ELECTRICAL
FLUORESCENT LAMP HOLDERS D2670
D2675
D2671
D2676
D2680
T-8 Dedicated Bi-Pin Fluorescent Lamp Holder Sanp In/ Slide On w/ Lamp Lock Shunted Rated 660W - 600V D7799
®
T-8 Dedicated Bi-Pin Fluorescent Lamp Holder Snap In/ Slide On w/ Lamp Lock Rated 660W - 600V
D2681 ®
Snap-In Quick Wire Fluorescent Lamp holders Quickwire terminals are simply pushed into wire wells for positive electrical and mechanical connection • Use with 18 GA. solid or stranded or 16 GA. solid wire
®
D2670.............Slimline, Plunger End 660W - 1000V D2671...................Slimline, Rigid End 660W - 600V D2675..................Bi-Pin, Plunger End 660W - 600V D2676......................Bi-Pin, Rigid End 660W - 600V D2680........High Output, Plunger End 660W - 600V D2681............ High Output, Rigid End 660W - 600V
D7798
T-8 Bi-Pin Fluorescent Lamp Holder Tall Bottom Load Rated 660W - 600V D7990 D7991 - Shunted
Thin, Rapid-Start Quickwire Lamp Holder For T-8 & T-12 Each contact has two wire-slot terminals to accommodate all circuit requirements, including jumper connection for rapid-start circuits For 18 GA. solid or stranded wire Recess in rear for optional bracket mounting Maximum Bracket Thickness .047” Rated 660W-600V
®
Double-edge Contacts
D2690 20 GA. Slide-on Mounting Grooves
Thin, Rapid-Start Quickwire Lamp Holder for T-8 & T-12 Mounting Bracket with Screw Inserted Rated 660W-600V D3946 T-8, T-12 Bi-Pin Fluorescent Lamp Holder Snap In/ Slide On w/ Lamp Lock Shunted Rated 660W - 600V
Quickwire Push-in Terminals with More Individual Leg Action
D7797 ®
Lamp holders for U-Shaped Lamps 12” 18 GA. 105° Leads Mounting Plate is Nylon Attached to Housing Rated 660W-600V D2692.........................................................Standard
18 GA. Slide-on Mounting Grooves
Slide-On Self-Aligning Lamp holder For U-Shape Lamps Low Profile Body Self Aligning Action Completely Floats Lamp Rated 660-600V D2694.........................................................Standard D3989.......................................................... Shunted
• “Standard fluorescent lamp holders remain powered (or live) when the lamp is removed. • “Disconnect” or Circuit Interrupting fluorescent lamp holders lose power when the lamp is removed. • Internally “shunted” fluorescent lamp holders are to be used with electronic ballasts and save having to add jumper wires. 39