Wood Construction Connectors
CODE REPORTS CODE REFERENCE KEY CHART
The alpha-numeric “Code Reference numbers” that appear in the “Code Reference” column in load tables throughout this catalog are intended to identify products listed in evaluation agency reports, typically called “code reports”, and the specific reports that cover them. The letter designates which evaluation agency from which the report was obtained. The Code reference column, used in conjunction with the chart at right, indicates which code listing applies to a product. The reference numbers also clearly identify:
AGENCY
CODE LISTING
CODE REF.
ICC-ES ESR
ESR-1161 ESR-2203 ESR-1622 ESR-2105 ESR-2236 ESR-2330 ESR-2549 ESR-2551 ESR-2552 ESR-2553 ESR-2554 ESR-2604 ESR-2605 ESR-2606 ESR-2607 ESR-2608 ESR-2613 ESR-2614 ESR-2615 ESR-2616 ESR-2877 ESR-2555 ESR-2611 ESR-3046 ESR-2920 ESR-2320 ESR-3096 ESR-3050
I1 I2 I3 I4 I5 I6 I7 I8 I9 I10 I11 I12 I13 I14 I15 I16 I17 I18 I19 I20 I21 I22 I23 I24 I25 I26 I27 I28
RR 25711 RR 25712 RR 25713 RR 25714 RR 25910 RR 25718 RR 25719 RR 25720 RR 25725 RR 25726 RR 25800 RR 25801 RR 25462 RR 25803 RR 25804 RR 25806 RR 25807 RR 25814 RR 25818 RR 25827 RR 25828 RR 25851 RR25906 RR25907 RR25952 RR25962 RR25985
L1 L2 L3 L4 L5 L6 L7 L8 L9 L10 L11 L12 L13 L14 L15 L16 L17 L18 L19 L20 L21 L22 L23 L24 L25 L26 L27
• Products submitted for evaluation report listing (160) • Products with no evaluation report listing (170) • Products not submitted because they have no load rating and an evaluation report listing is not necessary (180) • Products that meet prescriptive or conventional construction code requirements (190) • Product is tested per code; testing is not required (200) Where a model has been submitted for listing (160) or does not have an evaluation report listing (170), Simpson Strong-Tie can supply complete test data to support our published loads. Please contact us for a copy of our product test documentation at (800) 999-5099. Product acceptance may be obtained through the Alternate Methods and Materials section of the applicable building code. Some loads and applications may not be covered in the code report and specific reductions and restrictions may be required by other product evaluation agencies. Visit www.strongtie.com or visit the product evaluation agencies’ web sites for the current evaluation reports. Simpson Strong-Tie ® products are listed by several product evaluation agencies. Agencies that list our products include ICC-ES; IAPMO UES; UL, FM, the City of Los Angeles, California; and State of Florida. Simpson Strong-Tie currently maintains more than 60 ICC-ES ESR and IAPMO UES ER reports evaluated to the 2006/2009/2012 IBC and IRC. We continue to submit product information to ICC-ES in order to update reports or receive additional reports for products in compliance with the latest codes. To quickly determine which of our stamped and welded connector products are listed in ESR reports, we have obtained ICC-ES ESR-2523 index report. This report is a reference document to other ESR reports held by Simpson Strong-Tie and will be updated frequently by ICC-ES as new stamped and welded connector evaluation services reports are issued. Please visit www.strongtie.com for the latest information or contact ICC Evaluation Service at www.icc-es.org. IAPMO Uniform Evaluation Service has been evaluating products for more than 80 years and has the same ANSI accreditation as ICC Evaluation Service for evaluating structural building products to the building codes. IAPMO UES began evaluating structural building products in 2004, utilizing licensed structural engineers to perform quality reviews. To quickly determine which of our stamped and welded connector products are listed in ER reports, we have obtained IAPMO UES ER-102 index report, which will be updated frequently as products are added to ERs. Please visit www.strongtie.com for the latest information or contact IAPMO Uniform Evaluation Service at www.iapmoes.org. In November 2010, the California Division of the State Architect, issued a revised IR 23-1. The revised Interpretation of Regulation (IR) addresses and clarifies issues relating to Pre-fabricated Wood Construction Connectors. IR 23-1 defines the Purpose and Scope and clarifies Listing Requirements, Acceptable Load Capacities, Design Requirements, Installation Requirements Connector Fabrication (which addresses corrosion resistant material and/or coatings), and testing requirements. Also IRA-5, updated in October 2012, addresses product and evaluation report acceptance. Please contact the DSA at www.dsa.dgs.ca.gov/Publications/default.htm for more information.
City of Los Angeles, California
On October 1, 2003, the State of Florida’s Statewide Product Approval System became effective. The purpose of this system is to provide a single product evaluation and approval system that applies statewide to operate in coordination with the Florida Building Code. This Florida product evaluation and approval system is governed by Florida Statutes, Chapter 553, Section 553.842. Since this law specifies that the product approval system is to apply statewide, Notice of Acceptance is no longer necessary where a product has a statewide approval that is applicable in the High Velocity Hurricane Zone (HVHZ) and is installed in accordance with its conditions of use. To access pertinent code reports related to Simpson Strong-Tie ® products, you can access our Code Report Finder Software at www.strongtie.com/software. 12
AGENCY
CODE LISTING
CODE REF.
IAPMO UES ER
ER-112 ER-130 ER-143 ER-192 ER-262 ER-280
IP1 IP2 IP3 IP4 IP5 IP6
State of Florida
FL10849 FL10852 FL10854 FL11496 FL10441 FL10655 FL10447 FL10531 FL10856 FL10444 FL10860 FL10861 FL10446 FL15895 FL10864 FL10456 FL10865 FL10667 FL10866 FL9589 FL11166 FL11169 FL11468 FL13904 FL11478 FL11470 FL11473 FL12708 FL13326 FL13628 FL14101 FL13975 FL14571 FL15957 FL2355
F1 F2 F3 F4 F5 F6 F7 F8 F9 F10 F11 F12 F13 F14 F15 F16 F17 F18 F19 F20 F21 F22 F23 F24 F25 F26 F27 F28 F29 F30 F31 F32 F33 F34 F35
Call us for Submitted Status and for Listing Test Data
160
No Code Listing
Call us for Test Data
170
No Load Rating
—
180
Prescriptive Code
—
190
* Because code reports can be issued throughout the year, we encourage
the user to visit www.strongtie.com, www.icc-es.org, www.iapmoes.org, www.ladbs.org, www.dsa.dgs.ca.gov, and www.floridabuilding.org for the most current information, call Simpson Strong-Tie at 800-999-5099, or contact the code agency directly.
C-C-2015 © 2015 SIMPSON STRONG-TIE COMPANY INC. PRINTED 12/14
Code Reference Column in Load Tables