FREE TOURING FREE MOUNTAIN RACE ALL MOUNTAIN JUNIOR RACE JUNIOR TECHNOLOGY
TECHNOLOGIES
ALPINE 2019/2020
FREE TOURING FREE MOUNTAIN RACE ALL MOUNTAIN JUNIOR RACE JUNIOR TECHNOLOGY
ALPINE 2019/2020
TECHNOLOGIES
SKIBOOTS
TECHNOLOGIES 4
1
POLYURETHANE: all boots in the ALLTRACK range are made from Polyurethane for better skiability and easier entry/exit.
5
100
98 mm ALLSPEED ELITE
mm
100 mm ALLSPEED PRO
102 mm
104 mm
130
130
120 110
3
The bi-injection design ensures that the entire top part of the shell as far as the front is made from a soft material, which allows wide opening of the overlaps making the boot very easy to slip on.
6
HIKE MODE
On the TRACK models, a mechanism at the rear of the cuff allows you to toggle easily between the SKI and HIKE positions. When the lever is pulled up, a slight flexion to the front is required to unlock the cuff.
110
120
110
100
110
100
90 NON RECOMMENDED NON RECOMMENDED NON RECOMMENDED
100
90
90
90
80
80
80
70
PURE
2 SCREWS
1 SCREW DOWN
1 SCREW TOP
120
120
110
100
100
100
90
80
90
90
80
75
80
80
70
65
70
70
60
NON RECOMMENDED
FULL CUSTOM T2 Mono-material padding: FLEXALON. FULL CUSTOM T3 Mono-material padding: POLYETHYLENE. CUSTOM T3/T4 Mono-material padding.
10
8
CUSTOMISATION PROCESS • Place the liners in an oven for 8 minutes at 80 °C. • Put the liners inside the shells, making sure there are no creases. • Step into the boot, tightening the buckles starting from the forefoot. • Wait 12 minutes for the thermoforming action to take effect, in a standing position at room temperature.
ROCKER HEELPIECES GRIPWALK
ALLTRACK
With Archpad
RVHLZE0
RVHLZG0
ALLTRACK
Without Archpad
STANDARD
98-100 102 mm
RVHLZF0
RVHLZD0
RVHLZH0
Alltrack Pro 100
All Models
All Models
Alltrack Pro 120 LT
Alltrack 120
Alltrack 110
Allspeed Elite
Speed
Alltrack Pro 110 LT
Alltrack Alltrack Elite 90 W 90
Allspeed Pro
Track
Alltrack Alltrack PRO 130 W Pro 110 W
Alltrack Pro Allspeed 80 Women
Evo
Alltrack Elite Alltrack 100 LT W Pro 100 W
Alltrack 80 W
Pure Comfort
Alltrack Elite 120 W
Alltrack 70 Pure Pro Women
Track Women
Alltrack Rental
Pure
Kelia
Alltrack Rental W
Hero Wc 130 Medium
Alltrack Jr 80
Hero Wc 110 Medium
Pure Elite
Rossignol liners have excellent thermal insulation thanks to the use of different thermal insulating materials.
THINSULATE®: This insulating fibre does not affect the technical properties of our liners, but enables excellent foot envelopment for great skiability.
STANDARD
104 mm
Alltrack Alltrack Elite 130 LT Pro 120
THERMAL INSULATION
THINSULATE® STRETCH: This very thin fibre is used mainly in clothing thanks to its elasticity which supports freedom of movement. In a liner, it works ideally with the other materials to provide perfect foot support for great skiability.
Table showing boot compatibility (see tab below) with GRIPWALK Rocker and Touring standard (ISO 9523) heelpieces available as a kit. With LT inserts
LINERS CUSTOMISATION
All the liner models in the ALLSPEED and PURE ranges can be customised, with the exception of the T4 version.
11
Alltrack Girl
72
1 SCREW TOP
120
100
ALLTRACK
EASY ENTRY INSERT
2 SCREWS 2 SCREWS DOWN TOP
DIFFERENT TYPES OF LINERS
FULL CUSTOM T1 Dual-material padding: EPDM HARD/FLEXALON or EPDM SOFT/FLEXALON. Customisation applies only in the comfort zones, the support zones remain unchanged.
SPEED: The flex can be adjusted by removing the screw on the back of the cuff - flex 120 -> 110 - flex 100 -> 90.
102 mm ALLSPEED
A 104 mm internal last, with a wider forefoot and more room by the instep and ankle.
The boot design is structured to wrap the foot more effectively and give the boot an original personality.
9
WOMEN’S MODEL: 2 SCREWS
104 mm
SENSOR MATRIX
ALLSPEED: The shell/cuff connection gives the wearer the option of adjusting the boot’s flex by changing the position of the screws.
ALL SPEED
To ensure maximum performance, shells must be chosen to fit as closely to the foot as possible. This is why the ALLSPEED range offers 3 internal lasts based on the same construction, designed to fit as closely as possible to the foot with perfect anatomical wrap.
98
FLEX ADJUSTMENT
UNISEX MODELS: 3 SCREWS
INTERNAL LASTS
mm
2
7
GRILAMID: this Thermo-Plastic material is one of the lightest on the market and offers very good resistance. It can be used with high-density modules to reduce thicknesses. The ALLTRACK ELITE 130 LT, ALLTRACK ELITE 100 LT WOMEN, ALLTRACK PRO 120 LT models all have Grilamid shells.
SENSOR BLADE
This clearly visible asymmetric structure on the inside and outside reduces thickness while reinforcing the torsional and flexural rigidity of the shell and cuff for superior boot performance. The power axes directed towards the front allow perfect steering of the skis.
MATERIALS
WINTHERM® is a highly effective thermal insulator. Positioned at the forefoot, it comprises a sheet of micro-perforated aluminium that allows air to circulate and a polar fleece material to guarantee warmth and comfort.
12
PRE-SHAPED LINER
The stem of the liner is pre-shaped around the ankle bones to allow the liner to adapt perfectly to the shell.
73