 4.88 7.50 8 1 1.12 0.12 6.62 2.19 1.88for 10 000 5.25& 15 000 8.00 8 working1 pressure 1⁄8 1.25 Type 6BX Welding neck flanges PSI rated 0.12 7.62 2.44 Table 1. 2.12 9.50 8 1 1/4 1.38 3 Hub and6.38 flange dimensions 0.12 2.88 7.75 11.50 Maximum 9.00 Di ameter 3.19 Total Large Small Lenght of 8 Radius 1 Di1/2 ameter 1.62 number 0.25 9.75 12 1.50 Chamfer of Rai sed 3.62 thi ckness 3.25 di ameter 9.00 di ameter 12.50 hub of hub 1 of3⁄8 bolt of bolts 0.25 12.50 4.06 11.50 15.50 12 1 5⁄8 1.75 face of flange 3.62 of hub of hub circle 0.25 14.63 4.69 4.25 14.50 19.00 12 1 7⁄8 2.00

Notes:

7.38 7.88 9.12 10.62 12.44 14.06 18.88 21.75 25.75 Outside di ameter of 8.19 flange 8.75

E L R P 10 000 PSI 0.12 4.12 1.66 3.50 2.56 1.91 0.38 5.75 8 0.12 4.38 1.73 3.94 2.94 2.03 0.38 6.25 8 0.12 5.19 2.02 4.75 3.62 2.25 0.38 7.25 8 0.12 6.00 2.30 5.59 4.34 2.50 0.38 8.50 8 0.12 7.28 2.77 7.19 5.75 2.88 0.38 10.19 8 0.12 8.69 3.13 8.81 7.19 3.19 0.38 11.81 12 0.25 11.88 4.06 11.88 10.00 3.75 0.62 15.88 12 Type 6BX Welding neck flanges for 10 000 & 15 000 PSI rated working pressure 0.25 14.12 4.88 14.75 12.88 3.69 0.62 18.75 16 Table 1. 3 Hub and flange dimensions 0.25 16.88 5.56 17.75 15.75 4.06 0.62 22.25 16 Maximum Di ameter Total Large 15 000 Small Lenght of Radius Di ameter number PSI Chamfer of Rai sed thi ckness di ameter di ameter hub of hub of bolt of 0.12 4.19 1.78 3.84 2.81 1.88 0.38 6.31 8 bolts of hub face of flange of hub circle 0.12 4.50 2.00 4.38 3.25 2.12 0.38 6.88 8 0.12 5.25 2.25 5.06 3.94 2.25 0.38 7.88 8 0.12 6.06 2.53 6.06 4.81 2.50 0.38 9.06 8 C F7.62 T3.09 A E6.25 L2.88 R P 0.12 7.69 0.38 11.44 8 PSI 0.12 8.88 3.88 9.62 10 000 7.88 3.22 0.62 13.50 12 0.12 4.12 1.66 3.50 2.56 1.91 0.38 5.75 8 0.12 4.38 1.73 3.94 2.94 2.03 0.38 6.25 8 0.12 5.19 2.02 4.75 3.62 2.25 0.38 7.25 8 0.12 6.00 2.30 5.59 4.34 2.50 0.38 8.50 8 0.12 7.28 2.77 7.19 5.75 2.88 0.38 10.19 8 0.12 8.69 3.13 8.81 7.19 3.19 0.38 11.81 12 0.25 11.88 4.06 11.88 10.00 3.75 0.62 15.88 12 0.25 14.12 4.88 14.75 12.88 3.69 0.62 18.75 16 0.25 16.88 5.56 17.75 15.75 4.06 0.62 22.25 16 15 000 PSI 0.12 4.19 1.78 3.84 2.81 1.88 0.38 6.31 8 0.12 4.50 2.00 4.38 3.25 2.12 0.38 6.88 8 0.12 5.25 2.25 5.06 3.94 2.25 0.38 7.88 8 0.12 6.06 2.53 6.06 4.81 2.50 0.38 9.06 8 0.12 7.62 3.09 7.69 6.25 2.88 0.38 11.44 8 0.12 8.88 3.88 9.62 7.88 3.22 0.62 13.50 12

+.06 +.06 +.06 +.06 +.06 Di amete +.06 r of bolts +.09 +.09

6.00 6.50 7.25 8.00 10.00 Di amet 10.75 er of 12.00 bolt 13.75 holes

24 27 35 39 44 Bolt Lenght of Ri ng 46 hole stud number, 50 toleranc bolts R or RX 54 e(see note)

3/4 3/4 7⁄8 1 1 1⁄8 1 1⁄8 1 1/2 1 1/2 1 3/4 Di amete r7⁄8 of bolts

.88 .88 1.00 1.12 1.25 1.25 1.62 1.62 1.88 Di amet er of 1.00 bolt 1.00 holes 1.12

+.06 +.06 +.06 +.06 +.06 +.06 +.09 +.09 +.09 Bolt hole +.06 toleranc +.06 e(see +.06 note) +.06

5.00 5.25 6.00 6.75 8.00 8.75 11.25 13.00 15.00 Lenght of stud 5.50 bolts 6.00

+.06 +.09 +.06 +.06 +.06 +.06 +.06 +.06 +.09 +.09 +.09

6.75 7.50 9.25 11.50 5.00 5.25 6.00 6.75 8.00 8.75 11.25 13.00 15.00

151 152 153 154 155 169 156 157 158 Ri ng number, 151 R or RX 152

+.06 +.06 +.06 +.06 +.06 +.09

5.50 6.00 6.75 7.50 9.25 11.50

151 152 153 154 155 169

7⁄8 1 1 1⁄8 1 3⁄8 1 1/2 3/4 3/4 7⁄8 1 1 1⁄8 1 1⁄8 1 1/2 1 1/2 1 3/4

7⁄8 7⁄8 1 1 1⁄8 1 3⁄8 1 1/2

1.25 1.50 1.62 .88 .88 1.00 1.12 1.25 1.25 1.62 1.62 1.88

1.00 1.00 1.12 1.25 1.50 1.62

153 154 155 169 151 152 153 154 155 169 156 157 158

18.

API 6A Valves & Manifolds

Table 1.4 studded crosses Nominal size and bore Centre to Working Vertical B1 Vertical B2 face. pressure (Inches)+ (Inches)+ (Inches)+ .03,-0 .03,-0 .03,-0 2 1⁄16 2 1⁄16 4.50 2 9⁄16 2 1⁄16 4.50 2 9⁄16 2 9⁄16 5.00 3 1⁄8 2 1⁄16 4.50 3 1⁄8 2 9⁄16 5.50 5000 3 1⁄8 3 1⁄8 5.50 4 1⁄16 2 1⁄16 4.50 4 1⁄16 2 9⁄16 5.00 4 1⁄16 3 1⁄8 5.50 4 1⁄16 4 1⁄16 6.50 1 13⁄16 1 13⁄16 4.38 2 1⁄16 1 13⁄16 4.38 2 1⁄16 2 1⁄16 4.38 2 9⁄16 1 13⁄16 4.50 2 9⁄16 2 1⁄16 4.50 2 9⁄16 2 9⁄16 5.12 3 1⁄16 1 13⁄16 4.50 10 000 3 1⁄16 2 1⁄16 4.50 3 1⁄16 2 9⁄16 5.12 3 1⁄16 3 1⁄16 5.88 4 1⁄16 1 13⁄16 4.50 4 1⁄16 2 9⁄16 4.50 4 1⁄16 2 9⁄16 5.12 4 1⁄16 3 1⁄16 5.88 4 1⁄16 4 1⁄16 6.88 1 13⁄16 1 13⁄16 5.00 2 1⁄16 1 13⁄16 5.00 2 1⁄16 2 1⁄16 5.00 2 9⁄16 1 13⁄16 5.50 2 9⁄16 2 1⁄16 5.50 2 9⁄16 2 9⁄16 5.50 3 1⁄16 1 13⁄16 6.31 15 000 3 1⁄16 2 1⁄16 6.31 3 1⁄16 2 9⁄16 6.31 3 1⁄16 3 1⁄16 6.31 4 1⁄16 1 13⁄16 7.62 4 1⁄16 2 1⁄16 7.62 4 1⁄16 2 9⁄16 7.62 4 1⁄16 3 1⁄16 7.62 4 1⁄16 4 1⁄16 7.62

Centre to face. (Inches)+ .03,-0 4.50 5.00 5.00 5.50 5.50 5.50 6.50 6.50 6.50 6.50 4.38 4.38 4.38 5.12 5.12 5.12 5.88 5.88 5.88 5.88 6.88 6.88 6.88 6.88 6.88 5.00 5.00 5.00 5.50 5.50 5.50 6.31 6.31 6.31 6.31 7.62 7.62 7.62 7.62 7.62

18.

API 6A Valves & Manifolds

Section 2. Hammer Lug Unions Hammer Lug Unions are designed and manufactured in accordance with the following specifications:API 6A

Specification for Wellhead and Christmas Tree Equipment.

API RP-14E

Recommended Practice for Design and Installation of Offshore Production

Platform Piping

NACE MR-01-75

Sulphide Stress Cracking Resistant Metallic Materials for Oilfield Equipment.

ASME VIII

Boiler and Pressure Vessel Code.

ANSI B31.3

Chemical Plant and Petroleum Refinery Piping.

Hammer Lug Unions are available in a range of figure numbers for use with the following pressure ratings and services:-

to 4” – 7,500 psi cwp (483 bar) 5” and 6”

18.

ut –

API 6A Valves & Manifolds

1 102401 32,00

Fig 1002 Hammer Lug Union

2 102402 32,00

– 10,000 psi cwp (690 bar) 1” to 4” – 7,500 psi cwp (483 bar) 5” and 6”

3 102403 13,00

4 102404 10,00

5 102405 0,22

HUBWSG-1XX2 Butt Weld Sour Gas - XXS – Sour Gas Green –1" – 4" = 7,500 psi cwp, 5" & 6" = 5,000 psi cwp

SGBL102303 7,00

SGBL102403 Size 10,00

Union Complete SGBL102304 SGBL102404 Part No. 8,00 11,00 Weight (lb) Nut Part No. Weight (lb) Male Sub Part No. Weight (lb) Female Sub Part No. Weight (lb) Seal Ring Part No. Weight (lb)

SGBL102503 30,00

SGBL102603 1" 40,00

SGBL102504 SGBL102604 SGBW102101XXS 30,00 35,00

5,00

SGBW102301XXS 22,00

SGBW102401XXS 33,00

SGBW102501XXS 57,00

SGBW102601XXS 81,00

SG102102 2,00

SG102302 10,00

SG102402 13,00

SG102502 26,00

SG102602 37,00

SGBW102103XXS 1,00

SGBW102303XXS 6,00

SGBW102403XXS 10,00

SGBW102503XXS 15,00

SGBW102603XXS 20,00

SGBW102104XXS 1,00

SGBW102304XXS 7,00

SGBW102404XXS 10,00

SGBW102504XXS 16,00

SGBW102604XXS 23,00

152106 0,02

152306 0,16

152406 0,22

152506 0,15

152606 0,15

HUBW 1XX2 Butt Weld - XXS – Red Nut – 1" to 4" = 10,000 psi cwp, 5" & 6" = 7,500 psi cwp Mento Size Hoses and Couplings Catalogue 1"

Union Complete Part No. Weight (lb) Nut Part No. Weight (lb) Male Sub Part No. Weight (lb) Female Sub Part No. Weight (lb) Seal Ring Part No. Weight (lb)

BW102101XXS 5,00

287

BW102301XXS 22,00

BW102401XXS 33,00

BW102501XXS 57,00

BW102601XXS 81,00

See threaded Fig. 1002 for nut part numbers and weights.

SG102502 26,00

SG102602 37,00

BW102103XXS 1,00

BW102303XXS 6,00

BW102403XXS 10,00

BW102503XXS 15,00

BW102603XXS 20,00

BW102104XXS 1,00

BW102304XXS 7,00

BW102404XXS 10,00

BW102504XXS 16,00

BW102604XXS 23,00

152105 0,02

152305 0,16

152405 0,22

207405 0,15

152605 0,15

18.

API 6A Valves & Manifolds

Fig 1502 Hammer Lug Union – 15,000 psi cwp (1034 bar)

tt Weld it

all thick-

e factory. weight

HUBWSG-15XX2 Butt Weld Sour Gas XXS Sour Gas Green 10,000 psi cwp HUTE - SG1502

Size 1" 2" 3" Threaded Ends Sour Gas Green 10,000 psi cwp Part No. SGBW152101XXS SGBW152201XXS SGBW152301XXS Union Complete Size 2" (lb) 3" Weight 9,50 13,00 Union Complete Part No. Nut See Threaded Fig. 1502 for nut part numbers and Weights. Part No. SG152201 SG152301 Weight (lb) Weight (lb) 19,00 30,00 Part No. SGBW152103XXS SGBW152203XXS SGBW152303XXS Male Sub Weight (lb) 0,80 2,50 3,30 Nut Part No. SGBW152104XXS SGBW152204XXS SGBW152304XXS Part No. SG152202 SG152302 Female Sub Weight (lb) 1,00 2,50 3,20 Weight (lb) 9,00 12,00 Part No. 152106 152206 152306 Seal RingMale Sub Weight (lb) 0,02 0,10 0,16 Part NO. SG152203 SG152303 (lb) Butt Weld 5,00 9,00 psi cwp HUBWWeight - 15XX2 XXS Blue Nut 15,000

Female Sub Part No. Union Complete Weight (lb) Nut

Seal Ring Part No. Male SubWeight (lb) Female Sub Seal Ring

Size Part No. SG152204 Weight (lb) 5,00 Part No. Weight (lb) 152206 Part No. 0,10 Weight (lb) Part No. Weight (lb) Part No. Weight (lb)

1" BW152101XXS SG152304 8,00 9,00

2" BW152201XXS 22,00

See threaded Fig. 1502 for nut part numbers 152306 BW152103XXS BW152203XXS 0,16 2,00 7,00 BW152104XXS BW152204XXS 2,00 6,00 152105 152205 0,02 0,10

Mento Hoses and Couplings Catalogue

291

3" BW152301XXS 29,00

BW152303XXS 9,00 BW152304XXS 8,00 152305 0,16

4" SGBW152401XXS 34,00 SG152402 17,00 SGBW152403XXS 9,20 SGBW152404XXS 7,80 152406 0,22

4" BW152401XXS 75,00 152402 36,00 BW152403XXS 21,00 BW152404XXS 17,00 152405 0,25

36,00

3XXS psi

18.

API 6A Valves & Manifolds

BW152403XXS cwp (1034 bar) 21,00

Union is ruggedly 4XXS tured BW152404XXS to the 17,00 to ensure safety ip type elastomer 152405 anti-extrusion 0,25 d. All H2S Service nson are mination to bar) ents of N.A.C.E. duct is fit for dly

Fig 2202 Hammer Lug Union – 15,000 psi cwp (1034 bar)

ty mer

The Figure 2202 Sour Gas Union is ruggedly proportioned and manufactured to the highest quality standards to ensure safety and reliability in service. Lip type elastomer seals with stainless steel anti-extrusion rings are fitted as standard. All H2S Service Unions manufactured by Anson are subjected to vigorous examination to ensure the latest requirements of N.A.C.E. are adhered to and the product is fit for purpose.

ice

.D.

E. 1.25”

2.06” 3.00” 4.00” 5.00”

fering O.D.

2.1/2” and ase do not

Size Inch 2” 3” * 4” * 5” 6”

Butt Weld (Thread not available) Weight Nut Total lbs Radius A Length B 23.0 3.75” 7.40” 48.0 4.88” 9.56” 76.0 6.00” 8.50” 110.0 6.50” 10.75” 170.0 7.25” 13.00”

Weld Prep O.D.

I.D.

2.50” 4.125” 5.50” 6.12” 7.25”

1.25” 2.06” 3.00” 4.00” 5.00”

Note: Weight indicated is for the weld prep shown. Differing O.D. and I.D. prepes can be supplied upon request. Anson* 3” and 4” unions are sometimes referred to as 2.1/2” and 3” respectively by other manufacturers. If in doubt please do not hesitate to ask.

HUBW - 2202

Butt Weld Sour Gas Sour Gas Green Nut 15,000 psi cwp (1034 bar) Mento Hoses and Couplings Catalogue Size 2" (1.25" I.D.) 293 3" (2.1/16" I.D.) Part No. SGBW222201 SGBW222301 Union Complete Weight (lb) 23,10 47,74 Part No. SG222202 SG222302 Nut Weight (lb) 12,32 19,80 Part No. SGBW222203 SGBW222303 Male Sub Weight (lb) 4,40 15,84 Part No. SGBW222204 SGBW222304 Female Sub Weight (lb) 5,50 11,44 Part No. 222206 222306 Seal Ring Mento Hoses and Couplings Catalogue Weight (lb)293 0,10 0,12 Part No. 222207 222307 Segment (Set 3) Weight (lb) 0,90 1,30 Part No. 222208 222308 Ret Ring Weight (lb) 0,01 0,01

HUBW - 2202 4" (3" I.D.) SGBW222401 75,90 SG222402 37,40 SGBW222403 20,90 SGBW222404 17,60 222406 0,17 222407 2,60 222408 0,02

Blind Subs – Sour Gas Green – 15,000 psi cwp 2" 3" 4"

SGBL222203 6,00 SGBL222204 7,00

SGBL222303 21,00 SGBL222304 15,00

SGBL21689 30,00 SGBL16679 27,00

18.

API 6A Valves & Manifolds

Section 3. Long Sweep, 3D Double Back Reinforced & Full Flow Forged Long Sweep Manifold Fittings are designed and manufactured in accordance with the following specifications:MSS-SP-75

Specifications for High Test Wrought Butt Weld Fittings.

ANSI B31.3

Chemical Plant and Petroleum Refinery Piping.

ASME B16.9

Factory-Made Wrought Steel Buttwelding Fittings.

ASME VIII

Boiler and Pressure Vessel Code.

API 6A

Specification for Wellhead and Christmas Tree Equipment.

NACE MR-01-75

Sulphide Stress Cracking Resistant Metallic Materials for Oilfield Equipment.

Manifold Fittings are available either Full Flow or with reducing configuration in all pipe wall schedules, for the following pressure ratings:-

18.

API 6A Valves & Manifolds

samt innledende tekst som på Word formatet Max samt innledende tekst som på Word formatet worki ng 5 000 PSI7 500 PSI 10 00015 PSI000 PSI Max working Test pressure 7 500 15 PSI000-60 22 PSI500 PSI Operat -60 TOPSI11 -60250 -60 pressure 5 000 PSI 7 500 PSI ing +345 TO TO TO Test pressure 7 500 PSI 11 250 PSI temp. deg. C +345 +345 +345 Operating -60 TO +345 -60 TO +345 Min. Yield 52 000 PSI >80,000 >80,000 PSI >80,000 PSI PSI temp. range deg. C deg. C Min. Tensile 66 000 PSI 105 000 105 PSI 000 105 PSI 000 PSI MSS-SP- ASTM ASTM ASTM Min. Yield 52 000 PSI >80,000 PSI 75 Gr A234 A234 A234 Min. Tensile 66 000 PSI 105 000 PSI MaterialWPHY Gr Gr Gr MSS-SP-75 Gr ASTM A234 Gr Material WPHY 52 4130

10 000 PSI 15 000 PSI -60 TO +345 deg. C >80,000 PSI 105 000 PSI ASTM A234 Gr 4131

Table 3.1 full flow cross All dimensions in mm Weight Size Table 3.1 full flow cross D A B R approx(kg) All dimensions in mm 2˝ Size 60.3 406 203 150 32 D A B 3˝ 88.9 406 203 150 48 2˝ 60.3 406 203 4˝ 114.3 560 280 210 94 3˝ 88.9 406 203 5˝ 141.3 610 305 240 138 4˝ 114.3 560 280 6˝ 168.3 762 381 305 208 5˝ 141.3 610 305 6˝ 168.3 762 381

Table 3.2 full tee All dimensions in mm Weight Size Table 3.2 full tee approx(kg) D A B R All dimensions in mm 2˝ Size 60.3 406 203 150 39 D A B 3˝ 88.9 406 203 150 33 2˝ 60.3 406 203 4˝ 114.3 560 280 210 64 3˝ 88.9 406 203 5˝ 141.3 610 305 240 90 4˝ 114.3 560 280 6˝ 168.3 762 381 305 143 5˝ 141.3 610 305 6˝ 168.3 762 381

Table 3.3 long sweep tee All dimensions in mm Weight Size Table 3.3 long sweep tee approx(kg) D A B R All dimensions in mm 2˝ Size 60.3 330 203 150 34 D A B 3˝ 88.9 330 203 150 28 2˝ 60.3 330 203 4˝ 114.3 406 280 210 51 3˝ 88.9 330 203 5˝ 141.3 483 305 240 76 4˝ 114.3 406 280 6˝ 168.3 686 381 305 132 5˝ 141.3 483 305 6˝ 168.3 686 381

15 000 PSI 22 500 PSI -60 TO +345 deg. C >80,000 PSI 105 000 PSI ASTM A234 Gr 4132

R 150 150 210 240 305

Weight approx(kg) 32 48 94 138 208

R 150 150 210 240 305

Weight approx(kg) 39 33 64 90 143

R 150 150 210 240 305

Weight approx(kg) 34 28 51 76 132

18.

Size 2˝ 3˝ 4˝ 5˝ 6˝

API 6A Valves & Manifolds

Table 3.4 45º Lateral Tee All dimensions in mm D A B R 60.3 365 115 265 88.9 365 115 265 114.3 510 155 365 141.3 550 165 405 168.3 670 195 505

Weight approx(kg) 39 32 65 90 141

Table 3.5 Long sweep tee c/w integral bull plug All dimensions in mm Weight Size approx(kg) D A B R 2˝ 60.3 406 203 150 34 3˝ 88.9 406 203 150 28 4˝ 114.3 560 280 210 51 5˝ 141.3 610 305 240 76 6˝ 168.3 762 381 305 132

Table 3.6 90º Long Sweep Elbow All dimensions in mm Weight Size approx(kg) D A R C 2˝ 60.3 203 150 53 14 3˝ 88.9 203 150 53 20 4˝ 114.3 280 210 70 39 5˝ 141.3 305 240 65 57 6˝ 168.3 381 305 76 105

Table 3.7 45º Long Sweep Elbow All dimensions in mm Weight Size approx(kg) D A R C 2˝ 60.3 118 150 56 9 3˝ 88.9 118 150 56 14 4˝ 114.3 162 210 75 26 5˝ 141.3 171 240 72 37 6˝ 168.3 203 305 25 57

18.

API 6A Valves & Manifolds

Table 3.8 90º 3d Double Backed Bend All dimensions in mm Weight Size D A R C approx(kg) 2˝ 60.3 178 152 26 8 3˝ 88.9 305 229 76 29 4˝ 114.3 356 305 51 52 5˝ 141.3 432 381 51 87 6˝ 168.3 533 457 76 177 Table 3.9 45º 3d Double Backed Bend All dimensions in mm Weight Size approx(kg) D B R C 2˝ 60.3 121 152 58 7 3˝ 88.9 171 229 76 19 4˝ 114.3 177 305 51 31 5˝ 141.3 209 381 51 50 6˝ 168.3 265 457 76 89

Size 2˝ 3˝ 4˝ 5˝ 6˝

Table 3.10 Bull Plug All dimensions in mm D A B 60.3 70 48 88.9 90 60 114.3 115 81 141.3 140 102 168.3 170 126

Weig ht 1 3 6 10 18

Table 3.11 Standpipe Goosneck 160 deg c/w All dimensions in mm Weight Size approx(kg) D A B R 2˝ 60.3 330 310 150 47 3˝ 88.9 330 310 150 48 4˝ 114.3 406 431 210 91 5˝ 141.3 483 487 240 133 6˝ 168.3 686 600 305 238

Table 3.12 Standpipe Goosneck 160 deg c/w All dimensions in mm Weight Size approx(kg) D A B R 2˝ 60.3 406 310 150 48 3˝ 88.9 406 310 150 51 4˝ 114.3 560 431 210 97 5˝ 141.3 610 487 240 142 6˝ 168.3 762 600 305 255

18.

API 6A Valves & Manifolds

Section 4. API Hubs and Clamps Hubs and Clamps are designed and manufactured in accordance with the following specifications:API 16A

Specification for Drill Through Equipment.

API 6A

Specification for Wellhead and Christmas Tree Equipment.

NACE MR-01-75

Sulphide Stress Cracking Resistant Metallic Materials for Oilfield Equipment.

ASME VIII

Boiler and Pressure Vessel Code.

ANSI B31.3

Chemical Plant and Petroleum Piping.

Hubs are available as Weld Neck, Integral & Blinds and are available in the following materials and pressure ratings:samt innledende tekst som på Word formatet Max Working pressure 5 000 PSI Test pressure 7 500 PSI

10 000 PSI 15 000 PSI

15 000 PSI 22 500 PSI

Product specification levels 1, 2, 3 & 4 K(-60 deg. C) to API temperature rating Y(+345 deg. C) Min. Yield 60 000 PSI Min. Tensile 85 000 PSI Material 60K General notes: Dimensions areAPI in inches

1, 2, 3 & 4 K(-60 deg. C) to Y(+345 deg. C) 60 000 PSI 85 000 PSI API 60K

1, 2, 3 & 4 K(-60 deg. C) to Y(+345 deg. C) 75 000 PSI 95 000 PSI API 75K

Dimension E Counterbore optional General notes: Dimensionsisare in inches Dimension E Counterbore is optional

Table 4.1 API Type 16BX Integral Hub Connections for 5,000 psi Rated Working Pressure Table 4.2 Clamps 16B API for API Type Working Large diameter of designate pressure( Table 4.2 Clamps 16B API for API Type Working Nominal size and bore PSI) Outside diameter Total thickness neck Clamp number d size designate pressure( B 1 13/16 D C A Clamp1 numberd size PSI)10 000 5 000 PSI 2 1/16 5 000 000 1 13/16 10 2 1⁄161 5.031 1.166 3.656 1 15 2 13/16 1/16 5 000 000 2 9⁄162 5.781 1.166 4.406 2 1/16 10 1 13/16 15 000 000 3 1⁄8 6.312 1.166 4.938 2 9/16 5 000 000 2 2 1/16 10 4 1⁄16 7.625 1.197 6.250 1 20 2 13/16 9/16 5 000 000 7 1⁄16 13.250 1.622 11.625 2 1/16 15 1 13/16 20 000 000 3 9 13.250 1.622 11.625 2 1/16 20 2 1/16 15 000 000 11 3 16.250 1.654 14.625 2 9/16 15 2 1/16 20 000 000 10 000 PSI 2 9/16 10 2 9/16 15 000 000 4 1 13⁄16 5.031 1.166 3.656 1/8 5 000 000 2 39/16 10 2 1⁄164 5.781 1.166 4.406 3 31/16 10 1/8 5 000 000 2 9⁄165 6.312 1.166 4.938 4 1/16 5 000 000 3 1/16 10 3 1⁄165 7.625 1.197 6.250 2 9/16 20 4 1/16 5 000 000 4 1⁄166 8.437 1.310 6.812 3 1/16 15 2 9/16 20 000 000 7 1⁄16 16.250 1.653 14.625 4 1/16 10 6 3 1/16 15 000 000 9 16.250 1.653 14.625 3 1/16 20 4 1/16 10 000 000 11 20.625 2.035 18.625 4 1/16 15 3 1/16 20 000 000 8 15 000 PSI 7 1/16 5 000 000 4 1/16 15 8 1 13⁄16 5.781 1.166 4.406 9 5 000 000 7 1/16 5 2 1⁄16 6.125 1.622 4.500 9 5 000 2 9⁄16 6.125 1.622 4.500

18.

API 6A Valves & Manifolds

samt innledende tekst som på Word formatet Max Working 5 000 PSI 10 000 PSI 15 000 PSI Test pressure 7 500 PSI 15 000 PSI 22 500 PSI Product specificatio n l evel s 1, 2, 3deg. & 4 K(-60 1, 2, 3deg. & 4 1, 2, 3 & 4 API K(-60 temperature C) to C) to K(-60 deg. C) to rating Y(+345 Y(+345 Y(+345 deg. C) Min. Yield 60 000 PSI 60 000 PSI 75 000 PSI Min. Tensile 85 000 PSI 85 000 PSI 95 000 PSI Material API 60K API 60K API 75K

20 000 PSI 30 000 PSI 1, 2, 3 & 4 K(-60 deg. C) to Y(+345 deg. C) 75 000 PSI 95 000 PSI API 75K

Table 4.1 API Type 16BX Integral Hub Connections for 5,000 psi Rated Working Pressure Normal size Outside Total Large diameter Neck l enght for Ring gasket Clamp and bore diameter thickness of neck cl amp cl earance number number B D C A L 5 000 PSI 2 1⁄16 5.031 1.166 3.656 2.22 BX-152 1 2 9⁄16 5.781 1.166 4.406 2.27 BX-153 2 3 1⁄8 6.312 1.166 4.938 2.36 BX-154 4 4 1⁄16 7.625 1.197 6.250 2.38 BX-155 5 7 1⁄16 13.250 1.622 11.625 3.38 BX-156 6 9 13.250 1.622 11.625 3.38 BX-157 8 11 16.250 1.654 14.625 4.13 BX-158 10 10 000 PSI 1 13⁄16 5.031 1.166 3.656 2.22 BX-151 1 2 1⁄16 5.781 1.166 4.406 2.27 BX-152 2 2 9⁄16 6.312 1.166 4.938 2.36 BX-153 4 3 1⁄16 7.625 1.197 6.250 2.38 BX-154 5 4 1⁄16 8.437 1.310 6.812 2.82 BX-155 6 7 1⁄16 16.250 1.653 14.625 4.13 BX-156 10 9 16.250 1.653 14.625 4.13 BX-157 10 11 20.625 2.035 18.625 4.75 BX-158 22 15 000 PSI 1 13⁄16 5.781 1.166 4.406 2.27 BX-151 2 2 1⁄16 6.125 1.622 4.500 3.22 BX-152 3 2 9⁄16 6.125 1.622 4.500 3.22 BX-153 3 3 1⁄16 8.437 1.310 6.812 2.82 BX-154 6 4 1⁄16 13.250 1.622 11.625 3.38 BX-155 8 7 1⁄16 20.626 2.035 18.625 4.75 BX-156 22 11 22.250 2.309 20.625 5.31 BX-158 15 20 000 PSI 1 13⁄16 6.125 1.622 4.500 3.22 BX-151 3 2 1⁄16 6.125 1.622 4.500 3.22 BX-152 3 2 9⁄16 8.437 1.310 6.812 2.82 BX-153 6 3 1⁄16 13.250 1.622 11.625 3.38 BX-154 8 4 1⁄16 16.250 1.653 14.625 4.13 BX-155 10 7 1⁄16 22.250 2.308 20.625 5.31 BX-156 15 11 27.997 3.005 25.000 6.17 BX-158 28

19.

Ring Gaskets

Differences between Ring Type Joint Gaskets

RTJ gaskets are precision machined from solid metal and are designed for high pressure and high temperature services. They seal by creating very high unit load, achined ed nd solid from aremetal designed from solid and metal solid are formetal designed high and are pressure and designed for arecontact high designed andpressure for high high forpressure high and high pressure andmating high and high metal-to-metal line with special flangby unit ng seal creating very load, by es. high creating metal-to-metal very unit high very load, unit high metal-to-metal load, line unit contact load, metal-to-metal metal-to-metal with line contact line with contact line contact with with Metals are typically chosen so that thering gasket that ely alstypically chosen are thering typically so chosen gasket thatchosen thering so is that softer sogasket thering that than thering isthe gasket softer flange gasket is than softer the is softer than flange the thanflange the flange is softer than the flange material in order to prevent he tdage damage thereby flanges to theto causing and flanges thethereby flanges plastic and thereby causing and flowthereby ofplastic causing the causing flow plastic ofplastic the flow of flow theof the damage to flanges and thereby causing plastic or .design f The the cross gasket design of section theor ofgasket cross the is chosen gasket section orthe cross based or iscross section chosen onsection the isbased chosen existing is chosen onbased the existing based on theonexisting the existing flow of the gasket into the flange faces. The design d ressure. signed um maximum system maximum Gasket pressure. system and system pressure. flange Gasket pressure. surface and Gasket flange finishes Gasket andsurface flange and andflange finishes surface surface and finishes finishes and and tardness gasket with be carefully gasket hardness hardness controlled be must carefully must beor incarefully controlled order be carefully tosection controlled obtain in order controlled tochosen order obtain in order to based obtain to obtain ofmust the gasket cross isin on the eal. existing flange configuration and designed maximum system pressure. Gasket and flange surface finishes and dimensional accuracy along with gasket hardness must be carefully controlled in order to obtain and maintain an effective seal.

een ng between tween Type RingRing Joint Type Ring Type Gaskets Joint Type Joint Gaskets Joint Gaskets Gaskets

nal -sections tagonal cross-sections cross-sections Style R dern geable e on modern on modern • Available in oval and octagonal cross-sections es ed rooved flanges flanges kets manufactured d R in gaskets are • manufactured are manufactured in in in R gaskets are interchangeable on modern octagonal 20 PI ations B16.20 6A andspecifications API and 6A API specifications 6A specifications flat bottom grooved flanges Style ROval Style R- Octagonal Style Octagonal Style R- Oval Style R- Oval Style ROval Style ROctagonal Style R- Oval Style RR- Octagonal Style R- Octagonal

• Standard sizes of Style R gaskets are manufactured in accordance with ASME B16.20 and API 6A specifications

Style RX • Style RX ring joint has a unique self-sealing action. The outside bevels of the ring make the initial contact ue The self-sealing outside bevels action. outside bevels unique self-sealing action. The outside bevels ealing action. The outside providing a The sealbevels against the groove’s outer surfaces. ontact l against providing groove’s a sealathe outer against the groove’s outerouter tial contact providing seal against the groove’s oviding athe seal against groove’s outer As the internal pressure increases, so does the gasket ssure es theincreases, gasket loading so does stress the gasket loading stressstress l pressure increases, so does the gasket loading reases, so does the gasket loading stress loading stress against the groove thus improving the oving characteristics the sealing gaskets sealing characteristics improving the gaskets sealing characteristics eling gaskets characteristics sealing characteristics RX resistant gasket make to shock it more load, resistant to shock load, load, test test Style RXitgaskets gasket make it more resistant to shock temake more resistant totest shock load, test bration ling vibration • Design features of the Style RX gasket make it more eerchangeable etely withinterchangeable standard Style Rshock with groove standard Style pressure R groove completely interchangeable with standard Style R groove with standard Style R groove resistant to load, test shock and drilling nnterchanging these whenstyles interchanging as RX gaskets these are styles as RX as gaskets are are taken when interchanging these styles RX gaskets these styles as RX gaskets are vibration he assembly hedtofinished the finished assembly assembly • Style RX ring joints are completely interchangeable Style Style RX RX Style RX Style Style RX RX with standard Style R groove designs. Care should be taken when interchanging these styles as RX gaskets are taller and will add length to the finished assembly

Style BX • Style BX gaskets have a pitch diameter slightly er than the slightly groove larger than the rdiameter slightly larger than the groove pitch diameter slightly larger thangroove the groove larger than the groove pitch diameter. This allows for or made initial contact the outside to be made ofthe theoutside on ring, theon outside of theofring, contact to be made onto of theoutside ring, ows foron initial contact be made the the ring, initial contact to be made on the outside of the ring, nergized aseal pressure energized seal seal acreates pressure energized sealenergized which creates a pressure pre-loading the gasket which creates a pressure enerate essure toaenable pressure trapped passage totrapped enable trapped passage to enable orporate a pressure passage to enable trapped heinjoint elf thegized joint seal nPIused only BX be with API not flanges and are with API BXare flanges and not ets canflanges only beand used with BXare flanges andnot are nota pressure passage • used All Style BXBXAPI gaskets incorporate X RX to enable trapped pressure to balance itself in the joint tyle • Style BX ring joint gaskets can only be used with API BX flanges and are not interchangeable with Style RX

Style BX

20.

Chart Gasket & Studs

Chart below showing ring gasket sizes & stud sizes for API 6A flanges Chart below showing ring gasket sizes & stud sizes for API 6A flanges

API Flanges 5 000 PSI WP(6B)

10 000 PSI WP(6BX)

15 000 PSI WP(6BX)

Flange size 2 1/16" 2 9/16" 3 1/16" 4 1/16" 1 13/16" 2 1/16" 2 9/16" 3 1/16" 4 1/16" 7 1/16" 1 13/16" 1 1/16" 2 9/16" 3 1/16" 4 1/16" 7 1/16"

API ring No NO R24/ RX24 R27/ RX27 R35/ RX35 R39/ RX39 BX-151 BX-152 BX-153 BX-154 BX-155 BX-156 BX-151 BX-152 BX-153 BX-154 BX-155 BX-156

Studs with nuts Size Appr. Weight pr. set(lbs) 8 7/8 x 6 12 8 1 x 6 1/2 17 8 1 1/8 x 7 1/4 24 8 1 1/4 x 8 35 8 3/4 x 5 8 8 3/4 x 5 1/4 8 8 7/8 x 6 11 8 1 x 6 3/4 17 8 1 1/8 x 8 26 12 1 1/2 x 11 1/4 95 8 7/8 x 5 1/2 9 8 7/8 x 6 11 8 1 x 6 3/4 16 8 1 1/8 x 7 1/2 24 8 1 3/8 x 9 1/4 29 16 1 1/2 x 12 3/4 112

21.

P/N Gasket & Studs

Chart below showing part nr. on ring gasket sizes & stud sizes for API 6A flanges Part Nr L7G7SB2XN1"X165 L7G7SB2XN1"X170 L7G7SB2XN1"X180 L7G7SB2XN11/2"X260 L7G7SB2XN11/2"X295 L7G7SB2XN11/2"X300 L7G7SB2XN11/4"X210 L7G7SB2XN11/8"X200 L7G7SB2XN11/8"X210 L7G7SB2XN11/8"X220 L7G7SB2XN11/8"X240 L7G7SB2XN13/8"X240 L7G7SB2XN3/4"X130 L7G7SB2XN3/4"X140 L7G7SB2XN7/8"X140 L7G7SB2XN7/8"X155

Part Nr R150BX6 R150BXD R151BX6 R151BXD R152BX6 R152BXD R153BX6 R153BXD R154BX6 R154BXD R155BX6 R155BXD R156BX6 R156BXD R157BX6 R157BXD R159BX6 R159BXD R160BX6 R160BXD R163BX6 R163BXD R164BX6 R164BXD

Description STUDBOLT 1" UNC X 165MM C/W 2 NUTS, HOT DIP GALV ASTM A320 L7/A194 GR.7 STUDBOLT 1" UNC X 170MM C/W 2 NUTS, HOT DIP GALV ASTM A320 L7/A194 GR.7 STUDBOLT 1" UNC X 180MM C/W 2 NUTS, HOT DIP GALV ASTM A320 L7/A194 GR.7 STUDBOLT 1.1/2" UN X 260 MM C/W 2 NUTS, HOT DIP GALV ASTM A320 L7/A194 GR.7 STUDBOLT 1.1/2" UN X 295 MM C/W 2 NUTS, HOT DIP GALV ASTM A320 L7/A194 GR.7 STUDBOLT 1.1/2" UN X 300 MM C/W 2 NUTS, HOT DIP GALV ASTM A320 L7/A194 GR.7 STUDBOLT 1.1/4" UNC X 210 MM C/W 2 NUTS, HOT DIP GALV ASTM A320 L7/A194 GR.7 STUDBOLT 1.1/8" 8UN X 200 MM C/W 2 NUTS, HOT DIP GALV ASTM A320 L7/A194 GR.7 STUDBOLT 1.1/8" 8UN X 210 MM C/W 2 NUTS, HOT DIP GALV ASTM A320 L7/A194 GR.7 STUDBOLT 1.1/8" 8UN X 220 MM C/W 2 NUTS, HOT DIP GALV ASTM A320 L7/A194 GR.7 STUDBOLT 1.1/8" 8UN X 240 MM C/W 2 NUTS, HOT DIP GALV ASTM A320 L7/A194 GR.7 STUDBOLT 1.3/8" UNC X 240 MM C/W 2 NUTS, HOT DIP GALV ASTM A320 L7/A194 GR.7 STUDBOLT 3/4" UNC X 130 MM C/W 2 NUTS, HOT DIP GALV ASTM A320 L7/A194 GR.7 STUDBOLT 3/4" UNC X 140 MM C/W 2 NUTS, HOT DIP GALV ASTM A320 L7/A194 GR.7 STUDBOLT 7/8" UNC X 140 MM C/W 2 NUTS, HOT DIP GALV ASTM A320 L7/A194 GR.7 STUDBOLT 7/8" UNC X 155 MM C/W 2 NUTS, HOT DIP GALV ASTM A320 L7/A194 GR.7

Description RING GASKET BX 150 316 SS RING GASKET BX 150 SOFT IRON RING GASKET BX 151 316 SS RING GASKET BX 151 SOFT IRON RING GASKET BX 152 316 SS RING GASKET BX 152 SOFT IRON RING GASKET BX 153 316 SS RING GASKET BX 153 SOFT IRON RING GASKET BX 154 316 SS RING GASKET BX 154 SOFT IRON RING GASKET BX 155 316 SS RING GASKET BX 155 SOFT IRON RING GASKET BX 156 316 SS RING GASKET BX 156 SOFT IRON RING GASKET BX 157 316 SS RING GASKET BX 157 SOFT IRON RING GASKET BX 159 316 SS RING GASKET BX-159 SOFT IRON RING GASKET BX 160 316 SS RING GASKET BX 160 SOFT IRON RING GASKET BX 163 316 SS RING GASKET BX 163 SOFT IRON RING GASKET BX 164 316 SS RING GASKET BX 164 SOFT IRON

Part Nr R169BX6 R169BXD R024R86 R024R8D R024RO6 R024ROD R024RX6 R027R86 R027R8D R027RO6 R027ROD R035R86 R035R8D R035RX6 R039R86 R039R8D R039RO6 R039ROD R039RX6 R044R86 R044R8D R044RO6 R044RX6 R044RXD

Description RING GASKET BX 169 316 SS RING GASKET BX 169 SOFT IRON RING GASKET R-24 SS316 OCT RING GASKET R-24 SOFT IRON OCT RING GASKET R-24 316 SS OVAL RING GASKET R-24 SOFT IRON OVAL RING GASKET RX-24 316 SS RING GASKET R-27 SS316 OCT RING GASKET R-27 D SOFT IRON OCT RING GASKET R-27 316 SS OVAL RING GASKET R-27 SOFT IRON OVAL RING GASKET R-35 316 SS OCTA RING GASKET R-35 SOFT IRON OCTA RING GASKET RX-35 316 SS RING GASKET R-39 SS316 OCT RING GASKET R-39 SOFT IRON OCT RING GASKET R-39 316 SS OVAL RING GASKET R-39 SOFT IRON OVAL RING GASKET RX-39 316 SS RING GASKET R-44 SS316 OCT RING GASKET R-44 SOFT IRON OCTA RING GASKET R-44 316 SS OVAL RING GASKET RX-44 316 SS RING GASKET RX-44 SOFT IRON

22.

Other API Valves & Manifolds

API related valves, manifolds & systems in Mento portfolio

Choke valves

Diverter valves

Plug valves

Relief valves

Control panels

Systems

Other Mento products Five Hoses. Two Fittings. One Solution.

OILFIELD SUPPLY • Riser Tensioner Fluids • BOP Control Fluids

Environmentally friendly • Thread Compounds • Jacking system grease • Valve grease

HOSES

Five Hoses • Two Fittings • One Solution

Flexible Choke & Kill Line with TauroFlon™ liner (up to 130oC) Diaphragm Pumps N° 403-M

Hoses for all types of media GLOBALCORE ™

The world’s first high-performance, cohesive hose and fitting system.

MECHANICAL SOLUTIONS • Engineering • Machining • Fabrication • Service

Wide range of Bulk Loading Hoses

VALVES

Mud, API Gate & Chokes

FILTRATION

Butterfly Valves (soft seat & high perfomance)

Plug Valves

Ball

Gate, Globe & Check

Control Valves

All brands Filter Units for • Engine • HVAC • Process & Diesel Membrane Filter

Tailor made Filter Solutions

FLOWLINE EQUIPMENT Sale • Rental • Service

Contakt Mento for more information

STAVANGER • BERGEN • KRISTIANSUND • HAMMERFEST +47 48 11 03 00 • 24h +47 90 19 51 55 • post@mento.no • mento.no