LACSI | Newsletter | 2010 May by LA CSI

Join us WEDNEsday, MaY 26, 2010 FDA Pacific Regional Laboratory Building, Irvine Speaker: Ted Hyman, FAIA, Partner, Zimmer Gunsul Frasca Architects LLP

Join us Wednesday, JUNE 23, 2010

The Los Angeles CHapter of the CONSTRUCTION Specifications Institute

LASCI Annual Installation Dinner at the exclusive Los Angeles landmark, The Magic Castle.

NEWSLETTER

MAY / JUNE 2010

www.LACSI.org

Content Letter FROM THE President

M AY / J U N E 2 010

My gratitude to all of the Board and members for the assistance and support you have extended to me over the past two years.

VolUME 60

NUMber 3

INLAND EMPIRE CSI CHAPTER BEGINS

The first meeting of the CSI Inland Empire Chapter was held January 14, 2010.

seminarS

Half day Stucco Seminar and a full day of Post Disaster Safety Evaluation Training.

MaY meeting and program

Join us Wednesday, March 26th FDA Pacific Regional Laboratory Building, Irvine Speaker: Ted Hyman, FAIA, Partner, Zimmer Gunsul Frasca Architects LLP

JUNE Installation Dinner

Join us Wednesday, June 23rd LASCI Annual Installation Dinner at the exclusive Los Angeles landmark, The Magic Castle.

Call for Entries Photos –Certification Classes

LEGAL NOTES: CONTRACTS

Contribute to AIA’s IGCC

Buch Notes

West Region Corner

2010 Jury of Fellows

Membership news

Curmudgeon’s Corner

LACSI would like you to submit entries for the cover photo. Contact Laura Sellmer Lsellmer@isecinc.com or Steve Taylor steve@woodinst.com

CSI Product Shows- western US 24 Ralph Liebing’s Blog

WWCOT joins DLR Group

28 2

L e t t e r F r o m T h e P r e s i de n t

Kathy Greenway, President

CSI is an organization that adds some real fun to our lives while we have the opportunity to learn and make new business connections. I encourage you to introduce your colleagues to CSI by bringing them to our monthly meetings or education events. CSI presents a relaxed environment to discuss business and get acquainted with members who may be able to assist you on products and projects.

My tenure as President has come to an end and I must say it has been a very fulfilling experience. (and even a little nail biting at times!) Friendships have deepened and expanded. My gratitude to all of the Board and members for the assistance and support you I encourage you to find a have extended to me. committee that interests The CSI Convention in you. I will guarantee your Philadelphia is May 11-14th. The journey has been fun, commitment will lead including a tremendous to involvement when June will be our Installation learning curve! Every you feel the support and and Award Dinner. Patrick month our Chapter Board respect from others. Comberford will become and Committee members Remember, any time your next president. demonstrate their and energy you provide, strength, involvement and will help the committee commitment to provide reach the finish line. It will be a great the benefits we all participate in from personal feeling to know to know that chapter meetings to educational events. part of your support is the reason the Your Board of Directors is the engine that LA Chapter continues its strength and maintains the health of your chapter. growth. Some days I felt like the little red engine The end of March our Certification going up the big mountain saying, “I classes finished with the Mock Exams think I can. I think I can. ” And I used our and the A201 review. Thanks to all or member resource to get the steam back instructors who dedicated their Saturdays in my engine and roll down the other side. from January thru March to help prepare It has been great knowing the fuel for our the students for the exams. My personal chapter is with our Board and members.

M A Y / JUNE 2 0 1 0

quest to slot the class and study time, while overcoming the fear of failing, made me realize that no matter, pass or fail, I learned. That is what CSI is all about. We have great opportunities to broaden our knowledge. The CSI Convention in Philadelphia is May 11-14th. If you are an attendee or exhibiting please notify Craig Mount. Wednesday night we will have our group dinner and would enjoy having you join us.

June will be our Installation and Award Dinner and I encourage all of you to participate. Patrick Comberford will become your next President, and I know he will appreciate your support as well as our other newly elected and term Directors. Please keep your eyes open for the date and location! Thank you for your support the last two years. To the Board and Committee members…. I am in “awe” with the dedication and time you squeeze out of your work and personal schedules. The achievements of the Chapter would not be possible with out all of you. Know that your time and efforts are touching and inspiring others. I am very proud of our chapter and look forward to assisting in the upcoming years. — Kathy Greenway, CSI, CFM 3

INLAND EMPIRE CHAPTER

N E W C SI C HA P T E R Inland Empire CSI is West Region’s #147 In these economic times CSI is still the answer

M A Y / JUNE 2 0 1 0

(P). CSI Director, Duane Johnson, FCSI, and West Region Director Dave Willis, CSI were also present. The new chapter board members include:

Riverside CA – The birth of a new CSI chapter – Inland Empire CSI (#147), drew a full house of 88 members and well wishers to celebrate the inaugural dinner meeting to Riverside CA on January 14, 2010. The new chapter boasts 13 Professionals and 9 Industry members. Most of them work in the BakersfieldOntario-Rancho Cucamonga area. It is located East of Los Angeles in Southern California. The evening began with a social hour. Members of Southern California’s Producers Council came out in force with 24 table-tops. There were 5 architects/ project managers who came to Riverside from the high desert (Victorville), and several more drove up from Murietta. All major architectural firms in the area were represented at the event as well as representatives from the four neighboring CSI chapters– Los Angeles, Orange County, San Diego and Fresno. Greg McAloney, CSI, presented a $1,000 check to the new chapter as seed money on behalf of Producers Council of Southern California. Two of the area’s largest architectural firms offered their facilities for future chapter meetings. Inland Counties AIA was represented by Executive Director Florence Hagstrom, President James Horecka, AIA, and President- elect Dennis Tanida, AIA. Plans are in the works for some joint events in the future.

ÐÐ Vice President - Earnest Lauria, CSI (I) ÐÐ Secretary - Kay Melcher, CSI (P) ÐÐ Treasurer – Donald Zanrosso, CSI (P)

ÐÐ Directors – Joe Salazar, CSI (P) ÐÐ Kathie Fountain, CSI (I) ÐÐ Charles DiGangi CSI, (P)

Chapter Advisors – Janet Piccola, FCSI (I) and Valerie Harris, FCSI (I). Chapter Chairpersons include: Membership – Jennie Guida, CSI (I); Programs – Janet Piccola, FCSI (I); Certification- Education-Technical – Kay Melcher, CSI (P). Efforts to organize a chapter in this area began during the presidency of Robert Molseed, FCSI, who made an analysis of the US Census to pinpointed this area ripe for a new chapter in 1992. It finally came to fruition when members within the area decided it was time for a home chapter. This new chapter has the enthusiastic support of nearby Southern California chapters like Los Angeles, Orange County, San Diego and Fresno. Congratulatory messages to the new chapter may be sent to Chapter Secretary Kay Melcher, CSI, CCS, LEED AP kay.melcher@stvinc.com

Story contributors include: Jan Piccola, FCSI, Sheryl Dodd-Hansen,FCSI, and Kathy Greenway, CSI

CSI Secretary Sheryl Dodd-Hansen, FCSI, presented the chapter charter to new Chapter President John Melcher 4

P HOTOS – C E RTI F I C ATION C L ASS E S

M A Y / JUNE 2 0 1 0

CDT Class Back Row: David Karina, Kurt Schwarm, Jay Nordsten Front Row: Nora Amin, Say-Vun Khov

Joe Back is the instructor

Every Saturday morning for 9

Richard Peralta, Tan Diep, Valarie Harris

Dean Vlahos, Andrew Wilson, and Mike Fuller

Kurt Schwarm, Mitch Lawrence, Charles DiGangi

weeks, LACSI members took advantage of Certification Classes in preparation for the four CSI Certification Exams. Thank you to the LACSI Education Committee for bringing together a team of experts trainers.

Kurt Schwarm, CCS Instructor, Min Shuai, Mitch Lawrence, Charles DiGangi

Instructor: Kurt Schwarm 5

C E RTI F I C ATION C L ASS E S P HOTOS

Tan Diep, Richard Peralta, Neal Drell, Valarie Harris

Kelly Ingalls has the CDT class hard at work.

M A Y / JUNE 2 0 1 0

The CCA class– Front Row: Say-Vun Khov, Nora Amin, David Karina. Back Row: William Schmalz, Jay Nordsten

THANK YOU to Eric Loyd, Jay Nordsten, Dean Vlahos and DLR-WWCOT for making this education opportunity possible.

CCS class with Kathryn Marek

The man in charge: Erik Loyd CCS with Kathryn Marek

CCS at work

CDT Class with Eric Loyd

CCS Class with Dean Vlahos 6

HA L F D AY S E M INAR

M A Y / JUNE 2 0 1 0

Detailing & Specifying Problem Free Stucco Date: Saturday, June 5, 2010 Time: 8:30 AM to Noon Location: Westwood Building Materials 15708 Inglewood Blvd., Lawndale, CA 90160 (3 AIA, CEUs)

Your lab project has a lot of complex requirements You need an experienced partner to provide the right details.

LACSI is hosting a half day seminar on exterior lath and plaster design, “Stucco 101”. The presentations will be made by Mr. Michael Logue, Director of the Technical Services Information Bureau, (TSIB) of the Western Walls and Ceilings Contractors Association. Stucco has been used successfully as an exterior envelope material for hundreds of years. However, the material does have limitations, (it is brittle and absorbs water), and understanding how to detail for these is critical to a problem free installation. The program will cover topics such as framing, metal lath and crack control joints, proper detailing of weather resistant barriers, trims and accessories, and effective curing methods.

The second part of the seminar will concentrate on the impacts of the new State Energy Code on exterior stucco wall design. The third section of the seminar will be presented by Mr. Vince Overmyer, Vice President of Merlex Stucco. He will present new polymer modified additives for crack control and improved water management in stucco walls.

For further information on your lab project , visit www.isecinc.com, email SCRMktg@isecinc.com or call 714.761.5151. architectural woodwork l laboratory furniture l laboratory & medical equipment general trades l ornamental metals l specialties l doors, frames & hardware

Jerry L. Pozo, BS ,CSI, CDT Architectural/Technical Consultant

Cell: 408.595.2031 Phone/Fax: 530.885.6828 E: jpozo@bmi-products.com www.bmi-products.com

BMI Products of Northern California, Inc. 990 Ames Avenue Milpitas, CA 95035-6303 Tel: 408.293.4008 Fax: 408.293.4103

¤ Stucco ¤ 690 Plaster ¤ Tile Mortar ¤ Masonry Mortar ¤ Acrylic Finishes

2 010 E D U C ATION C O M M ITT E E

w w w . lacsi . o rg

California Office Of Emergency Services (OES) Post-Disaster Safety Assessment Program (SAP) Evaluator Training Saturday, MAY 8, 2010 / 9am- 5pm Provides 7.0 HSW Continuing Education Learning Units to AlA Members INTRODUCTION Disasters create terrible consequences, forcing people out of their homes into temporary shelters and closing down communities. While productive individuals sit idle in shelters, or even move away, local building inspectors struggle to evaluate building safety in hundreds or thousands of damaged structures. Most building departments do not have the ability to perform multitudes of such inspections in a short period of time, so a strong need exists to have a cadre of trained professionals available to assist local governments, along with a program to manage this cadre. The goal of the California Office of Emergency Services (CA DES) Safety Assessment Program (SAP) is to help local government perform accurate facility safety assessments as quickly as possible. This will allow people to use safe homes and businesses, and ensure that people are prohibited from entering unsafe structures after a disaster. SAP Evaluators survey damaged facilities to determine if there are safety hazards to building occupants or to the general public. SAP Evaluators also provide recommended posting of placards that denote the condition of each structure evaluated.

COURSE DESCRIPTION This full -day Evaluator Training class trains civil engineers, architects, and building inspectors to do field evaluations of buildings and other infrastructure for safety. It includes the most currently updated curriculum prepared by the Governor’s Office of Emergency Services (DES), practical examples of post-disaster field conditions impacting structural safety, assessing the degree of severity, posting, and barricading procedures.

QUALIFIED PARTICIPANTS (see important note below) will receive the Disaster Service Worker Emergency Response Team card. Possession of this card is required in order to participate in emergency CALBO call -out operations (photos of each participant will be taken and a loyalty oath are port of the in-class registration process).

REQUIRED READING There is no required reading prior to the class. An SAP Training Manual, ATC20 & ATC-45 Handbooks will be provided at the class.

INSTRUCTORS Dean Vlahos, FAIA, NCARB, CCCA, LEED® AP / Frank Bostrom AIA, CSI Dean Vlahos, FAIA is a Partner/Architect and Director of Architectural Forensics for DRL Group WWCOT Architects, a full-spectrum architecture firm with offices in Chicago, Colorado Springs, Denver, Des Moines, Honolulu, Shanghai, China, Kansas City, Lincoln, Minneapolis, Omaha, Philadelphia, Phoenix, Portland, Seattle, Sacramento, Santa Monica, Riverside, Moorpark, and Palm Springs. Dean specializes in construction technology, industry interrelationships, and construction defect investigation and analysis. Over the last 30 years, he has successfully completed a wide range of building types including: hospitals, schools, auditoriums, commercial, justice, laboratory, correctional, single and multiple family facilities totaling over nine million square feet of building program space, at an approximate construction value in excess of $9 billion. Dean has participated in numerous speaking engagements and authored and co-authored more than 10 architectural publications. He stays abreast of current standards and codes by actively participating in continuing education construction and architecture courses and seminars.

Continued on page 9  8

2 010 E D U C ATION C O M M ITT E E

w w w . lacsi . o rg

 Continued from page 8

OES / SAP TRAINING CLASS– ONE DAY PREPARATION COURSE FOR SAP / ATC-20 & ATC-45 Date: Saturday, MAY 8, 2010 Location: USC – Capital Construction Development, CDF Building, 3434 S. Grand Avenue – Los Angeles, CA 90089 PARKING: Free – on site / street / or self-parking in parking garage on site.

8:00- 8:20 am

REGISTRATION + COFFEE and PASTRIES.

8:20- 8:30 am

WELCOMING REMARKS: Frank Bostrom AIA CSI. LECTURER: Mr. Dean Vlahos, FAIA, CSI, CCCA, LEED®AP. Principal /Forensic Architect and Director of Architectural Forensics at DLR GroupWWCOT

9:00 am

UNIT 1: SAFETY ASSESSMENT PROGAM

11:00 am

UNIT 3: BUILDING EVALUATION.

Manufactured Homes, Historic Structures, other issues. 11:30 am

UNIT 4: LIFELINE SYSTEMS and FACILTIES.

Geotechnical review, transportation systems, water and wastewater systems.

OVERVIEW.

Noon

LUNCH - REFRESHMENT BREAK

SEMS, credentials, immunity, workers comp, ID badges, activation responsibilities.

1:00 pm

UNIT 3: BUILDING EVALUATION.

2:30 pm

UNIT 5: OTHER HAZARDS.

10:00 am

REFRESHMENT BREAK

10:15 am

UNIT 2: SAFETY ASSESSMENT PROCESS and

PROCEDURES.

Exercise.

High winds, floods, fires, explosions. 3:00 pm

SAFETY Field safety, Critical Incident Stress disorder, hazardous materials, USAR marking system, go-kit, job aid.

Effects of earthquakes, windstorms, floods, and explosions; placards, evaluation forms, procedures and guidance. 5:00 pm

END OF CLASS (Approx.) Continued on page 10  9

2 010 E D U C ATION C O M M ITT E E

w w w . lacsi . o rg

 Continued from page 9

OES / SAP TRAINING CLASS– ONE DAY PREPARATION COURSE FOR SAP / ATC-20 & ATC-45

ADVANCE REGISTRATION FORM

PRE-REGISTRATION REQUIRED by May 5, 2010 ÐÐ SPACE IS LIMITED TO: 60 PARTICIPANTS ÐÐ REGISTER ON LINE AT: www. lacsi.org CLICK HERE to register online. REGISTER BY CHECK Payable to: LACSI Mail to: 205 Avenue I–Suite 6 Redondo Beach, CA 90277-5619 Provide your AIA Number / CSI Number LEGIBLY at the time of registration to receive Continuing Education Credits. REGISTRATION CATEGORY: AIA/LA and AIA LB/SB / LACSI / OCCSI / ACIA ÐÐ MEMBERS: $135 ÐÐ NON-MEMBER: $175

NAME �� AMOUNT ENCLOSED �� ADDRESS �� CITY/STATE/ZIP �� TELEPHONE ��

7 AIA HSW CONT. ED. CREDITS.

FAX ��

LACSI is a member of USGBC.

EMAIL ��

IMPORTANT NOTE ABOUT THIS CLASS: To receive the Disaster Service Worker Emergency Response card, individuals must be a certified licensed Architect, Engineer, Building Official, Building Code Official, Master Code Official, Building Inspector, Combination Inspector, Residential Building Inspector, Residential Combination Inspector, Building Plans Examiner, or Combination Plans Examiner.

AIA NUMBER �� CSI NUMBER ��

‘USGBC’ and related logo is a trademark owned by the U.S. Green Building Council and is used by permission.

L E GA L NOT E S

MMAARYC / H JUNE / APRIL 2 021001 0

California Supreme Court Changes Construction Contracts By Michelle L. Gamble Many of you deal with indemnity provisions in contracts on a regular basis. Indemnity provisions are complicated and should be approached as a minefield of potential hazards. In July of 2008, the California Supreme Court made things even more dangerous in a case titled Crawford v. Weather Shield MFG, Inc. In Crawford, the Court found a subcontractor responsible for a developer’s defense costs based on the language of its contract, despite the fact that the subcontractor was not negligent in its performance on the project. Although the case dealt with a subcontractor and developer, their decision was a troubling development for architects, who will need to be more cautious about entering into any contract with an indemnity clause or a “duty to defend” clause. To best explain the import of the Crawford decision, imagine Owner (“O”) and Architect (“A”) have a contract in which A agrees to “defend and indemnify” O from the claims of a third party. A now has a “duty to defend” O in a lawsuit. A also has a “duty to indemnify” O from an award of damages. In contract law, “defense” and “indemnity” are each terms of art. When you agree to “defend” another party, you agree to assume their

litigation expenses, including attorney’s fees and other costs of suit. By agreeing to “indemnify”, you agree to protect that party from any liability that results from a third-party action, and you will assume responsibility for paying the settlement or adverse judgment. The parties can draft the indemnity and defense provisions narrowly or broadly. This can include conditioning indemnity on a finding of negligence, or otherwise create limitations or exclusions to indemnity liability. Until the Crawford case, it was not uncommon to treat the two duties as one—to assume that the duty to indemnify also included the cost of defense. If there was no right to indemnity, then there was no right to a defense. But the Crawford court held a subcontractor liable for the developer’s attorney fees and defense costs from the outset, even though that subcontractor did nothing wrong. Why? The indemnity provision in Crawford by its terms created two distinct obligations. The court concluded that the subcontractor’s obligation to defend was a separate obligation from its duty to indemnify. So, as drafted, the contract obligated the subcontractor to defend the developer, even though it was not obligated to indemnify the developer.

As a result of its poorly-worded contract, the non-negligent subcontractor in Crawford was found liable for $130,000—the developer’s costs of defense. To limit your exposure, it is critical that you pay close attention to the language of your contracts. One way is to ensure that your obligation “to defend” the other party is expressly conditioned on a finding of negligence or fault on your part giving rise to your obligation to indemnify. Given the often complex nature of this area of law, coupled with the impact of this Court decision, you may want to consult your attorney to review any defense and indemnity provisions to see that your interests are protected. Michele L. Gamble is a Partner and Patrick Craig is an Associate with Collins, Collins, Muir & Stewart, LLP and are located in firm’s Orange County office (www.ccmslaw.com). Ms. Gamble and Mr. Craig represent design professionals in all aspects of their professional practice including mediation, arbitration, trials, appeals, contract review and negotiation. Ms. Gamble’s email address is: mgamble@ ccmslaw.com; Mr. Craig’s email address is: pcraig@ccmslaw.com. Nothing contained within this article should be considered the rendering of legal advice. Anyone that reads this article should always consult with an attorney of their choice before acting on anything contained in this or any other article on legal matters as facts and circumstances will vary from case to case.

AIA New s

M A Y / JUNE 2 0 1 0

Invitation: Contribute to the AIA’s Credible Voice on the IgCC March 18, 2010

On June 29, 2009, the American Institute of Architects(AIA), along with the International Code Council (ICC) and ASTM International, announced the formation of the Sustainable Building Technology Committee (SBTC) and charged it with creating an International Green Construction Code (IGCC). Since then, an enormous amount of time and effort on the part of the members and staff of all three organizations, as well as a broad range of stakeholder participants, resulted in the development of a draft IGCC. For its part, you can be proud of those who represented the profession’s interest in this endeavor. In every chapter and on every page, their presence and their influence can be seen. The AIA’s participation assured that architects had, and will continue to have, a role in shaping a significant portion of the overall building code development effort – an effort that will prove to shape so much of what, and how, we design. We announce to you the release of Public Version 1.0 of the IGCC, which is now

available for public comment. While this milestone brings us one step closer to completion, we cannot realize this goal without your participation. The IGCC is vital to safeguard the health, safety and welfare of the natural and built environments. It is equally critical to ensure that economic and regulatory implications to our profession are not negatively affected. As architects, it rightly falls to us to meet the challenge, become involved, and help define the final version of the code. To that end, the AIA has developed a web form at www.aia.org/igcc where you can review and submit comments on Public Version 1.0 of the IGCC (and subsequent versions). Your participation is vital to our success, so please take advantage of this opportunity. Thank you in advance for your valued assistance. With best regards, George H. Miller, FAIA President Christine W. McEntee Executive Vice President/CEO 12

U P C O M ING E V E NT

M A Y / JUNE 2 0 1 0 Wednesday, MaY 26, 2010

L A C SI M AY P r o g r a m FDA Pacific Regional Laboratory Building, Irvine Our Speaker Ted Hyman, FAIA, Partner, Zimmer Gunsul Frasca Architects LLP Our Program FDA at Irvine culminates the agencyâ&#x20AC;&#x2122;s strategic plan to consolidate its aging analytical laboratories into a new facility. A spectacular site was chosen adjacent to the environmentally sensitive, marshy wetland of upper Newport Bay in Irvine.

5:30 to 6:30 pm, Technical Workshop 6:00 pm, Social 7:00 pm, Dinner 7:45 pm, After Dinner Program Reservations Reservations required before 4:00, Fri., May 24. Call 213-243-6658

Please leave your name, company name and phone number or reserve at www.lacsi.org Cost LACSI MEMBERS With advance reservations: FREE Without reservations: $10

The presentation will focus on the design of this award-winning building, characterized by its striking use of architectural quality cast-in-place concrete and a broad expanse of fritted glass curtain wall.

NON MEMBERS With reservations: $50 Without reservations: $60

The exterior is complimented by perforated copper screens and a standing seam copper roof. This impressive exterior wraps an elegantly detailed interior highlighted by the careful use of wood paneling, casework, architectural concrete, and stonework in the public spaces adjacent to the more functional laboratory spaces.

Location

A two story circulation spine is conceived as an internal street, in the California tradition of uniting indoors and outdoors. Through its openness, the building reveals the intent of the FDA to build a newly integrated work culture.

Parking

Dorothy Chandler Pavilion

5th Floor Banquet Room 135 N Grand Ave., Los Angeles, CA Enter the garage from Grand Ave. Tell the attendant you are with LACSI. Parking is free if you arrive after 4pm. Enter the elevator lobby on the Grand Ave. side of the building at street level. Take the elevator to the 5th floor. PRogram Chairman Ed Buch, CSI, CCS, AIA 13

U P C O M ING P ROGRA M

LACSI JUNE INSTALLATION DINNER The Magic Castle Awaits You This year the LASCI Annual Installation of the Board will be held at the exclusive Los Angeles landmark, The Magic Castle. Food Selection

Sponsorships

4:00 to5:00 pm, Social 5:00 to 6:00 pm, Award Presentation and Installation 6:00 to 7:30 pm, Dinner 7:30 pm, Theater- Magic Show After our event, you are welcome to wander the castle and take in all the shows for the rest of the evening. Cost

ÐÐ Roasted Prime Rib ÐÐ Scottish Salmon

Wednesday, JUNE 23, 2010

ÐÐ Free Range Garlic Chicken ÐÐ Pasta Primavera

$70 per person with advance reservations. Valet parking included. Reservations

Sponsorships available for $50 – Provides Company name on invitations, reservation website and welcoming posters at the Castle.

Reservations required before 4:00, Monday, June 21.

Dress attire

Contact Kathy Greenway for questions at kgreenway@draperinc.com, or 714 396 9732.

Men jacket and tie. Women must be in a dress, cocktail dress, elegant skirt and blouse combination, or evening pant suit ensemble.

Please leave your name, company name and phone number or make your dinner reservations and food selection at www.lacsi.org Location The Magic Castle

7001 Franklin Ave. Hollywood, CA 90028 Directions One block north of Hollywood Boulevard, between LaBrea and Highland. The closest freeway is the Hollywood Freeway (101). Parking at the Magic Castle is provided by a valet service. Reserve early, this event will fill up and space is limited.

A Splintered History of Wood, Belt-Sander Races, Blind Woodworkers and Baseball Bats historical facts related to wood such as the matter of “strategic timber” in the 17th and 18th Centuries. An example of “A Splintered this is the straight and tall timber that was Ed Buch History of Wood, essential to seafaring nations for masts on Belt-Sander Races, Blind Woodworkers their sailing ships. Maine, in the Colonies & Baseball Bats” by Spike Carlsen may was known for its especially straight and sound like the title for a book of casual tall trees which England imported in vast reading rather than one quantities for its ships. for technical content, This is perhaps one and you’d be correct. reason why England Even the Empire State However, in addition fought so hard to keep Building in New York City, to some of its almost the Colonies. built in 1932, and more “Ripley’s Believe It or recently the Louisiana The broad range Not” kinds of topics, Superdome in New of wood species is it contains useful and Orleans are supported on described in detail. entertaining chapters timber piling. From the tropical iron with historical and woods weighing nearly otherwise interesting 93 lbs/CU FT, to balsa information you didn’t wood, and bamboo (not a true wood), to realize you need to know. It will be Cuban Mahogany costing nearly $200/ appreciated by anyone who works with, or board FT, and everything in between. uses wood in any way. Oak is heralded as the champion of all It seems as though there isn’t a wood the woods. Its combination of strength, related topic that isn’t included. From density, workability, and the beauty of its the mundane, like toothpicks; to the grain make it a favorite of woodworkers, essential, like the Louisville Slugger; to the cabinet makers, and ship wrights. Beyond musical, like the Steinway Grand and the these attributes it was an essential food Stradivarius violin; to the archaic wooden source for Native Americans through its water piping and wooden railroad rails, bountiful production of acorns. And there to the comical belt sander drag races of can be no argument on the beauty of live Tyrol Basin, Wisconsin, Carlsen touches oaks that dot the California landscape on them all. He also includes fascinating whether you are a woodworker or not.

The first precursor to trees appeared about 450 million years ago. By 370 million years ago, these plants had developed a vascular system in the trunk connecting the roots and the foliage. As water evaporates from the leaves, water is pulled up from the roots via cohesion between water molecules passing through cells in the trunk. This was the beginning of what was to become a photosynthesis machine. Trees evolved into two groups: hardwood and softwood. The former characterized by enclosed seeds and the later by exposed seeds. Trees can also be characterized by where they grow: rain forest trees are mostly hardwoods like ipe and mahogany and since they grow continuously, they don’t exhibit growth rings; seasonal/ monsoonal trees produce some of the densest and most beautiful woods such as ebony and rosewood; the temperate climates of Europe and North America produce an abundance of oaks, maples, pines, and firs to name a few. Continued on page 16  15

L uchnotes b

M A Y / JUNE 2 0 1 0

 Continued from page 15 All wood consists of cellulose cells held together by lignin. The cells that carry water are called the xylem and those that carry food, the sap, are called the phloem. The amount of lignin binding the cells together determines the strength, hardness, and flexibility of the wood. Both xylem and phloem cells are produced in the cambium zone, the slippery layer just beneath the bark. The various applications of wood in construction are presented starting with log cabin buildings. By the early 1800s, when steam replaced water wheels as the source of power for saw mills, the expansion of lumber as a building material began in earnest. This was accompanied by the advent of machine made, mass produced nails. By 1830 balloon framing arrived, replacing timber post and beam construction. Balloon framing took advantage of the more economical small dimension lumber fastened together with mass produced nails. By the 1940s the balloon framing was replaced by platform framing, an even faster and more economical method for framing upper stories.

Nowadays, we don’t associate wood with large scale commercial or institutional construction. But until steel and concrete framed construction became common in the early 20th Century, wood was used extensively for floor and roof framing, often in combination with masonry bearing walls. Large 19th Century buildings were commonly founded on wood pilings. Even the Empire State Building in New York City, built in 1932, and more recently the Louisiana Superdome in New Orleans are supported on timber piling. “A Splintered History of Wood” was published by Harper Perennial in 2008. The book has 411 pages, some with photographs but all written with good humor.

W e s t ReL g i o n C o r n e r

It’s that time again David A Willis, West Region Vice President

M A Y / JUNE 2 0 1 0 For those of you that are sometime skeptical about designing with structural concrete masonry, you might want to take a look. There are some great tips on specifying concrete masonry, mortars and grouts. The author, Diane Throop, is the International Masonry Institute’s director of engineering with 30 years of experience in engineering and construction, mostly in masonry. She can be reached at dthoorp@ imiweb.org.

It is that time again for me to do my best As co-chair for the upcoming West to pass on a few things, because as you Region Conference at the Tenaya Lodge know, I am a man of few words. It is at Yosemite, I can tell you that the my sincerest wish that the new year has committee is on schedule brought some prosperity to with conference planning. you all. This economy has We have been notified that had so many bumps in the I want to rain or shine, the Friday road, it is time to straighten thank all those Dinner and Logger train it out. who voted. ride will take place. The I hope that you all have Chapter challenge will prove exercised you right to vote in to be an interesting test of the current CSI elections. You navigation, and building will probably not read this until after the skill. I’m not going to tell you what it is. election deadline, but it is my hope that You’ll just have to show up to find you made you favorite choices for the next out. few years. I want to thank all those who You might read this prior to the voted for myself as well as all the other Mid Year meeting in Oakland. I well qualified members on the ballot. hope you have sent you wishes and I finally had a little time to look through concerns along with your chapter some of my past Construction Specifier representative. We will again be Magazines. In the October issue of fighting the budget. I believe that 2009, I found a subject close to my Eric will get this posted to the WR heart, “Structural Masonry Done Right”. Website prior to the meeting.

I am planning to visit three more Chapters at their dinner meetings prior to the new CSI year including Redwood Empire, San Francisco, and East Bay Oakland. I will attending the Santa Clara Valley Chapters 50th anniversary on March 20. Congratulations to all the SCV chapter members. There is going to be a special meeting in Reno on March 4 just prior to the Mid Year meeting. This will be a speak out meeting to discuss future programming and ideas. I am hoping all Reno members will be able to attend. Duane Johnson plans to be there to add his support as I would like to do, but I have a conflict that can’t be changed. I wish you all a prosperous spring and hope to see you soon at a chapter meeting or the Conference in the fall. Very Sincerely, David A. Willis, VP West Region

2 010 J u r y o f F ell o w s - 6 CSIs, + 6 FCSIs

Six CSI members were recently selected to Fellowship by the 2010 Jury of Fellows. The investitures will be held at the Gala, part of the CONSTRUCT2010 Show and the CSI Annual Convention in Philadelphia on Friday, May 14. The actual citation for each Fellowelect will be kept confidential until the ceremony. CSI Secretary Sheryl DoddHansen, FCSI, CCS, CCCA, had the duty to inform all participants. Below are the initial reactions from this year’s class of 6 new Fellows. Loren Berry AIA, CSI, CDT “Loren, Sheryl Dodd Hansen is on line two”… I knew right away what the call was probably about; I just didn’t know whether it was to tell me that I would need to try again another year or that it would be good news. Sheryl’s voice was happy and upbeat; you know the way she usually sounds. “Hello Loren”…I knew then that it was good news.

My mother had passed away on January 3rd and my submittal was not in to the Jury yet at that time; I didn’t really think much about Fellowship for several days, but decided I would get the final editing done and complete the process for my mom. ‘Thanks for your help mom’, I thought, as Sheryl gave me the good news.“ Loren is Principal in the firm Berry Architects, PC, located in Eugene, Oregon. In FY 08-09, he was appointed to serve out a vacancy as NW Region Director. He will also serve a full (2-years) term as Director, beginning in July. Loren was nominated by the Willamette Valley (Eugene) Chapter CSI, and his submission was chaired by Paul Edlund, FCSI, Distinguished Member.

Kevin D. Corkern RA, CSI, CCS, CCCA, LEED_AP, NCARB “When Sheryl DoddHansen called me she started the conversation with ‘I am calling about your Fellowship Nomination’ I was worried that I had not been selected, but when she told me I would be elevated to Fellow, I was excited and honored.

M A Y / JUNE 2 0 1 0

I went to talk to my business partner Tom Parshall. This has been a tough business year and we had been discussing whether or not we would be able to budget for the Institute Convention this year. I told him, ‘The decision has been made; I’m going to Philadelphia this year where I’ll be elevated to Fellowship’. We’re hoping he’ll be able to attend too.” Kevin is partner in TLP Architects, LLC, in Nashville, Tennessee and a former Gulf States Region Director (FY06-08). He is an incoming member of the CSI Finance Committee. His nomination is by the Nashville Chapter and his submission was chaired by Troy A. Williams, CSI, CDT.

John “Grif” A. Griffith, CS “I was totally humbled that I had been elevated to Fellowship. This is a great honor. I became involved with CSI because I wanted to see my wife at least once a month at the chapter meetings. Seriously, I wanted to help the construction industry in any way possible because it has given me so many rewards. I never expected to get this involved with CSI when I first joined in 1983.” John is married to Alana Griffith, FCSI and former

Continued on page 19  18

2 010 J u r y o f fell o w s  Continued from page 18 CSI President. He is currently a Director representing the NC Region CSI. He has been in the glass and glazing industry as long as he can remember. Since joining CSI, Empirehouse, Inc - Glazing Specialty Contractor, the family business has grown by leaps and bounds and he contributes this success to having the opportunity to work every day with his wife, sister, 2 nephews, niece, and son. “We are looking toward the future of glass in construction and the next generation of CSI.” His nomination was by the Minneapolis/ St. Paul Chapter (NC Region) CSI’ and his submission was chaired by Paula Nyquist, CSI, CDT.

José A. Guaty, CSI, CDT “Like many before me, I received the dreadful phone call in 2009 informing me I had not made the cut, but was encouraged by the chair of the Jury of Fellows to resubmit again in 2010. When Sheryl called me, I was so nervous it felt like those days back in high school waiting for those final exam test scores. I was delighted to hear those words “Congratulations you made it”; I rambled on and on to Sheryl for twenty minutes, nerves chatter I guess. I’m humbled by this honor. ”

Jose is the owner of a small Specialty Construction firm in South Florida that specializes in flexible space division and sound control products. He emigrated from Cuba when he was 7 years old. He attended schools and worked in many jobs starting in the airlinehospitality industry. This introduced him to the construction industry where he learned about proper documentations, and good communication. So inspired by his bosses and mentors, he has dedicated his career to enhancing the construction process by maximizing the efficiency of the construction team through proper use of construction documents and documentation. José served as Director representing the SE Region CSI in FY 07-09. He was nominated by the Ft. Lauderdale Chapter (SE Region) CSI and his submittal was chaired by Abbas Zackria, CSI, CDT.

Bob Mosblech, CTC, CSI Editor’s note: we regret not being able to reach Bob Mosblech. Attempts were made to reach Bob before the printing deadline. Bob was nominated by the San Francisco Chapter (W Region) CSI and his submittal was chaired by James O’Keefe.

M A Y / JUNE 2 0 1 0

Gerard Reed, CSI, CCPR “When I was notified that I had been selected by the Jury of Fellows I was very gratified that they had recognized and appreciated my efforts on the behalf of CSI. I thought of my mentors who are already Fellows and was proud to be considered among them. Then I thought of the many dedicated members throughout CSI that may not have the title Fellow, but make CSI what it is. Thank you.” Jerry is an Independent Manufacturers’ Representative in Michigan promoting Division 4 and 7 products in the Great Lakes area. The Detroit Chapter (GL Region) CSI nominated him and his submittal was chaired by Gerald Marquette. The 2010 Jury of Fellows consists of 3 Fellows and 3 non-Fellows. They are, with their (region representation) Richard C. Robinson – Chairman, FCSI, CCS, CCCA, AIA (SC) Gary L. Beimers, FCSI, CDT (GL) Bob Kenworthy, FCSI, CCS, CCCA (NW) Catherine D. Guglielmoni, CSI, CCCA (W) Nancy M. Kabza, CSI, AIA, USGBC, SCIP (SE) John M. Tomaszewski, CSI, AIA (MA) 19

M em b e r s h i p n ew s

M A Y / JUNE 2 0 1 0

NEW Members

Member Recognition

Welcome to all these new members! We look forward to meeting you at chapter activities:

Congratulations to all these members who joined in May or June and have maintained continuous membership.

Dino Casillas. . . . . . Sales Manager Great Western Building Materials Mark Emfinger . . . . STO Division Manager Great Western Building Materials Shaun Radcliffe. . . . Branch Manager

Great Western Building Materials

Nathan Ponder. . . . Director of Sales

Cyber Copy, Inc.

54 Years Ago (and our most senior member) ÐÐ Robert Meyerhof, Member Emeritus

Rafael Rivero. . . . . . CPI Daylighting Susan Foster. . . . . . Architectural Sales + National Accts. Mgr.– Parex USA Kathy Varney. . . . . . Regional Publisher/Sales Director– McGraw-Hill Construction Sherilyn Hopkins . . Owner– Westport Innovations Abe Judah. . . . . . . . Opal Surfaces James Lisa. . . . . . . . The Sherwin Williams Company Sanjay Mishra. . . . . California State University, Dominguez Hills Patrick Howard. . . . The Howard Company, LLC

51 Years Ago : ÐÐ Gayle Pace, Heffernan Insurance Brokers

More than 40 Years Ago: ÐÐ Lorne Bell Jr., Woodwork Institute ÐÐ Charles Denisac Jr.

More than 30 Years Ago:

Fred Diamond. . . . . Director, Rowland Unified School District

ÐÐ Max William Pierce

Jamie Robison. . . . . Educational Services Coordinator, Southwest Carpenters Training Fund

ÐÐ Joe R. Back, University of California ÐÐ Ian Hendry, Western Wall & Ceiling Contractor

Membership Committee News

Need a membership badge?

Valerie Harris and George Balteria

Many thanks to Vince Overmyer and Melissa Higgins of Merlex who are taking on the challenge of ordering badges. If you ordered a badge, please check at the registration table at CSI Night or a the next monthly membership meeting. To order a new badge contact valarieh@pacbell.net

20 Years Ago: ÐÐ Nathan Battle

10 Years Ago: ÐÐ Scott Ferguson, Dunn Edwards

5 Years Ago: ÐÐ Ronald Brown, Metropolitan Water District ÐÐ Kay Melcher, STV Inc. Continued on page 21  20

M em b e r s h i p n ew s

M A Y / JUNE 2 0 1 0

 Continued from page 20

We are an all volunteer organization and we need your help And it’s good for you, too. Sharpen your public speaking skills, hone management/ leadership skills and have a good time. We can always use more volunteers. To help or share your ideas, contact our President, Kathy Greenway, CSI, CFM or Membership Chairs, Valarie Harris, FCSI, CCPR and Teena Santiago, CSI, CDT.

Remember The “Joe Back Invitational” Membership Contest As winner of last year’s Craig Mount Invitational, Joe Back is graciously continuing the tradition. The winner will be the person bring in the most new members between November 1, 2009 and June 30, 2010. Joe is personally selecting a bottle of wine. He says Craig set the bar really high, so it should be a good one. Both Craig and Joe would be glad to share membership recruitment ideas with you. Contact Joe at jback@ccd.usc.edu or Craig at Craig.Mount@aecom.com Let Valarie Harris know when you refer new members.y Valarieh@pacbell.net

THE LOS ANGELES CHAPTER THE LOS ANGELES CHAPTER

The Los Angeles Chapter of CSI Membership Committee

C u r m u gLe o n â&#x20AC;&#x2122; s c o r n e r

Missing Standards by Sheldon Wolfe, RA, FCSI, CCS, CCCA

industry standards, published by the Steel Door Institute (SDI) and the National Association of Architectural Metal Manufacturers (NAAMM). Unfortunately, not all types of building products can be specified by use of similar standards.

Before you start that e-mail telling me how difficult it is to specify hollow metal doors, let me Although there may be a few products add that the number of grades, that require little thought in specifying, types, options, and finishes requires the most require some minimum amount of specifier to understand the hollow metal research, comparison of similar products, door and frame standards and determination of before making the several the right combination decisions needed to write of characteristics best By setting standards, the specifications. Each of suited to a project. industry organizations the hollow metal standards serve a valuable purpose... Even then, the process organizations has described And if those standards are can be straightforward every component of hollow and fairly simple, based on analysis rather metal doors and frames, provided the type of than just a consensus of how they are fabricated and product is common, installed, and which models what is available, so much governed by widely are suitable for a variety of the better. accepted standards applications. All of those for materials and things are well-defined in performance, wellthe standards, and most manufacturers described in product data, and supported indicate which doors and frames comply by reputable manufacturers and with which standards. representatives. Hollow metal doors However, some products are far more and frames are a good example. Most difficult to specify than others, despite manufacturers produce them according abundant and readily available information. to one or both of two sets of common

M A Y / JUNE 2 0 1 0

One group that comes immediately to mind is coatings. Unlike hollow metal doors, coatings have little in the way of industry standards, and there are many ways of achieving the same result. For example, say we want a waterproof coating for an indoor floor. A variety of basic chemistries are available - acrylic, epoxy, polyester, polyurethane, and perhaps others. Some of these are better than others depending on what they will be exposed to, and some are more decorative than others, but itâ&#x20AC;&#x2122;s likely that all would be acceptable if they need to contain only water. Even if one type of chemistry rises to the top as being superior to the others, there may be countless varieties of that type. To add to the fun, manufacturers use different combinations of primer and top coats, have widely different test results for physical characteristics, sometimes use different test standards for the same characteristic, combine different types of chemistries in different ways, require different preparation, have different application rates, and specify different requirements for curing. Continued on page 23 ď&#x192;Ž 22

Curmudgeon’s Corner

M A Y / JUNE 2 0 1 0

 Continued from page 22 One manufacturer may claim you need 6,000 PSI compressive strength and 200% elongation, while another says you need 10,000 PSI and only 125%. One says you need a primer for a given situation, another says you don’t. One says you need to apply two topcoats, another says only one. One says you need a seal coat, another says you don’t. And so on. All of them make logical arguments for their particular systems, and all can produce long lists of local applications. All of which makes it difficult to logically select a product to specify, and makes it equally as difficult to evaluate substitution requests. Paints are almost as bad as floor coatings, but, because they will be repainted every few years, the performance characteristics are far less important. Otherwise, paints suffer from the same problem as floor coatings - few widely accepted standards. I’d like to have a rational basis for making decisions about coating properties. By that, I mean a scientifically derived set of standards based on actual performance requirements. I’m fairly certain that the reason manufacturer A says you need 6,000 PSI tensile strength,

and manufacturer B says you need 10,000 PSI, is that those are the values their products have. I have yet to see someone say, “Oak Ridge National Laboratory has determined that a floor coating system should have a minimum compressive strength of 4,792 PSI.” Coatings aren’t the only problem; foam thermal insulation is another. We have specified extruded polystyrene with 25 PSI compressive strength for a long time, not because of any research, but because that’s what is required by ASTM C578 - and that is because that is what is produced and commonly used. Polyisocyanurate roofing insulation is available in 16, 20, and 25 PSI varieties. How do we compare the two types of insulation? If extruded polystyrene should be 25 PSI, should not polyisocyanurate also be 25 PSI? What is the rational basis for making this decision? Going back to hollow metal doors, I doubt there is any research that tells us what the thickness of the face sheets should be, but in this case I don’t think it’s necessary. The gauges used probably

are based on empirical evidence, but more important, one manufacturer isn’t trying to tell me that the face sheets should be one thing while the other manufacturers are saying something else. It has been stated that industry standards such as those published by SDI and NAAMM are not sufficient, as they tend to reflect the lowest performance of the association members. Even if that is true, those standards still provide a valuable service by specifying a multitude of characteristics, allowing the specifier to use them as a base. After that, it is relatively easy to specify that a hinge reinforcement or some other component be something different from that required by the standard.

C SI P r o d u c t S h o w s

Annette Wren, FCSI, CDT As an Industry Member, how can you choose trade shows wisely to maximize your investment? You should know that one of the best bargains for promoting to specification writers is the local CSI Chapter trade show. A majority of design professionals do not travel to national trade shows to get product information even in good economic times. Most of the efficient worker bees who produce these CSI shows are volunteers and the results are BETTER than the professionally produced events. How can you obtain information about local CSI chapters? Read on!

… one of the best bargains for promoting to specification writers is the local CSI Chapter trade show. Once upon a time at the beginning of the CSI fiscal year, West Region CSI Editors awaited a very special list compiled by the editor of the Sacramento CSI newsletter, Toni Potter. That list provided the date, time, location and contact information for each upcoming show. No need to search all over sites for simple information. That list appeared in our newsletters in time to assist potential exhibitors budgeting for the following fiscal year. Toni passed away several years ago and the “one stop shopping” list went with her. This is in your honor, Toni!

M A Y / June, 2 0 1 0

UPCOMING CSI Trade Shows – Western United States May 11, 2010 - Portland Chapter CSI What: Construction Industry Forum 2010 Where: Two World Trade Center, Portland, Oregon Contact: Cherie McNabb at cherie.McNabb@forbo.com

September 14, 2010 - Orange County Chapter CSI What: Construction Products & Services Exposition 2010 Where: Astor Classics Museum & Event Center, Anaheim, California When: 4:30 PM – 7:30 PM Contact: Bryan Stanley at 714-221-5520

Sept 23 - 27, 2010 Northwest CSI Leadership/Region Conference September 23 – 27, 2010 Hosted by the Idaho Chapter CSI & Big Sky Chapter CSI Where: Holiday Inn Sun Spree Resort, West Yellowstone, Montana ONLINE REGISTRATION at www.idahochaptercsi.org

Sept 30 - OCt. 3, 2010 West Region CSI Conference hosted by Fresno Chapter CSI September 30 – October 3, 2010 Where: Tenaya Lodge Yosemite, California For information call: 800-743-1890

Continued on page 25  24

C SI P r o d u c t s h o w s

M A Y / June, 2 0 1 0

ď&#x192; Continued from page 24

Membership Meeting Tabletop Opportunities LOS ANGELES CHAPTER CSI When: 4th Wednesday of every month. Sign up at www.lacsi.org

Las Vegas Chapter CSI

DAVID HOLDEN SMITH PHOTOGRAPHY ARCHITECTURAL | FINE ART 818.326.6314 imagesmithed.com info@imagesmithed.com

When: 2nd Tuesday Contact: Paul R. Ricciuti; Email: pricciuti@cox.net or (702) 436-2899

Mt. Rainier Chapter CSI When: First Thursday Contact: To participate in our Product Display Program, call Nora Vivarelli at (206) 409-3870 to schedule.

Sacramento Chapter CSI Email: info@csisacto.org for information regarding tabletop opportunities

Spokane Chapter CSI www.csispokane.org for information regarding tabletop opportunities. Trade Show TBD

Bl o g S ho w me yo ur s & I'll sh ow yo u mi ne ! by Ralph Liebing, RA, CSI, CDT

Wouldn’t it be interesting if, instead of a specification competition, we had a “specification comparison”? Something a little lighter, for a change, but still productive and interesting! I think this would really be both helpful and educational for all, since we all do not write our specs in exactly the same way. This is due in part to the requirements of our clients [public versus private versus governmental, etc.]. In addition, much of it has to do with our philosophy, our direction and our opinions. Also, we need to understand that relatively few of us ever are sued [is that a mark of success?] and when so engaged, it is usually over some nontechnical wording [attorneys love to twist words, meanings and intentions to their clients benefit, which makes suits unfair challenges to us, being basically non-

M A Y / JUNE 2 0 1 0 legal as we are]. Failure, for whatever reason, usually is not related to bad selections and directions, but toward improper installation, or manufacturing shortcomings.

our requirements in precisely the same manner [nor do we need to]; we tend to re-use products that have been successful for us in the past, but which are not universal with us all; our products are about as individual as our fingerprints, or the proverbial dissimilar snowflakes! It would just be interesting to see how we formulate, compile and present our specs [as opposed to just how we do– or should—write them].

From various discussions, we can see that there are mind boggling, vast and diverse arrays of resources and reference material that any one of us It would be neat [they still say that?] to see what has at our disposal and in which we others do-- don’t you think? Or don’t you give have confidence. Recent example– Did a whip-stitch about this? you ever hear of, or see Maybe it’s just me, but I like SDI 127J-04 in their Some of us, I think, to see, glean, crib and steal Technical Data Series always like to peek over what others do that makes Industry Alert? Whoa!!! the fence to see what’s me and my work better. I Here is really deep and have some “heroes” and interesting “stuff” not all going on elsewhere in “heroines” in this business that obvious or apparent our world. [NO list will ever be except to the deep released!!!] and have come and highly dedicated to admire [and often am amazed] what others researcher. Most of us tend to run the do. Granted our practice is different from many, hell out of “Search” in an effort to pick up but then isn’t your practice different too? any tid-bit that is appropriate or useful to our cause, circumstance or problem. I think a display along with a forum for a nice, civil, non-opinioned, non-judgmental, nonFor all its good directions, programs and pompous comparison of products [with some intentions, we all have not been corralled quiet discussion] could be beneficial and into “doing it the CSI way”-- in general principles perhaps, but not in all detail. We don’t use the same fonts; we don’t use the same wording; we don’t express Continued on page 27  26

BLog 

M A Y / JUNE 2 0 1 0

Liebing– Continued from page 26

profitable to many of us. I do realize some have reached their optimized plateau and care to go no place else, but some of us, I think, always like to peek over the fence to see what’s going on elsewhere in our world. Well, just a thought– more than likely will never occur...but, then, who knows? Hey! Wait! I think we can pull this off! I don’t perceive that we are so parochial or closeted or secretive to not allow others to see our work. Our discussions and sharing show we are open; we love to learn new things; and we are willing—always—to chip in and help others. OK! Just say where and when! How about a tabletop display at the 2010 SHOW?; examples from various offices

for viewing; only to see what others do! Might learn something [know I will]. No critiques involved, as we are not in competition to see who is closest to CSI criteria; looking at other aspects of work– appearance, fonts, formatting, colors, styles, information, presentation techniques, etc. other than technical content!

Next generation technology picks up where traditional polymeric wraps leave off!

Why not? I bet there’ll be some real doozies, innovations and great insight! See you and your example there!

Ralph W. Liebing, RA, CSI, CDT, is Senior Architect--Specifications with HIXON Architects, Engineers, Interiors, in Cincinnati OH. He may be reached at rliebing@hixson-inc.com

Air Tight Water Tight Weather Tight

• Self-adhered (no nails, no staples) • Vapor permeable

• Air and rain barrier membrane • Provides superior moisture and water protection • Reduces energy costs • Improves insulation performance • Helps prevent mold growth For a FREE Blueskin VP™ Demo Kit and more information, contact Judy Holleran, RRC, CDT, building science specialist, at (323) 363-3468 or judy.holleran@henry.com

www.henry.com

NEWS RELEASE

WWCOT joins DLR Group

DLR Group announced Feb. 23, 2010 that Southern California based WWCOT is joining the firm. WWCOT locations in Los Angeles, Modesto, Palm Springs, and Riverside will become DLR Group WWCOT and continue to work in concert to form a new Southern California office for DLR Group. A WWCOT office in Shanghai will become DLR Group WWCOT to give the firm a formal presence in Asia. The merger provides DLR Group with an established presence in Southern California. WWCOT’s award winning K-12 and Higher Education design talent and resume elevate DLR Group’s nationally recognized education design practice. WWCOT’s Healthcare, Civic, and Senior Residential Community design, and its Architecture Forensics expertise also enhance DLR Group design services nationally and provide additional revenue streams for the firm. “The merger of WWCOT adds leadership diversity and a depth of

M A Y / JUNE 2 0 1 0

design excellence that will benefit our collective client bases in California and each of the clients that our 500 employeeowners serve every day from 18 offices across the country, and now in China,” said DLR Group Managing Principal Jon Pettit, AIA, LEED AP. Signature WWCOT projects in California include Edward R. Royball Learning Center, Culver City Senior Center, Indio Teen Center, Kaiser Vineyard Medical Office Building, and historic restorations of the Bovard Administration Building at USC. The WWCOT leadership team will become Principals in DLR Group and continue to serve clients from its four California office locations. The merger also enhances both the depth and diversity of design leadership at DLR Group. WWCOT is one of the most ethnically diverse groups of professionals in the design community. DLR Group WWCOT design professionals hail from all corners of the world and collectively speak more than 20 languages. This multitude of experiences and backgrounds elevates DLR Group’s ability to assist clients in engaging and meeting the needs of diverse communities across the nation.

C o n s t r u c t 2 010

M A Y / JUNE 2 0 1 0

Have you made your plans to attend CONSTRUCT 2010, the commercial building industry EVENT for architects, specifiers, engineers, facility managers, building owners, CSI members, project managers, general contractors, designers and thousands of diverse commercial, institutional and industrial building professionals? This is held conjunction with the CSI Annual Convention and co-located with The TFM Show. CONSTRUCT offers accredited education, unparalleled networking and a full exhibit hall floor with the latest products, services and solutions for the commercial building industry. Gain the insights you need to face the future. www.constructshow.com

Pennsylvania Convention Center Philadelphia, PA USA Exhibits May 12-14 | Education May 11-14

USGB C M em b e r s h i p

M A Y / JUNE 2 0 1 0

MISSION

Did you know?

The Mission of the Los Angeles Chapter of The Construction Specifications Institute is to provide its members the opportunity to share information about materials and methods of construction, and to promote improved preparation, delivery and use of construction documents.

LACSI is now a member of USGBC? As an LACSI member, you can take advantage of our USGBC Membership and enjoy the benefits by registering on the USGBC.org website or e-mailing us at lacsi. green@gmail.com. Sign-in or register on www.USGBC.org, click onto “membership” under “your account” and connect with LA CSI. Request the connection and receive USGBC benefits: ÐÐ Discounts on reference guides, study guides, LEED Implementation guides, USGBC Education webinars and online courses, LEED exam ÐÐ Access to USGBC Member Directory

‘USGBC’ and related logo is a trademark owned by the U.S. Green Building Council and is used by permission.

The Chapter fosters the professional development of its members and provides service to the construction industry by promoting education, research, certification, recognition of outstanding accomplishments, and networking opportunities within the Chapter, Region, Institute, and construction industry.

Knowledge for Creating and Sustaining the Built Environment National website: http://www.csinet.org THE LOS ANGELES

Los Angeles Chapter:CHAPTER www.lacsi.org

Be sure to check out theANGELES new national CSI website. THE LOS CHAPTER

Magic Castle

Newsletter Editors Laura Sellmer: Lsellmer@isecinc.com Steve Taylor: steve@woodinst.com Designed by Tarvin Commercial Art 30