MARAIS GROUPE
Offset Wheel Trencher for the mechanical laying of networks
SMC 201 R Process
Simultaneaous performance of trenches and mechanical laying for the deployment of networks (telecom, electricity, drainage, water, sanitation, gas, etc…)
angentially driven trenching T wheel designed by Marais
Specific Features utting outside the overall sizes C of the machine : with mass transfer on opposite track : 350 mm onstant and reduced width C of the trench, Constant building cost per meter on-stop shielding of the cut N trench : the laying unit, Preservation of the geometric data of the cut trench, Compliance with the bending radius of the cables and the ducts. uality of the trench bottom : Q the shoe. Smooth clean and compact trench bottom without any salient angle. etwork laying quality. N Constant depth, Constant altimetry and planimetry of the laid network.
Assets Cutting of different grounds utting configuration along C roads in ditch bottom, behind safety barriers or along railways. Compliance with the bending radius of the cables and the ducts Reduction in building costs
Innovations riving seat platform mouted D on the machine Radio remote control Central greasing Low center of gravity
Output rom 300 to 2,000 lm/ F day depending on the grounds,sections of trenches and nature of the network to be laid
Features of the trenching tool Type : M arais tangentially driven trenching wheel Working widths : 280, 300, 350 mm Minimum depth : 0.50 m Maximum depth : 1.40 m
Cutting tool mounted on a double pivot Slope correction of the tool
Sizes and weight of the unit ength in working position : approx 16 m L (with reel and fiber laying unit) Length in transport position : approx 11 m Width : 2.50 m Height : 3.20 m Weight : 27 tons
Motor drive system 475 HP (350 kW) diesel thermal motor
Technical diagram
Accessories eel carrier in front of the machine R (capacity : 5.2 tons) Removable guardrails on the machine aying units : fiber optic, electricity, drainage, L HDPE, root-proof screen, warning grid, cable tightener oating materials of networks : sand sprayer, C concrete hopper with vibrating unit, excavated material screen, backfiller Combs and guide rollers.
MARAIS GROUPE
www.samarais.com
ZA Les Portes de l’Anjou 1, rue Pierre et Marie CURIE BP 20 - 49430 DURTAL (France) Tél. : 33 (0)2 41 96 16 90 / Fax : 33 (0)2 41 96 16 99 e-mail : info@samarais.com
SMC_201R_ENG _03/12 - Specifications as shown are not binding to the manufacturer and may be changed without prior notice. The equipment offered in this leaflet can include optional fittings and devices.
ateral offset of the tool outside the machine : 350 mm L on the left and right side