Labmen instrument Limited Tel:00852-30623001, Fax:00852-31828558 Email: sale@lab-men.com Site: www.lab-men.com
Labmen instrument Limited Add: RM18W, 27/F,Ho King Comm CTR, 2-16 Fayuen ST,Mongkok Kowloon, Hong Kong Tel:00852-30623001 Fax:00852-31828558 Hunan branch: Room No. 918-919, Block 3, District D, Liancheng Waiking Street, Jianshe Road, Yuetang, Xiangtan, Hunan, China Tel: 86-731-52638888 86-13973220437 Email: sale@lab-men.com(sale information & quotation) info@lab-men.com (products information & visiting support) service@lab-men.com(after sale service) Site: www.lab-men.com skype: lormanled
Content 1. Moisture Analyzer..................................................................................2 2. Moisture Analyzer..................................................................................4 3. Wet Abrasion Scrub Tester.................................................................... 6 4. Wet Abrasion Scrub Tester.................................................................... 7
1
Labmen instrument Limited Tel:00852-30623001, Fax:00852-31828558 Email: sale@lab-men.com Site: www.lab-men.com
1. Moisture Analyzer
MA-100T Series Moisture Analyzer Mode
MA-100T
Range (g)
110g
Readability(g)
0.001g
Operating Temp
5℃-35℃
Pan Size
Ø 90mm
Heat Source
Halogen Lamp
Temp.Sensor
PT 100
Temp. Range
40℃-199℃
Temp.Step
1℃
Moisture Range
0.00%-100.00%
Moisture Readability
0.01%
Dry Residual Range
100.00%-0.00%
Dry Residual Readability
0.01%
Temp Setting
40℃-199℃ By 1℃ Step
Time Setting
1-99min by 10 s 2
Labmen instrument Limited Tel:00852-30623001, Fax:00852-31828558 Email: sale@lab-men.com Site: www.lab-men.com
Number Of Storage
20
Number Of History
20
Heater
220V Âą15% 50HZ 400W
Balance
Input: 220V 50HZ Output:9V
Host Dimension
360X490X350mm
The Chamber Height
22mm
Display
5 inch touch panel
Calibration
External Calibration
Interface
RS232
Use halogen moisture analyzer should attention: 1,halogen moisture analyzer is used to measure the moisture content in the sample, used for any other purpose are likely to cause harm and personal damage the instrument. 2, Please read the instructions carefully before you use it, do not use it under the environment condition which not meet the requirements. 3, halogen rapid moisture analyzer only suit for professional operate. 4, halogen rapid moisture analyzer for power for the three plug with earthing socket, banned disconnect apparatus grounding or use without a good grounding power supply. 5, Instrument around should ensure that there is enough space, so as to avoid heat accumulation and heat. 6, Please do not put flammable and explosive goods around the instrument. 7, After the test, the heating unit and the container is still very hot, so please do not touch it. 8, Toxic substances testing should be under ventilation environment
3
Labmen instrument Limited Tel:00852-30623001, Fax:00852-31828558 Email: sale@lab-men.com Site: www.lab-men.com
2. Moisture Analyzer Model: MA-100
The main parameter 1.Weight: 2000g 2.Range (g):100g 3.Readability(mg):10 4.Pan Size: Ă˜ 95mm Multi-Language Multi-Level Menu 1. The user interface supports Simplified Chinese, Traditional Chinese and English 2. Multi-level menu according to the user's habits 3.Menu is divided into equipment parameters, working mode, data query and language selection module, 4.Respectively, the parameters of the instrument and work in detail to set to meet the different needs of users 5.Six function keys according to the corresponding display to achieve a variety of different functions A variety of intelligent, convenient advanced features 4
Labmen instrument Limited Tel:00852-30623001, Fax:00852-31828558 Email: sale@lab-men.com Site: www.lab-men.com
1.A variety of operating modes 2.Real-time display of the measurement process 3.New shortcuts, so that ordinary users from a large number of settings in the liberation of the work, just a button to get the test results 4. Calibration weight error correction function to ensure the accuracy of the calibration at the same time be able to adapt to different types of weights 5.More than 200 test records can be saved and can be optimized through a quick way to query data, maintenance 6.Automatic fault diagnosis, automatic fault prompt 7.Specially designed security measures to provide over-temperature alarm, ultra-high temperature automatic power-off function The highest level of product configuration 1.New imported 16Bit ,25MHz ,MCU low-power processor 2.C3 OIML R60 certification, configuration eccentric load compensation 3.High-precision weighing sensor 4.Ultra-low noise 24Bit high-precision A / D converter circuit 5.New German import temperature sensor 6.High power halogen heating device 7. Japan imported SHARP photoelectric switch 8.Rich interface 9.The standard RS232 interface can output the measurement results to the micro-printer for instant printing or computer sampling analysis 10.Standard USB-B type interface can be connected to the computer and through the host computer system two-way communication 11. Host computer system 12.Can read, back up the instrument settings, you can also set the instrument directly 13.The instrument can be collected real-time data and automatically generate tables and graphs for easy analysis 14.Can store, query, statistical sampling of data Widely used for all walks of life 1.Suitable for water measurement in all industries, whether industrial, agricultural, educational system, or in the commercial activities. 2. You can quickly and accurately get the measurement results. Even in the more humble environment can also get rapid test results for reference 3.Test samples can be powder or particles or even liquid can be obtained in a short time test results A variety of range and accuracy to choose from 1.The maximum weighing can be selected 20g, 50g, 100g 2.Precision can choose 1mg, 5mg, 10mg 5
Labmen instrument Limited Tel:00852-30623001, Fax:00852-31828558 Email: sale@lab-men.com Site: www.lab-men.com
Moisture Analyzer MA-100 Range (g)
100g
Readability(mg)
10
Pan Size
Ă˜ 95mm
Weight
2000g
interface supports
Simplified Chinese, Traditional Chinese and English
processor
New imported 16Bit ,25MHz ,MCU low-power processor
sensor
High-precision weighing sensor
interface
RS232 interface
3. Wet Abrasion Scrub Tester Model: AST-100
Wet Abrasion Scrub Tester 1.According to ASTM D 2486 and ISO 11998. 2.Abrasion resistance is an important property for paint and coatings. 3. It’s also common for tile, flooring, furniture, wall coverings, shower stalls, and bath tubs. 4.The tester produces a repeatable, controlled condition to simulate everyday use or wear pattern. 5.With a flexible design to use brushes, sponges, abrasive pads, and sand paper to wear the 6
Labmen instrument Limited Tel:00852-30623001, Fax:00852-31828558 Email: sale@lab-men.com Site: www.lab-men.com
surface. 6.Besides abrasion testing, washability tests can also be performed. 7.Stain resistance and detergent testing are additional uses for abrasion testers. Features 1.Reciprocating linear motion at 37 cycles per minute. 2.Constant speed control over 450mm travel. 3.For wet or dry abrasion testing. 4.Preset count-down counter with automatic shut off. 5.Heavy duty drive system for low maintenance and long life. 6.Utilizes brush, sponge, abrasive pads, and sand paper. Technical Data Scrub Rate
37cpm
Stroke Length
300mm
Digital Counter
4-digit
Dimensions
580Ă—480Ă—300mm
Shipping Weight
40KGS
Comes Complete With 1)1 Abrasion Tester 2)2 Abrasive Holders 3)2 Specific Abrasives 4)100 Scrub test panels
4. Wet Abrasion Scrub Tester Model: AST-101
7
Labmen instrument Limited Tel:00852-30623001, Fax:00852-31828558 Email: sale@lab-men.com Site: www.lab-men.com
Summary: The machine has been upgraded, in line with GB / T9755-2014 "synthetic resin emulsion wall paint" the latest standards. The corresponding substrate from the cement board to black polyolefin plastic sheet The painted surface needs to be tested for scrub resistance by a brush sponge or other means. The apparatus of the scrub test produces a small range of repeating damage to the sample caused by abrasion or erosion in an in-process state to mimic daily use or wear. Examples of tests Including interior and exterior architectural coatings, wallpaper or carpets. Resistance to scrubber design by G8 / T9266-88. The device uses soap water circulation device, with a new structure of science, simple operation and so on. This tester can be measured and can be scrubbed with anti-wear performance. Using two brushes to accelerate the simulation of "wear and scratch" test, the results of good repeatability. It is used to evaluate the performance of paint scrubbing equipment. It is also possible to evaluate any film composite treated surface. Such as paint, plating, floor, cover layer, the density of wood and other forms of surface performance, the device on the standard brushing and testing the coating on the scrubber, the number of scrubber can be read directly by the counter. According to the number of scrubbing resistance, it is possible to evaluate the importance and necessity of scour resistance testing. The instrument and supporting the use of national standards, coating manufacturers and coatings research department is essential for detection equipment.
The main technical parameters: 1. connecting arm connected to two brushes for well testing 2. Brush stroke: 300mm Brush weight: 450 Âą 2g 3. Power supply: 220V. 50Hz 8
Labmen instrument Limited Tel:00852-30623001, Fax:00852-31828558 Email: sale@lab-men.com Site: www.lab-men.com
4. Brush operating frequency: 37 ± 1 times / min 5. five-digit (99999) preset counter, start the instrument automatically stops after the preset number of times 6. can be adjusted to DIN. ISO or ASTM standards for comparative testing methods, you can use the brush, scrubbing pad, sponge, cleaning cloth and so on.
Features: 1.the brush size: 38 × 90mm on the floor are uniform 60 Ø3 mouth, wear pig mane length 19mm. 2,.brush weight (including brush): 450 ± 2g. 3. brush reciprocating stroke: 300mm. 4. the brush running frequency: 37 ± 1 times / min. 5.the counter: 0-9999 6. test board size: 130 × 150 × 3mm. 7.the motor power: 90W 8.power supply: 380V 50Hz. 9,.Overall dimensions: 460 * 560 * 450 AST-101 Wet Abrasion Scrub Tester brush size
38 × 90mm
brush weight
450 ± 2g
brush reciprocating stroke
300mm
the brush running frequency
37 ± 1 times / min
the counter
0-9999
test board size
130 × 150 × 3mm
motor power
90W
power supply
380V 50Hz.
Labmen instrument Limited Add: RM18W, 27/F,Ho King Comm CTR, 2-16 Fayuen ST,Mongkok Kowloon, Hong Kong Tel:00852-30623001 Fax:00852-31828558 Hunan branch: Room No. 918-919, Block 3, District D, Liancheng Waiking Street, Jianshe Road, Yuetang, Xiangtan, Hunan, China Tel: 86-731-52638888 86-13973220437 Email: sale@lab-men.com(sale information & quotation) info@lab-men.com (products information & visiting support) service@lab-men.com(after sale service) Site: www.lab-men.com skype: lormanled 9
Labmen instrument Limited Tel:00852-30623001, Fax:00852-31828558 Email: sale@lab-men.com Site: www.lab-men.com
10