Advertorial UMG.UK
NO MORE WASTED HOURS AT THE GUILLOTINE With the coming of digital print, lower volumes and moving registration, guillotines no longer offer the best solution for finishing. Business card cutting can involve so many complex cuts that it can take an age to complete. With the Uchida register system each card is cut in the same position from sheet to sheet. No more wandering, the correct position every time. The Uchida BC-10 Business Card Cutter has become the biggest selling Automatic A4 Business Card Cutter in the UK market. The UCHIDA BC-10 Business Card Cutter works alongside any high quality digital photocopying or printing device to produce professionally cut business cards automatically, easily and fast. (250 in just over two minutes.) Whether you are a small business or large corporation producing 1000’s of cards a day, the cutting edge innovations being applied to the UCHIDA BC-10 Business Card Cutter will satisfy your every need. Easy to operate the BC-10 is designed to operate simply at the touch of a button for selecting the cutting modes, such as paper size and trimming margin. A unique automatic sharpening system means razor sharp edges at all times with a blade life of approximately 1.7 million cuts...No time wasted extracting or sending blades off to be sharpened. The position of initial cutting edge in paper feed direction is so accurate that the cut line does not deviate from the correct line throughout the cutting operation (tolerance of cut size: 0.05mm). Correction of any potential cutting line
deviation is enabled by the detection and alignment of the register line mark printed at the top of each sheet. Easy maintenance In case of a specific error, a code number is displayed on the display panel to facilitate identification of the source and help to eliminate it. Economy The Uchida cutter is 20 times more durable than that of some other cutters in this range. It can also make 10 business cards on A4 size or letter size sheet with bleed, in contrast to some other cutters that can make only eight business cards on one sheet. (ln double cut mode). For the safety of any and all personnel who will operate the BC-10 a reliable, safety Interlock system automatically stops operation while the top cover is open or if the paper waste disposal box is not set in its proper position.
The New UCHIDA VersaTrim is now available in the UK for cutting more than just business cards .. The Versatrim offers an on-demand printing solution for multiple card sizes like post cards, geeting cards, gift cards, point cards and business cards etc. This VersaTrim fully achieves "on-demand" finishing with digital printers providing excellent and precise finishing using the cut register mark detection system... The Versatrim comes • Equipped with three standard slitters for business card, post card, half cut etc. • Touch button simple operation
Cutters start from
£2295
FINANCIAL SOLUTIONS AVAILABLE
www.uchida.uk.com contact@uchida.uk.com Tel: 0800 915 4263
NEW UCHIDA AEROCUT QUATRO
A New SRA3 finishing solution in both the digital and offset field is offered by the UCHIDA AeroCut Classic and Quatro Auto Cutter and Creaser. All jobs, cutting, creasing and perforating are operated with touch screen. This enables time saving, no complicated setting and specific knowledge required. This Uchida high quality cutter, slitter and creaser can fulfill finishing result for all kinds of cards. • Six rotary slitting knives • Cross cut knife • Matrix creasing with adjustable depth • Perforation unit with twin perf wheels • Reg mark reader to eliminate print wandering • Program memory for 80 jobs • Feeds over 350gsm • Creasing • Adobe Illustrator Plugin for easy setup of (Quatro ) • Easy templates system with cut register marks