http://msshouston.com/
Building Elevated Platforms for Stage Productions Elevated platform are important prop for stage performances. Short elevated platforms are frequently utilized as risers for choirs throughout concert performances. Taller platforms are utilized to rig lights and make elevated locations for cast looks. For high and low platforms, the most crucial factor may be the safety of individuals who get up on the platforms and individuals who've just to walk, work and perform around them. Low Wood Platforms 1.
Develop a rectangular floor platform. Begin by creating a 48-inch-by96-inch platform from 2-by-4's. Turn the lumber on its edge therefore the narrow edge sits on the ground, and points upward. This can produce the most powerful platform. Cut the lumber therefore the outdoors diameter from the platform is 48 inches by 96 inches. Arrange the interior joists so that they are 16 inches on center aside from each other, after which screw the wood pieces together by driving screws with the outer perimeter pieces known as “cords,� in to the finishes from the inner joists. Make certain the very best edges of all of the 2-by-4's are flush with each other.
2.
Sheath the working platform. Nail one sheet of OSB flakeboard to the top of platform. Nail the sheet lower with 1 3/8-inch ring shank nails to ensure that the perimeters from the board are flush using the outdoors fringe of the working platform.
3.
Add some legs. Cut 4-by-4's towards the height you demand for platforms. Position one leg in every corner from the platform. When the platform holds greater than six people, put legs in the center of the 96-inch-lengthy side too. Screw the legs towards the platform with the outer perimeter cord and thru the flooring on top of the working platform. When the platform is much more than one foot tall, cut 2-by4's on the 45-degree position, and employ them as braces for that legs therefore the platform does not create a wobble.
4.
Apply flooring. The OSB flakeboard is clever when uncovered, so cut a bit of affordable carpeting having a utility knife that's eight to twelve inches bigger compared to platform. Tack carpeting round the perimeter of the top of platform, after which wrap carpeting lower within the sides from the platform. Make use of the ring shank nails and tack carpeting in position.
5.
Fresh paint if required. Most stage productions require props to match the dark background objects. When the platform is seen, fresh paint the uncovered light-colored wood legs with black or dark-grey fresh paint.
Greater Tower Platforms 6.
Determine the required height. Scaffold is made from 48-inch tall sections. Determine the appropriate height for that high platform or tower in line with the production or lighting specifications.
7.
Assemble a scaffold tower. Scaffold requires no tools when putting together. An finish frame is first connected to the crosspieces, and so the crosspieces attach to another finish piece. The finish pieces stack on the top of each other, and also the entire tower assembles just like a large form of a LEGO play set. Once erected, the towers are ridged, and safe to climb.
8.
Install guard rails. Before while using tower, install some guard rails on top degree of the tower. These guard rails safeguard employees and equipment from accidentally sliding from the edge.
9.
Install outrigger legs. When the tower is much more than 15 ft. tall, you might want to, or perhaps be needed to, install outrigger legs.
These legs extend the bottom of the tower outward, and make up a more stable structure. In case your tower is much more than three sections tall, consult local place of work safety government bodies to make sure your production works within local rules. Learn more about industrial mezzanine at Material Storage Systems, Inc.