Chapter 3 proper use and care of the usp handgun
4. Clear the USP
a. E nsure the weapon is not loaded by pulling the SLIDE rearward and visually inspecting the chamber The weapon is not loaded if there is no bullet in the chamber
5. Remove the SLIDE-STOP PIN a. P ull the SLIDE rearward until the SLIDE-STOP PIN is aligned with the TAKE-DOWN NOTCH. b. P ush the SLIDE-STOP PIN from the opposite side of the weapon until the pin begins to separate from the weapon c. R emove the SLIDE-STOP PIN by pulling it clear from the weapon while applying slight rearward pressure on the SLIDE
6. S eparate the SLIDE from the RECEIVER
a. P ull the SLIDE forward while pulling the receiver rearward from the RECIEVER
3-4