> Exterior Protection Front Protection VPLPP0060
Defender
A-Bars VPLPP0061
VPLAP0022
STC50413
VUB503760
LR003319
VUB501980
VPLPP0060 Black rubber Defender - no winch Includes spot lamp brackets VPLPP0061 Defender - with winch (genuine winch bumper only) Black rubber Includes spot lamp brackets
Discovery
VPLAP0022 Discovery 4 - up to DA999999
Moulded black rubber Includes spot lamp brackets
Freelander
STC50413 Preformed plastic & foam Freelander 1 No spot lamp brackets VUB503760 Preformed plastic & foam Freelander 1 - 2004 onwards No spot lamp brackets LR003319 Freelander 2 - with or without parking sensors Black bumper styling cover No spot lamp brackets
Range Rover
VUB501980 Range Rover Sport - 2005 - 2009
Moulded grey plastic No spot lamp brackets
IMPORTANT NOTICE Please check local legislation before fitting a frontal protection device to a vehicle that is to be used on public roads.
Dash Camera
Bumpers & Bumperettes DA1370
DA5061 Plug & play camera features 1,080 pixel resolution meaning important details such as vehicle number plates are more visible. An integrated shock sensor works together with a file locking function to ensure vital recordings are always protected against overwriting. The camera automatically starts recording, when the vehicle ignition is switched on. Older files can be automatically overwritten so recording never stops. A built-in battery provides backup power so recordings can always be completed if the power fails. Camera mode allows the unit to operate as a digital camera so should an incident occur, additional pictures can be taken. Full camera specifications can be found online at www.britpart.com/dash
DA1372
DA1369 Black DA1370 Graphite
DA1371 Black DA1372 Graphite
Lightweight Front Bumper – Race Both lightweight and high strength, the aluminium race bumper is handmade at Bowler. It uses the existing bumper mounting points and has raised ends to improve clearance. Note - Excludes spotlights shown.
Lightweight Front Bumper – Road Both lightweight and high strength, the aluminium road bumper is handmade at Bowler. It uses the existing bumper mounting points and can be fitted with standard end caps if required.
DA1371
DA1369
www.britpart.com
11