TOPREASONSWHYEDMMACHINERYIS
BETTERTHANTRADITIONALMACHINERY
The EDM Machining is ideally used in some of the Erowa Systems and equipment to manufacture the steel machinery parts. To create the abundance of the metal components the EDM wire employs in the electrical charge and metal conducive to the electricity. The wire EDM machining uses the brass wire that is issued from the spool and runs from the upper and the lower.
The EDM manufacturing and the prototyping process for the machine metal parts. It works similarly to the CNC machine but the EDM machine uses the electrical discharge to cutting the metal and the sharp tool. The CNC Control the direct movement of wires placed on machinery that allows you to create the path for it to follow. The following are a few reasons that make the EDM machinery different from traditional machining method:
Effective Handling
Titanium, toughened steel, tool steel, carbides, and carbide alloys are just some of the metals that can be processed by EDM machines. Difficult metals are expensive and require special attention to reduce metals with precision not possible with traditional machining methods. Cutting cemented carbide in a normal process produces scrap, which can be reduced by using EDM machining.
Deep Cutting
Tools with a high length-to-diameter ratio can cause chatter (excessive vibration of the tool) and reduce machining quality, which is large for deep cutting and cavities when using milling machines with traditional machines. You need a cutting tool. EDM is not sensitive to chatter and is suitable for very deep cuts. In most cases, EDM can comfortably create holes with a lengthto-diameter ratio of up to 20: 1, but in other cases, this ratio can be as high. Height of 100: 1.