Arrow selection...
The Original MaxCam™
Determining Proper Arrow Length The first step in selecting your arrows is to determine your arrow length. This is determined by several factors, including arm length and full-draw anchor position. If you are using an overdraw, you can mark the arrow just in front of the rest. The distance from your mark to the string groove in the arrow nock will be your correct arrow length. Your Mathews retailer can be an invaluable help in this process.
Using the Easton Shaft Selection Chart
(see pages 12 & 13)
After you’ve determined your arrow length, find its corresponding measure in the length column. Move down this column until you reach the correct draw weight of your bow. The correct spine for your arrow is found where your draw length and weight intersect. Use the “hard cam” category on the chart for a Mathews SoloCam bow.
String and cable lengths for each Mathews bow The Zebra ZS Twist bowstring is standard on all Mathews bows. It combines bundles of low-stretch, multifilament strands counter-twisted to form a perfectly balanced bowstring that does not rotate as the bow is drawn. Your peep comes to perfect position every time – without the need for rubber tubing and other alignment devices. Plus, peep installation is easier than ever. Following is a list of the string and cable lengths required for each Mathews model:
Model Legacy Icon Sportsman SQ2 SQ2 (291/2" OR 30" draw) Ultra 2 Ultra 2 (Mini Max) Conquest 2 Conquest 2 (Mini Max) Q2 Q2 (291/2", 30" draw) Q2XL Q2XL (301/2" or 31" draw) FX FX (Mini Max) MQ-32" (70%) MQ-32" (80%) MQ1 (70%) MQ1 (80%) Rival Pro Black Max
10
String Length
Cable Length
91 /4" 967/8" 901/16" 841/2" 855/8" 931/8" 88" 1033/4" 987/16" 901/4" 915/16" 973/4" 991/8" 901/16" 833/4" 851/2" 881/8" 951/16" 975/8" 971/4" 93 1/8"
361/4" 397/16" 37" 3311/16" 333/4" 387/8" 377/8" 44" 43" 361/2" 365/8" 40 3/16" 401/2" 371/4" 357/8" 34" 337/8" 385/8" 381/2" 421/2" 385/8"
3
The revolutionary perimeter-weighted cam that started it all, the Original MaxCam is available on the Conquest 2, FX, Ultra 2, and Black Max. It generates incredible arrow speed while also remarkably reducing recoil, thanks to perimeter-weighting. The Original MaxCam™ is available with 65% and 80% let-off.
Cam
Conquest 2
FX
Ultra 2
Let-off (%)
RH or LH
Z-AAR-HL Z-BBR-HL Z-CCR-HL Z-DDR-HL Z-EER-HL Z-AAL-HL Z-BBL-HL Z-CCL-HL Z-DDL-HL Z-EEL-HL Z-AAR Z-BBR Z-CCR Z-DDR Z-EER Z-AAL Z-BBL Z-CCL Z-DDL Z-EEL
32" 31" 30" 29" 28" 32" 31" 30" 29" 28" 32" 31" 30" 29" 28" 32" 31" 30" 29" 28"
31" 30" 29" 28" 27" 31" 30" 29" 28" 27" 31" 30" 29" 28" 27" 31" 30" 29" 28" 27"
30" 29" 28" 27" 26" 30" 29" 28" 27" 26" 30" 29" 28" 27" 26" 30" 29" 28" 27" 26"
80 80 80 80 80 80 80 80 80 80 65 65 65 65 65 65 65 65 65 65
RH RH RH RH RH LH LH LH LH LH RH RH RH RH RH LH LH LH LH LH
Mini MaxCam™ Now shorter-draw-length shooters can get all the advantages of perimeter weighting. Available on Mathews FX, Ultra 2, Rival Pro and Conquest 2 models, this cam accommodates draw lengths as short as 22" with peak draw weights down to 35 pounds. The Mini MaxCam™ is available only with 65% let-off and has approximately a 1/2" adjustment range. Note: The Mini MaxCam requires a different idler wheel and string/cable lengths.
Cam MINIMAX-DDR MINIMAX-EER MINIMAX-FFR MINIMAX-GGR MINIMAX-HHR MINIMAX-IIR MINIMAX-DDL MINIMAX-EEL MINIMAX-FFL MINIMAX-GGL MINIMAX-HHL MINIMAX-IIL
Ultra 2
FX
Rival Pro
Conquest 2
Let-off (%)
RH or LH
27" 26" 25" 24" 23" 22" 27" 26" 25" 24" 23" 22"
28" 27" 26" 25" 24" 23" 28" 27" 26" 25" 24" 23"
30" 29" 28" 27" 26" 25" 30" 29" 28" 27" 26" 25"
29" 28" 27" 26" 25" 24" 29" 28" 27" 26" 25" 24"
65 65 65 65 65 65 65 65 65 65 65 65
RH RH RH RH RH RH LH LH LH LH LH LH 7