Note
To begin
Basic working method and markings
Tools and materials needed -Ruler - scissors - blade cutter or "Exacto-knife" - awl or other pointed tool (for making a folding crease) - felt pen - pin set - glue - hand towel ( for cleaning your fingers) dictionary or other heavy book ( to press the papers flat).
Solid lines
Fold along these lines. The printed surface should be on the outside of the folded shape.
Items of Caution *Take care when using sharp or pointed objects or when using bladed cutting tools. Place a heavy sheet of paper under the paper you want to cut. *Use glue and other adhesives only in well-ventilated areas. *When printing, use a slightly reduced font size. There may be differences in dimensions, depending on the type of printer used.
Broken lines
Fold along these lines. The printed surface should be on the inside of the folded shape. Dotted line
Cut along these lines.
How to assemble *Follow the working method and markings carefully. *Cut carefully along the outter line with cutting blade, Exacto-knife or scissors.
Do not fold or cut the parts marked .
One - point Advice *Cut carefully with cutting blade, Exacto-knife or scissors.
Cut out parts marked with an asterisk(*).
*For folding parts, first use an awl or other pointed tool to make a light crease along the dotted or solid line. This will make the folds straight. Avoid making strong creases, as this will cause the paper to tear. *As an adhesive, white wood glue is recommended. Avoid over application as this may cause the paper to wrinkle.
Red dots are the reference positions for gluing surfaces.
*Before beginning assembly, test adhesive amounts on extra paper. *Occasionally, white spots will be apparent on folds and cuts. Use a marker or pencil to fill in these spots. It is recommended that this be done after each stage of assembly because coloring becomes more difficult once parts are assembled.
Please glue them by aligning the red and red/blue and blue parts if they are marked on the paper. 2
11 Assembling the Tail Light First, assemble each component by following the working method and markings. Then, refer to the illustration and
Fold or Curve
Indication of Working Methods
Glue
photos below to glue the parts together.
Tail Light
Fold each relevant part according to the assembly symbols.
Sheet L, 14 parts in total
Please use the
dots on each component as reference when gluing surfaces.
Connect each of the previously assembled parts in order from 1 - 10 according to the diagram.
L- 11
7 L- 12
L- 8
6
1
L- 13
2
L- 14
L- 7 L- 10
3
4
4 8 L- 1
9 10
L- 3
L- 6
4 L- 5
L- 4
10
5
L- 2
9 8
L- 9
Reference photo
3
12 Assembling the Front Tire First, assemble each component by following the working method and markings. Then, refer to the illustration and
Fold or Curve
Indication of Working Methods
photos below to glue the parts together.
Front Tire
Fold each relevant part according to the assembly symbols.
Sheet M, 12 parts in total
Please use the
Glue in order from 1 to
6
dots on each component as reference when gluing surfaces.
on the graphic.
M - 15
M - 13 M - 21
6
3 6 2
1 M - 17
4
M - 22
M - 16
5
M - 23
M - 20
6 M - 19
1
4
2
6 M - 12
Reference photo
3
M - 18
M - 14
4
Glue
12 Assembling the Front Tire First, assemble each component by following the working method and markings. Then, refer to the illustration and
Fold or Curve
Indication of Working Methods
Glue
photos below to glue the parts together.
Front Tire
Fold each relevant part according to the assembly symbols.
Sheet M, 23 parts in total
Please use the
dots on each component as reference when gluing surfaces.
Connect each of the previously assembled parts in order from 1 - 6 according to the diagram. Front Tire
M-6
4
M-5
5
4 M-3
6 4
5
M - 11
M-9
5
M-1
M-2
2 M-4
4
5
3
1
6 2
M-7
M-8
M - 10
Reference photo
5
13 Assembling the Rear Tire First, assemble each component by following the working method and markings. Then, refer to the illustration and
Fold or Curve
Indication of Working Methods
photos below to glue the parts together.
Rear Tire
Fold each relevant part according to the assembly symbols.
Sheet N, 12 parts in total
Please use the
Glue in order from 1 to
6
dots on each component as reference when gluing surfaces.
on the graphic.
N - 11 N - 15
3
N-9
6
2
6
1 N - 13
4
N - 17
N - 12
5 N - 19
N - 18
6
1
N - 16
4 6
2
N-8
Reference photo
3
N - 14
N - 10
6
Glue
13 Assembling the Rear Tire First, assemble each component by following the working method and markings. Then, refer to the illustration and
Fold or Curve
Indication of Working Methods
Glue
photos below to glue the parts together.
Rear Tire
Fold each relevant part according to the assembly symbols.
Sheet N, 19 parts in total
Please use the
dots on each component as reference when gluing surfaces.
Connect each of the previously assembled parts in order from 1 - 4 according to the diagram.
Rear Tire
N-3
2
N-6
2
3 N-2
3
2 3 1
N-5
3
2
4
N-1
N-7 N-4
Reference photo
7
14 Finish Please use the
Connect each of the previously assembled parts in order from 1 - 18 according to the diagram. 1
Glue the engine onto the lower part of the frame.
Exhaust Pipes 1
3
Insert the intake to the engine.
4
Insert Exhaust 2 and 3 into the engine.
5
Insert Exhaust 5 into Exhaust 2 and 3, then glue them to the frame.
6
Glue the tail light to the frame.
7
Glue Exhaust 1 to the seat.
8
Glue the seat to the frame.
9
Glue the tank to the frame.
10
Insert Exhaust 4 into Exhaust 1 and 5.
11
Glue the rear tire to the rear arm.
12
Glue the rear arm to the frame.
13
Glue the side cover to the frame and the engine.
14
Glue the left footrests to rear arm.
15
Glue the right footrests to the engine.
16
Put the lower part of the steering through the frame and glue it to the upper part of the steering.
8
7
10
Headlight
Glue the lower part of the frame to the upper part of the frame.
18
Seat
9
Upper Steering Column
2
17
Fuel Tank
dots on each component as reference when gluing surfaces.
Exhaust Pipes 4
Upper Frame Column 17
10 16
Rear Tire
6 13
Side Covers
Tail light 5 12 15
10
16
Exhaust Pipes 5
Right footrests
Exhaust Pipes 2
5
13
2
Glue the headlight to the upper part of the steering.
5
11
10
4
14
Side Covers
Rear Arm
12
2
Glue front tire to the lower part of the steering. 4
Intake
3
Lower Steering Column
Engine 18
1
Exhaust Pipes 3
13
Lower Frame Column Front Tire
13
Side Covers
13
Side Covers Side Covers
8
Left footrests
15 Assembled Model and the List of Parts Please refer to the photo below when attaching each component.
RIGHT
FRONT
Seat
Frame
Engine
Sheet I, 8 parts in total
Sheet C, 75 parts in total
Sheet A, 147 parts in total
Right footrests
Exhaust Pipes
Steering
Headlight
Sheet K, 22 parts in total
Sheet H, 53 parts in total
Sheet E, 74 parts in total
Sheet F, 24 parts in total
9
15 Assembled Model and the List of Parts Please refer to the photo below when attaching each component.
LEFT
REAR
Front Tire
Fuel Tank
Rear Tire
Sheet M, 23 parts in total
Sheet G, 11 parts in total
Sheet N, 19 parts in total
Side Covers
Left footrests
Rear Arm
Tail light
Sheet B, 20 parts in total
Sheet J, 15 parts in total
Sheet D, 36 parts in total
Sheet L, 14 parts in total
10