I-SERIES Pro Touring LED Displays
www .M ega S ystems I nc . com
I Sales@M egaS ystemsI nc .com I 866-460-MEGA (6342)
The exclusive distributor of Dicolor in the USA
RUGGED, CURVABLE, VIVID CLARITY DICOLOR I-SERIES LED DISPLAYS I-501 LED Display
KEY BENEFITS U-501 LED Display
High contrast, high grayscale, vivid image quality display Bright Lightweight and slim design
Die-cast aluminum cabinet greatly improved flatness of the display surface and gaps between panels.
Outdoor IP rated models available
Broad viewing angle
Blow through transparent models available
Professional connections
Quiet operation
Fly or ground-stack installation options
Low power consumption
ETL listed
Tool-less assembly. Installation is fast and easy taking less than 10 seconds per panel
1 year limited warranty and support on manufactures defects
Thermally efficient module design helps reduce heat within the display
Feature full Dicolor sending and receiving cards with display calibration
Curve panels -/+6째 with side latch hardware
Lowered transportation costs with lighter and slimmer cabinets
rated
Nuetrik
THIN & LIGHTWEIGHT
25.2”/640mm
33 lbs /15 kgs
4.2” /106mm
25.2”/640mm
I-120D shown. Weights, dimensions, transparency, LED configuration and connections vary from model to model.
I-16 LED Display Ukraine
PARTS DIAGRAM
Locking Latch Spring Bolt
PowerCon Power Output
Side Latch Handle Power and Signal Indicator Light
Handle
PowerCon Power Input
Signal Connection
Signal Connection I-501 shown. Weights, dimensions, transparency, LED configuration and connections vary from model to model.
Fine Adjustment Screw
I-501 LED Display USA
POWER, SIGNAL & CONNECTIONS
110-240 VAC Auto Switching
Signal input PC
Dicore drive system with DVI signal input
I-120D LED Display Lamb of God
Panel in power cable: Neutrik PowerCon Panel out power cable: Neutrik PowerCon Signal input and output: Neutrik EtherCon
TOOL-LESS ASSEMBLY
The I-Series is easy assembly. No tools are required to put these panels together. Attach the side latch hardware, then lock the top latch and secure the spring bolts. Each panel takes less than 10 seconds to install. Side Latch
Argentina
Top Latch
Spring Bolt
I-501 LED Display Turkey
CURVE INSTALLATION
The side latches on the I-series allow the panels to be installed with a -/+ 6째 curve without loss of pitch.
I-501 LED Display USA
SPECIFICA
MODEL
PIXEL PITCH
PANEL RESOLUTION
LED CONFIGURATION
VIEWABLE ANGLE
128 X 128
PIXELS PER DISPLAY 16,384
I-501
5MM
I-501-H
MAX POWER CONSUMPTION (PER PANEL) ≤ 200W AVERAGE 56W
SMD3528
140°/120°
5MM
128 X 128
16,384
SMD3528+HIGH REFRESH RATE
140°/120°
≤ 200W AVERAGE 56W
I-801
8MM
80 X 80
6,400
SMD3528
140°/120°
≤ 120W AVERAGE 34W
I-801-H
8MM
80 X 80
6,400
SMD3528+HIGH REFRESH RATE
140°/120°
≤ 120W AVERAGE 34W
I-101
10MM
64 X 64
4,096
SMD3528
140°/120°
≤ 120W AVERAGE 34W
I-101-H
10MM
64 X 64
4,096
SMD3528+HIGH REFRESH RATE
140°/120°
≤ 120W AVERAGE 34W
I-800
8MM
80 X 80
6,400
SMD3535
140°/120°
≤ 260W AVERAGE 73W
I-800-H
8MM
80 X 80
6,400
SMD3535+HIGH REFRESH RATE
140°/120°
≤ 260W AVERAGE 73W
I-100
10MM
64 X 64
4,096
SMD3535
140°/140°
≤260W
I-100-H
10MM
64 X 64
4,096
SMD3535+HIGH REFRESH RATE
140°/140°
≤260W
I-100D
10MM
64 X 64
4,096
DIP3146
140°/140°
≤ 200W AVERAGE 56W
I-100D-H
10MM
64 X 64
4,096
DIP 3146+HIGH REFRESH RATE
140°/140°
≤ 200W AVERAGE 56W
I-120D
12.8MM
50 X 50
2,500
DIP3146
140°/120°
≤ 170W AVERAGE 48W
I-120D-H
12.8MM
50 X 50
2,500
DIP 3146+HIGH REFRESH RATE
140°/120°
≤ 170W AVERAGE 48W
I-160D
16MM
40 X 40
1,600
DIP 3146
120°/50°
≤ 200W AVERAGE 56W
I-160D-H
16MM
40 X 40
1,600
DIP 3146+HIGH REFRESH RATE
120°/50°
≤ 200W AVERAGE 56W
I-200D
20MM
32 X 32
1,024
DIP3146
140°/120°
≤ 220W AVERAGE 59W
I-200D-H
20MM
32 X 32
1,024
DIP 3146+HIGH REFRESH RATE
140°/120°
≤ 220W AVERAGE 59W
Specifications are subject to change without notice. C
ICATIONS
IP RATING
WEIGHT
CABINET SIZE
BRIGHTNESS
REFRESH RATE
CONTRAST
N
E
IP30
30.5 LBS 13.875 KGS
25.2” X 25.2” X 3.7” 640 X 640 X 94 MM
≥1800 CD/M²
600HZ
450
VIEWING DISTANCE (FT) 33 FT
E
IP30
30.5 LBS 13.875 KGS
25.2” X 25.2” X 3.7” 640 X 640 X 94 MM
≥1800 CD/M²
2000HZ
1050
33 FT
1/16
E
IP30
30.5 LBS 13.875 KGS
25.2” X 25.2” X 3.7” 640 X 640 X 94 MM
≥1600 CD/M²
600HZ
500
53 FT
1/4
E
IP30
30.5 LBS 13.875 KGS
25.2” X 25.2” X 3.7” 640 X 640 X 94 MM
≥1600 CD/M²
800HZ
800
83 FT
1/4
E
IP30
30.5 LBS 13.875 KGS
25.2” X 25.2” X 3.7” 640 X 640 X 94 MM
≥1200 CD/M²
600HZ
500
66 FT
1/8
E
IP30
30.5 LBS 13.875 KGS
25.2” X 25.2” X 3.7” 640 X 640 X 94 MM
≥1200 CD/M²
1500HZ
800
66 FT
1/8
E
IP65
31.3 LBS 14.208 KGS
25.2” X 25.2” X 3.9” 640 X 640 X 98 MM
≥4000 CD/M²
600HZ
1100
53 FT
1/4
E
IP65
31.3 LBS 14.208 KGS
25.2” X 25.2” X 3.9” 640 X 640 X 98 MM
≥4000 CD/M²
800HZ
1700
53 FT
1/4
IP65
31.3 LBS 14.208 KGS
25.2” X 25.2” X 3.9” 640 X 640 X 98 MM
≥4000 CD/M²
600HZ
1100
66 FT
1/4
IP65
31.3 LBS 14.208 KGS
25.2” X 25.2” X 3.9” 640 X 640 X 98 MM
≥4000 CD/M²
800HZ
1700
66 FT
1/4
E
IP65
33 LBS 15 KGS
25.2” X 25.2” X 4.2” 640 X 640 X 106 MM
≥ 6500 CD/M²
600HZ
1500
66 FT
1/4
E
IP65
33 LBS 15 KGS
25.2” X 25.2” X 4.2” 640 X 640 X 106 MM
≥ 6500 CD/M²
800HZ
2100
66 FT
1/4
E
IP65
33 LBS 15 KGS
25.2” X 25.2” X 4.2” 640 X 640 X 106 MM
≥5500 CD/M²
600HZ
1500
79 FT
1/5
E
IP65
33 LBS 15 KGS
25.2” X 25.2” X 4.2” 640 X 640 X 106 MM
≥5500 CD/M²
2000HZ
2100
79 FT
1/5
E
IP65
33 LBS 15 KGS
25.2” X 25.2” X 4.2” 640 X 640 X 106 MM
≥7000 CD/M²
600HZ
1500
105 FT
STATIC
E
IP65
33 LBS 15 KGS
25.2” X 25.2” X 4.2” 640 X 640 X 106 MM
≥7000 CD/M²
1000HZ
2100
105 FT
STATIC
E
IP65
33 LBS 15 KGS
25.2” X 25.2” X 4.2” 640 X 640 X 106 MM
≥6000 CD/M²
600HZ
1500
131 FT
STATIC
E
IP65
33 LBS 15 KGS
25.2” X 25.2” X 4.2” 640 X 640 X 106 MM
≥6000 CD/M²
1000HZ
2100
131 FT
STATIC
ice. Custom configurations available upon request.
DRIVE METHOD 1/16
TOLERANCE
FINE ADJUSTMENT
The tolerance is 0.1mm for the enclosure and 0.5mm of the screen flatness and gap between screens
The panel can be adjusted to align during installation on all four sides by using the inner hexagon spanner to adjust the screw
Fine adjustment screw
MOUNTING HARDWARE Dicolor offers both hanging beam and ground support hardware. The hanging beams come in three sizes and can be joined to create custom configurations.
Hanging Beam 3 [6.30’/1.92m] (Model DI-FB-I10) Hanging Beam 2 [4.20’/1.28m] (Model DI-FB-I2C) Hanging Beam 1 [2.10’/0.64m] (Model DI-FB-I3C)
Ground Support Base (Model DI-IBASE)
ETL LISTED
OUTDOOR IP RATED OPTIONS Most of the panels in the I-Series are outdoor rated. Reference the specifications for the list of panels that are rated IP 65.
ROAD CASE
SENDING & RECEIVING CARD
6 Panel Mid Duty Case [3.22’ x 3.15’ x 2.33’/0.98 x 0.96 x 0.71m] (DI-IC6)
The Dicore sending and receiving card pixel maps each display and has several other useful benefits that will make installing and running your wall simple and easy. Signal redundancy - If a cable fails, Dicore sends the signal from another panel to the failed one. This protects output of your display. Data saved to Dicore sending card - If a panel goes bad, simply replace it and it will work the same (unlike other panels which save the data directly to the panel). Calibration - The hue, saturation and brightness can be adjusted between panels.
ABOUT DICOLOR Dicolor is a leading manufacturers of professional LED Displays worldwide. They have sales and distributions in Germany, Latin America and North America. Since being established in 2006, their products have been used world wide in headlining tours and international events. Their manufacturing facility utilizes state-of-the-art automated machinery to produce up to 8000 sqm of LED Displays monthly. Innovation is their top priority, with 14% of their employees working in research and development. Mega Systems, Inc. is proud to be the exclusive Distributor in the USA for Dicolor. We offer the best sales and service support which can only be seen by a family-owned and operated business.
I-501 LED Display USA
www .M ega S ystems I nc . com
I Sales@M egaS ystemsI nc .com I 866-460-MEGA (6342)
The exclusive distributor of Dicolor in the USA