Product Information
SPECIFICATIONS Displacement Engine Type Full Throttle Operating Range Power(1) Idle RPM in Gear(2) Idle RPM in Neutral(2) Ignition Timing(2) Emission Control System: per SAE J1930(2) Fuel Requirements(2)
115, 130 Models 105.4 cu. in. (1727 cc) 60° V, 4 Cylinder, Two-Cycle, E-TEC 115 HP – 5500 to 6000 RPM 130 HP – 5500 to 6000 RPM 115 HP – 115 HP (85.8 kw) @ 5750 RPM 130 HP – 130 HP (96.9 kw) @ 5750 RPM 500 ± 50 500 ± 50 Controlled by the outboard’s EMM ECM, E-TEC (Engine Control Module, E-TEC)
87 Pump Posted AKI (90 RON) – Refer to Oil and Fuel on page 17 Oil – Lubricant Evinrude/Johnson XD100 oil or TC-W3RL NMMA-certified oil – Refer to Oil and Fuel on page 17 Warning Signals Controlled by the outboard’s EMM 675 CCA (845 MCA) 12 volt or Battery, Minimum(3)(4) 750 CCA (940 MCA) 12 volt below 32°F (0°C) Refer to ECI Label Spark Plug(2) Fuses P/N 967545 – Refer to Fuse on page 30 Fuel Filter P/N 502906 Battery Charging 50-Amp, Fully Regulated, Dual Isolated Gearcase – Lubricant Evinrude Ultra-HPF™ – Capacity L Models – 33.1 fl. oz. (980 ml) X Models – 44 fl. oz. (1300 ml) Power Trim/Tilt – Fluid Evinrude/Johnson Power Trim/Tilt and Power Steering Fluid – Capacity 21 fl. oz. (622 ml) Propeller Refer to Propeller Selection on page 42 Weight L Models – 375 lbs. (170 kg) X Models – 390 lbs. (177 kg) Sound at Driver’s Ear 79.0 dB(A) (LpA) ICOMIA 39.94 Transom Height L Models – 19 1/2 to 20 in. (495 to 508 mm) X Models – 24 1/2 to 25 in. (622 to 635 mm) (1) Rated following the standards of ICOMIA 28.83, ISO 3046 and NMMA. (2) Emission Control Information. (3) Use a 750 CCA (940 MCA) battery when operating in temperatures below 32°F (0°C). (4) Under extraordinary electrical load or environmental conditions, use a 107 amp-hour minimum battery (generally available in group 29 size).
46