FAAC International PL by krista collins

Opening a Whole New World

Price List 2009 for all Systems, Products and Accessories

Swing Gate Operators Slide Gate Operators Barrier Gate Operators Accessories FAAC is the worldâ&#x20AC;&#x2122;s largest specialized manufacturer of gate operating equipment.

2009 Price List Low Voltage Operators . . . . . . . . . . . . . . . 4 Conventional Operators Swing Gate Operators . . . . . . . . . . . . 18 Barrier Gate Operators . . . . . . . . . . . 72 Barrier Gate Accessories . . . . . . . . . 85 Bollards Coming Soon! . . . . . . . . . . . . . Accessories . . . . . . . . . . . . . . . . . . . . 99 Slide Gate Operators . . . . . . . . . . . . 102 Automated Systems for . . . . . . . . . . . . . Swing Doors Coming Soon!

Contents

Exploded Views . . . . . . . . . . . . . . . . . . . 125

Swing Gate Operators

Low Voltage Systems

Contents

Model 390 . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Model 415 . . . . . . . . . . . . . . . . . . . . . . . . . 8 In-ground Operator Model 770 . . . . . . . . . . . . . . . . . . . . . . . . 12 Slide Gate Operator Model 740 . . . . . . . . . . . . . . . . . . . . . . . . . 16

Low Voltage Swing Gate Operator

.Designed for residential use

Model 390

. Two year limited warranty (see back cover)

FAAC operators for swinging gates are among the safest available. The anti-entrapment and safety provided by all gate operators can and should be improved with photocells, loop detectors, sensing edges and/or other similar devices. FAAC strongly recommends that devices such as these be installed with all automated gate systems. To guarantee the safety and efficiency of its equipment, FAAC strongly recommends that qualified personnel test the safety system on an annual basis, as well as maintain the overall hydraulic or mechanical system.

Model 390

Electromechanical Swing Gate Operator

The Model 390 was designed primarily to accommodate large pillar installations. . Easy installation . No gate modifications are necessary . Operates even in case of power failure (with optional battery back-up and subject to battery condition) . Reverse on contact . Slow down “soft stop”

Model 390

or s are f e i r e t t p Ba back-u y c n e g un emer ed to r d e e n ot l only; n norma r e d n u system ions. condit

UL 325 COMPLIANT CSI # 02820 Gate Operators

The 390 is also ideal for swinging garage doors.

Specifications Duty cycle Maximum gate swing 90 degree opening time Maximum weight per gate leaf Maximum length per gate leaf Approx. operating temperature range Voltage Absorbed power Protection class

100% 120 degrees 13 seconds 600 pounds (181.4 kg) 14 feet (3 m) -4°F to131°F (-20°C to 55°C) Primary: 115vac Secondary: 24vdc (100va transformer) 3W Nema 4x

NOTE: Operator specifications are approximate. Environmental factors can change the performance of the operator.

Model 390

Electromechanical Swing Gate Operator

Model

Package Includes

Shipping Wt (approx.)

Model 390 Basic Single Kit

Operator, 425D control panel, 14x16 enclosure, transformer batteries (2), and 2 limit switches

58 lbs. (26.3kg) 24vdc (Transformer)

Voltage

Part Number

Price

104572.5*

$1834

Part Number

Price

To make the above a master/slave (bi-parting) system use the following:

Model

Package Includes

Shipping Wt (approx.)

Voltage

390 Operator Only

Use to make the single kit into a master/slave (bi-parting) kit; or use to order replacement operator. Order necessary length needed for system of five wire cable at no charge; maximum 40 ft per system; part number is 2194 or add 2 limit switches

24 lbs. (10.9kg)

24vdc 104572 (Transformer)

$829

To complete your gate system installation, or for replacement purposes, the following peripherals can be ordered:

Model

Package Includes

Shipping Wt (approx.) Voltage

Battery (7.2 amp hour) Limit Switch

Two batteries are needed (replacement only)

6 lbs. (2.7 kg)

Shuts operator off; serves as positive stop; one limit needed for open stop, another for closed stop Transmitter FAAC single button FAAC two button Photobeam Directional with diagonal alignment; required for UL-325 compliance Receiver FAAC single channel Five Wire cable N/A Transformer 24vdc; 100va (replacement only) 425D Control Panel24vdc (replacement only)

12vdc

Part Number 3540

$58

1 lbs. (.45 kg)

390682

$31

1 lbs. (.45 kg)

1tm418ds 787317 785163 1rp418ds 2194 2114 790930

1 lbs. (.45 kg) 1 lbs. (.45 kg) 5 lbs. (2.3 kg) 2 lbs. (.9 kg)

24vdc 24vdc

* If you have any questions regarding your application, please call FAACâ&#x20AC;&#x2122;s technical department at 1-800-221-8278.

Model

Package Includes

390 Arm

Articulated replacement arm

Shipping Wt 4 lbs.

Part Number Price 738705

Price

$236

$38 $45 $210 $68 3.15/ft $108 $587

Visit us online at

www.faacusa.com

Electromechanical Swing Gate Operator

.Designed for residential use

Model 415

. Two year limited warranty (see back cover)

To guarantee the safety and efficiency of its equipment, FAAC strongly recommends that qualified personnel test the safety system on an annual basis, as well as maintain the overall hydraulic or mechanical system.

Model 415

Electromechanical Swing Gate Operator

The Model 415 was designed to provide power and versatility to an economical residential swing operator. Features . Sleek design . Sealed limit switches

Model 415

are for Batteries back-up y c n e g r e em run system o t d e d e e n . only; not conditions l a m r o n r unde

Model 415 dimensions

UL 325 COMPLIANT CSI # 02820 Gate Operators

Specifications Duty cycle Maximum gate swing 90 degree opening time Maximum weight per gate leaf Maximum length per gate leaf Approx. operating temperature range Voltage Power Consumption Current Consumption Effective Stroke Protection class

100% 110 degrees 13 seconds 700 pounds (317.5 kg) 15 feet (4.6 m) -4째F to131째F (-20째C to 55째C) Primary: 115vac Secondary: 24vdc (100va transformer) 70 W 3A 15 in. (38.1 cm) Nema 4x

NOTE: Operator specifications are approximate. Environmental factors can change the performance of the operator.

Model 415

Electromechanical Swing Gate Operator

Model

Package Includes

Shipping Wt (approx)

Voltage

Part Number

Price

415 Basic Single Kit

Operator, 425D control panel, 14x16 enclosure, transformer, and batteries (2)

58 lbs. (26.3kg)

24vdc (Transformer)

10441811.5*

$1689

Part Number

Price

To make the above a master/slave (bi-parting) system use the following:

Model

Package Includes

Shipping Wt (approx)

Voltage

415 Operator Only

25 lbs. (11.3 kg)

24vdc (Transformer) 10441811

$789

To complete your gate system installation, or for replacement purposes, the following peripherals can be ordered:

Model

Package Includes

Shipping Wt (approx.)

Battery (7.2 amp hour)

Two batteries are needed (replacement only)

6 lbs. (2.7 kg)

Transmitter

FAAC single button

1 lbs. (.45 kg)

Transmitter

FAAC two button Directional with diagonal alignment; required for UL-325 compliance

1 lbs. (.45 kg)

Receiver

FAAC single channel

1 lbs. (.45 kg)

Five Wire cable

For use with master or master/slave system; (included with basic kit, see above)

N/A

Transformer

24vdc; 100va (replacement only)

5 lbs. (2.3 kg)

24vdc (replacement only)

12vdc

2 lbs. (.9 kg)

3540

787317 785163 1rp418ds 2194

24vdc 24vdc

* If you have any questions regarding your application, please call FAACâ&#x20AC;&#x2122;s technical department at 1-800-221-8278.

Part Number

1tm418ds

1 lbs. (.45 kg)

Photobeam

425D Control Panel

Voltage

2114 790930

Price $58 $38 $45 $210 $68 3.15/ft $108 $587

Visit us online at

www.faacusa.com

In-ground Swing Gate Operator

.Designed for residential use

Model 770

. Two year limited warranty (see back cover)

Model 770 Electromechanical Swing Gate Operator The Model 770 was designed for in-ground installation so as not to detract from the appearance of the gate.

Features . Invisible installation . Minimized “pinch points” . Reverse on contact . Operates even in case of power failure (subject to battery condition) . Slow down “soft stop” . Optional 140o or 180o opening kits available

Model 770 in-ground application

UL 325 COMPLIANT CSI # 02820 Gate Operators

100% 110 degrees (140 or 180 degrees with optional kit) 13 seconds 800 pounds (363 kg) 10 feet (3 m) -4°F to131°F (-20°C to 55°C) Primary: 115vac Secondary: 24vdc (100va transformer) 70 W 3A Nema 4x

NOTE: Operator specifications are approximate. Environmental factors can change the performance of the operator.

* If you have any questions regarding your application, please call FAAC’s technical department at 1-800-221-8278.

Model 770 Electromechanical Swing Gate Operator Model

Package Includes

Shipping Wt (approx.)

Voltage

Part Number

Price

770 Basic Single Kit

Operator, support box, 425D control panel, 14x16 in. enclosure, transformer and batteries (2).

98 lb. (44.5 kg)

24vdc (Transformer)

106753.5*

$2299

Package Includes

Shipping Wt (approx.)

Voltage

Part Number

Price

24 lb. (10.9 kg)

24vdc

106753

$899

Needed with operator for bi-parting system

36 lb (16.3 kg)

490065

$414

To make the above a master/slave (bi-parting) system use the following:

Model 770 Operator Only

Support Box

(Transformer)

To complete your gate system installation, or for replacement purposes, the following peripherals can be ordered:

Model

Package Includes

Shipping Wt

Voltage Part Number (approx.)

Price

Battery (7.2 amp hour)

Two batteries are needed (replacement only)

6 lbs. (2.7 kg

12vdc

3540

$58

Transmitter

FAAC single button

1 lb. (.45 kg)

1tm418ds

$38

Transmitter

FAAC two button

1 lb. (.45 kg)

787317

$45

Photobeam

Directional with diagonal alignment; required for UL-325 compliance 1 lb. (.45 kg)

785163

$210

Receiver

FAAC single channel

1 lb. (.45 kg)

1RP418ds

$68

1 lb. (.45 kg)

2194

3.15/ft

390612

$166

Five Wire Cable 140 Degree Opening Kit

Use to increase opening capacity to 140 degrees

180 Degree Opening Kit

Use to increase opening capacity to 180 degrees

490111

$467

Positive Stop Kit (Open)

Use for bolt on positive stop in the open position

2 lb. (.9 kg)

722121

$46

Positive Stop Kit (Closed)

Use for bolt on positive stop in the closed position

2 lb. (.9 kg)

722122

$115

Transformer

24vdc; 100va (replacement only)

5 lb. (2.3 kg)

24vdc

2114

$108

425D Control Panel

24vdc (replacement only)

2 lb. (.9 kg)

24vdc

790930

$587

Visit us online at

www.faacusa.com

Slide Gate Operator

.Designed for residential use

Model 740

. Two year limited warranty (see back cover)

FAAC operators for sliding gates are among the safest available. The anti-entrapment and safety provided by all gate operators can and should be improved with photocells, loop detectors, sensing edges and/or other similar devices. FAAC strongly recommends that devices such as these be installed with all automated gate systems. To guarantee the safety and efficiency of its equipment, FAAC strongly recommends that qualified personnel test the safety system on an annual basis, as well as maintain the overall hydraulic or mechanical system.

Model 740

Slide Gate Operator

The Model 740 was designed as a rack & pinion operator for residential applications using a gate weighing a maximum of 880 pounds. .Gate automatically locks when not operating . Slow down “soft stop” on opening and closing . Operates even in case of power failure (subject to battery condition) . External limits . Convenient manual release

Specifications (Rack & Pinion configuration only) Voltage

Primary: 115vac Secondary: 24vdc (100va transformer)

Duty Cycle

100%

Maximum weight per gate leaf

880 lb (399 kg)

Maximum length per gate leaf

30 ft (9.1 m)

Absorbed power/absorbed current

70 W/3 A

Approx. operating temperature range

-4°F to 131°F (-20°C to 55°C)

Model 740 (24 volt)

NOTE: Operator specifications are approximate. Environmental factors can change the preformance of the operator.

NOTE: Due to the size of the Model 740 transformer, it requires: (A) a separate enclosure with electrical outlet mounted at the gate site (see accessory below) or (B) the gate system is plugged into an electrical outlet INSIDE the residence.

Model

Kit Includes

Model 740 Single Basic Kit (no peripherals)

1 Operator, 1 Control Panel, Transformer, Foundation plate (12” x 7”)

Shipping Wt (approx.) 30lb. (13.6 kg)

Voltage

Part Number

Price

24vdc (Transformer)

10978021

$1,050

790939

$588

742D Control Panel (replacement only)

719325

$50

Battery Back-up Kit

To add battery function to your system, kit includes: 2 batteries (1.2 amp hour) wiring cable, support bracket (fits inside cover)

2 lb (.9 kg)

12vdc

390901

$132

Battery

1.2 amp hour (replacement only)

1 lb (.45 kg)

12vdc

7550075

$53

Gear Rack (3.28 ft) (Nylon)

006 Pice List

Swing Operators

Contents

UL Class 325 Descriptions & FAAC Operators

Class 2

Residential vehicular gate operator

Commercial/ General access vehicular gate operator Industrial/ Limited access vehicular gate operator

Class 4

FAAC Models Duty Cycle Typical Usea

Class 3

Class 1

Class

400/402/412 415/422/620 640/750/760

Limited duty

Conventional

Gate System Safety Brochure . . . . . . . . 20 Choosing the Correct Operator . . . . . . . 23 Four Decisions . . . . . . . . . . . . . . . . . . . . . 23 Mounting Geometry . . . . . . . . . . . . . . . . . 26 Model 412 . . . . . . . . . . . . . . . . . . . . . . . . 29 Model 415 . . . . . . . . . . . . . . . . . . . . . . . . 35 Model 400 . . . . . . . . . . . . . . . . . . . . . . . . 41 Model 402/422. . . . . . . . . . . . . . . . . . . . . 48 Model 750 . . . . . . . . . . . . . . . . . . . . . . . . 55 Model 760.................................................63

• Home use • Small apartment building, up to 4 units per building, limited public access • Apartment buildings • Open public access

400/620/640

Continuous Duty

• No public access

400/620/640

Continuous Duty

• Prison related security

Restricted Access vehicular gate 620/640 operator

Since 1965, FAAC has become an industry leader in the development and promotion of safer automated gate systems. FAAC operators for swinging and sliding gates are among the safest available. The anti-entrapment and security protection provided by all gate operators can and should improved with photobeams, loop detectors, sensing edges and/or other similar devices. FAAC strongly recommends that devices such as those highlighted in this brochure be installed with all automated gate systems.

Safety

A Complete Swing Gate System Designed with Safety in Mind

What is UL 325 and why is it important? In order to prevent personal injuries associated with automated gate systems, United Laboratories (UL), along with several governmentsponsored consumer safety organizations, developed what is called the UL 325 Standards for gate safety (much the same as has now been done with automatic garage door systems). These standards are meant to protect people, not vehicles, by providing at least two types of safety measures (primary and secondary) in the event a person becomes entrapped by the gate system. Consequently, every manufacturer must have their products tested at an approved laboratory to ensure that their safety measures work. For FAAC, our safety measures include a hydraulic bypass as primary and photobeams as secondary...and we've been providing these safety standards for more than 40 years! FAAC will be happy to package your gate system so that it can be UL 325 compliant, right out of the box. For more information on additional access control options, refer to the â&#x20AC;&#x153;ACCESSORIES CATALOGâ&#x20AC;? section on the Home Page of our web site at www.faacusa.com.

6 1 8

3 5

To guarantee the safety and efficiency of its equipment, FAAC also strongly recommends that qualified personnel perform an annual safety test on your gate system, as well as maintain the overall hydraulic or mechanical system.

Gate Safety System

2 9

Gate Operator

The swing gate operator (either gate-mounted or inground) automates the gate.

GATE INSIDE

Control Panel

The “brain” of the gate system, the control panel is usually housed in a fiberglass or metal, weather-resistant enclosure along with other important access control devices. For security and safety, it is recommended that this enclosure be lockable. Another recommended option is to install a “pre-wired” control system from the manufacturer that provides accurate, organized wiring which is extremely helpful in future troubleshooting or repairs.

Access Control Options

5 4 Loops Normally used to activate traffic lights, Inground loop detectors can also signal your gate operator to open or close. But remember, they are designed to protect vehicles only , not to protect pedestrians or individuals inside the fenced area.

Photobeams Photobeams protect anything that “breaks” the beam (vehicles, pedestrians, animals and, especially, children) which causes a reversal of the gate operators. Two sets of photobeams are recommended for best coverage.

A variety of access control devices are available, including these conventional options: • Keypad: provides multiple codes for different visitors such as relatives, workers, regular deliveries, etc. • Keyswitch/card reader: simplified access control using a special key or coded plastic card. • Telephone entry: connects to existing phone line and features distinctive ring to alert you that someone is at the gate. Gates can be opened from the phone itself, and a “hold open” feature allows for gates to remain open for extended periods of time. • Radios: radio receiver plugs into control panel and transmitters are conveniently kept in vehicles or on key ring.

Gate Stops (concealed)

7 6

Free Exit For residential purposes, this in-ground loop or radio system automatically opens and closes your gate system to allow guests or visitors to exit your property without you having to do anything.

Gate stops are required on all FAAC gate systems. Stops limit the extent of gate travel and help protect the operator from damaging wear and tear. Stops can be fabricated and attached to the gate leaves, but don’t look particularly attractive and can also create unsafe “pinch points.” These problems can be solved by installing gate stops that are totally concealed inside the gate operator cover.

8 Your gate system can also be set up to provide special

9 Warning Light A warning light will alert anyone near the gate of its imminent movement plus helps to illuminate the gate area.

Battery Back-up Having a battery back-up unit as part of your gate system provides the peace of mind of knowing that your gate will continue to operate even if the power goes out.

GATE-SAFE safety options, including “Gate-safe” and “Gate-secure” configurations (refer also to #9 on this sheet). Gate-safe: During power outages, the hydraulic operator can be configured to allow the gate to be pushed open, permitting emergency access to your property. Gate-secure: During power outages, your gate stays closed and locked.

CHOOSING LINEAR STYLE SWING GATE OPERATORS Features/Operators

415

415-24V

402

422

400

400EG

Max leaf length (ft.) Max leaf length (ft.) w/ External Lock Maximum Force Output

15 675

15 630

10 1550

23 1740

Duty (1)

Medium

Continuous

Medium

Continuous

Use Frequency (Cycles per hour)

Power Supply (V)

115

Alternative Power Supply Source Battery (AC Power Failure)

BC Pro 1050

24V Sources

Yes (Optional)

115 or 230 BC Pro 1050 (115V or 700i (230V) No

Anti-Crushing Protection

Electronic

End Travel Declaration

Timed

Self-Learning

Timed

Rod Effective Stroke (in.) Max Opening Angle (Degrees) Forced Gate Resistance (lbs. on 6â&#x20AC;&#x2122; leaf)

15 3/4

9 1/2

110

100

110

125

290

220 (2)

300 (2)

Optional (Model - 80)

Optional (Model - 84)

1,000,000

Oil Bath Transmission

$2,320.00

$2,525.00

$2,725.00

Hydrolic By-Pass Hydrolic By-Pass Hydrolic By-Pass Hydrolic By-Pass +Electronic +Electronic +Electronic +Electronic

No Stops Required No Stops Required Optional Built-In Mechanical Stops (Limit Switches) (Limit Switches) (Model - 80) Product Life Expectations 200,000 (4) 200,000 1,000,000 (5) (Cycles) Transmission Transmission Oil Bath w/ Low-Temp w/ Low-Temp Transmission Grease Grease Cost (Single Basic Kit)

$1,419.00

$1,689.00

$2,010.00

(1) LIGHT duty: Single residence application(1-2 Families) MEDIUM duty: Subdivision application (10-30 Families) CONTINUOUS duty: Apartment complex applicaton (> 30 families) and industrial, public and commercial applications. (2) The hydrolic operators do not undergo permanent damages (repairable) (3) About 10 years at 15 cycles/day (4) About 10 years at 55 cycles/day (5) About 10 years at 280 cycles/day

Selecting the Correct Operator for the Application THERE ARE FOUR “DECISIONS” THAT YOU NEED TO MAKE BEFORE SELECTING A GATE OPERATOR. FAAC offers many different models of swing gate operators. Models are designed to fit certain applications. The following pages provide background information to help you select the best operator for your application.

DECISION #1:

WHICH DIRECTION TO SWING THE GATE? FAAC gate mounted and in-ground operators can swing gates either inward or outward. Gate mounted operators can be kept inside the property, while the direction of gate swing is best for traffic flow. In-ground operators are mounted beneath the gates. These options reduce opportunities for vandalism and improve appearance.

Outward Swing (gate mounted operator) House

Street

Inward Swing (gate mounted operator) * If you have any questions regarding your application, please call FAAC’s technical department at 1-800-221-8278.

DECISION #2:

HOW MANY DEGREES OF SWING ARE REQUIRED?

.One FAAC gate operator (Model 750) can swing a gate up to 180o. . All other models of FAAC operators can swing a gate 90o to 148o. . Openings which require swings greater than 90o will need certain FAAC operator models. . The swing of an operator applies equally to inward or outward swinging gates. Drive

Drive

Drive 90o

110o

Street

115o

Street

All FAAC operators: Models 412, 402, 422, 400, 750, 760

Street

Models 412, 400, 750, 760.

Models 400, 750, 760.

Drive

Drive 125o

140o

Street

Street Models 750 (up to 180o), 760 (up to 148 with “soft stop”)

Models 400 EG (extended geometry),750, 760.

DECISION #3:

SPEED AND LEAF LENGTH Some thought should be given to the speed at which the gate will travel. The longer the gate leaf, the faster the traveling edge must move to clear an area in a given amount of time. A speed of 40 feet/minute (12.2 meters/minute) is a “bench mark” velocity. It permits efficient operation while limiting the energy in the moving gate leaf. The lower the energy, the less chance of damage to property or injury to people in the event of accidental contact with the moving gate. Examples illustrating the relationship between operator speed, gate leaf length, and the velocity of the leaf’s traveling edge Speed options available with FAAC Operators (in seconds needed to swing a gate 90o)

EXAMPLE: Velocity of the traveling edge of an 8 ft (2.4 m) leaf [in feet/m and (meters/m)]

Longest leaf which can be used if the velocity of the traveling edge is not to exceed 40 fpm (12.2 mpm)

6 sec. 12 sec. 15 sec. 17 sec. 23 sec.

126 fpm (38 mpm) 63 fpm (19 mpm) 50 fpm (15 mpm) 44 fpm (14 mpm) 33 fpm (10 mpm)

2.5 ft (0.8 m) 5 ft (1.5 m) 6 ft (1.9 m) 7.5 ft (2.3 m) 10 ft (3 m)

* If you have any questions regarding your application, please call FAAC’s technical department at 1-800-221-8278.

DECISION #4:

WHAT TYPE OF MOUNTING GEOMETRY? Decisions regarding mounting geometry apply to gate mounted operators: Models 412, 415, 402, 422 and 400. As shown in the diagrams below, the operators must be mounted at an angle to the gate. Correct mounting geometry assures that the desired degrees of swing are achieved, that the gate speed is correct, and that the operator and gate will operate properly and have a long life.

1. Example of a mounting for an inward swinging gate.

Example of a mounting for an outward swinging gate.

Special Situations

Sometimes the mounting measurements will result in a flush mounting

Sometimes a column must be notched in order to accommodate the correct mounting geometry.

Notched column

Note: If, in your installation, notching a column is not practical, other solutions are available: 1. Install operators using an outward swing. 2. Upgrade to an operator with more mounting flexibility. 3. Use an in-ground operator (see Model 750 on page 55 or Model 760 on page 63).

* If you have any questions regarding your application, please call FAACâ&#x20AC;&#x2122;s technical department at 1-800-221-8278.

Mounting Geometry Outward Swing B D

Model 400 standard, high speed, and slow speed models

400 EG (Extended Geometry)

402

412

422

422 VHS

All Models

90° Swing

110° Swing

115° Swing

125° Swing

5 in. (12.7 cm)

–

4 in. (10 cm)

–

5 in. (12.7 cm)

–

4.75 in. (12 cm)

–

28 in. (71.12 cm)

–

28 in. (71.12 cm)

–

not a constraint

–

not a constraint

–

7.875 in. (20 cm)* or 11 in. (29 cm)**

–

5.75 in. (14.6 cm)**

4.75 in. (13 cm)

7.5 in. (19 cm)* or 3 in. (7.5 cm)**

–

7 in. (17.8 cm)

6.625 in. (17 cm)

32.75 in. (83.19 cm)

–

32.75 in. (93.19 cm)

32.75 in. (83.19 cm)

not a constraint

–

not a constraint

4.5 in. (11.4 cm)

–

4.5 in. (11.4 cm)

–

26.25 in. (66.68 cm)

–

not a constraint

–

5.75 in. (14.5 cm)

4.875 in. (12.5 cm)

–

5.75 in. (14.5 cm)

4.875 in. (12.5 cm)

–

24 in. (60.96 cm)

–

not a constraint

–

4.75 in. (12 cm)

–

4.75 in. (12 cm)

–

28.25 in. (71.45 cm)

–

not a constraint

–

3.125 in. (7.94 cm)

–

3.125 in. (7.94 cm)

–

23.75 in. (60.33 cm)

–

not a constraint

–

Must be less than A

* For A and B, if you choose one of these values with one asterisk, then you must choose the other values with one asterisk; the values assume a column that measures less than 20” square. ** For A and B,, if you choose one of these values with two asterisk, then you must choose the other values with two asterisk; the values assume a column that measures less than 20” square. * Measurements and weights stated in this Price List are approximate. For exact specifications, please refer to the Installation Manual or contact our technical department at 1-800-221-8278.

Mounting Geometry Inward Swing

Model 400 standard, high speed, and slow speed models

400 EG (Extended Geometry)

402

412

422

422 VHS

All Models

90° Swing

110° Swing

115° Swing

125° Swing

5 in. (12.7 cm)

–

4 in. (10 cm)

–

5 in. (12.7 cm)

–

4.75 in. (12 cm)

–

38.1875 in. (71.12 cm)

–

38.1875 in. (97 cm)

–

up to 4 in. (10 cm)

–

up to 2 in. (5 cm)

–

7.875 in. (20 cm)* or 11.5 in. (29 cm)**

–

5.75 in. (14.6 cm)**

4.75 in. (13 cm)

7.5 in. (19 cm)* or 3 in. (7.5 cm)**

–

7 in. (17.8 cm)

6.625 in. (17 cm)

47.625 in. (121 cm)

–

47.5 in. (120 cm)

up to 5.25 in. (14 cm)* or 10 in. (25.5 cm)**

–

up to 3.5 in. (8.9 cm)**

up to 2.875 in. (7 cm)

4.5 in. (11.4 cm)

–

4.5 in. (11.4 cm)

–

35.5 in. (90.2 cm)

–

2 in. (5.1 cm)***

–

5.75 in. (14.5 cm)

4.875 in. (12.5 cm)

–

5.75 in. (14.5 cm)

4.875 in. (12.5 cm)

–

36.25 in. (92.1 cm)

–

up to 4 in. (10 cm)

up to 3.125 in. (8 cm)

–

4.75 in. (12 cm)

–

4.75 in. (12 cm)

–

36.25 in. (92.1 cm)

–

up to 2 in. (5.1 cm)***

–

3.125 in. (7.94 cm)

–

3.125 in. (7.94 cm)

–

30.25 in. (76.84 cm)

–

up to 2 in. (5.1 cm)***

–

Must be less than A

* For A, B, and D, if you choose one of these values with one asterisk, then you must choose the other values with one asterisk; the values assume a column that measures less than 20” square. ** For A, B, and D, if you choose one of these values with two asterisk, then you must choose the other values with two asterisk; the values assume a column that measures less than 20” square. *** If greater than this value, construct a recess liner. * Measurements and weights stated in this Price List are approximate. For exact specifications, please refer to the Installation Manual or contact our technical department at 1-800-221-8278.

Visit us online at

www.faacusa.com

Electromechanical Swing Gate Operator

. Designed for residential applications

Model 412

. Two year limited warranty (see back cover)

Model 412 Electromechanical Swing Gate Operator Model 412 HIGH VOLTAGE includes: .One 455 D control panel which operates single leaf or master/slave gates . Choice of 6 operating modes including: - “pulse-to-open, pulse-to-close” - automatic timed closure - “man present” (separate open and close contacts) . 30 VDC power for accessories . 115 VAC

The Model 412’s electromechanical operation is ideal for residential applications. . Designed for light residential, single family use . UL 325 compliant . Mechanical locking in the opened and closed positions . Easy interconnection of loop detectors, photocells, etc. to reverse a gate if an obstacle is sensed . Easy interconnection of actuating devices like remote control radios, key pads and telephone entry systems . On-board diagnostic LEDs . Convenient manual release in case of power failure The 412 is not recommended for use with solid gates or in high wind situations.

Model 412 kit for bi-parting gates: major components (not to scale)

Model 412 Operating Specifications Parameter

High Voltage

Application

Single family residence, single leaf or bi-parting gate (vehicles only, not for pedestrian use) (not recommended for solid gates)

Cycles per hour

Maximum gate swing

110 degrees

90 degree opening time

13 seconds

Maximum weight per gate leaf

500 pounds, (226.8 kg)

Maximum length per gate leaf

14 feet (4.2 m)

Approx. operating temperature range

-4oF to 131oF (-20oC to 55oC)

Mechanical locking

Available in opened and closed positions

Voltage

115 VAC

Model 412 m) m) 8 c 2 c 99. (60. ( in. in. 25 75 39. 23.

7.5 in. ) (19.2 cm cm) 5 . (9

3.7

5 i n.

(9.

5 c m)

n 4 i 11.9 cm) (2

2.3

6 i n. (6

cm)

Note: Operator specifications are approximate. Environmental factors can change the performance of the operator. Your installer will advise you which model of operator will work best for your site and application. * Measurements and weights stated in this Price List are approximate and subject to change without notice. For exact specifications, please refer to the Installation Manual or contact our technical department at 1-800-221-8278.

Model 412 Electromechanical Swing Gate Operator Model Description Model 412 kit for Bi-Parting Gates

Package Includes

Shipping Weight

OPTION 1: 50 lb (22.7 kg) 1 DX & SX operator & cover w/ mountng hardware 455 D Control panel w/10 x 12 in. enclosure 1 radio receiver, 2 radio transmitters, 2 manual release keys, 2 photobeam sets, 4 warning signs OPTION 2: Same options except 14 X 16 pre-wired enclosure 1 DX operator & cover 455 D Control panel w/10 x 12 in. enclosure & mounting hardware 1 radio receiver, 2 radio transmitters 2 manual release keys, 2 photobeam sets 2 warning signs

36 lb (16.3 kg)

1 SX operator & cover 455 D Control panel w/10 x 12 in. enclosure & mounting hardware 1 radio receiver, 2 radio transmitters 2 manual release keys, 2 photobeam sets 2 warning signs

36 lb (16.3 kg)

Model 412 DX operator for Single Leaf RIGHT HINGED GATE

1 DX operator & cover

20 lb (9.1 kg)

Model 412 SX operator for Single Leaf LEFT HINGED GATE

1 SX operator & cover

Model 412 DX KIT for Single Leaf RIGHT HINGED GATE

Model 412 SX KIT for Single Leaf LEFT HINGED GATE

Voltage Part Number

Price

115VAC 412BP1-R*

$1,965

115VAC 412BP1S-R

$2,215

412DX1-R*

1,390

115VAC

Model 412 operators require a Model 455 D control panel, which can operate a single leaf or master/slave gate system. 412SX1-R*

1,390

115VAC

The 455D has the following functions and features: . Operates a single leaf or a

104475

679

104476

679

115VAC 20 lb (9.1 kg) 115VAC

To complete your gate system, or for replacement purposes, the following accessories can be ordered:

Accessory

Description

Shipping Weight

Photobeam

Directional with diagonal alignment; required for UL-325 compliance.

2 lb (1 kg)

785163

Photobeam Mounting Post Standard Photobeam Mounting Post Double

Foundation plate included

5 lb (2.2 kg)

Foundation plate included

9 lb (4.1 kg)

401028/ 737630* 401035/ 737630*

Photocell Set: also reguires Photocell Metal Housing or Photocell Plastic Housing

Model 455D control panel with 10x12 enclosure

Voltage Part Number

2 lb (1 kg) 3 lb (1.4 kg) 2 lb (1 kg)

785152 720089 720086 1RP418DS 1TM418DS 787317 412003

Price $210 105 170 257 37 8

Receiver Transmitter Transmitter Antenna

FAAC single channel FAAC single button FAAC two button FAAC tuned antenna kit

1 lb (.5 kg) 1 lb (.5 kg) 1 lb (.5 kg) 2 lb (1 kg)

68 38 45 75

Battery Backup

BC Pro Single system backup BC Pro Dual system backup 700i Single system backup 700i Dual system backup

45 lb (16.8 kg) 45 lb (16.8 kg) 45 lb (16.8 kg) 45 lb (16.8 kg)

115V 115V 230V 230V

3520 3522 3521 3523

1,558 1,768 1,558 1,768

Control panel

455D (replacement only)

3 lb (1.4 kg)

455D w/ 14 x 16 infiberglass, hinged, lockable enclosure

26 lb (11.8kg)

115V 230V 115V 230V

790919 790926 455D115F* 455D220F*

630 630 1,055 1,055

bi-parting gate . Provides opening and closing "slow down, soft stop" convenience . Power supply: 115 VAC (+/- 10%) or 230 VAC (+6% -10%) 50-60 HZ) . Absorbed power: 10W . Motor max load: 800W . Accessories max load: .5 amp . Electric lock max load: 15 Va . Operating temperature: -78oF to +131oF . Protection fuses: .800 mA (accessories) 5 amp (motors) . Operating logics: A (automatic): signal to open, gate closes automatically after selected timed pause S (security): similar to A logic, useful in reducing tailgating E (semi-automatic): garage door-like operation; signal to open, signal to close EP (semi-automatic): similar to E logic, but second signal stops gate, third signal reverses gate B (manned, pulsed): designed for guard station use, requires 3-button switch (pulsed) to open, close and stop gate C (manned, constant): similar to B logic, but 3-button switch requires constant pressure on each button . Opening/closing time: 0 to 120 seconds (programmable) . Pause time: 0 to 4 minutes (programmable) . Closing leaf delay: 0 to 4 minutes (programmable) . Opening leaf display: 2 seconds (can be disabled) . Torque: adjustable from 0 to 50 levels . On board programming via push button . Easy interconnection of actuating and reversing devices . Open/Hold open function

You can upgrade from the 14 X16 pre-wired enclosure to a 20 X 16 metal pre-wired enclosure for only $100.00 net more.

Model 412 Electromechanical Swing Gate Operator

FAAC Model BC Pro 1050 and Model 700i battery back-up units Specifications

BC Pro 1050

700i

Size: Weight: Input/Output voltage: Input/Output frequency: Output VA: Output watts: Recharge rate to 90%:

14 x 16 x 6 in. (35.6 x 40.6 x 15.2 cm) 45 lbs. (16.8 kg) 115 VAC 230 VAC 60 Hz 50/60 Hz 1050 700 680 450 2-4 hours

Maximum surge current:

36,000 amps

160*

Low volt switch to battery: Max amp. draw:

94 VAC 5 amp.

190 VAC 3 amp.

Shipping Weight: Part Number: Price:

3520 $1,558

*AC suppression joule/amp ratings

Model BC Pro 1050 battery back-up Ideal useage for the BC Pro and 700I battery backup systems: Fail safe (gates open during power outage and remain open until power is restored). Even if the power outage is prolonged and the batteries die, the gates will remain open to allow normal ingress and egress during the power outage. Because the BC Pro and 700I battery backup systems run off the batteries, gate operation during a power outage is dependant upon the batteries being well conditioned and charged. If they are not, the voltage does not run through to the control panel being backed up. The battery backup system does not shut down at all during a power outage, instead powering all peripherals being backed up with our battery backup system. Thus, the more peripherals used, the faster the batteries will die. Once the batteries do die, the gates will become inoperable and will stop at the position they were at when the batteries failed. Therefore, it is important to understand that the BC Pro or 700I battery backup systems are not intended to provide long term

FAAC Photobeam Systems Photobeam Photocell Set Designed for wall mounting or for mounting in special extruded aluminum mounting posts.

Features:

Dual Configuration: Dual System Part Number: Price $1,748

3522 1768

3523 $1,768

service in a Fail secure application (gates remain closed during power outage). Again, long term power outages could result in the batteries failing at some point, possibly leaving the gates either partially or fully open or closed.

Photobeam Mounting Posts (Standard and Double) Photobeam Mounting Post and Foundation Plate for Photobeam Set

Features: . Standard post: 22 in. high (57.5 cm)

. Angle of detection: +- 4 degrees Photobeam Set

. Obstacle detection time: 10 ms

. Double post (holds photobeam and control switch): 44 in. (111.5 cm) 401035 NOTE: Photobeam sets require 2 posts

. Housing protection IP 54

2.75 in. (7 cm)

. Output relay rating: 100 MA/24VDC 2.38 in. (5.8 cm)

3.75 in. (9.5 cm)

2.38 in. (5.8 cm) 4.5 in. (11.5 cm)

. Output relay: N.O. (Normally Opened) and N.C. (Normally Closed) . Receiver and Transmitter provide reliable all-weather sensing Dimensions: 2.75 in. x 3.75 in. x 1.75 in. (7 cm x 9.5 cm x 4.5 cm) * Measurements and weights stated in this Price List are approximate and subject to change without notice. For exact specifications, please refer to the Installation Manual or contact our technical department at 1-800-221-8278.

737630*

3.54 in. (9 cm)

. Required power supply: 24-35 VDC (available on FAAC control panels)

3521 $1,538

. Anodized aluminum

.Directional photocell with diagonal alignment

. Range: 100 ft (30 m)

45 lbs. (16.8 kg)

401028 737630* Mounting Post Footprint

Model 412 Electromechanical Swing Gate Operator FAAC Photocell Systems

Standard Photocell Set

Dimensions: 2.75 in. wide x 2.75 in. high x 4 in. deep (7 cm x 7 cm x 10.2 cm) Depth measurement includes housing. The Standard Photocell Set requires the following additional equipment (priced separately): Multi-Use Metal Housing, or Multi-Use Plastic Housing

Features: Required power supply: 19 - 34 VDC or 15 - 25 VAC (available on FAAC control panels).

Standard Photocell Set

Output relay rating: 25 VAC, 0.1A Output relay: N.O. (Normally Opened) and N.C. (Normally Closed) Transmitter to receiver sensing provides reliable all-weather sensing Range: 90 ft (27 m)

Entry Sytem Devices Photocell Metal Housing Powder coated steel. Dimensions: 2.5 in. high x 2.5 in. wide x 2.75 in. deep (6.4 cm x 6.4 cm x7 cm)

Photocell Plastic Housing Dimensions: 2.5 in. high x 2.25 in. wide x 2.75 in. deep (6.4 cm x 5.7 cm x7 cm)

Photocell Metal Housing

Photocell Plastic Housing

Visit us online at

www.faacusa.com

Electromechanical Swing Gate Operator

.Designed for residential applications

Model 415

. Two year limited warranty (see back cover)

FAAC operators for swinging gates are among the safest available. The anti-entrapment and security protection provided by all gate operators can and should be improved with photocells, loop detectors, sensing edges and/or other similar devices. FAAC strongly recommends that devices such as these be installed with all automated gate systems.

Model 415 Electromechanical Swing Gate Operator The Model 415 was designed to provide power and versatility to an economical residential swing operator.

Features . Sleek design . Sealed limit switches NOTE: If installation does not require electronic slowdown, the internal limit switches can be used as positive stops. If installation DOES require electronic slowdown, POSITIVE STOPS MUST BE USED IN PLACE OF LIMITS. When adjusting limit switches, use a hand-held screw driver, NOT A POWER SCREWDRIVER, as this can damage the limit switches.

Model 415

. Operates even in case of power failure (with optional battery back-up and subject to battery condition) . Reverse on contact . Slow down â&#x20AC;&#x153;soft stopâ&#x20AC;?

UL 325 COMPLIANT CSI # 02820 Gate Operators

Model 415 dimensions

Specifications Duty Cycle (cycles per hour)

Maximum Gate Swing

110 Degrees

90 Degree Opening Time

13 Seconds

Maximum Weight Per Gate Leaf

700 pounds (317.5 kg)

Maximum Length Per Gate Leaf

15 feet (4.6m)

Approximately Operating Temperature Range

-4*F - 131*F (-20*C - 55*C)

Voltage

115VAC

Power Consuption

300W

Current Consumption

2.5 A

Effective Stroke

15 in. (38.1cm)

Protection Class

Nema 4x

NOTE: Operator specifications are approximate. Environmental factors can change the performance of the operator.

Model 415 Model Model 415 Basic Single Kit

Electromechanical Swing Gate Operator Shipping Wt (approx.)

Package Includes

Voltage

Part Number

Price

115VAC

1044182.5*

$1419

115VAC

1044182.5L*

$1795

Voltage

Part Number

Price

115VAC

1044182

$789

Option #1 Operator, 455D control panel, 10x12 in. enclosure

46 lbs. (20.9 kg)

Option #2 Operator, 455D control panel, 14x16 in. pre-wired enclosure

65 lb (29.5 kg)

Model

Package Includes

Shipping Wt (approx.)

415 Operator Only

Use to make the single kit into a master/slave (bi-parting) kit; or use to order replacement operator.

25 lbs. (11.3 kg)

To complete your gate system, or for replacement purposes, the following accessories can be ordered:

Accessory

Description

Shipping Weight

Photobeam

Directional with diagonal alignment; required for UL-325 compliance.

2 lb (1 kg)

785163

$210

Photobeam Mounting Post Standard Photobeam Mounting Post Double

Foundation plate included

5 lb (2.2 kg)

105

Foundation plate included

9 lb (4.1 kg)

401028/ 737630* 401035/ 737630*

2 lb (1 kg) 3 lb (1.4 kg) 2 lb (1 kg)

785152 720089 720086

257 37 8

Photocell Set: also reguires Photocell Metal Housing or Photocell Plastic Housing

Voltage Part Number

Price

FAAC single channel FAAC single button FAAC two button FAAC tuned antenna kit

1 lb (.5 kg) 1 lb (.5 kg) 1 lb (.5 kg) 2 lb (1 kg)

1RP418DS 1TM418DS 787317 412003

68 38 45 75

Loop Detector Loop Detector Loop Detector

DSP 15 DSP II; plugs in control panel backplate DSP 10; plugs in control panel backplate & has sensitivity adjustment

1 lb (.5 kg) 1 lb (.5 kg) 1 lb (.5 kg)

2664 2665 2667

200 120 130

Shadow Detector kit (DPS 11)

Includes one detector, base, and relay for shadow loop

1 lb (.5 kg)

115V 230V

2665.1* 2665.2*

180 180

Shadow Detector kit (SP 10)

Includes one detector, base, and relay for shadow loop

1 lb (.5 kg)

115V 230V

2667.1* 2667.2*

190 190

Mag Lock Relay Kit

Includes base & relay for mag lock

2352

Battery Backup

BC Pro Single system backup BC Pro Dual system backup

45 lb (16.8 kg) 115V 45 lb (16.8 kg) 115V

3520 3522

1,558 1,768

Control panel

455D (replacement only)

3 lb (1.4 kg)

790919 790926 455D115F* 455D220F*

630 630 1,055 1,055

455D w/ 14 x 16 in fiberglass, hinged, lockable enclosure

115V 230V 26 lb (11.8kg) 115V 230V

Option #1

170

Receiver Transmitter Transmitter Antenna

24V ac

Model 415 operators require a Model 455 D control panel, which can operate a single leaf or master slave gate system.

Model 455D control panel in 10x12 in. enclosure

Option #2

Model 455D control panel in 14x16 in. pre-wired enclosure

* Measurements and weights stated in this Price List are approximate and subject to change without notice. For exact specifications, please refer to the Installation Manual or contact our technical department at 1-800-221-8278.

Model 415 Electromechanical Swing Gate Operator

FAAC Model BC Pro 1050 and Model 700i battery back-up units Specifications

BC Pro 1050

700i

Size: Weight: Input/Output voltage: Input/Output frequency: Output VA: Output watts: Recharge rate to 90%:

14 x 16 x 6 in. (35.6 x 40.6 x 15.2 cm) 45 lbs. (16.8 kg) 115 VAC 230 VAC 60 Hz 50/60 Hz 1050 700 680 450 2-4 hours

Maximum surge current:

36,000 amps

160*

Low volt switch to battery: Max amp. draw:

94 VAC 5 amp.

190 VAC 3 amp.

Shipping Weight: Part Number: Price:

3520 $1,558

3521 $1,558

3522 $1,768

3523 $1,768

*AC suppression joule/amp ratings

FAAC Photobeam Systems Photobeam Photocell Set

Designed for wall mounting or for mounting in special extruded aluminum mounting posts.

Features:

Dual Configuration: Dual System Part Number: Price:

Photobeam Mounting Posts (Standard and Double) Photobeam Mounting Post and Foundation Plate for Photobeam Set

Features: .Anodized aluminum

.Directional photocell with

. Standard post: 22 in. high (57.5 cm)

diagonal alignment

. Double post (holds photobeam and control switch): 44 in. (111.5 cm) 401035

. Angle of detection: +- 4 degrees . Range: 100 ft (30 m)

45 lbs. (16.8 kg)

Photobeam Set

. Obstacle detection time: 10 ms

NOTE: Photobeam sets require 2 posts

737630*

3.54 in. (9 cm)

. Housing protection IP 54

2.75 in. (7 cm)

. Required power supply: 24-35 VDC (available on FAAC control panels) 2.38 in. (5.8 cm) 2.38 in. (5.8 cm)

3.75 in. (9.5 cm)

. Output relay: N.O. (Normally Opened) and N.C. (Normally Closed)

4.5 in. (11.5 cm)

. Output relay rating: 100 MA/24VDC

. Receiver and Transmitter provide reliable all-weather sensing Dimensions: 2.75 in. x 3.75 in. x 1.75 in. (7 cm x 9.5 cm x 4.5 cm) * Measurements and weights stated in this Price List are approximate and subject to change without notice. For exact specifications, please refer to the Installation Manual or contact our technical department at 1-800-221-8278.

401028 737630* Mounting Post Footprint

Model 415 Electromechanical Swing Gate Operator Model 455D control panel

To simplify understanding of the new detector layout, the Model 455 D backplate is shown here with control panel, outlet switch, test button and appropriate terminal strips. Also shown are the new "free exit" and "safety" loop detector plug-in bases. These will come as diagramed with all enclosures. The shadow loop detector can be added as an option. The shadow kit is comprised of another base, detector, and relay. These items are shown in the diagram within the bold, broken line section with instructions below.

Model 455D control panel

Detail of control panel schematic

Visit us online at

www.faacusa.com

Hydraulic Swing Gate Operator

Model 400

.Designed for heavy duty applications

. Two year limited warranty (see back cover)

Model 400 Hydraulic Swing Gate Operator The Model 400 heavy duty operator is designed specifically for situations needing maximum versatility such as apartment, subdivision, commercial/industrial and residential applications.

. Adjustable hydraulic pressures to control force . Minimized pinch points . Available hydraulic locking of the gate available in open and/or closed position . Quiet operation . Self-lubricating for long life . Maximum leaf length: 22 ft (6.7 m) - see chart below . Maximum leaf weight: 2000 lb (907 kg) - see chart below . Maximum cycles per hour: 80 . Two year warranty (see back cover)

Model 400

Model 400 manual release

Definitions: CBAC: hydraulic locking open & closed; normal swing speed CBA/CBC: hydraulic locking open/closed; normal swing speed SB: without hydraulic locking; normal swing speed SBS: without hydraulic locking; slower swing speed Max. Version Leaf Length CBACR 400 12 ft (3.6 m) CBAC 400 16 ft (4.9 m) CBAC 400 EG 18 ft (5.5 m) SB 400 18 ft (5.5 m) SB 400 EG 20 ft (6.1 m) SBS 400 20 ft (6.1 m) SBS 400 EG 22 ft. (6.7 m)

Max. Leaf Weight 900 lb (408 Kg) 1300 lb (589.7 Kg) 1500 lb (680.4 Kg) 1600 lb (725.8 Kg) 1800 lb (816.5 Kg) 2000 lb (907.2 Kg 2200 lb (998 Kg)

Time to Travel 90° 12 sec 17 sec 18 sec 17 sec 18 sec 23 sec 27 sec

Max. Angle of Opening 115° 115° 125° 115° 125° 115° 125°

Cycles Per Hour 80 80 80 80 80 50 50

Shipping Weight 29 lb (13.2 kg) 29 lb (13.2 kg) 34 lb (15.4 kg) 29 lb (13.2 kg) 34 lb (15.4 kg) 29 lb (13.2 kg) 34 lb (15.4 kg)

Operator Locking Inward Swing Position Opened Closed • •

Outward Swing Position Opened Closed

• •

NOTE: To simplify ordering the right Model 400 that will work best for your application, you only need to answer one basic question: What is the maximum length of the gate leaf? All models listed can be converted to CBAC, CBC, SB or SBS upon request. Positive Gate Stops, which limit gate travel, are required in the opened and closed positions, see page 32. CUSTOM PRE-WIRES AVAILABLE

Model 400 A

Ideal for complex applications like gated communities that require many peripherals.

B 4.45

in.

(11.

3 cm )

3.3

Standard A B C

These enclosures are metal, hinged and lockable

. Everything the system needs fits into one box, including entry/exit (Double or Triple) and even battery back up (Triple only), eliminating multiple enclosures . Troubleshooting is simplified with everything in one box

C 5 i n.

Double Pre-wire: 24” H x 24” W x 10” D Triple Pre-wire: 24” H x 36” W x 12” D

For pricing information, call FAAC at 1-800-221-8278.

(8.

5 c m)

40.5 in. (103.1 cm) 27.5 in. (70 cm) 10.25 in. (26 cm)

Extended Geometry (EG) 50.5 in. (128.5 cm) 32.4 in. (82.2 cm) 15 in. (38. cm)

NOTE: FAAC hydraulic operators are not recommended for use on solid-faced gates which are subject to gusty and/or high wind situations. Solid-faced is defined as 50% or more of the gate being solid. If you still have questions regarding your specific installation, please contact our technical department at 1-800-221-8278.

* Mounting dimensions, wind factor and gate design will affect performance specifications * Duty cycle is measured in an ambient temperature of 72 degrees F (20 degrees C) and 115 or 230VAC. Variations in temperature and fluctuation of voltages will also affect duty cycle. * An electric or magnetic lock is recommended for any gate longer than 12 feet (3.7 m).

Model 400 Hydraulic Swing Gate Operator Model Description

Package Includes

Shipping Wt. Voltage Part No. Price

400 CBAC Standard Basic Single Kit

400 CBAC operator, 455D control panel, pre-wired14x16 enclosure

54 lb (24.5.kg) 115V 230V

10420112.5* 1042011.5*

400 CBACR Rapid Basic Single Kit

400 CBACR operator, 455D control panel, 54 lb (24.5.kg) 115V 230V pre-wired 14x16 enclosure

10420712.5* 1042071.5*

400 CBAC EG (long) Basic Single Kit

400 CBAC EG operator, 455D control panel, 54 lb (24.5.kg) 115V 230V pre-wired 14x16 enclosure

10420212.5* 1042021.5*

$2,525 2525

You can upgrade from our 14 X16 pre-wired enclosure to our 20 X16 metal pre-wired enclosure for only $100.00 net more.

2650 2650 2725 2725

To make the above a master/slave (bi-parting) system, use the following:

Model Description

Package Includes

Shipping Wt. Voltage Part No. Price

400 CBAC Standard Operator only

Use to make the single kit into a master/slave, or use to order replacement operator.

29 lb (13.2 kg)

115V 230V

10420112 1042011

$1,645 1,645

400 CBACR Rapid Operator only

29 lb (13.2 kg)

400 CBAC EG Operator Only

34 lb (15.4 kg)

115V 230V 115V 230V

10420712 1042071 10420212 1042021

1745 1745 1866 1866

Model 455D control panel

To complete your gate system, or for replacement purposes, the following accessories can be ordered:

Accessory

Description

Shipping Weight

Photobeam

Directional with diagonal alignment;

2 lb (1 kg)

785163

$210

Photobeam Mounting Post: Standard Photobeam Mounting Post: Double

Foundation plate included

5 lb (2.2 kg)

105

Foundation plate included

9 lb (4.1 kg)

401028/ 737630* 401035/ 737630*

2 lb (1 kg) 3 lb (1.4 kg) 2 lb (1 kg)

785152 720089 720086

257 37 8

1 lb (.5 kg) 1 lb (.5 kg) 1 lb (.5 kg) 2 lb (1 kg)

1RP418DS 1TM418DS 787317 412003

Photocell Set: also reguires Photocell Metal Housing or Photocell Plastic Housing Receiver Transmitter Transmitter Antenna

FAAC single channel FAAC single button FAAC two button FAAC tuned antenna kit

Loop Detector Loop Detector Loop Detector

DSP 15 1 lb (.5 kg) DSP II; plugs in control panel backplate 1 lb (.5 kg) DSP 10; plugs in control panel backplate 1 lb (.5 kg) & has sensitivity adjustment

Shadow Detector kit

Includes one detector, base, and

1 lb (.5 kg)

relay for shadow loop 1 lb (.5 kg)

Voltage Part Number

Price

170

68 38 45 75

2664 2665 2667

200 120 130

115V

2665.1*

180

230V

2665.2*

180

115V 230V

2667.1* 2667.2*

190 190

24V ac

2352

Shadow Detector kit (SP 10)

Includes one detector, base, and relay for shadow loop

Mag Lock Relay Kit

Includes base & relay for mag lock

Positive Stop

Mdl 84, 4-rod internal stop, 400 Std. Mdl 84, 4-rod internal stop, 400 EG

4 lb (1.8 kg) 4 lb (1.8 kg)

Battery Backup

BC Pro Single system backup BC Pro Dual system backup 700i Single system backup 700i Dual system backup

45 lb (16.8 kg) 45 lb (16.8 kg) 45 lb (16.8 kg) 45 lb (16.8 kg)

115V 115V 230V 230V

3520 3522 3521 3523

1,558 1,768 1,558 1,768

Control panel

455D (replacement only)

3 lb (1.4 kg)

455D w/ 14 x 16 in fiberglass, hinged, lockable enclosure 455D w/20x16 metal, hinged enclosure

26 lb (11.8kg)

115V 230V 115V 230V 115V 230V

790919 790926 455D115* 455D220F* 455D115A* 455D230A*

630 630 1,055 1,055 1264 1264

490109 490043

42 195 195

Model 400 operator requires a Model 455D control panel, which can operate a single leaf or master slave gate system. The 455D has a convenient reference diagram on the inside cover. The 455 D has the following functions and features: . Operates a single leaf or a bi-parting gate . Provides opening and closing "slow down, soft stop" convenience . Power supply: 115 VAC (+/- 10%) or 230 VAC (+6% -10%) 50-60 HZ) . Absorbed power: 10W . Motor max load: 800W . Accessories max load: .5 amp . Electric lock max load: 15 Va . Operating temperature: -78oF to +131oF . Protection fuses: .800 mA (accessories) 5 amp (motors) . Operating logics: A (automatic): signal to open, gate closes automatically after selected timed pause S (security): similar to A logic, useful in reducing tailgating E (semi-automatic): garage door-like operation; signal to open, signal to close EP (semi-automatic): similar to E logic, but second signal stops gate, third signal reverses gate B (manned, pulsed): designed for guard station use, requires 3-button switch (pulsed) to open, close and stop gate C (manned, constant): similar to B logic, but 3-button switch requires constant pressure on each button . Opening/closing time: 0 to 120 seconds (programmable) . Pause time: 0 to 4 minutes (programmable) . Closing leaf delay: 0 to 4 minutes (programmable) . Opening leaf display: 2 seconds (can be disabled) . Torque: adjustable from 0 to 50 levels . On board programming via push button

. Easy interconnection of actuating and reversing devices . Open/Hold open function

Model 400 Hydraulic Swing Gate Operator Positive Stops (concealed)

. Stainless steel construction . Does not compromise the integrity of the operator . Mounts with existing FAAC hardware and does not require additional mounting points . Model 84 is totally hidden under the operator cover

Stop-O-Matic Model 84 This heavy duty, adjustable concealed stop is designed specifically for the Model 400 swing operator equipped with a front flange and mounting studs. It mounts to the operator with four bolts and is built with four oversized, threaded rods. On older Model 400 operators now in service, the front flange can be replaced to accept the Model 84 stop.

Features: . Designed for Model 400 standard, rapid and long gate mounted operators with a front flange equipped with mounting studs

. Accommodates inward or outward swinging gates with no additional fabrication . Fully adjustable, opened and closed positions . Maximum degrees of swing: 115 degrees - Model 400 standard 125 degrees - Model 400 long . Maximum leaf weight: 1,300 pounds (Standard) 1500 puonds (EG)

FAAC Model BC Pro 1050 and Model 700i battery back-up units Specifications

BC Pro 1050

700i

Size: Weight: Input/Output voltage: Input/Output frequency: Output VA: Output watts: Recharge rate to 90%:

14 x 16 x 6 in. (35.6 x 40.6 x 15.2 cm) 45 lbs. (16.8 kg) 115 VAC 230 VAC 60 Hz 50/60 Hz 1050 700 680 450 2-4 hours

Maximum surge current:

36,000 amps

160*

Low volt switch to battery: Max amp. draw:

94 VAC 5 amp.

190 VAC 3 amp.

Shipping Weight: Part Number: Price:

3520 $1,558

3521 $1,558

3522 $1,768

3523 $1,768

*AC suppression joule/amp ratings

Dual Configuration: Dual System Part Number: Price:

45 lbs. (16.8 kg)

Model 400 Hydraulic Swing Gate Operator FAAC Photobeam Systems

401035 737630*

Photobeam Set 401028 737630*

Photobeam Photocell Set Designed for wall mounting or for mounting in special extruded aluminum mounting posts.

Photobeam Mounting Posts (Standard and Double) Photobeam Mounting Post and Foundation Plate for Photobeam Set

Features: Features:

. Directional photocell with diagonal alignment

. Anodized aluminum

. Angle of detection: +- 4 degrees

. Standard post: 22 in. high (57.5 cm)

. Range: 100 ft (30 m) . Obstacle detection time: 10 ms

. Double post (holds photobeam and control switch): 44 in. (111.5 cm)

. Housing protection IP 54

NOTE: Photobeam sets require 2 posts

. Required power supply: 24-35 VDC (available on FAAC control panels)

3.54 in. (9 cm) 2.75 in. (7 cm)

. Output relay rating: 100 MA/24VDC

. Receiver and Transmitter provide reliable all-weather sensing

2.38 in. (5.8 cm)

3.75 in. (9.5 cm)

4.5 in. (11.5 cm)

. Output relay: N.O. (Normally Opened) and N.C. (Normally Closed)

2.38 in. (5.8 cm)

Mounting Post Footprint

. Dimensions: 2.75 in. x 3.75 in. x 1.75 in. (7 cm x 9.5 cm x 4.5 cm)

Model 400 Hydraulic Swing Gate Operator Model 455D control panel

Model 455D control panel

Detail of control panel schematic

Visit us online at

www.faacusa.com

Model 402 & 422

Model 402 & 422 Hydraulic Swing Gate Operators

.Designed for light duty gate systems . Two year limited warranty (see back cover)

Model 402

422 Hydraulic Swing Gate Operators

The Models 402 and 422 are designed for light-duty gate systems and are not recommended for solid gates. . Adjustable hydraulic pressures to control swing . Minimized pinch points . Hydraulic locking of the gate available in opened and or closed position . Quiet operation . Self-lubricating for long life . Two year warranty (see back cover) (Note: Positive Gate Stops, which limit gate travel, are required in the opened and closed positions, see page 42.)

Model 402

. . . . . .

Model 422

. . . . . . . .

12 second swing to clear 90o Locking in both directions available Easy installation and maintenance Swivel attachment to front bracket Oil can be checked without removing operator from gate Maximum leaf length: 10 ft (3 m) Maximum leaf weight: 900 lb (410 kg) Maximum cycles per hour: 30

)

FAAC’s most economical hydraulic operator 12 second swing to clear 90o. Locks in the opened or closed positions (CBA/CBC) Maximum leaf length: 10 ft (3 m) Maximum leaf weight: 900 lb (410 kg) Maximum cycles per hour: 30

3.3 (8. 5 in. 5 c m)

)

8 (9

4. (11 45 in. .3 cm)

in 45 ) 9. 4 cm (2

in.

(6.

1 c m)

Model 422

Model 402 is FAAC’s most economical gate mounted hydraulic operator.

Model 402 manual release The Model 422 features hydraulic locking in both the opened and closed positions. It has a keyed manual release.

)

7 7.

. in

Model 422 manual release

)

. 66

CUSTOM PRE-WIRES AVAILABLE

(

3.3 (8. 5 in. 5 c m)

in 45 ) 9. 4 cm (2

Ideal for complex applications like gated communities that require many peripherals. Double Pre-wire: 24” H x 24” W x 10” D Triple Pre-wire: 24” H x 36” W x 12” D

These enclosures are metal, hinged and lockable

in.

For pricing information, call FAAC at 1-800-221-8278. (6.

1 c m)

Model 402 * Measurements and weights stated in this Price List are approximate and subject to change without notice. For exact specifications, please refer to the Installation Manual or contact our technical department at 1-800-221-8278.

NOTE: FAAC hydraulic operators are not recommended for use on solidfaced gates which are subject to gusty and/or high wind situations. Solidfaced is defined as 50% or more of the gate being solid. If you still have questions regarding your specific installation, please contact our technical department at 1-800-221-8278.

Model 402 & 422 Hydraulic Swing Gate Operators Model Description

Package Includes

Shipping Weight

Voltage Part Number

Price

402 CBC Standard Basic Single Kit

402 CBC operator, 455D control panel, 14x16 pre-wired enclosure

39 lb (17.7 kg)

115V 230V

1044682.5* 1044681.5*

$2010 2010

422 CBAC Standard Basic Single Kit

422 CBAC operator, 455D control panel, 39 lb (17.7 kg) 14x16 pre-wired enclosure

115V 230V

10420012.5* 1042001.5*

2,320 2,320

To make the above a master/slave (bi-parting) system, use the following:

Model Description 402 CBC Standard Operator Only

Package Includes Use to make the single kit into a master/slave, or use to order replacement operator.

422 CBAC Standard Operator Only

Shipping Weight

Model 455D control panel

Voltage Part Number

Price

22 lb (10 kg)

115V 230V

1044682 1044681

$1,159 1,159

22 lb (10 kg)

115V 230V

10420012 1042001

1,383 1,383

To complete your gate system, or for replacement purposes, the following accessories can be ordered:

You can upgrade from the 14 X16 to a 20 X16 metal pre-wired enclosure for only $100.00 net more.

Accessory

Description

Shipping Weight

Photobeam

Directional with diagonal alignment; required for UL-325 compliance.

2 lb (1 kg)

785163

$210

Photobeam Mounting Post: Standard Photobeam Mounting Post: Double

Foundation plate included

5 lb (2.2 kg)

105

Foundation plate included

9 lb (4.1 kg)

401028/ 737630* 401035/ 737630*

Photocell Set: also reguires Photocell Metal Housing or Photocell Plastic Housing

2 lb (1 kg) 3 lb (1.4 kg) 2 lb (1 kg)

785152 720089 720086

1 lb (.5 kg) 1 lb (.5 kg) 1 lb (.5 kg) 2 lb (1 kg)

1RP418DS 1TM418DS 787317 412003

Receiver Transmitter Transmitter Antenna

FAAC single channel FAAC single button FAAC two button FAAC tuned antenna kit

Loop Detector Loop Detector Loop Detector

DSP 15 1 lb (.5 kg) DSP II; plugs in control panel backplate 1 lb (.5 kg) DSP 10; plugs in control panel backplate 1 lb (.5 kg) & has sensitivity adjustment

Shadow Detector kit

Includes one detector, base, and relay for shadow loop

1 lb (.5 kg)

Shadow Detector kit (SP 10)

Includes one detector, base, and relay for shadow loop

1 lb (.5 kg)

Mag Lock Relay Kit

Voltage Part Number

Includes base & relay for mag lock

Price

170 257 37 8 68 38 45 75

2664 2665 2667

200 120 130

115V 230V

2665.1* 2665.2*

180 180

115V 230V

2667.1* 2667.2*

190 190

24V ac

2352

3554 3555

166 166

Positive Stop

Mdl 80-402 Concealed Mdl 80-422 Concealed

4 lb (1.8 kg) 4 lb (1.8 kg)

Battery Backup

BC Pro Single system backup BC Pro Dual system backup 700i Single system backup 700i Dual system backup

45 lb (16.8 kg) 45 lb (16.8 kg) 45 lb (16.8 kg) 45 lb (16.8 kg)

115V 115V 230V 230V

3520 3522 3521 3523

1,538 1,748 1,538 1,748

Control panel

455D (replacement only)

3 lb (1.4 kg)

455D w/ 14 x 16 in fiberglass, hinged, lockable enclosure 455D w/20x16 metal, hinged enclosure

26 lb (11.8kg)

115V 230V 115V 230V 115V 230V

790919 790926 455D115F* 455D220F* 455D115A* 455D230A*

630 630 1,055 1,055 1264 1264

Model 402/422 operators require a Model 455D control panel, which can operate a single leaf or master slave gate system. The 455D has a convenient reference diagram on the inside cover.

The 455D has the following functions and features: . Operates a single leaf or a bi-parting gate . Provides opening and closing "slow down, soft stop" convenience . Power supply: 115 VAC (+/- 10%) or 230 VAC (+6% -10%) 50-60 HZ) . Absorbed power: 10W . Motor max load: 800W . Accessories max load: .5 amp . Electric lock max load: 15 Va . Operating temperature: -78oF to +131oF . Protection fuses: .800 mA (accessories) 5 amp (motors) . Operating logics: A (automatic): signal to open, gate closes automatically after selected timed pause S (security): similar to A logic, useful in reducing tailgating E (semi-automatic): garage door-like operation; signal to open, signal to close EP (semi-automatic): similar to E logic, but second signal stops gate, third signal reverses gate B (manned, pulsed): designed for guard station use, requires 3-button switch (pulsed) to open, close and stop gate C (manned, constant): similar to B logic, but 3-button switch requires constant pressure on each button . Opening/closing time: 0 to 120 seconds (programmable) . Pause time: 0 to 4 minutes (programmable) . Closing leaf delay: 0 to 4 minutes (programmable) . Opening leaf display: 2 seconds (can be disabled) . Torque: adjustable from 0 to 50 levels . On board programming via push button . Easy interconnection of actuating and reversing devices . Open/Hold open function * Measurements and weights stated in this Price List are approximate and subject to change without notice. For exact specifications, please refer to the Installation Manual or contact our technical department at 1-800-221-8278.

Model 402 & 422 Hydraulic Swing Gate Operators Positive Stops (concealed)

Stop-O-Matic Model 80 shown in open and closed positions. This adjustable gate stop is attached to the operator front flange by two socket head screws. Once the open and closed stop adjustments are set, the protective cover is slid over the stop and secured with an end cap and screws.

. Stop is totally concealed under operator cover . Accommodates Inward or Outward Swing with no additional fabrication . Maximum degrees of swing: Limited by operator . Maximum leaf length: Limited by operator . Maximum leaf weight: Limited by operator

The Model 80 can be added to an operator at any time.

Features: . For FAAC models 402 and 422 . Steel construction . All versions mount with existing FAAC hardware and require no additional attachment points

NOTE: Model 80 is not recomended for use in high wind situations.

FAAC Model BC Pro 1050 and Model 700i battery back-up units Specifications

BC Pro 1050

700i

Size: Weight: Input/Output voltage: Input/Output frequency: Output VA: Output watts: Recharge rate to 90%:

14 x 16 x 6 in. (35.6 x 40.6 x 15.2 cm) 45 lbs. (16.8 kg) 115 VAC 230 VAC 60 Hz 50/60 Hz 1050 700 680 450 2-4 hours

Maximum surge current:

36,000 amps

160*

Low volt switch to battery: Max amp. draw:

94 VAC 5 amp.

190 VAC 3 amp.

Shipping Weight: Part Number: Price:

3520 $1,558

3521 $1,558

3522 $1,768

3523 $1,768

*AC suppression joule/amp ratings

45 lbs. (16.8 kg)

Dual Configuration: Dual System Part Number: Price:

Model 402 & 422 Hydraulic Swing Gate Operators FAAC Photobeam Systems

401035 737630*

Photobeam Set 401028 737630*

Photobeam Photocell Set Designed for wall mounting or for mounting in special extruded aluminum mounting posts.

Photobeam Mounting Posts (Standard and Double) Photobeam Mounting Post and Foundation Plate for Photobeam Set

Features:

. Directional photocell with diagonal alignment

. Anodized aluminum

. Angle of detection: +- 4 degrees

. Standard post: 22 in. high (57.5 cm)

. Range: 100 ft (30 m) . Obstacle detection time: 10 ms . Housing protection IP 54

. Double post (holds photobeam and control switch): 44 in. (111.5 cm) NOTE: Photobeam sets require 2 posts

. Required power supply: 24-35 VDC (available on FAAC control panels)

3.54 in. (9 cm) 2.75 in. (7 cm)

. Output relay rating: 100 MA/24VDC

. Receiver and Transmitter provide reliable all-weather sensing . Dimensions: 2.75 in. x 3.75 in. x 1.75 in. (7 cm x 9.5 cm x 4.5 cm)

2.38 in. (5.8 cm)

3.75 in. (9.5 cm)

4.5 in. (11.5 cm)

. Output relay: N.O. (Normally Opened) and N.C. (Normally Closed)

2.38 in. (5.8 cm)

Mounting Post Footprint

Model 402

422 Hydraulic Swing Gate Operators

Model 455D control panel

Detail of control panel schematic

Visit us online at

www.faacusa.com

In-Ground Swing Hydraulic Gate Operators

.Designed for residential applications

Model 750

. Two year limited warranty (see back cover)

Model 750 In-Ground Hydraulic Swing Gate Operators UL 325

The Model 750 provides an “invisible” installation by placing the drive unit below ground. Model 750 gate operators features: . Hydraulic operation . Adjustable hydraulic pressures to control swing . Minimized pinch points . Available hydraulic locking of the gate in position . Quiet operation . Self-lubricating for long life . Opening of up to 180 degrees . Maximum leaf length: 13 ft (4 m) . Maximum leaf weight: 1500 lb (680 kg) . Two year warranty (see back cover) Note: Positive Gate Stops, which limit gate travel, are required in the opened and closed positions.

Model 750

Model 750 operators require the 455 D control panel which will operate a single leaf or a master/slave gate. . Control panels may be purchased separately.

The 455 D Control Panel . UL 325 compliant . Provides “slow down” feature on open and close, at any position for all FAAC hydraulic operators plus Model 412 High Voltage version and Model 415 electromechanical swing gate operator. . Fully programmable using built-in push buttons, LED screen and easy-to-follow instructions

Model 455D control panel and pre-wired enclosure

CUSTOM PRE-WIRES AVAILABLE Ideal for complex applications like gated communities that require many peripherals. Double Pre-wire: 24” H x 24” W x 10” D

These enclosures are

Triple Pre-wire: 24” H x 36” W x 12” D

metal, hinged and lockable

. Everything the system needs fits into one box, including entry/exit (Double orTriple) and even battery back up (Triple only), eliminating multiple enclosures. Troubleshooting is simplified with everything in one box

Choice of Actuator Abbreviations: CBAC = hydraulic locking opened and closed; normal swing speed CBA/CBC = hydraulic locking in the closed/open position; normal swing speed SB = without hydraulic locking; normal swing speed

. Model 750 pump can be included (Tripple only)

For pricing information, call FAAC at 1-800-221-8278. NOTE: All models listed can be converted to CBA, CBC or SB upon request.To simplify ordering the right 750 model that will work best for your application, you only need to answer two simple questions: 1. What is the maximum length of your gate leaf: < 8 ft (2.4 m) (CBAC) or > 9 ft (2.7 m) (SB) up to a max. of 13 ft (4 m) 2. What degree of swing do you need: 110o or 180o

Model 750 In-Ground Hydraulic Swing Gate Operators The Model 750 hydraulic system consists of a control panel and four hydraulic component groups: 1.

in. 3.17 cm) (8.1

. 5.5 in m) c (14.2

9.67 in (24.6 . cm)

13.9 in. (35.3 cm)

Model 455D control panel and 14x16 in. pre-wired enclosure

The 750 Pump Motor Assembly and enclosure, which is available with or without hydraulic locking.

455 D Control panel and enclosure

. One or two Pump Motor Assemblies . One or two 33 ft (10 m) lengths of flex hose and one or two connector kits. . One or two Drive Units with metal enclosure and top . One or two foundation plates . 455 D Control Panel & Enclosure.

Control Panel 7.88 in. (20 cm)

Pump Motor

6 in. (1 5.2 cm )

4.81 in . (12.2 cm)

) .2 cm . (40 1 in 8 . 5 1

The 750 Drive Unit (with metal enclosure and top) is available in both a 110o swing or a 180o swing version.

Attaches to the bottom of the gate

New!

Side View

4. Slides through side channel as gate swings

Top View

750/760 collar

Positive stops (included with part # 2142)

Foundation plate on which the Drive Unit is placed.

The 750/760 extension arm with built-in positive stops (optional)

Model 750 In-Ground Hydraulic Swing Gate Operators Model Description

Shipping Weight

Voltage

Maximum Leaf Length

Maximum Leaf Weight

Part Number

Price

750 Pump Motor Assembly (Includes hydraulic pump enclosure)

12 lb (5.4 kg)

115VAC 230VAC

13 ft (4 m) 13 ft (4 m)

1500 lb (680 kg) 1500 lb (680 kg)

107725 1077251

$921 921

750 110oo Drive Unit with metal enclosure and top 750 180 Drive Unit with metal enclosure and top

26 lb (11.8 kg) 26 lb (11.8 kg)

13 ft (4 m) 13 ft (4 m)

1500 lb (680 kg) 1500 lb (680 kg)

108757 108758

954 1100

455D control panel with 14 x 16 pre-wired enclosure

26 lb (11.8 kg) 26 lb (11.8 kg)

455D115F* 455D220F*

1055 1055

115VAC 230VAC

To complete your gate system, or for replacement purposes, the following accessories can be ordered:

Accessory

Description

Shipping Weight Voltage

Part Number Price

Foundation Plate

Each 750 Drive Unit must be on a foundation plate.

11 lb (5 kg)

737607

$55

Flex Hose Connector Kit

The kit includes the required connection hardware to attach the two 2 lb (.9 kg) hoses which run between a pump motor assembly and drive unit.

390421*

Flexible Hydraulic Hose

Length: 33 ft (10m) Outside Diameter: 5/16â&#x20AC;? (8mm). 3 lb (1.4 kg) Length: 328 ft (100m) Outside Diameter: 5/16â&#x20AC;? (8mm). 30 lb (13.6 kg) Also sold by the foot for any length greater then 33 ft.

390422 390439

124

Hydraulic Pump Enclosure (replacement)

3.15 per foot

3 lb (1.4 kg)

720309

750/760 Extension Arm The arm is used when the 750 or 760 drive unit cannot 9 lb (4.1 kg)

738704

100

2 piece

be aligned with the pivot point of the gate leaf.

750/760 Extension Arm The arm is used when the 750 or 760 drive unit cannot 9 lb (4.1 kg) 3 piece be aligned with the pivot point of the gate leaf.

2141

750/760 Extension Arm For alignment problems plus provides positive stops with positive stops 2 piece

10 lb (4.5 kg)

2142

212

Photobeam

Directional with diagonal alignment; required for UL-325 compliance.

2 lb (1 kg)

785163

210

Photobeam Mounting Post: Standard Photobeam Mounting Post: Double

Foundation plate included

5 lb (2.2 kg)

105

Foundation plate included

9 lb (4.1 kg)

401028/ 737630* 401035/ 737630*

100

170

Photocell Set: also reguires Photocell Metal Housing or Photocell Plastic Housing Receiver FAAC single channel Transmitter FAAC single button Transmitter FAAC two button Antenna FAAC tuned antenna kit

2 lb (1 kg) 3 lb (1.4 kg) 2 lb (1 kg) 1 lb (.5 kg) 1 lb (.5 kg) 1 lb (.5 kg) 2 lb (1 kg)

785152 720089 720086 1RP418DS 1TM418DS 787317 412003

257 37 8 68 38 45 75

Loop Detector Loop Detector Loop Detector

DSP 15 DSP II; plugs in control panel backplate DSP 10; plugs in control panel backplate & has sensitivity adjustment

1 lb (.5 kg) 1 lb (.5 kg) 1 lb (.5 kg)

2664 2665 2667

200 120 130

Shadow Detector kit

Includes one detector, base, and relay for shadow loop

1 lb (.5 kg)

2665.1* 2665.2*

180 190

Mag Lock Relay Kit

Includes base & relay for mag lock

Shadow Detector kit (SP 10)

Includes one detector, base, and relay for shadow loop

1 lb (.5 kg)

115V 230V

2667.1* 2667.2*

Battery Backup

BC Pro Single system backup BC Pro Dual system backup 700i Single system backup 700i Dual system backup

45 lb (16.8 kg) 45 lb (16.8 kg) 45 lb (16.8 kg) 45 lb (16.8 kg)

115V 115V 230V 230V

3520 3522 3521 3523

1,558 1,768 1,558 1,768

Control panel

455D (replacement only)

3 lb (1.4 kg)

455D w/ 14 x 16 in fiberglass, hinged, lockable enclosure

26 lb (11.8kg)

115V 230V 115V 230V

790919 790926 455D115F* 455D220F*

630 630 1055 1055

The CBAC version is only available for gate leaf lengths of 8 feet or less. However, for certain applications, it is possible to install the CBAC on longer leaves. For information contact FAAC's technical department at (800) 221-8278.

115V 230V 24V ac

2352

42 240 240

* The Model 750 is not recommended for use on opaque gates. The CBAC and CBC versions are not recommended for use in high wind situations. * Duty cycle is measured in an ambient temperature of 72o F (22o C) and 115 VAC or 230 VAC. Variations in temperature and fluctuations in voltages will affect duty cycle. * An electric or magnetic lock is recommended for any gate longer than 12 ft. (3.7 m). * Operating temperature range: -33o to 165o F (-36o to 74o C). * Positive Gate Stops, which limit gate travel, are required in the opened and closed positions.

455D w/20x16 metal hinged enclosure

115V 455D115A* $1264 230V 455D230A* 1264

Model 750 In-Ground Hydraulic Swing Gate Operators FAAC Model BC Pro 1050 and Model 700i battery back-up units Specifications

BC Pro 1050

700i

Size: Weight: Input/Output voltage: Input/Output frequency: Output VA: Output watts: Recharge rate to 90%:

14 x 16 x 6 in. (35.6 x 40.6 x 15.2 cm) 45 lbs. (16.8 kg) 115 VAC 230 VAC 60 Hz 50/60 Hz 1050 700 680 450 2-4 hours

Maximum surge current:

36,000 amps

160*

Low volt switch to battery: Max amp. draw:

94 VAC 5 amp.

190 VAC 3 amp.

Shipping Weight: Part Number: Price:

3520 $1,558

3521 $1,558

3522 $1,768

3523 $1,768

*AC suppression joule/amp ratings

45 lbs. (16.8 kg)

Dual Configuration: Dual System Part Number: Price:

Model 750 In-Ground Hydraulic Swing Gate Operators FAAC Photobeam Systems

Photobeam Mounting Posts (Standard and Double)

Photobeam Photocell Set Designed for wall mounting or for mounting in special extruded aluminum mounting posts.

Photobeam Mounting Post and Foundation Plate for Photobeam Set

Features:

. Directional photocell with

. Anodized aluminum . Standard post: 22 in. high (57.5 cm) . Double post (holds photobeam and : control switch) 44 in. (111.5 cm) NOTE: Photobeam sets require 2 posts

diagonal alignment . Angle of detection: +- 4 degrees . Range: 100 ft (30 m)

Photobeam Set

. Obstacle detection time: 10 ms . Housing protection IP 54

3.54 in. (9 cm) 2.75 in. (7 cm)

401035 737630*

. Output relay rating: 100 MA/24VDC . Output relay: N.O. (Normally Opened) and N.C. (Normally Closed)

2.38 in. (5.8 cm)

3.75 in. (9.5 cm)

4.5 in. (11.5 cm)

2.38 in. (5.8 cm)

. Required power supply: 24-35 VDC (available on FAAC control panels)

. Receiver and Transmitter provide reliable all-weather sensing Dimensions: 2.75 in. x 3.75 in. x 1.75 in. (7 cm x 9.5 cm x 4.5 cm)

401028 737630* Mounting Post Footprint

Model Description

Package Includes

Shipping Weight

Voltage

Part Number

Price

Photobeam Mounting Post Standard

Foundation plate included

5 lb (2.2 kg)

401028/ 737630*

$105

Photobeam Mounting Post Double

Foundation plate included

9 lb (4.1 kg)

401035/ 737630*

170

Model 750 In-Ground Hydraulic Swing Gate Operators

Model 455D control panel

Detail of control panel schematic

Visit us online at

www.faacusa.com

Model 760 In-Ground Hydraulic Swing Gate Operators

Model 760

.Designed for residential applications . Two year limited warranty (see back cover)

Model 760 In-Ground Hydraulic Swing Gate Operators UL 325

The Model 760 offers many of the benefits of the Model 750, along with the special feature of having the drive and power units combined together in-ground.

Model 760 gate operators features: . Hydraulic actuation . Adjustable hydraulic pressures to control swing . Minimized pinch points . Available hydraulic locking of the gate in position . Quiet operation . Self-lubricating for long life . Opening of up to 148 degrees . Maximum leaf length: 13 ft (4 m) . Maximum leaf weight: 1500 lb (680.4 kg)

Fea t Sof uring t slo S w-d top own .

. Two year warranty (see back cover)

Advantages: . Less stress on the gate and operator . Smoother operation

However:

Model 760

. If gate swing is less than 90 degrees, soft stop will only operate in the opened or closed position . Slowdown increases total closing time

. 19.3 in

) (49 cm

in. 6.25 cm) (15.9

in. 8.39 cm) (21.3

5 in. 10.2 m) (26 c

Model 455D control panel and pre-wired enclosure Model 760 operators require the 455 D control panel which will operate a single leaf or a master/slave gate. * Measurements and weights stated in this Price List are approximate and subject to change without notice. For exact specifications, refer to the Installation Manual or contact our technical department at 1-800-221-8278. * Wind and gate design will affect performance specifications. * Duty cycle is measured in an ambient temperature of 72 degrees F (20 degrees C) and 115 VAC or 230 VAC. Variations in temperature and flucuations in voltages will affect duty cycle. * An electric or magnetic lock is recommended for any gate longer than 12 ft. (3.7 m). * Operating temperature range: -33 to 165 degrees F (-36 to 74 degrees C) * Positive stops, which limit gate travel, are required in the opened and closed positions.

Model 760 In-Ground Hydraulic Swing Gate Operators The Model 760 system consists of a control panel and 2 or 3 component groups: 1. The Drive-Pump Unit

2. The Load Bearing Box with top

3. And, on CBAC models, the Keyed Manual Release is required.

The 455 D control panel in 14x16 in. pre-wired enclosure

Attaches to the bottom of the gate

Slides through side channel as gate swings

New!

Side View

Top View

The 455 D programmable control panel with LED readout

750/760 collar

Positive stops (included with part # 2142)

The 750/760 extension arm with built-in positive stops (optional)

The 750/760 extension arm.

Model 760 In-Ground Hydraulic Swing Gate Operators 760 Models and Components Model Description

Package Includes 760 operator w/ 455D control panel, 14 x 16 in. pre-wired enclosure & load bearing box

760 Standard Basic Single Kit

Shipping Wt. Voltage Part No. 68 lb (30.8 kg) 2 boxes

115V 230V

1067702.5* 1067701.5*

Price $3,325 3,325

To make the above a master/slave (bi-parting) system, use the following:

Model Description

Package Includes

Shipping Wt. Voltage Part No.

Price

115V 230V

$2,021

760 Standard Operator Only

Use to make the single kit into a master/slave, or use to order replacement operator.

32 lb (14.5 kg)

Load bearing box

Required for all 760 installations

22 lb (10kg)

1067702 1067701

2,021 465

490098

Accessory

Description

Shipping Weight Voltage

Part Number Price

Keyed Manual Release

Required for all 760 installations Access from both sides of gate. Uses FAAC plastic triangular key.

2 lb (.9 kg)

424597

$74

1 lb (.45 kg)

713002

Manual Release Key 750/760 Extension Arm 2 piece

The arm is used when the 750 or 760 drive unit cannot be aligned with the pivot point of the gate leaf.

9 lb (4.1 kg)

738704

100

750/760 Extension Arm 3 piece

The arm is used when the 750 or 760 drive unit cannot be aligned with the pivot point of the gate leaf.

9 lb (4.1 kg)

2141

100

750/760 Extension Arm with positive stops 2 piece

For alignment problems plus provides positive stops

10 lb (4.5 kg)

2142

216

760 Positive Stop Heavy Duty Shaft mounted stop

3 lb (1.4 kg)

2640

186

Photobeam

Directional with diagonal alignment; required for UL-325 compliance.

2 lb (1 kg)

785163

204

Photobeam Mounting Post: Standard Photobeam Mounting Post: Double

Foundation plate included

5 lb (2.2 kg)

105

Foundation plate included

9 lb (4.1 kg)

401028/ 737630* 401035/ 737630*

You can upgrade from our 14 X16 pre-wired enclosure to our 20 X16 metal pre-wired enclosure for only $100.00 net more.

Definitions: The Soft Stop feature requires a gate swing of at least 90 degrees in order to operate at both opening and closing. If gate swing is less than 90 degrees, the Soft Stop feature operates either at opening or at closing, but not at both. Please refer to the 760 Instruction Manual. Duty Cycle assumes 115 or 230 VAC and an ambient temperature of 72oF (22oC). Operating Temperature Range is -33o to 165oF (-36o to 74oC). * The Model 760 is not recommended for use on solid/opaque gates. The CBAC version is not recommended for use in high wind situations. * Positive Gate Stops, which limit gate travel, are required in the opened and closed positions.

170 Model 455D control panel

2 lb (1 kg) 3 lb (1.4 kg) 2 lb (1 kg) 1 lb (.5 kg) 1 lb (.5 kg) 1 lb (.5 kg) 2 lb (1 kg)

785152 720089 720086 1RP418DS 1TM418DS 787317 412003

257 37 8 68 38 45 75

Model 760 operator requires a Model 455D control panel, which can operate a single leaf or master slave gate system. The 455D has a convenient reference diagram on the inside cover.

Loop Detector Loop Detector Loop Detector

DSP 15 DSP II; plugs in control panel backplate DSP 10; plugs in control panel backplate & had sensitivity adjustment

1 lb (.5 kg) 1 lb (.5 kg) 1 lb (.5 kg)

2664 2665 2667

200 120 130

NOTE:

Shadow Detector kit

Includes one detector, base, and relay for shadow loop

1 lb (.5 kg)

115V 230V

2665.1* 2665.2*

180 180

Shadow Detector kit (SP 10)

Includes one detector, base, and relay for shadow loop

1 lb (.5 kg)

115V 230V

2667.1* 2667.2*

190 190

Mag Lock Relay Kit

Includes base & relay for mag lock

24V ac

2352

42 1,558 1,768 1,558 1,768

Battery Backup

BC Pro Single system backup BC Pro Dual system backup 700i Single system backup 700i Dual system backup

45 lb (16.8 kg) 45 lb (16.8 kg) 45 lb (16.8 kg) 45 lb (16.8 kg)

115V 115V 230V 230V

3520 3522 3521 3523

Control panel

455D (replacement only)

3 lb (1.4 kg)

455D w/ 14 x 16 in fiberglass, hinged, lockable enclosure

26 lb (11.8kg)

115V 230V 115V 230V

790919 630 790926 630 455D115F* 1,055 455D220F* 1,055

FAAC hydraulic operators are not recommended for use on solid-faced gates which are subject to gusty and/or high wind situations. Solid-faced is defined as 50% or more of the gate being solid. If you still have questions regarding your specific installation, please contact our technical department at 1-800-221-8278.

455D w/20x16 115V 455D115A* $1264 metal hinged enclosure 230V 455D230A* 1264

Model 760 In-Ground Hydraulic Swing Gate Operators Abbreviations:

NOTE:

CBAC = hydraulic locking opened and closed; normal swing speed CBA/CBC = hydraulic locking in the closed/open position; normal swing speed SB = without hydraulic locking; normal swing speed

All models listed can be converted to CBA, CBC or SB upon request. To simplify ordering the right 760 model that will work best for your application, you only need to answer one simple questions: 1. What is the maximum length of your gate leaf: < 8 ft (2.4 m) (CBAC) or > 9 ft (2.7 m) (SB) up to a max. of 13 ft (4 m)

455 D Control Panel for use with FAAC Hydraulic Swing Gate Operators The 455 D has the following functions and features: . Operates a single leaf or a bi-parting gate

UL 325 Programming LED display

. Provides opening and closing "slow down, soft stop" convenience . Power supply: 115 VAC (+/- 10%) or 230 VAC (+6% -10%) 50-60 HZ) . Absorbed power: 10W . Motor max load: 800W . Accessories max load: .5 amp . Electric lock max load: 15 Va . Operating temperature: -78oF to +131oF . Protection fuses: .800 mA (accessories) 5 amp (motors) . Operating logics: A (automatic): signal to open, gate closes automatically after selected timed pause S (security): similar to A logic, useful in reducing tailgating E (semi-automatic): garage door-like operation; signal to open, signal to close EP (semi-automatic): similar to E logic, but second signal stops gate, third signal reverses gate B (manned, pulsed): designed for guard station use, requires 3-button switch (pulsed) to open, close and stop gate C (manned, constant): similar to B logic, but 3-button switch requires constant pressure on each button . Opening/closing time: 0 to 120 seconds (programmable) . Pause time: 0 to 4 minutes (programmable) . Closing leaf delay: 0 to 4 minutes (programmable)

Programming buttons

. Opening leaf display: 2 seconds (can be disabled) . Torque: adjustable from 0 to 50 levels . On board programming via push button (see circuit board photo this page) . Panel also allows for the use of FAAC Gate Coders, for “real time” tracking of gate position . Easy interconnection of actuating and reversing devices . Open/Hold open function

CUSTOM PRE-WIRES AVAILABLE Ideal for complex applications like gated communities that require many peripherals. Double Pre-wire: 24” H x 24” W x 10” D Triple Pre-wire: 24” H x 36” W x 12” D

These enclosures are metal, hinged and lockable

Model 760 In-Ground Hydraulic Swing Gate Operators

FAAC Model BC Pro 1050 and Model 700i battery back-up units Specifications

BC Pro 1050

700i

Size: Weight: Input/Output voltage: Input/Output frequency: Output VA: Output watts: Recharge rate to 90%:

14 x 16 x 6 in. (35.6 x 40.6 x 15.2 cm) 45 lbs. (16.8 kg) 115 VAC 230 VAC 60 Hz 50/60 Hz 1050 700 680 450 2-4 hours

Maximum surge current:

36,000 amps

160*

Low volt switch to battery: Max amp. draw:

94 VAC 5 amp.

190 VAC 3 amp.

Shipping Weight: Part Number: Price:

3520 $1,558

3521 $1,558

3522 $1,768

3523 $1,768

*AC suppression joule/amp ratings

45 lbs. (16.8 kg)

Dual Configuration: Dual System Part Number: Price:

Model 760 In-Ground Hydraulic Swing Gate Operators FAAC Photobeam Systems

Photobeam Photocell Set

Photobeam Mounting Posts (Standard and Double)

Designed for wall mounting or for mounting in special extruded aluminum mounting posts.

Photobeam Mounting Post and Foundation Plate for Photobeam Set

Features: . Directional photocell with

Features:

diagonal alignment

. Anodized aluminum

. Angle of detection: +- 4 degrees

. Standard post: 22 in. high (57.5 cm) . Double post (holds photobeam and control switch): 44 in. (111.5 cm) NOTE: Photobeam sets require 2 posts

. Range: 100 ft (30 m) Photobeam Set . Obstacle detection time: 10 ms 401035 737630*

. Housing protection IP 54 . Required power supply: 24-35 VDC (available on FAAC control panels)

3.54 in. (9 cm)

. Output relay rating: 100 MA/24VDC

2.75 in. (7 cm)

. Output relay: N.O. (Normally Opened) and N.C. (Normally Closed) . Receiver and Transmitter provide reliable all-weather sensing Dimensions: 2.75 in. x 3.75 in. x 1.75 in. (7 cm x 9.5 cm x 4.5 cm)

2.38 in. (5.8 cm)

3.75 in. (9.5 cm)

4.5 in. (11.5 cm)

2.38 in. (5.8 cm)

401028 737630* Mounting Post Footprint

Model Description

Package Includes

Shipping Weight

Part Number

Price

Photobeam Mounting Post Standard

Foundation plate included

5 lb (2.2 kg)

401028/ 737630*

$105

Photobeam Mounting Post Double

Foundation plate included

9 lb (4.1 kg)

401035/ 737630*

170

Model 760 In-Ground Hydraulic Swing Gate Operators

Model 455D control panel

Detail of control panel schematic

Visit us online at

www.faacusa.com

2006 Price List

Barrier Operators

Contents

Barrier Gate Operators . . . . . . . . . . . . . . 73 Model 615 . . . . . . . . . . . . . . . . . . . . . . . . 74 Model 620 . . . . . . . . . . . . . . . . . . . . . . . . 77 Model 640 . . . . . . . . . . . . . . . . . . . . . . . . 81

Barrier Gate Accessories . . . . . . . . . . . . 85

FAAC Barrier Gate Operators Application

Cycles Per Hour

Normal Traffic 150 High Traffic

Continuous Duty

Max length Aluminum Beam

Model

10 ft

615

13 ft 23 ft

620 640

Barrier Gate Operator

.Designed for light to moderate traffic applications

Model 615

. Two year limited warranty (see back cover)

Model 615

Hydraulic Swing Gate Operators

The Model 615 barriers are designed for light to moderate duty applications. Additional features include: . Price includes wood beam (see page 108) . Adjustable hydraulic pressures to control swing . External key-operated manual release . Simple interface with revenue control systems . Powder coated steel cabinet . Versatile Model 615 BBR control panel . Quiet operation All 615 Models require the following:

. Assembly of the beam . Assembly of the beamâ&#x20AC;&#x2122;s counterbalancing system (assembly determines right- or left-hand orientation) 10.6 in. (27 cm) 5.5 (14 in. cm)

Model 615 BBR Control Panel 40 in. (101.6 cm)

Operating Logics The 615 BBR control panel operates the barrier for applications where automatic close is preferred; for most parking retrofit applications; and for preventing tailgating (S modes): A = Automatic logic: one signal opens the gate and closes it after a timed pause EP = (semi-automatic): similar to E logic, but second signal stops gate, third signal reverses gate. B = (manned, pulsed): designed for guard station use, requires 3-button switch (pulsed) to open, close and stop gate C = (manned, constant): similar to B logic, but 3button switch requires constant pressure on each button

FAAC Model 615 barrier gate operator

Features Common to All 615 Models Hydraulic Locking Positions Cabinet Weight (approx..) Motor Horsepower Power Supply Ambient Operating Temperature Range

Opened & Closed 100 lb (45.5 kg) 1/3 hp 115 or 230 VAC (-10% to +6%) 60 Hz -33oF to 165oF (-36oC to 74oC)

* Measurements and weights stated in this Price List are approximate. For exact specifications, please refer to the Installation Manual or contact our technical department at 1-800-221-8278.

Model 615

Hydraulic Swing Gate Operators

Note: When ordering, please specify desired beam length

Replacement Boards: Model

Voltage Part Number

615 Standard

115 VAC 230 VAC

1049062 1049062

Max Beam Length Wooden

Max Beam Length Aluminum

up to 10 ft (3 m)

up to 13 ft (4 m)

Price

Voltage Part Number Price

Model

$1749 $1749

615 BPR 615 BPR

Speed to Clear 90o

Cycles Per Hour

5 sec

150

115V 220V

Pump Size (liters) 1.5

20228125 790281

$587 $587

Motor RPM

Actual Pump Output (liters)

Control Panel

Shipping Weight

1400

1.5

615 BPR

100 lb (45.5 kg)

Please Note: When ordering, you need to specify the length and type of beam you plan to install so that we can ship the correct counterbalancing spring. Information on Model 615 wooden and aluminum beams can be found on page 88 of this Section. An optional (recommended) foundation plate is available (see page 86).

FYI Beams, because of their size, must be shipped by truck. Freight charges for shipping can be as much or more than the cost of the beam. Please request a freight quote from FAAC to determine total costs.

* Measurements and weights stated in this Price List are approximate. For exact specifications, please refer to the Installation Manual or contact our technical department at 1-800-221-8278.

Visit us online at

www.faacusa.com

Barrier Gate Operators

.Designed for moderate to heavy traffic applications

Model 620

. Two year limited warranty (see back cover)

Model 620

Barrier Gate Operators

UL 325

The U.L. Listed Model 620 barrier gates are designed for moderate to heavy duty applications. The 620 is shipped with the Model 624 MPS control panel and has the following features:

. . . . . . . . .

Continuous duty operation Adjustable hydraulic pressures 4 different operating logics Pre-assembled counterbalanced system Automated fan cooling on all models Pause time selections Selectable warning light logic Quiet operation Fast opening time (2 sec. for 8.5 ft. beam)

Note: An optional (recommended) foundation plate, emergency bypass solenoid, barrier beams, and other accessories are sold separately (see pages 88-93). For information on articulated or skirted beam kits, see page 93.

FAAC Model 620 barrier gate operator

. (35 13.75 in cm)

6.6 (17 9 in. cm)

Please Note: When ordering, you need to specify the length and type of beam you plan to install so that we can ship the correct counterbalancing spring. Information on Model 620 wooden and aluminum beams can be found on page 88 of this Section.

42.5 in. (108 cm) 37.75 in. (101.6 cm) center of beam to grade

An optional (recommended) foundation plate is available (see page 86).

Model 624 BLD Control Panel Operating Logics E = Garage door-like logic: signal to open, signal to close As = Automatic logic: one signal opens the gate and closes it after a timed pause . “A” logic can be set to function as an anti-tailgating logic . With “pre-flashing” selected by the dip switches, the control panel acts typically like other FAAC panels . Without “pre-flashing” selected, the control panel functions more like the “S” logic on other FAAC panels P = For parking applications requiring separate open and close controls; useful in retrofitting parking barrier gate applications R = Master/Slave The slave and relay card functions are now built in to the 624 BLD panel, alleviating the need for the cards altogether. Plug in detectors available; DP2, (p/n 785599) with 2-channel capability, meaning only one detector is needed to handle both free exit and safety

Left-hand installation, top view

Right-hand installation, top view

You must know the orientation of your barrier when ordering a Model 620.

* Measurements and weights stated in this Price List are approximate. For exact specifications, please refer to the Installation Manual or contact our technical department at 1-800-221-8278.

Model 620 Barrier Gate Operators Model 620 Express

. . . . .

FYI

100% duty cycle includes Model 624 BLD control panel automatic cooling fan beam must be ordered separately (see page 88) articulated beam kit available (see page 91)

Orange cabinet

Beams, because of their size, must be shipped by truck. Freight charges for shipping can be as much or more than the cost of the beam. Please request a freight quote from FAAC to determine total costs.

Part Part

White cabinet

Voltage

Number

Price

Number

Price

Beam Length - Wood

Beam Length Aluminum

Left Hand Right Hand

230VAC 230VAC

10463282 10465282

$3,487 $3,487

10463283 10465283

$3,487 $3,487

6.5-10 ft (2-3 m) 6.5-10 ft (2-3 m)

6.5 ft (2 m) 6.5 ft (2 m)

Left Hand Right Hand

230VAC 230VAC

10463382 10465382

$3,487 $3,487

10463383 10465383

$3,487 $3,487

11-14 ft (3.4-3.7 m) 11-14 ft (3.4-3.7 m)

8.5 ft (2.6 m) 8.5 ft (2.6 m)

Left Hand Right Hand

230VAC 230VAC

10463482 10465482

$3,487 $3,487

10463483 10465483

$3,487 $3,487

NA NA

9.75 ft (3 m) 9.75 ft (3 m)

Left Hand Right Hand

230VAC 230VAC

10463582 10465582

$3,487 $3,487

10463583 10465583

$3,487 $3,487

NA NA

13 ft (3.9 m) 13 ft (3.9 m)

Orientation

Speed too Clear 90

Maximum Duty Cycle

Pump Size (liters)

Motor RPM

Actual Pump Output (liters)

Shipping Weight

2.0 sec 2.0 sec

100% 100%

1.0 1.0

2800 2800

2.0 2.0

170 lb (77.1 kg) 170 lb (77.1 kg)

Control Panel (replacement) Description Part No. Price 624 MPS 230 VAC 8uf 202214401 $ 706 624 BLD 230 VAC 63000395 $ 706

Plug-In Loop Detector PIN

Model 620 115 Volt Description While all configurations do not currently have part numbers assigned yet, all can be DP2 2Channel converted from existing part numbers. Simply order the part number shown, if beam size and left/right configuration are correct. Otherwise, order the 620 or 640 with desired beam length and designate left or right, and we will convert to a specific orientation. Orange cabinet

785599

Price $385

White cabinet

Beam Length

$3,487 $3,487

N/A* N/A*

9.75 ft (3 m)) 9.75 ft (3 m)

$3,487 $3,487

N/A* N/A*

13 ft (3.9 m) 13 ft (3.9 m)

Orientation

Voltage

Part Number

Price

Part Number

Price

Left Hand Right Hand

115VAC 115VAC

104634821 104654821

$3,487 $3,487

N/A* N/A*

Left Hand Right Hand

115VAC 115VAC

104635821 104655821

$3,487 $3,487

N/A* 104654831

Speed too Clear 90

Maximum Duty Cycle

Pump Size (liters)

Motor RPM

Actual Pump Output (liters)

Shipping Weight

2.0 sec 2.0 sec

100% 100%

1.0 1.0

2800 2800

2.0 2.0

170 lb (77.1 kg) 170 lb (77.1 kg)

- Wood

- Aluminum

Control Panel (replacement) Description Part Number

Price

624 MPS 115 VAC 624 BLD 115 VAC

$ 706 $ 706

20221465 2022712

N/A* part number has not been provided. Call FAAC for details. Left/right configuration can be changed White barrier springs can be changed to accommodate the 10 ft. model

Visit us online at

www.faacusa.com

Barrier Gate Operators

.Designed for high traffic applications

Model 640

. Two year limited warranty (see back cover)

Model 640 Barrier Gate Operators

UL 325

The U.L. Listed Model 640 barrier gates are designed for high traffic situations where longer beams are needed.

15 in. (3 cm)

6.6 (17 9 in. cm)

The 640 is shipped with the Model 624 BLD control panel and has the following features:

. . . . . . . .

Continuous duty operation Adjustable hydraulic pressures to control swing 4 different operating logics Pre-assembled counterbalanced system Automated fan cooling on all models Pause time selections Selectable warning light logic Quiet operation

42.5 in. (108 cm)

37.75 in. (101.6 cm) center of beam to grade

FAAC Model 640 barrier gate operator

Model 624 BLD Control Panel Operating Logics E = Garage door-like logic: signal to open, signal to close As = Automatic logic: one signal opens the gate and closes it after a timed pause . “A” logic can be set to function as an anti-tailgating logic . With “pre-flashing” selected by the dip switches, the control panel acts typically like other FAAC panels . Without “pre-flashing” selected, the control panel functions more like the “S” logic on other FAAC panels P = For parking applications requiring separate open and close controls; useful in retrofitting parking barrier gate applications R = Master slave The slave and relay card functions are now built in to the 624 BLD panel, alleviating the need for the cards altogether. Plug in detectors available; DP2, (p/n 785599) with 2-channel capability, meaning only one detector is needed to handle both free exit and safety

Left-hand installation, top view

Right-hand installation, top view

You must know the orientation of your barrier when ordering a Model 640.

Please Note: When ordering, you need to specify the length and type of beam you plan to install so that we can ship the correct counterbalancing spring. Information on Model 640 wooden and aluminum beams can be found on page 85 of this Section. An optional (recommended) foundation plate is vailable (see page 106).

* Measurements and weights stated in this Price List are approximate. For exact specifications, please refer to the Installation Manual or contact our technical department at 1-800-221-8278.

Model 640

Barrier Gate Operators

Model 640 CD . . . . .

FYI

100% duty cycle includes Model 624 BLD control panel automatic cooling fan beam must be ordered separately (see page 88) skirt beam kit available (see page 91)

Orange cabinet Orientation-

Voltage

Left Hand Right Hand

230VAC 230VAC

Left Hand Right Hand

230VAC 230VAC

Left Hand Right Hand

230VAC 230VAC

Left Hand Right Hand

230VAC 230VAC

UL 325

Part Number

Price

White cabinet Part Number

Price

Beam Length Wood

10468282 $3,836 10468283 $3,836 16 ft (4.9 m) 10466082 $3,836 10466083 $3,836 16 ft (4.9 m) 10468382 $3,836 10468383 $3,836 18 ft (5.5 m) 10466182 $3,836 10466183 $3,836 18 ft (5.5 m) 10468482 $3,836 10468483 $3,836 20 ft (5.5 m) 10466282 $3,836 10466283 $3,836 20 ft (5.5 m) 10468582 $3,836 10468583 $3,836 NA 10466382 $3,836 10466383 $3,836 NA

Actual Pump

Pump

ft (3.9 m) 4.0 sec 7210735 13 13 ft (3.9 m) 4.0 sec

1.0 1.0

2800 2800

2.0 2.0

100% 200 lb (90.7 kg.) 100% 200 lb (90.7 kg.)

16.5 ft (5 m) 5.5 sec 7210745 16.5 ft (5 m) 5.5 sec

1.5 1.5

1400 1400

1.5 1.5

100% 200 lb (90.7 kg.) 100% 200 lb (90.7 kg.)

ft (6 m) 7210755 20 20 ft (6 m)

8 sec 8 sec

1.0 1.0

1400 1400

1.0 1.0

100% 200 lb (90.7 kg.) 100% 200 lb (90.7 kg.)

23 ft (7 m) 7210825 23 ft (7 m)

8 sec 8 sec

1.0 1.0

1400 1400

1.0 1.0

100% 200 lb (90.7 kg.) 100% 200 lb (90.7 kg.)

Beam Length Aluminum

Spring Number

Speed to Size Motor Clear 90o (liters) RPM

* Measurements and weights stated in this Price List are approximate. For exact specifications, please refer to the Installation Manual or contact our technical department at 1-800-221-8278.

Plug-In Loop Detector Description PIN

Price

DP2 2Channel

$385

785599

Max.

Output Duty Weight (liters) Cycle Shipping

Control Panel (replacement) Description Part No. Price 624 MPS 230 VAC 8uf 202214401 $ 706 624 BLD 230 VAC 63000395 $ 706

Model 640 115 Volt While all configurations do not currently have part numbers assigned yet, all can be converted from existing part numbers. Simply order the part number shown, if beam size and left/right configuration are correct. Otherwise, order the 620 or 640 with desired beam length and designate left or right, and we will convert to a specific orientation.

Orange cabinet

White cabinet

Actual Pump

Max.

Orientation

Voltage

Left Hand

115VAC

104683821

$3,836 104663831 $3,836 16 - 18 ft

5.5sec

1.5

1400

1.5

200 lb (90.7 kg)

Right Hand

115VAC

N/A*

$3,836 104663831

5.5sec

1.5

1400

1.5

200 lb (90.7 kg)

Left Hand

115VAC

N/A*

$3,836 104663831 $3,836 18 - 20 ft

16 1/2 ft (5 m) 5.5 sec

1.5

1400

1.5

200 lb (90.7 kg)

(4.8 - 6 m) $3,836 104663831 $3,836 18 - 20 ft (4.8 - 6 m)

16 1/2 ft (5 m) 5.5 sec

1.5

1400

1.5

200 lb (90.7 kg)

Price

Spring Number

Beam Length - Aluminum

Part Number

Price

Part Number

Beam Length - Wood

13 ft (3.9 m) (4.8 - 5.4 m) 7210735 $3,836 16 - 18 ft 13 ft (3.9 m) (4.8 - 5.4 m)

7210745

Speed to Size Motor Clear 90o (liters) RPM

Output Duty Weight (liters) Cycle Shipping

Right Hand

115VAC

N/A*

Left Hand Right Hand

115VAC 115VAC

$3,836 104663831 $3,836 N/A N/A* 104662821** $3,836 104663831 $3,836 N/A

20 ft (6 m) 7210755 20 ft (6 m)

8 sec 8 sec

1.0 1.0

1400 1400

1.0 1.0

200 lb (90.7 kg) 200 lb (90.7 kg)

Left Hand Right Hand

115VAC 115VAC

104685821 $3,836 104663831 $3,836 N/A 104663821** $3,836 104663831 $3,836 N/A

23 ft (7 m) 7210825 23 ft (7 m)

8 sec 8 sec

1.0 1.0

1400 1400

1400 1.0 1400 1.0

200 lb (90.7 kg) 200 lb (90.7 kg)

N/A* part number has not been provided. Call FAAC for details. Springs can be modified to accommodate all models (white & orange). Configurations can be modified on all models.

Control Panel (replacement) Description 624 MPS 115V 624 BLD 115 VAC

Part No. Price 624 MPS 115 VAC 20221465 $ 706 2022712 $ 706

Visit us online at

www.faacusa.com

Barrier Gate Operators

Barrier Accessories

Contents

NOTE: The following accessories are specific to barrier operators only.

Other accessories that work with all types of FAAC operators, such as safety devices, access control systems, etc., are listed in the General Accessories Section, page 105.

Accessories Barrier Gate Accessories 1. 620 Foundation Plate The plate measures 14 in. x 7.86 in., has 4 holes for anchoring bolts, and has a hole for electrical conduits.

SHIPPING WEIGHT PART NUMBER PRICE:

10 lb (4.5 kg) 490058 $213

2. 615 Foundation Plate The plate measures 12 in. x 12 in., has 4 holes for anchoring bolts, and has a hole for electrical conduits.

SHIPPING WEIGHT PART NUMBER PRICE:

9 lb (4.1 kg) 2556 $62

4. 620/640 Emergency Bypass Solenoid The solenoid automatically disengages the hydraulic locking system of the barrier when the main power is not available, allowing the beam to be raised by hand. This option requires a 230VAC power supply.

SHIPPING WEIGHT PART NUMBER PRICE:

3 lb (1.4 kg) 401051 $798

5. Anti-Vandalism Valve Protects the integrity of the hydraulic system in the event the beam is forced

SHIPPING WEIGHT PART NUMBER PRICE:

3 lb (1.4 kg) 401066 $375

3. 640 Foundation Plate The plate measures 15.25 in. x 9 in., has 4 holes for anchoring bolts, and has a hole for electrical conduits.

SHIPPING WEIGHT PART NUMBER PRICE:

14 lb (6.4 kg) 490059 $253

* Measurements and weights stated in this Price List are approximate. For exact specifications, please refer to the Installation Manual or contact our technical department at 1-800-221-8278.

Accessories Barrier Gate Accessories 6. 624 Slave Card The optional slave card enables two opposing barriers to operate simultaneously. NOTE: Replacements for barriers with an MPS board

SHIPPING WEIGHT PART NUMBER PRICE:

1 lb (.5kg) 790846 $115

7. 624 FSW Card The optional FSW card enables safety devices to work when a 620/640 barrier is operating in the P (parking) mode . NOTE: Replacements for barriers with an MPS board.

SHIPPING WEIGHT PART NUMBER PRICE:

1 lb (.5 kg) 790847 $115

8. 624 Relay Card The optional relay card provides 6 normally open electrical contacts for connecting auxiliary equipment (computer controls, revenue equipment, alarms, etc.) or monitoring the barrierâ&#x20AC;&#x2122;s status. NOTE: Replacements for barriers with an MPS board

SHIPPING WEIGHT PART NUMBER PRICE:

1 lb (.5 kg) 360013 $291

9. Hinged Breakaway System (with sensor kit) For use with round beams on the Model 620 barrier. Includes: 1 sensor and 1 beam bracket for hing break-away beam

SHIPPING WEIGHT PART NUMBER PRICE:

428163* $781

* Measurements and weights stated in this Price List are approximate. For exact specifications, please refer to the Installation Manual or contact our technical department at 1-800-221-8278.

Accessories Barrier Gate Accessories 10. 615 Aluminum Beam Kit These aluminum beams come with a fixing bracket and are optional for new applications. All aluminum beams measure 1 in. x 4 in. x length of beam ordered. (Length of the 615 beams must be 6 ft. thru 13 ft. only.)

11. 615 Wooden Beam Kits These beam kit numbers are to be used when ordering with a 615 barrier and include the sandwich plate. If ordered separately the cost of the sandwich plate will be added to the price.

6 Foot (1.8 m) Length

8 Foot (2.4 m) Length

SHIPPING WEIGHT PART NUMBER PRICE:

10lbs 428087 $266

SHIPPING WEIGHT PART NUMBER PRICE:

8 Foot (2.4 m) Length

SHIPPING WEIGHT PART NUMBER PRICE:

7lbs 2146 $151

10 Foot (3 m) Length

12 lbs 428088 $340

SHIPPING WEIGHT PART NUMBER PRICE:

8lbs 2038 $159

15 lbs 428089 $380

PART NUMBER PRICE:

2537 $159

615 Wood Fixing Bracket

PART NUMBER PRICE:

2534 $273

615/620 Wood Fixing Bracket

10 Foot (3 m) Length

SHIPPING WEIGHT PART NUMBER PRICE: 13 Foot (4 m) Length

SHIPPING WEIGHT PART NUMBER PRICE:

19.5 lbs 428090 $435

PART NUMBER PRICE:

428343 $78

Feb 09 and earlier

PART NUMBER PRICE:

428342 $102

Feb 09 and newer

Feb 09 and earlier

Feb 09 and newer

615 Aluminum Fixing Bracket

615/620 Aluminum Fixing Bracket

FYI Aluminum beams ordered with a barrier will be shipped with appropriate fixing bracket; wood beams ordered with a barrier will be shipped with sandwich plate. Beams ordered separately will be assumed to be replacement beams only & will not included fixing or sandwich hardware unless requested.

* Measurements and weights stated in this Price List are approximate. For exact specifications, please refer to the Installation Manual or contact our technical department at 1-800-221-8278.

Accessories Barrier Gate Accessories 12. 620 Aluminum Beams All 620 rectangular aluminum beams measure 1 in. x 4 in. x the length of the beam ordered. For skirted or articulated beams order the length beam needed and the skirt kit or articulated beam kit. (See page 93 of this section)

13. 620 Wooden Beam All 620 wood beams are made of clear redwood and measure 1 in. x 4 in. x the length of the beam ordered.

6 Foot (1.8 m) Length

8 Foot (2.4 m) Length

Rectangular

Round

10 lbs 428087 $266

Rectangular

Round

10 Foot (3 m) Length

12 lbs 428088 $340

12 lbs 428078 $340

SHIPPING WEIGHT PART NUMBER PRICE:

Rectangular

Round

15 lbs 428089 $380

15 lbs 428075 $380

Rectangular

Round

SHIPPING WEIGHT PART NUMBER PRICE

19.5 lbs 428090 $435

19.5 lbs 428079 $ 435

PART NUMBER PRICE:

390265 $26

Adapter

SHIPPING WEIGHT PART NUMBER PRICE 8 Foot (2.4 m) Length

SHIPPING WEIGHT PART NUMBER PRICE 10 Foot (3 m) Length

SHIPPING WEIGHT PART NUMBER PRICE 13 Foot (4 m) Length

SHIPPING WEIGHT PART NUMBER PRICE

7 lbs 2146++ $151

8 lbs 2038++ $159

12 Foot (3.7 m) Length

SHIPPING WEIGHT PART NUMBER PRICE:

9 lbs 2039++ $179

REPLACING OLDER BEAMS When replacing beams on 620 barriers older than a 10/05 serial #, the fixing bracket will have to be replaced (part#:428342) and an adapter will be needed (part#:390265)

* Measurements and weights stated in this Price List are approximate. For exact specifications, please refer to the Installation Manual or contact our technical department at 1-800-221-8278.

Accessories Barrier Gate Accessories 14. 640 Aluminum Beam All 640 rectangular aluminum beams measure 2 in. x 4 in. x length of beam order. For the skirted beams order the aluminum beam and the skirted beam kit. (See page 93 of this section)

15. 640 Wood Beam All 640 wooden beams are made of clear redwood an measured 2 in. x 6 in. x length of beam ordered.

13' (4m) Length

16' (4.9m) Length

SHIPPING WEIGHT PART NUMBER PRICE 16' (4.9m) Length

SHIPPING WEIGHT PART NUMBER PRICE 20' (3m) Length

SHIPPING WEIGHT PART NUMBER PRICE 23' (7m) Length

SHIPPING WEIGHT PART NUMBER PRICE

PART NUMBER PRICE:

Rectangular

Round

22 lbs 428061+ $458

Rectangular

Round

28 lbs 428062+ $510

Rectangular

Round

30 lbs 428063+ $602

Rectangular

Round

36 lbs 428064+ $706

428154 $212

SHIPPING WEIGHT PART NUMBER PRICE

22 lbs 2410 $342

18' (2.5m) Length

SHIPPING WEIGHT PART NUMBER PRICE

26 lbs 2418 $353

20' (3m) Length

SHIPPING WEIGHT PART NUMBER PRICE

PART NUMBER PRICE:

32 lbs 2043 $367

428071 $481

Sandwich Platet 640 wood beam

640 Aluminum Fixing Bracket

* Measurements and weights stated in this Price List are approximate. For exact specifications, please refer to the Installation Manual or contact our technical department at 1-800-221-8278.

Accessories Barrier Gate Accessories 16. Articulated Beam Kits Articulated beams are used in parking garages or other applications with low overhead clearances. In addition to ordering a rectangular aluminum beam for your Model 620 barrier, you need to order this kit. The kit will handle a maximum 9 ft ceiling height. FAAC will articulate the beam for you. Supply us, in writing, the distance between the base of the barrier cabinet and the ceiling. You can print this form and send us the infomation required.

SHIPPING WEIGHT PART NUMBER PRICE:

15 lb (6.8 kg) 428137 $725

17. Skirted Beam Kits A skirted beam keeps vehicles from passing under a barrier beam and consists of a rectangular aluminum beam (ordered separately) and one or more kits for skirting the beam. Each kit is a series of interlocking, jointed metal pieces forming a framework you attach to the bottom of the beam. When the beam raises, gravity causes the skirting to collapse against the vertical beam. If you are retrofitting the skirt to an existing beam, call us about whether you need a different compression spring for your operator. Order a combination of kits whose combined length is 1 foot shorter than the length of your rectangular aluminum beam: . One kit contains mounting hardware and the metal skirt that is about 6 feet (more precisely, 2 meters) long. The kit will work with Models 620 and 640 barriers. . The other kit contains mounting hardware and the metal skirt that is about 10 feet (more precisely, 3 meters) long. The kit will work with Models 620 and 640 barriers.

Articulated Beam

Skirted Beam (comes assembled, ready to attach to beam)

6 Foot (2 m) Skirt Kit

SHIPPING WEIGHT PART NUMBER PRICE:

5 lb (2.3 kg) 4282431 $445

10 Foot (3 m) Skirt Kit

SHIPPING WEIGHT PART NUMBER PRICE:

10 lb (4.5 kg) 4282441 $637

* Measurements and weights stated in this Price List are approximate. For exact specifications, please refer to the Installation Manual or contact our technical department at 1-800-221-8278.

Visit us online at

www.faacusa.com

2006 Price List Slide Gate Operators . . . . . . . . . . . . . . . . 95 Model 746 . . . . . . . . . . . . . . . . . . . . . . . . 96 Model 844 . . . . . . . . . . . . . . . . . . . . . . . . 97

FAAC Swing and Slide Gate Operators Cycles Per Hour 30

Swing Model 412/402/422 750/760

Single family, Moderate Traffic

402/422 750/760

High Traffic

Continuous Duty

400

Application Single family, Low Traffic

Slide Operators

Contents

Slide Model 746

844

Example of a Complete Slide Gate System

4 8 1 2 7

5 3 6

No. 1

Description

More Information

The slide gate operator automates the gate and is available with chain or rack and pinion drive: .Chain offers easy installation .Rack and pinion offers elegant, low maintenance and improved security The U.L. Listed weather resistant accessory interface box houses the control panel for the operator and its accessories

Accessory interface boxes, pages 127-128

Photobeam sets help prevent entrapment between the sliding gate leaf and another object by using the safety logic of the control panel.

Photobeams, pages 18-19 Other reversing devices, pages 116-120

The warning light alerts anyone near the gate of its movement and can light the gateway.

Warning lights with varied logics, page 123

The mounting pedestal provides a platform for mounting the operator.

Vehicle sensors (inductive loops) activate the operator to prevent the gate from closing on a vehicle. Talk to our sales staff about whether your installation requires a safety, free exit, and/or closing (security) loop.

Activating switches allow the opening or closing of the gate. The switch may be activated by the following: .Key .Card .Keyboard code

The antenna for the radio receiver and transmitter allows remote control of the gate.

Loop detectors and loops, pages 116-120

Entry systems and devices, pages 106-116

Radio systems, pages 115-116

Slide Gate Operators

Models 746 and 844

Slide

.Designed for residential and light commercial applications . Two year limited warranty (see back cover)

FAAC operators for sliding gates are among the safest available. The anti-entrapment and security protection provided by all gate operators can and should be improved with photocells, loop detectors, sensing edges and/or other similar devices. FAAC strongly recommends that devices such as these be installed with all automated gate systems. To guarantee the safety and efficiency of its equipment, FAAC strongly recommends that qualified personnel test the safety system on an annual basis, as well as maintain the overall hydraulic or mechanical system.

Model 746 Slide Gate Operators Features include: • 230 VAC • External limits • Manual release • “Soft Stop” on opening and closing • 1/2 hp motor • Pulling force: 35 lb (16 kg) • Speed: 50 ft/min (12 m/min) • Duty cycle: 50% motor run time • Microprocessor control: choose from 6 operating logics: A (automatic): signal to open; signal to close S (security): similar to A logic, useful in reducing tailgating E (semi-automatic): garage door-like operation; signal to open, signal to close EP (semi-automatic) similar to E logic but second signal stops gate, third signal reverses gate B (manned, pulsed): designed for guard station use, requires 3-button switch (pulsed) to open, close and stop gate C (manned, constant): similar to B logic but 3-button switch requires constant pressure on each button • Plus - push-button programmable - reverse on contact (programmable on and off) - built-in cycle counter

Model

Package Includes

746 – Chain

One operator, 780D control panel,16 or 20 tooth sprocket, protective cover, limit switch plates, mounting angle brackets, chain-to-gate mounting hardware with nickel plated master links, warning signs Note: Chain is not included (see charts below)

746 – Rack & Pinion

One operator, 780Dcontrol panel, 20 tooth pinion, mounting angle brackets and limit switch plates Note: Rack is not included (see charts below)

Weight

Voltage

Number

Price

50 lb (22.7 kg)

230 VAC

109775

$1,484

44 lb (20 kg)

230 VAC

109773

$1,484

Accessory

Description

Shipping Weight Part Number Price

Nickel Chain

Two master links shipped with each length of chain. Sold in 10 ft lengths only. “

.5 lb/ft (.2 kg)

2002

$17/ft

Gear Rack

Galvanized steel rack is 3.28 ft long, works with any FAAC slider, comes with rack-to-gate hardware

6 lb (2.7 kg) per section

719323

$51 per section

Foundation Plate

For ground level mounting, is 6 x 10.5 in., comes with rebar anchors

6 lb (2.7 kg)

2278

$74

Mounting Pedestal

For elevated mounting, 18 in. galvanized

18 lb (8.2 kg)

2411

$221

Photobeam

Directional with diagonal alignment; required for UL-325 compliance.

2 lb (1 kg)

785163

210

Receiver Transmitter Transmitter Antenna

FAAC single channel FAAC single button FAAC two button FAAC tuned antenna kit

1 lb (.5 kg) 1 lb (.5 kg) 1 lb (.5 kg) 2 lb (1 kg)

1RP418DS 1TM418DS 787317 412003

68 38 45 75

Control Panel (replacement) Control Panel (replacement)

Model 780 D Adapter Kit Replacement (w/ 780D board & access) (replaces an existing MPS board)

2 lb (.9 kg) 3 lb (.9 kg)

7909212 490114

$565 $580

Sprockets (replacement)

Z16 – pin shaft

719137

$75

719135

$82

Stainless Steel Chain

Z20 – pin shaft

(No charge when ordered with operator only)

.5 lb/ft (.2 kg)

2000

$6/ft

* Maximum Gate Length is limited by the Pulling Force requirement and the 746’s maximum motor run time of two minutes.* Note: Measurements and weights stated in this Price List are approximate. For exact specifications, please refer to the Installation Manual or contact our technical department at 1-800-221-8278. * The anti-entrapment protection and security protection provided by the 746 can and should be improved with photocells, loop detectors, sensing edges and/or other similar devices. FAAC strongly recommends that devices such as these be installed with all automated gate systems.

Model 844

Slide Gate Operators with Oil Immersed Clutch

Features include: • 230 VAC • External limits • Manual release • “Soft Stop” on opening and closing • 3/4 hp motor • Oil immersed clutch which, when properly adjusted, limits the amount of pressure the operator can apply to moving the gate • Pulling force: 100 lb (45 kg) • Speed: 50 ft/min (12 m/min) • Duty cycle: 30% motor run time • Microprocessor control: choose from 6 operating logics: A (automatic): signal to open; signal to close S (security): similar to A logic, useful in reducing tailgating E (semi-automatic): garage door-like operation; signal to open, signal to close EP (semi-automatic) similar to E logic but second signal stops gate, third signal reverses gate B (manned, pulsed): designed for guard station use, requires 3-button switch (pulsed) to open, close and stop gate C (manned, constant): similar to B logic but 3-button switch requires constant pressure on each button • Plus - push-button programmable - reverse on contact (programmable on and off) - built-in cycle counter

Model

Package Includes

844 – Chain

844 – Rack & Pinion

Weight

Voltage

Number

Price

One operator, 780 D control panel, 16 or 20 tooth sprocket, protective cover, limit switch 43 lb (20 kg) plates, mounting angle brackets, chain-to-gate mounting hardware with nickelplated master links. Note: Chain is not included (see charts below)

230 VAC

109902

$1,934

One operator, 780 D control panel, 20 tooth pinion, mounting angle brackets and limit switch plates. Note: Rack is not included (see charts below)

230 VAC

109837

$1,934

43 lb (20 kg)

Accessory

Description

Shipping Weight

Nickel Chain

Two master links shipped with each length of chain. Sold in 10 ft lengths only. “

.5 lb/ft (.2 kg)

2000

$6/ft

.5 lb/ft (.2 kg)

2002

$17/ft

Gear Rack

Galvanized steel rack is 3.28 ft long, works with any FAAC slider and comes with rack-to-gate hardware

6 lb (2.7 kg) per section

719323

$51 per section

Foundation Plate

For ground level mounting, is 6 x 10.5 in., comes with rebar anchors to set in concrete pad

6 lb (2.7 kg)

2278

Stainless Steel Chain

Part Number

Price

$74

Mounting Pedestal

For elevated mounting, 18 in. galvanized

21 lb (9.5 kg)

2411

$221

Photobeam

Directional with diagonal alignment; required for UL-325 compliance.

2 lb (1 kg)

785163

210

Receiver Transmitter Transmitter Antenna

FAAC single channel FAAC single button FAAC two button FAAC tuned antenna kit

1 lb (.5 kg) 1 lb (.5 kg) 1 lb (.5 kg) 2 lb (1 kg)

1RP418DS 1TM418DS 787317 412003

68 38 45 75

Control Panel (replacement) Control Panel (replacement)

Model 780 D Adapter Kit Replacement (w/780D board & access) (Replaces an existing MPS board)

2 lbs 3 lbs

7909212 490114

$565 $580

Sprockets (replacement only)

Z16 – pin shaft (No charge when ordered with operator only) Z20 – pin shaft (No charge when ordered with operator only)

719137 719135

$75 $82

Maximum Gate Length is limited by the Pulling Force requirement and the 844’s maximum motor run time of four minutes. * Measurements and weights stated in this Price List are approximate. For exact specifications, please refer to the Installation Manual or contact our technical department at 1-800-221-8278.

Visit us online at

www.faacusa.com

Accessories Entry Systems and Devices . . . . . 100-109 Switches . . . . . . . . . . . . . . . . . . . . . . . . 101 Telephone Entry Systems . . . . . . . . . . . 105 Radio Controlled Systems . . . . . . . . . . . 109 Safety and Security Devices . . . . . 110-117 Loops and Loop Detectors . . . . . . . . . . 110 Locks . . . . . . . . . . . . . . . . . . . . . . . . . . . 115 Warning Lights . . . . . . . . . . . . . . . . . . . . 117 Electrical & Hardware. . . . . . . . . . . 118-122 Timers . . . . . . . . . . . . . . . . . . . . . . . . . . 118 Ditek Surge Protection. . . . . . . . . . . . . . 119 Control Panel Enclosures . . . . . . . . . . . 120 Mounting Post . . . . . . . . . . . . . . . . . . . . 121 Hinges . . . . . . . . . . . . . . . . . . . . . . . . . . 122

Accessories

Contents

Barrier Gate Accessories (see Barrier Gate section p. 85)

Gate Accessories

18. DigiKeyboard Entering a 4 digit combination on the 9 button keyboard actuates the gate. May be programmed to one of 4,095 combinations. Features: .Required power supply: 24 VDC (available on FAAC control panels.).Indoor or outdoor use .For use with A, E, and S FAAC control panel logics: A = automatic logic: signal to open; gate closes automatically after timed pause E = garage door-like logic: signal to open; signal to close S1 = security logic: similar to A logic, useful in reducing tailgating Dimensions: 2.75 in. high x 2.75 in. wide x 3.43 in deep (7 cm x 7 cm x 8.7 cm). Depth measurement includes housing. The DigiKeyboard requires the following additional equipment (priced separately): .Metal Housing (see #20 this section), Plastic Housing (see #21 this section), or Mounting Post Kit (see page 51) .DS Decoder , (formerly called the MD01) (see #19 this section)

Double Mounting Post for Digikey Features: . Anodized aluminum . . Double post (holds Digikey ): 44 in. (111.5 cm)

3.54 in. (9 cm) 2.75 in. (7 cm)

2.38 in. (5.8 cm)

1 lb (.5 kg) 404005 $367 each

4.5 in. (11.5 cm)

SHIPPING WEIGHT PART NUMBER PRICE:

DigiKeyboard

3.75 in. (9.5 cm)

Accessories

19. DS Decoder (formerly MD01) This is the "brain" behind the DigiCard and DigiKeyboard

401034 737630*

DS Decoder (formerly MD01)

Systems. Dip switches provide for code selection. More than one DS Decoder may be used if multiple codes are desired. Features: .Required power supply: 24 VDC (available on FAAC control panels.) .Plugs into 455 D control panel

SHIPPING WEIGHT PART NUMBER PRICE:

Mounting Post Footprint SHIPPING WEIGHT PART NUMBER PRICE:

9 lb 401034/737630* $170

2 lb (1 kg) 785502 $114

* Measurements and weights stated in this Price List are approximate. For exact specifications, please refer to the Installation Manual or contact our technical department at 1-800-221-8278.

100

Accessories

Gate Accessories

20. Metal Housing for DigiCard Reader & DigiKeyboard Painted mild steel. Dimensions: 2.75 in. high x 2.75 in. wide x 2.25 in. deep (7 cm x 7 cm x 5.7 cm)

SHIPPING WEIGHT PART NUMBER PRICE

3 lb (1.4 kg) 720037 $37.00

Metal Housing for DigiCard Reader & DigiKeyboard

21. Plastic Housing for DigiCard Reader & DigiKeyboard Dimensions: 2.75 in. high x 2.75 in. wide x 2.25 in. deep (7 cm x 7 cm x 5.7 cm)

SHIPPING WEIGHT PART NUMBER PRICE:

2 lb (1 kg) 720043 $12.00 Plastic Housing for DigiCard Reader & DigiKeyboard

22. T10 Key Switch Features: .Switch rating: 250 VAC; 10 amps .Indoor or outdoor use .Key returns when released .N.O. (Normally Opened) and N.C. (Normally Closed) Connection For use with A, E, and S FAAC control panel logics: A = automatic logic: signal to open; gate closes automatically after timed pause E = garage door-like logic: signal to open; signal to close S1 = security logic: similar to A logic, useful in reducing tailgating Dimensions: 2.75 in. high x 2.75 in. wide x 4 in. deep (7 cm x 7 cm x 10.2 cm) Depth measurement includes housing. The T-10 Key Switch requires the following additional equipment (priced separately): .Metal housing (see #25 this section) or Plastic Housing (see #26 this section)

SHIPPING WEIGHT PART NUMBER PRICE:

T10 Key Switch

2 lb (1 kg) 401010036 $93

* Measurements and weights stated in this Price List are approximate. For exact specifications, please refer to the Installation Manual or contact our technical department at 1-800-221-8278.

101

Entry Accessories

Systems and Security Devic

23. T-10E Key Switch Features: .Switch rating: 250 VAC; 10 amps .Indoor or outdoor use .Key returns when released .N.O. (Normally Opened) and N.C. (Normally Closed) Connection For use with A, E, and S FAAC control panel logics: A = automatic logic: signal to open; gate closes automatically after timed pause E = garage door-like logic: signal to open; signal to close S1 = security logic: similar to A logic, useful in reducing tailgating Dimensions: 3.75 in. high x 2.75 in. wide x 1.75 in. deep (9.5 cm x 7 cm x 4.5 cm) .Classy brushed aluminum look .Designed to fit into the popular FAAC brushed aluminum photobeam stand (See p. 67 of the Price List)

SHIPPING WEIGHT PART NUMBER PRICE:

T-10E Key Switch

2 lb (1 kg) 401019036 $96

* Measurements and weights stated in this Price List are approximate. For exact specifications, please refer to the Installation Manual or contact our technical department at 1-800-221-8278.

102

Accessories

Entry Systems and Security Devices

24. Two-Button Switch Features: .Switch rating: 250 VAC; 16 amp .Built-in warning light: 24 VAC; 3 watt (powered off dedicated FAAC control panel terminals.) .Indoor use only .Open button has a N.O. (Normally Opened) and a N.C. (Normally Closed) Connection. .Stop button has a N.O. (Normally Opened) and a N.C. (Normally Closed) Connection. For use with A, E, and S FAAC control panel logics: A = automatic logic: signal to open; gate closes automatically after timed pause. E = garage door-like logic: signal to open; signal to close S1 = security logic: similar to A logic, useful in reducing tailgating Dimensions: 2.75 in. high x 2.75 in. wide x 4 in. deep (7 cm x 7 cm x 10.2 cm) Depth measurement includes housing. The Two Button Switch requires the following additional equipment (priced separately): .Metal housing (see #25 this section) or Plastic Housing (see #26 this section)

SHIPPING WEIGHT PART NUMBER PRICE:

Two-Button Switch

3 lb (1.4 kg) 401002 $72.00

25. Multi-Use Metal Housing (For T-10 Key Switch, Two Button FAAC Switch, and some photocells) Powder coated steel. Dimensions: 2.5 in. high x 2.5 in. wide x 2.75 in. deep (6.4 cm x 6.4 cm x7 cm)

SHIPPING WEIGHT PART NUMBER PRICE:

3 lb (1.4 kg) 720089 $37.00

Multi-Use Metal Housing

26. Multi-Use Plastic Housing (For T-10 Key Switch, Two Button FAAC Switch, and some photocells) Dimensions: 2.5 in. high x 2.25 in. wide x 2.75 in. deep (6.4 cm x 5.7 cm x7 cm)

SHIPPING WEIGHT PART NUMBER PRICE:

1 lb (.5 kg) 720043 $12.00

Multi-Use Plastic Housing

* Measurements and weights stated in this Price List are approximate. For exact specifications, please refer to the Installation Manual or contact our technical department at 1-800-221-8278.

103

Entry Systems and Security Devices Accessories 27.Two-Button Switch Features: .Switch rating: 250 VAC; 10 amps .Built-in warning light: 24 VAC; 3 watt (powered off dedicated FAAC control panel terminals.) .Indoor or outdoor use .Painted aluminum .Surface mounted .Actuate button is N.O. (Normally Opened) .Stop button is N.C. (Normally Closed) For use with A, E, and S FAAC control panel logics: A = automatic logic: signal to open; gate closes automatically after timed pause E = garage door-like logic: signal to open; signal to close S1 = security logic: similar to A logic, useful in reducing tailgating Dimensions: 4 in. wide x 2.87 in. high x 2.25 in. deep (10.2 cm x 7.3 cm x 5.7 cm)

SHIPPING WEIGHT PART NUMBER

PENDING - Please call FAAC for more information

28. Three-Button Switch Features: .Switch rating: 250 VAC; 10 amps .Indoor or outdoor use .Painted aluminum .Surface mounted .Open buatton is N.O. (Normally Opened) .Close button is N.O. (Normally Opened) .Stop button is N.C. (Normally Closed) For use with B, C, and P FAAC control panel logics: B = 3 momentary switches: open, close and stop C = 2 continuous pressure switches: open and close; 1 momentary pressure switch: stop P = 3 momentary switches: open, close and stop Dimensions: 4 in. wide x 2.87 in. high x 2.25 in. deep (10.2 cm x 7.3 cm x 5.7 cm)

SHIPPING WEIGHT PART NUMBER

Two-Button Switch

Three-Button Switch

PENDING - Please call FAAC for more information

* Measurements and weights stated in this Price List are approximate. For exact specifications, please refer to the Installation Manual or contact our technical department at 1-800-221-8278.

104

Accessories

Entry Systems and Security Devices

29. FAAC Telephone Entry - PhoneLink Features: .Available in 50 & 500 code capacity .Programmable personal master code .Programmable latch code .Programmable "one shot" code .Programmable "sleep" code, disables both keypad & call button .2 relays .Adjustable volume .Event input .Night light with "60 second on" capability .Optional camera .Unique double ring cadence .Call waiting .Call button disconnect .By-pass switch included

New!

Dimensions: 7.4 in. x 7.4 in. x 5 in. (18.8 x 18.8 x 12.7 cm)

30. Select Engineered Systems Telephone Entry - TEC II Features: .LCD screen easy to read day or night .Directory displays two lines of characters, 5/19 in. size .14 characters per name .14 digit phone number per name .2 entrances expandable to 4 entrances .Programmable code and PIN lengths 1-9 digits .Modem capability: 1200 or 9900 baud (Selcom 95 or 2000) .Programmable via key pad, modem, RS232 or current loop .Programmable open key pad for voice mail Dimensions: 10 in. wide x 14 in. high x 2.75 in. deep (25 cm x 36 cm x 7 cm)

SHIPPING WEIGHT PART NUMBER PRICE

PhoneLink

Model

Shipping Weight

Part Number

Price

PhoneLink - 50 code

9 lb (4.1 kg)

2875

Call

PhoneLink - 500 code

9 lb (4.1 kg)

2876

Call

TEC II

15 lb (6.8 kg) 3033 Call us at 800-221-8278

* Measurements and weights stated in this Price List are approximate. For exact specifications, please refer to the Installation Manual or contact our technical department at 1-800-221-8278.

105

Accessories Entry Systems and Security Devices 31. Select Engineered Systems Telephone Entry - TEC IV The TEC IV is identical to the TEC II (#14) except .LCD Directory displays 4 names, 3/8 in. size Dimensions: 10 in. wide x 14 in. high x 3 in. deep (25 cm x 36 cm x 8 cm)

SHIPPING WEIGHT PART NUMBER PRICE

15 lb (6.8 kg) 3034 Call us at 800-221-8278

32. Select Engineering Systems Telephone Entry - Select Gate 2 Features: .Uses existing phone lines .Lighted front panel .Local call waiting (bi-directional) .Call forwarding capability .Dials 5 outside phone numbers .Four selectable ring styles .Programmed memory not affected by power failure .Optional 2nd and 3rd relays Dimensions: 9.5 in. wide x 7 in. high x 4.33 in. deep (24 cm x 18 cm x 11 cm)

SHIPPING WEIGHT PART NUMBER PRICE

8 lb (3.6 kg) 3070 Call us at 800-221-8278

TEC IV

Select Gate

33. Select Engineered Systems Telephone Entry - TEC 101 Features: .No sunshield needed to read LCD display .Programmable via keypad or with optional modem and software .Four capacities: 50, 125, 500 and 995. Each offers same number of phone numbers, PIN codes and names. .Dials up to 14 digit telephone numbers .Two line LCD display, provides directory names one at a time Dimensions: 8 in. wide x 11 in. high x 3 in. deep 20 cm wide x 28 cm high x 8 cm deep

SHIPPING WEIGHT 11 lb (5 kg) PART NUMBER (50 Code Version) 2847 PRICE Call us at 800-221-8278

106

TEC 101

Accessories

Entry Systems and Security Devices

34. FAAC AdvantageDK Keyless Entry New! For keyless access needs. Features: .Programmable four digit codes available: 1000 .Programmable personal master code .Programmable latch/unlatch code .Programmable "sleep" code ."Three strikes, you're out" - resets in 2 minutes .External event input .Two relays w/ variable output time: 1-99 seconds .LED indicators .Optional camera (intercom versions only) .Audible tone .Non-volatile memory .Night light .Limited two year warranty Dimensions: .ADV-05 to ADV-1000: 5.25 in. x 4.75 in. x 4.5 in. (14.6 x 12.1 x 11.4 cm)

ADV-1000

Model

Shipping Weight

Part Number

Price

Model ADV-1000

5 lb (2.3 kg)

2916

$456

* Measurements and weights stated in this Price List are approximate. For exact specifications, please refer to the Installation Manual or contact our technical department at 1-800-221-8278.

107

Accessories

Entry Systems and Security Devices

35. Fire Entry Unit Suitable for outdoor use and can be used with all FAAC control panel logics (if you have questions, call FAAC at 1-800-221-8278). There are two versions: one Knox style and one microswitch style Features: • Both versions are painted bright red for high visability • Both have a zinc galvanized box with UV-protected powder coated paint • Both have a box which can hold keys or manual release handles for access if electrical power is unavailable (see explanation of “gate safe” and “gate secure” installations on page 9 of the Products Catalog or Price List).

Fire Entry Unit Knox Style Part 2980

Model 2980 • Uses a Knox lock (lock not provided). Knox locks are provided by local fire departments or by the Knox Company. Model 2981 • Uses a padlock (lock not provided) • Has a hinged door with built-in micro-switch. Opening the door activates the switch. Specifications: • Required power supply: none required • Micro switch: Normally Opened (N.O.) and Normally Closed (N.C.) Dimensions: 5.5 in. high x 4.5 in. wide x 4 in. deep (14 cm x 11.4 cm x 10.2 cm)

SHIPPING WEIGHT PART NUMBER PRICE:

5 lb (2.3 kg) 2980 (Knox style) $185

SHIPPING WEIGHT PART NUMBER PRICE:

5 lb (2.3 kg) 2981 (Micro-switch style) $178

Fire Entry Unit Micro-Switch Style Part # 2981

* Measurements and weights stated in this Price List are approximate. For exact specifications, please refer to the Installation Manual or contact our technical department at 1-800-221-8278.

108

Accessories Entry Systems and Security Devices FAAC Radio Controlled System 36. FAAC TM1418 Transmitter Features: .Choice of over 1000 codes .12V battery included Dimensions: 1.5 in. x 3 in. x .63 in. Note: the FAAC TM1418 transmitter requires the FAAC RP1418 receiver (priced separately).

SHIPPING WEIGHT PART NUMBER PRICE

1 lb (.5 kg) 1TM418DS $38.00

37. FAAC TM1418 Dual Transmitter Features: Same as Single Transmitter Note: The FAAC TM1418 transmitter requires the FAAC RP1418 receiver and the dual interface board (see #37 below)

SHIPPING WEIGHT . PART NUMBER PRICE

37.

1 lb (.5 kg) 1RP418DS $68.00

36-A. FAAC XT4 433RC Transmitter Features: .Rolling code technology - the code varies when transmitter is used Analgorithm recognizes and confirms the signal. .12V battery included .4 channels Visor clip included Dimensions: 2 in. x 2.5 in. x .1/2 in. Note: the FAAC XT433RC receiver (priced separately).

SHIPPING WEIGHT PART NUMBER PRICE

1 lb (.5 kg) 787453 $23.00

36-A.

Ne Ava w! il Apri able l 09 â&#x20AC;&#x2122;

1 lb (.5 kg) 787317 $45.00

38. FAAC RP1418 Receiver The modular FAAC RP1418 receiver can be connected directly to any FAAC electronic control panel. Features: .Required power supply: 24DVC .Eliminates the need to hard wire into the control panel. .Dip switches provided for code selection Reception range (may vary with environmental conditions.) With built-in antenna wire: up to 100 ft (30 m) With tuned aerial antenna kit: up to 300 ft (91 m) Dimensions: 2 in. x 2 in.

SHIPPING WEIGHT PART NUMBER PRICE

36.

38-A. FAAC RP433RC Receiver The modular FAAC RP433RC receiver can be connected directly to any FAAC electronic control panel. Features: .Required power supply: 24DVC .Eliminates the need to hard wire into the control panel. .Rollind code technology

SHIPPING WEIGHT PART NUMBER PRICE

C AA F re ll Ca r mo s fo tail de

1 lb (.5 kg) 787741 $50.00

39. FAAC RP Interface Board (to use FAAC receiver with non-FAAC product)

SHIPPING WEIGHT PART NUMBER PRICE

1 lb (.5 kg) 787725 $55.00

109

Accessories Entry Systems and Security Devices 40. FAAC Tuned Antenna Kit The standard kit includes: 16 ft (5 m) of coax cable 10.5 in. (26.7 cm) whip antenna Gate mount bracket

. . .

SHIPPING WEIGHT PART NUMBER PRICE:

2 lb (1 kg) 412003 $75 .00 FAAC Tuned Antenna Kit

Loops and Loop Detectors 41. FAAC Model DSP-15 Vehicle Detector The DSP-15 has been specifically designed to handle all parking, drive-through and access control applications on virtually any size loop. .Required power supply: 24 VDC .Dimensions of board: 4 in. wide x .87 in. high x 2.75 in. deep (10.2 cm x 2.2 cm x 7 cm) 1. Selectable signaling provided by 2 relays: a) Relay A provides main detection output which can be modified by delay and extension b) Relay B is switch selectable to one of four options: 1) True presence (no extension or delay) 2) Pulse on vehicle entering loop 3) Pulse on vehicle exiting loop 4) Loop fail output Frequency: automatically tunes within one of four operating ranges Sensitivity: .10 sensitivity settingscan be used in special applications

42. DSP-7LP Vehicle Detector The DSP-7LP will operate on any voltage from 10 to 30 Volts AC or DC and draws approx. 1 milliampere while waiting for a car. The power LED winks continuously once per second to indicate that the detector is operating in the low power mode. The detector’s small size and lack of any switches or dials makes the DSP-7LP the industry’s first solar friendly “Plugand-Play” vehicle detector. The DSP-7Lp is preset to the normal sensitivity level used in parking/access control applications, and tunes itself to the best operating efficiency. Feature include: • Loop Size – any in-ground inductive loop from 20 to 1200 nH • Sensitivity – automatic. it compensates for large loops and large lead-ins • Output Ratings – single output, 1 amp relay at 30 VDC resitive • Loop Failure – green power indicator flashes twice per sec-

110

to insure complete detection of highbed vehicles Connector: ten position terminal block (no harness required) Indicators: separate power/fail and detect LED’s Loop size: works on any in-ground inductive loop from 20 to 1000uH Hold time: normal or extended hold time is selectable Loop failure: if the loop fails, opens or shorts, the power indicator flashes. Output B can also indicate this position if desired. The option to “remember” an intermittent loop failure is also provided. Delay: can be selected to ignore fast moving vehicles over the loop Extension: extends a call for slow moving vehicles

SHIPPING WEIGHT PART NUMBER PRICE

2 lb (1 kg) 2664 $200

ond if loop circuit is open and 10 times per second if loop circuit is shorted. it operates in the fail-safe mode and will output a “Detect” for either of these loop failure conditions. • Size – 1.52 in.H x 2.9 in. W x 1.56 in. D • Connector – removable 7-pin terminal block. Pin assignments are: 1 – Relay (NC) (opens for detect) 2 – Relay Common 3 – Relay (NO (closes for detect) 4 – Power common 5 – Power in 6 – Loop 7 – Loop • Operating Temperature – -35° to 165°F (-37°C to 74°C)

SHIPPING WEIGHT PART NUMBER PRICE

1 lb (.5 kg) 2659 $201

Accessories Entry Systems and Security Devices Loops and Loop Detectors 43. DSP-11 Vehicle Detector The DSP-11 is a switch-less vehicle detector with industry standard 11-pin base. These new detectors have been designed to handle parking, drive-thru and access control applications. Model types: DSP-11-LV: low voltage version, 10-30 volts AC or DC DSP-11-117: medium volt version, 117 volts AC Dimensions: 1.4 in. wide x 1.4 in. high x 2.75 in. deep (3.56 cm x 3.56 cm x 7 cm) Loop Size: works on any in-ground inductive loop from 20 to over 1500 nH Indicators: separate power/fail and detect LED’s Detect Memory: power interruptions of short duration are ignored. If power fails for approx. 1.5 sec. or less the detector “remembers” a vehicle. Sensitivity: automatic – compensates for large loops and long lead-ins. Loop Failure: green power indicator flashes slowly if the loop circuit is open and quickly if loop circuit is shorted. The detector will output a “detect” for either of these loop failed conditions. Fail Safe Operation: All DSP detectors are designed to be Fail Safe in their operation. It will output a “detect” (contact closure) for a “failed” loop condition OR a loss of power to the detector. Output Relay: 1A at 125 VAC general use, 1A at 30 VDC resistive. Both N.O. (closes for detect) and N.C. (opens for detect) outputs.

SHIPPING WEIGHT PART NUMBER PRICE

1 lb (.5 kg) 2665 $120

44. DSP-10 Vehicle Detector The DSP-10 has been specifically designed to handle all parking, drive-thru and access control applications. Can be used as either a safety loop or free exit loop detector. With flexibility of “fail-safe” or failsecure,” it is the only parking detector you will ever need. Model types: DSP-10-LV: low voltage version, 10-30 volts AC or DC DSP-10-117: medium volt version, 117 volts AC DSP-10-230: high volt version, 230 volts AC Enclosure: impact resistant, high temperature plastic, 1.75 in. wide x 2.375 in. high x 3.61 in. deep (45 mm x 60 mm x 92 mm) Loop Size: works on any in-ground inductive loop from 20 to 1000 nH. Sensitivity: 10 settings Frequency: automatically tunes within one of four operating ranges Outputs: Two separate relay outputs that are front panel programmable: Output A – main detection output. Can be modified by delay and extension. Factory set to fail-safe. Output B – can be set to one of the following: 1) true presence (no extension or delay) 2) pulse on vehicle entering loop 3) pulse on vehicle exiting loop 4) loop fail output Sensitivity Boost: can be used in special applications to insure complete detection of high-bed vehicles. Loop Failure: if loop fails (opens or shorts) power indicator flashes. Option to “remember” an intermittent loop failure also available. Delay: can be selected to ignore fast moving vehicles over the loop. Extension: extends a call for slow moving vehicles.

SHIPPING WEIGHT PART NUMBER PRICE

1 lb (.5 kg) 2667 $130

* Measurements and weights stated in this Price List are approximate. For exact specifications, please refer to the Installation Manual or contact our technical department at 1-800-221-8278.

111

Accessories Entry Systems and Security Devices Loops and Loop Detectors Note: A rule of thumb for determining the height of a loop’s inductive field is: the height of the inductive field is 2/3 the length of the loop’s shortest side.

Saw-Cut Loops 45. Saw Cut Loops with 30 ft (9.1 m) Twisted Pair Lead-in 18 gauge, XLP insulation

Loop Size

Shipping Weight

Part Number

Price

2 ft x 6 ft (0.6 m x 1.8 m)

4 lb (1.8 kg)

2590

$124

4 ft x 6 ft (1.2 m x 1.8 m)

4 lb (1.8 kg)

2591

$158

4 ft x 8 ft (1.2 m x 2.4 m)

4 lb (1.8 kg)

2567

$174

4 ft x 10 ft (1.2 m x 3.0 m)

4 lb (1.8 kg)

2592

$191

6 ft x 12 ft (1.8 m x 3.7 m)

4 lb (1.8 kg)

2569

$224 Saw Cut Loop

Note: Other loop sizes, lead-in lengths, 14 Gauge Wire, and PVC Insulation are available on request.

46. Saw Cut Loops with 50 ft (15 m ) Twisted Pair Lead-in 18 gauge, XLP insulation

Loop Size

Shipping Weight

Part Number

Price

4 ft x 6 ft (1.2 m x 1.8 m)

5 lb (2.3 kg)

2562

$177

4 ft x 8 ft (1.2 m x 2.4 m)

5 lb (2.3 kg)

2566

$194

Saw Cut Loop Note: Other loop sizes, lead-in lengths, 14 Gauge Wire, and PVC Insulation are available on request.

* Measurements and weights stated in this Price List are approximate. For exact specifications, please refer to the Installation Manual or contact our technical department at 1-800-221-8278.

112

Accessories Entry Systems and Security Devices Loops and Loop Detectors 47. Loop Sealant for Saw Cut Loops 30 fl. oz. (0.9 L) caulking cartridge

Note: the thickness of the loop wire in the preceding #43 and #44 is .13 in. (0.32 cm). The wireâ&#x20AC;&#x2122;s height ranges from .55 in. (1.4 cm) to .34 in. (0.86 cm).

Linear Feet of Coverage for One Cartridge Saw Cut Width in Inches Saw Cut Depth in Inches .13 .2 .25

Linear Meters of Coverage for One Cartridge Saw Cut Width in cm Saw Cut Depth in cm 0.3 0.5 0.6

1.3

36 ft

24 ft

18 ft

9 ft

2.5

11 m

7.3 m

5.5 m

2.7 m

1.5

24 ft

18 ft

12 ft

6 ft

3.8

7.3 m

5.5 m

3.7 m

1.8 m

18 ft

12 ft

9 ft

4.5 ft

5.1

5.5 m

3.7 m

2.7 m

1.4 m

Quantity

Shipping Weight

Part Number

Price

Grey Sealant

3 lb (1.4 kg)

2166

$80

Black Sealant

3 lb (1.4 kg)

2180

$80

Pave-Over Loops 48. .5 in. (1.24 cm) Flexible Conduit Pave-Over Style Loops with 30 ft (9.1 m) Twisted Pair Lead-in

Loop Size

Shipping Weight

Part Number

Price

2 ft x 6 ft (0.6 m x 1.8 m)

4 lb (1.8 kg)

2593

$172

4 ft x 6 ft (1.2 m x 1.8 m)

4 lb (1.8 kg)

2594

$190

4 ft x 8 ft (1.2 m x 2.4 m)

4 lb (1.8 kg)

2595

$199

4 ft x 10 ft (1.2 m x 3.0 m)

4 lb (1.8 kg)

2596

$212

6 ft x 12 ft (1.8 m x 3.7 m)

4 lb (1.8 kg)

2597

$243

Note: Other loop sizes and lead-in lengths are available on request.

Pave-Over Loop

* Measurements and weights stated in this Price List are approximate. For exact specifications, please refer to the Installation Manual or contact our technical department at 1-800-221-8278.

113

Accessories Entry Systems and Security Devices Loops and Loop Detectors 49. .5 in. (1.24 cm) Flexible Conduit Pave-Over Style Loops with 50 ft (15 m) Twisted Pair Lead-in

Size

Shipping Weight

Part Number

Loop Price

2 ft x 6 ft (0.6 m x 1.8 m)

5 lb (2.3 kg)

2561

$190

4 ft x 6 ft (1.2 m x 1.8 m)

5 lb (2.3 kg)

2560

$209

4 ft x 8 ft (1.2 m x 2.4 m)

5 lb (2.3 kg)

2559

$218

4 ft x 10 ft (1.2 m x 3.0 m)

5 lb (2.3 kg)

2558

$230

6 ft x 12 ft (1.8 m x 3.7 m)

5 lb (2.3 kg)

2557

$261

50. .5 in. (1.24 cm) Flexible Conduit for Lead-in Protection

Size

Shipping Weight

Part Number

Length

50 ft

5 lb (2.3 kg)

2603

Call for Pricing

Price

* Measurements and weights stated in this Price List are approximate. For exact specifications, please refer to the Installation Manual or contact our technical department at 1-800-221-8278.

114

Accessories Entry Systems and Security Devices Locks 52. FAAC Single Cylinder Electric Lock Features: .Required power supply: 12 VAC pulsed (available on FAAC control panels.) .Manual keyed operation from one side of the gate .3 keys provided .Strike plate included

SHIPPING WEIGHT PART NUMBER PRICE

6 lb (2.7 kg) 712650/712651* $196 Single Cylinder Electric Lock (strike plate not pictured)

53. FAAC Double Cylinder Electric Lock Features: .Required power supply: 12 VAC pulsed (available on FAAC control panels.) .Manual keyed operation from both sides of the gate .6 keys provided .Strike plate included)

SHIPPING WEIGHT PART NUMBER PRICE

6 lb (2.7 kg) 712650/712652* $220

Side assembly of electric lock for 1-leaf gate

1 Electric lock 2 Base plate 3 Strike plate 4 Side rabbet ledge 5 Spring latch 6 Through cylinder and barrel (double cylinder electric lock only) 7 Pilot 8 Sliding guide 9 Cover plate NOTE: Items 4,7,8,& 9 are not included with lock.

Double Cylinder Electric Lock (strike plate not pictured)

.2 in. (.5 cm)

1.5 in. (3.6 cm)

5 in. (12.4 cm)

4 in. (10 cm) .2 in. (.5 cm)

6 in. (14.9 cm)

* Measurements and weights stated in this Price List are approximate. For exact specifications, please refer to the Installation Manual or contact our technical department at 1-800-221-8278.

115

Accessories Entry Systems and Security Devices Locks 54. Securitron Model M62-GF Electromagnetic Lock Features: .Required power supply: 24 VDC (available on FAAC control panels.) .Holding force: 1200 lb (540 kg) .Conduit connector: Universal .5 in. ID (female) .75 in. OD (male) .Four mounting holes on the face of the lock .Strike plate .Attachment hardware Dimensions: 8 in. wide x 1.75 in. deep x 2.9 in. high (20.3 cm x 4.4 cm x 7.4 cm) The Securitron Model M62-GF Electromagnetic Lock requires the following additional equipment (priced separately) when used with a FAAC control panel: 12 VAC External Relay (See #55 below)

SHIPPING WEIGHT PART NUMBER PRICE

14 lb (6.4 kg) 2353 $742

Z BRACKET PART NUMBER PRICE

2690 $186

.1 in. (.26 cm)

55. 12 VAC External Relay Use with MAG lock

.52 in. (1.3 cm) 1.07 in. (2.8 cm)

.12 in. x .05 in. (.3 x .12 cm) hole

1.5 in. (3.8 cm)

1 lb (.5 kg) 2630 $52

1.7 in. (4.4 cm)

SHIPPING WEIGHT PART NUMBER PRICE

Model M62-GF Electromagnetic Lock (strike plate not pictured)

.02 in. .16 (.05in. cm) (.42 cm) .25 in. (.64 cm) .25 in. (.65 cm) .21 in. .08 in. (.55 cm) (.2 cm)

.14 in. (.35 cm) 1.4 in. (3.6 cm) or less

.84 in. (2.2 cm)

12 VAC External Relay

* Measurements and weights stated in this Price List are approximate. For exact specifications, please refer to the Installation Manual or contact our technical department at 1-800-221-8278.

116

Accessories Entry Systems and Security Devices 56. Securitron Model M32F-24 Electromagnetic Lock Features: .Required power supply: 24 VDC (available on FAAC control panels.) .Holding force: 600 lb (270 kg) .Two mounting holes on the face of the lock .Strike plate .Attachment hardware Dimensions: 8 in. wide x 1.5 in. deep x 1.88 in. high (20.3 cm x 3.8 cm x 4.8 cm) The Securitron Model M32F Electromagnetic Lock requires the following additional equipment (priced separately) when used with a FAAC control panel: 12 VAC External Relay (See #55 on P. 140)

SHIPPING WEIGHT PART NUMBER PRICE

12 lb (5.4 kg) 2354 $534

Z BRACKET PART NUMBER PRICE

3150 $178

Model 32F Electromagnetic Lock (strike plate not pictured)

Warning Lights 57. FAACLamp Connects to FAAC 115 VAC or 230 VAC control panels; please specify voltage when ordering. .Amber light flashes while gate opens and closes Dimensions: 4 in. x 4.5 in. (5.5 in. including base) x 5 in. (10 cm x 11.5 cm [14.2 cm] x 13 cm)

SHIPPING WEIGHT PART NUMBER PART NUMBER PRICE

1.1 lb (.5 kg) 410013 (230 VAC) 410013* (115 VAC) $65

REPLACEMENT BULB

2128 (230 VAC) 2132 (115 VAC) $15

PRICE

FAACLamp

* Measurements and weights stated in this Price List are approximate. For exact specifications, please refer to the Installation Manual or contact our technical department at 1-800-221-8278.

117

Accessories

Electrical and Hardware

Timers 58. Grasslin Digi 20-A-24 24hr 7 day Time Switch Features: .Required power supply: 24 VAC or 24 VDC (available on FAAC control panels) .Output relay rating: 277 VAC, 16A .Output relay: Single Pole Double Throw .Signals up to 20 times per timing period .Maximum timing period: 1 week .Minimum time between signals: 1 minute .Daylight time change over: Manual .Manual override

SHIPPING WEIGHT PART NUMBER PRICE

Grasslin Digi 20-A-24 Time Switch

2 lb (1 kg) 2144 $304

60. Transformer/Step-up-Step Down .120 VAC > 240 VAC .240 VAC > 120 VAC .500 VA .Enclosure 3R outdoor .UL/CSA Listed Dimensions will not exceed: 4.5 in. wide x 9.5 in. high x 4 in. deep Note: Position of mounting tabs on case may vary

SHIPPING WEIGHT PART NUMBER PRICE

17 lb (7.7 kg) 2199 $466

Transformer

* Measurements and weights stated in this Price List are approximate. For exact specifications, please refer to the Installation Manual or contact our technical department at 1-800-221-8278.

118

Accessories

Electrical and Hardware

Ditek Surge Protection Ditek surge protectors detect potentially harmful surges in electrical current and re-direct these surges to ground. 61. Hard Wired Protection for 110/125 VAC circuits

. Self-restoring after each surge within ratings . .5 in. conduit connector provided Dimensions: 3 in. wide x 1.9 in. high x 1.5 in. deep (7.6 cm x 4.8 cm x 3.8 cm)

SHIPPING WEIGHT PART NUMBER PRICE

2 lb (1 kg) 2355 $135

62. Hard Wired Protection for 220 VAC Single Phase Circuits

. Self-restoring after each surge within ratings . .5 in. conduit connector provided

Dimensions: 4 in. wide x 2 in. high x 2 in. deep (10.2 cm x 5.1 cm x 5.1 cm)

SHIPPING WEIGHT PART NUMBER PRICE

Ditek Surge Protector for 110/125/220 VAC circuits (115 version shown; 220 version has similar configuration, but larger dimensions)

2 lb (1 kg) 2356 $168

63. Screw Terminal Connection Protection for Low Voltage Power Loop, Voice, and Data Circuits

. Provides protection for power, data, LED and audible circuits . One model protects 5V, 12V and 24V circuits . Self-restoring after each surge within ratings

Dimensions: 3 in. wide x 1.6 in. high x 1.6 in. deep (7.6 cm x 4 cm x 4 cm)

SHIPPING WEIGHT PART NUMBER PRICE

2 lb (1 kg) 2357 $175

Ditek Surge Protector for Low-Voltage Circuits

* Measurements and weights stated in this Price List are approximate. For exact specifications, please refer to the Installation Manual or contact our technical department at 1-800-221-8278.

119

Accessories Electrical and Hardware Enclosures 64. Model FRP (Fiber Reinforced Plastic) Enclosure

10 in. (25.4 cm)

5.5 in. (14 cm)

The Model FRP is ideal for applications that require an enclosure that is extremely tough. Strong, highest quality construction Rubberized gasket door seal Includes metal mounting plate with grounding lug UL and CSA Listed Two .9 in. (2.2 cm) pre-drilled holes in box bottom

. . . . .

SHIPPING WEIGHT PART NUMBER PRICE

6 lb (2.7 kg) 2359 $218

65. Model L (Latching) Plastic Enclosure

. Keyed latch on hinged door . Rubberized gasket door seal . Door can open to right or left . Will accept DIN rail . Molded standoffs for control panel mounting . Three 1.13 in. (30 mm) pre-drilled holes (with plugs) in box bottom . Two .75 in. (2 cm) knockouts in box bottom

SHIPPING WEIGHT PART NUMBER PRICE

12 in. (30.5 cm)

Model FRP enclosure

8.38 in . (21.3 cm )

4.65 in . (11.8 cm )

10.6 in. (27 cm)

5 lb (2.3 kg) 720118 $64 Plastic enclosure with lockable hinged cover

66. Model E (Economy) Plastic Enclosure

. Rubberized gasket door seal . Will accept DIN rail . Molded standoffs for control panel mounting . Three 1.13 in. (3 cm) pre-drilled holes (with plugs) in box bottom . Two .75 in. (2 cm) knockouts in box bottom

SHIPPING WEIGHT PART NUMBER PRICE

4 lb (1.8 kg) 720119 $42

3.3 (8.5 8 in. cm)

in. 2.2 cm) (5.6

8.0 (20. 3 in. 4 cm )

10.4 in. (26.5 cm)

Model E plastic enclosure * Measurements and weights stated in this Price List are approximate. For exact specifications, please refer to the Installation Manual or contact our technical department at 1-800-221-8278.

120

Accessories Electrical and Hardware Enclosures 67. 14 in. x 16 in. x 6 in. Fiber Reinforced Enclosure

. Hinged lockable . Strong, highest quality construction . Rubberized gasket door seal . Weather resistant . UL and CSA Listed . Two .9 in. (2.2 cm) pre-drilled holes in box bottom

W/backplate wired 115V

SHIPPING WEIGHT PART NUMBER PRICE

16 lb (7.3 kg) 3300 $500

Large Fiberglass Enclosure, opened and locked

W/backplate wired 230V

SHIPPING WEIGHT PART NUMBER PRICE

16 lb (7.3 kg) 3303 $500 Enclosure - no backplate

W/backplate wired 24 VDC

SHIPPING WEIGHT PART NUMBER PRICE

16 lb (7.3 kg) 3306 $500

16 lb (7.3 kg) 3312 $340

Mounting Post 68. Gooseneck Mounting Post Powder coated steel

. Height: 41.75 in. (106 cm) . Mounting face: 3.75 in. x 3.75 in. (9.5 cm x 9.5 cm) SHIPPING WEIGHT PART NUMBER PRICE

10 lb (4.5 kg) 2104 $165

.25 in. (.6 cm)

1.14 in. (2.9 cm)

1.9 in. (4.8 cm)

3.86 in. (9.8 cm)

5 in. (12.7 cm)

.75 in. (1.9 cm) .38 in. (1 cm)

5 in. (12.7 cm)

Gooseneck Faceprint

1.18 in. (3 cm)

Gooseneck Footprint

Universal Gooseneck

* Measurements and weights stated in this Price List are approximate. For exact specifications, please refer to the Installation Manual or contact our technical department at 1-800-221-8278.

121

Accessories Hinges 69. Guardian 2000 Large Standard Hinge, Prime Coated

New!

Ideal for heavy or high-traffic gates where reliability is essential. Features: Both sides mount to a flat weld surface Rated at 3,000 lbs per pair

. .

SHIPPING WEIGHT PART NUMBER PRICE

6 lb (2.7 kg) 3500 $152 Model 2000 Large Standard Hinge, Prime Coated

70. Guardian 2001 Small Standard Hinge, Prime Coated

New!

Ideal for heavy or high-traffic gates where reliability is essential. Features: Both sides mount to a flat weld surface Rated at 600 lbs per pair

. .

SHIPPING WEIGHT PART NUMBER PRICE

2.5 lb (1.1 kg) 3502 $103

* Measurements and weights stated in this Price List are approximate. For exact specifications, please refer to the Installation Manual or contact our technical department at 1-800-221-8278.

122

Accessories Hinges 71. Guardian 2040 Aluminum Standard Hinge

New!

Well suited for aluminum gates and for environments where rusting is a problem. Features: Both sides mount to a flat weld surface Rated at 400 lbs per pair

. .

SHIPPING WEIGHT PART NUMBER PRICE

2.5 lb (1.1 kg) 3504 Call for Pricing

72. Guardian 2045 Aluminum Bolt On Hinge

New!

Ideal for situations where welding is not desired and rusting is a problem. Features: Perfect for vinyl fences. Load bearing capacity dependent on attachment bolts used. (attachment bolts not included).

. .

SHIPPING WEIGHT PART NUMBER PRICE

3 lb (1.4 kg) 3506 Call for Pricing Model 2045 Aluminum Bolt On Hinge

123

Visit us online at

www.faacusa.com

Exploded Views & Pricing 412 . . . . . . . . . . . . . . . . . . . . . . . 126 415 . . . . . . . . . . . . . . . . . . . . . . . 127 400 . . . . . . . . . . . . . . . . . . . . . . . 128 402 . . . . . . . . . . . . . . . . . . . . . . . 132 422 . . . . . . . . . . . . . . . . . . . . . . . 134 750 . . . . . . . . . . . . . . . . . . . . . . . 136 760 . . . . . . . . . . . . . . . . . . . . . . . 139 620 . . . . . . . . . . . . . . . . . . . . . . . 143 640 . . . . . . . . . . . . . . . . . . . . . . . 145 620/640 Articulated Kit . . . . . . . . 147 620/640 Beam Skirt Kit. . . . . . . . 147

Exploded Views

Model Model Model Model Model Model Model Model Model Model Model

125

Exploded View, Model 412

POS

PART NO

DESCRIPTION

QTY

LIST PRICE

POS

PART NO

DESCRIPTION

QTY LIST PRICE

1 1 2 3 3

799360 799359 713009 7171345 7171335

Motor Housing, SX Top Section Motor Housing, DX Top Section Manual Release Key, 412 Flange, Protective Cover, 412 SX Flange, Protective Cover, 412 DX

1 1 1 1 1

151.00 151.00 8.00 14.00 14.00

10 10 11 12 13

2705 2707 727216 722298 N/A

Capacitor for 115V (25uf) Capacitor for 220V (8uf) Protective Cover, 412 Protective Cover Support, 412 Self Tapping Screw (5 x 18mm)

1 1 1 1 4

10.00 8.00 68.00 16.00 N/A

N/A

799358

Nickel Plated Self Tapping Screw (3.5 x 13mm) Self-Tapping Screw (5.5 x 15mm) Cylinder Collar

18.00

14 15 15 16 17

716056 746030 746755 746028 N/A

Motor Housing, Bottom Section Stator (Motor) for 220V Stator (Motor) for 115V Rotor (Motor) Strain Relief, 412

1 1 1 1 1

40.00 98.00 113.00 70.00 N/A

7 8 8 9

736060 727148 727147 N/A

Cylinder Assembly New End Cap, Protective Cover SX End Cap, Protective Cover DX Nickel Plated Self-Tapping Screw (3.5 x 9.5mm)

1 1 1 3

169.00 6.00 6.00 N/A

390009

Skin Pack, 412 (1 pack = 2 operators)

115.00

126

BLOW-UP VIEW, MODEL 415

POS PART NO

DESCRIPTION

QTY

LIST PRICE

POS PART NO

1 2 3 4 5 6 7 8 9 9

7220015 7284005 718366 7182075 N/A 7228015 716148 428403 60202145 N/A

Rear Mounting Bracket Rear Mounting Plate Long Pin With C Clips Short Pin Hex Nut Rear Fork Rear Upper Body Manual Release Assembly Snap Ring Nickel Plated Self Tapping Screw

1 1 1 1 1 1 1 1 1 1

31.00 16.00 14.00 11.00 N/A 33.00 61.00 60.00 40.00 N/A

16 17 18 19 20

10 11 12 13 14

60202155 716150 490108 718354 N/A

Manual Release Lever Limit Switch Protective Cover Limit Switch Assembly Front Mounting Pin w/ C Clips Self Tapping Screws (4.2mm x 13mm)

1 1 1 1 7

Front Mounting Bracket

15 728271

711027 490104 718367 499399 N/A

DESCRIPTION

QTY LIST PRICE

Limit Switch Adjusters Cover Cylinder Screw Drive Pin and C Clips Lower Front Cover Self Tapping Screw (6.3mm x 19mm)

1 1 1 1 8

14.00 110.00 2.00 20.00 N/A

1 10

65.00 N/A

23 60202165 24 60202215

Gear (Piston) Self Tapping Screw (4.8mm x 13mm) Bushing Gear (Motor)

2 1

14.00 82.00

14.00 67.00 94.00 6.00 N/A

25 26 27 28 29

Motor 115Vac Gasket Electric Cable Cover Rear Body Lower Half 25uf Capacitor

1 1 1 1 1

194.00 14.00 28.00 63.00 10.00

37.00

30 490106

Skin Pack 415 L LS

61.00

21 60202225 22 N/A

770890 709324 60202175 716149 2705

127

MODEL 400 BLOW UP AND PARTS LIST POS

128

PART NO

DESCRIPTION

QTY

LIST PRICE

POS 32 33 34 35 35a

3060 2069 7073095 7220355 7220365

Washer (Swivel) Swivel Jam Nut (10mm) Swivel Joint square Front Mounting Bracket Front Mounting Bracket (Long E/G)

1 1 1 1 1

2.00 4.00 69.00 26.00 29.00

36 37 38 38a 39 40 40a

N/A 7119405 7019195 7019225 4170015 7272105 7272115

Star Washer (5mm) Protective Cover End Cap Plug Tie-Rod (Protective Cover) Tie-Rod (Protective Cover Long/EG) Protective Cover End Cap Protective Cover Protective Cover (Long/EG)

2 2 2 2 2 1 1

N/A 2.00 5.00 7.00 13.00 52.00 63.00

41 41a 42 43 44** 45

3900985 3900975 2167+ 6115+* 2707 7228015+

Skin Pack: 400 Skin Pack: 400 EG Seal Kit Oil: 1 qt. Capacitor 8uF: 220V Aluminum Fork Kit

1 1 1 1 1 1

134.00 134.00 73.00 21.00 8.00 56.00

1 2 3 4 5

2036 7220015 7284005 7182075 7228015

Galvanized Nut (8mm) Rear Bracket Rear Bracket Plate Short Pin Rear Fork

1 1 1 1 1

3.00 31.00 16.00 11.00 33.00

6 8 9 10 11

2037 70991015 490325 N/A 7119475

Self-Locking Nut (8 mm) Gasket (D80) Locking Cap Kit Self Threading Screw (4mm) Vibration Dampener

1 2 1 1 2

3.00 4.00 58.00 N/A 3.00

12 13 14 15* 16

2365 2366 2367 77000425 7119485

Motor Bolt (4x50 mm) Lock Washer (4 mm) Hex Nut (4 mm) 115V 1400 RPM Motor Vibration Dampener

4 4 4 4 2

3.00 3.00 3.00 167.00 3.00

17 17a 18 19 20 21

7161825 7161835 N/A 7182175 N/A 7110015

Operator Body 400 Operator Body (Long/EG)

1 1 1 1 4 1

90.00 104.00 N/A 12.00 N/A 2.00

22 23 29 30 31

2274 7094065 3204425 N/A 7090010015

3 3 1 1 3

4.00 2.00 158.00 N/A 2.00

Vent Scre Label Long Pin T20 Torx (5 x 20mm) Oil Plug Vent Screw (4x6 mm) Gasket (copper) 1 Lt. Lobe Pump Pump Pin (4x28mm) O-Ring

PART NO

DESCRIPTION

QTY

LIST PRICE

* 220VAC 8 uF Motor Part Number is 7790205 167.00 * 220VAC 16 uF Motor Part Number is 7700045 167.00 ** 16uF Capacitor for use with 220VAC Motor. Part #: 2706 8.00 ** 25uF Capacitor for use with 115VAC Motor. Part #: 2705 16.00

MODEL 400 BLOW UP AND PARTS LIST

POS

129

PART NO

DESCRIPTION

QTY

LIST PRICE

4.00 N/A

1 2 3 4 5

7049005 N/A 4404065 7049005 4404085

Valve Retainer O-Ring Inlet Valve Retainer (Brass) Lock Valve (Bi-Metal)

1 2 4 2

5.00 4.00 8.00

6 7 7a 8 9 10

4994345 7230295 7230305 N/A N/A 4180285

Valve Body (CBAC) Tie-Rod (Cylinder) Tie-Rod (Cylinder) (Long/EG) Star Washer (5 mm) O-Ring (Shuttle Piston) Shuttle Piston

1 4 4 4 1 1

217.00 6.00 8.00 N/A N/A 15.00

11 11a 12 13 13a 14 15

7366025 7366015 7091015 4350105 4350115 4994625 N/A

Cylinder Cylinder (Long/EG) Piston Rod Seals Piston Rod Assembly Piston Rod Assembly (Long/EG) Front Flange Front Flange Bolt (5 x 20 mm)

1 1 2 1 1 1 1

59.00 65.00 6.00 87.00 99.00 78.00 N/A

16 17 18 19 20 21

N/A 7090360025 7090815 7049005 7361335 4180415

O-Ring Front Flange (Internal) O-Ring (Valve Body) O-Ring (Retract Tube 06’) Guide Ring (Piston) Retract Tube By-Pass Cap Assembly

1 2 2 1 1 2

N/A 3.00 3.00 4.00 24.00 12.00

22 23 24 25 26 27 28

4180415 4180415 7090280015 N/A 4180195 4180415 4404095

By-Pass Cap Assembly By-Pass Cap Assembly O-Ring (Manual Release) Spacer (Manual Release) Manual Release Bi-Pass Assembly (06’) Inlet Valve (Bi-Directional)

2 2 1 1 1 2 1

12.00 12.00 2.00 4.00 15.00 12.00 14.00

MODEL 400 LOCKING CAP PARTS LIST

POS 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18

130

PART NO 2151 7290445 N/A N/A N/A 7090290015 N/A 7131005 7275275 7090855 N/A 7090865 N/A N/A 7090845 490327 490326 4185045

DESCRIPTION Knob Screw (ss) 4mm x 8mm Manual Release Knob w/ screw Screw (ss) 4mm x 10mm Locking Cap Base Lock O-Ring (Lock Cylinder) Top Cover Key (Viro) Cover, Key O-Ring (Base to Body) Extension Receptacle O-Ring Extension Receptacle By-Pass Extensions Manual Release Extensions O-Ring, Extensions Extensions with O-Rings Manual Release Kit Locking Cap Complete

QTY

LIST PRICE

1 1 3 1 1 1 1 1 1 1 1 1 2 1 3 3 1 1

2.00 9.00 N/A N/A N/A 2.00 N/A 4.00 3.00 2.00 N/A 2.00 N/A N/A 3.00 26.00 31.00 39.00

MODEL 400 REAR FLANGE PARTS LIST

POS

131

PART NO

DESCRIPTION

QTY

LIST PRICE

1 2 3 4 5

7171485 417010 63001005 N/A 7110015

Flange (Rear 08’)Manual Release Wiring Harness (08’) Electric Cable O-Ring (18x1 mm) Plug (oil fill)

1 1 1 1 1

59.00 18.00 61.00 N/A 2.00

6 7 8 9

7109135 N/A N/A 7090725

Cable support anti-kink (plastic) Screw (3x12 mm) Screw (3x8 mm) O-Ring (Internal Harness)

1 1 1 1

5.00 N/A N/A 1.00

BLOW-UP VIEW, MODEL 402 CBC

132

MODEL 402 CBC PARTS LIST POS

PART NO

DESCRIPTION

QTY

List Price

POS

PART NO

DESCRIPTION

QTY

List Price

1 2 3 4 5

2036 7220015 7284005 7182075 7228015

Galvanized Nut (8mm) Rear Bracket Rear Bracket Plate Short Pin Rear Fork (Alum)

1 1 1 1 1

3.00 31.00 16.00 11.00 33.00

101 102 103 104 105

4404065 N/A 7049005 4180205 4180395

Inlet Valve O-Ring Valve Retainer Black Lock Valve Brass By-Pass Valve

2 5 2 1 1

5.00 N/A 4.00 4.00 8.00

6 7* 8* 9* 10*

2037 7109235 7109235 7039305 2581

Self-Locking Nut (8mm) Strain Relief Strain Relief Nut Strain Relief Brass Washer Fiber Washer

1 1 1 1 1

3.00 17.00 17.00 3.00 3.00

106 107 108 109 110

4180395 4180395 4180395 4180395 7090350025

Brass By-Pass Valve O-Ring (By-Pass Valve) By-Pass Spring By-Pass Seat O-Ring (Front Flange)

1 2 2 2 2

8.00 8.00 8.00 8.00 3.00

11 12 13 14 15

7514055 7170435 70991015 7450005 N/A

Electric Power Cord Rear Flange Gasket (D80) Operator Body Self-Threading Screw

1 1 2 1 1

37.00 58.00 4.00 73.00 N/A

111 112 113 114 115

7090665 7361315 7230225 N/A N/A

O-Ring (Alum Retract Tube) Retract Tube (Alum) Tie-Rod (Cylinder) O-Ring (Front Flange Internal) Star Washer

2 1 4 1 4

3.00 29.00 5.00 N/A N/A

16 7119475 17 2365 18 2366 19 2367 20** 77000425

Vibration Dampener Motor Bolt (4mmx50) Lock Washer Hex Nut (4mm) 115V 1400RPM Motor

2 1 1 8 1

3.00 3.00 3.00 3.00 167.00

116 117 118 119 120

4994165 4350065 7095035 7366065 7271555

Front Flange Piston Assembly Piston Rod Packing Cylinder Protective Cover Guide

1 1 1 1 1

60.00 91.00 16.00 66.00 3.00

21 22 23 24 25

7119485 N/A 7182175 N/A N/A

Vibration Dampener Vent Screw Label Long Pin Socket Head Screw (5x20mm) Plug (Oil)

2 1 1 8 1

3.00 N/A 12.00 N/A N/A

121 122 123 124 125

N/A 4180285 4404085 4180355 713002

O-Ring (Shuttle Piston Shuttle Piston Lock Valve Manual Release Triangular Release Key

1 1 1 1 1

N/A 15.00 8.00 15.00 4.00

26 27 28 29 30

2274 7094065 3204425 N/A N/A

Vent Screw (4x6mm) Gasket (Copper) 1 Lt Lobe Pump Pump Pin By-Pass Protection Cover

1 1 1 2 1

4.00 2.00 158.00 N/A N/A

126 127 128 129 130 130

N/A 4180355 4994365 7049005 3905235 3906145

Galvanized Screw O-Ring (Manual Release) Valve Body (CBC) Brass Retainer Skin Pack (Double) Skin Pack (Single)

1 1 1 1 1 1

N/A 15.00 217.00 4.00 130.00 77.00

31 32 33 34 35

N/A 7271545 7114025 7272085 4304015

Spacers (Protective Cover) Protective Cover End Cap Protective Cover Plug Protective Cover Front Mounting Bracket

2 1 1 1 1

N/A 4.00 2.00 61.00 16.00

Seal Kit 1 Qt. Monolec Oil

1 1

101.00 21.00

36 37 38 39

7182355 N/A 7090010015 N/A

Pin Front Bracket Black Plastic Screw O-Ring (3) Stainless Steel Screw (2.9mm x 6.5mm)

1 1 3 2

4.00 N/A 2.00 N/A

131 2168* 132 6115*

* 7109235 Included in kit ** 77000415 220V Motor - 16 uf capacitor ** 7700205 220V Motor - 8 uf capacitor

133

134

MODEL 422 PARTS LIST POS 1 2 3 4 5 6 7 8 9 10

PART NO 2036 7220015 7284005 7182075 7228015 2037 7170685 70991015 7090440015 7090655

11 12 13 14 15

DESCRIPTION

QTY

LIST PRICE

Galvanized Nut (8mm) Rear Bracket Rear Bracket Plate Short Pin Rear Fork Self-Locking Nut (8 mm) Rear Flange Gasket (D80) O-Ring Locking Cap (Small) O-Ring Locking Cap (Center)

1 1 1 1 1 1 1 2 2 1

3.00 31.00 16.00 11.00 33.00 3.00 61.00 4.00 2.00 3.00

41850215 7094065 2274 7270805 7270815 16 7131005 17 N/A 18 7119475 19 2365 20 2366 21 2367 22** 77000425 23 7119485 24 309005 25 N/A 26 7182175 27 2274 28 N/A 29 751405 30* 2581

Locking Cap Gasket (Copper) Vent Screw (4x6 mm) Locking Cap Cover Access Slide (Locking Cap)

1 3 3 1 1

59.00 2.00 4.00 17.00 7.00

Viro Key (Manual Release) Self Threading Screw (4mm) Vibration Dampener Motor Bolt (4x50 mm) Lock Washer Hex Nut (4 mm) 115V 1400 RPM Motor Vibration Dampener Operator Body Vent Screw Label Long Pin Vent Screw (4x6 mm) Socket Head Screw (5x20 mm) Electric Powwer Cord Fiber Washer

1 1 2 4 4 4 1 2 1 1 1 3 8 1 1

4.00 N/A 3.00 3.00 3.00 3.00 167.00 3.00 72.00 N/A 12.00 4.00 N/A 37.00 3.00

31* 32* 33* 34 35

7039305 7109235 7109235 3204425 N/A

Strain Relief Brass Washer Strain Relief Nut Strain Relief 1 Lt. Lobe Pump Pump Pin

1 1 1 1 2

3..00 17.00 17.00 158.00 N/A

36 37 38 39 40 41 42 43 44 101 102 103 104 105 106

N/A 4900605 7271545 7114025 7272125 7220515 4900605 N/A 7090010015 7090010015 7049005 4404065 4180035 4180045 4180035

Spacers (Protective Cover) Swivel Joint Protective Cover End Cap Protective Cover Plug Protective Cover Front Mounting Bracket Swivel Joint Kit Self Threading Screw O-Ring O-Ring Valve Retainer Inlet Valve Red By-Pass Cap Assembly By-Pass Cap (Red)

2 1 1 1 1 1 1 1 3 6 2 2 1 1 1

42.00 4.00 2.00 63.00 16.00 44.00 N/A 2.00 2.00 4.00 5.00 4.00 4.00 4.00

107 108 109 110 111 112

4180035 4180045 4180045 7090280015 4180195 4180195

By-Pass Spring By-Pass Cap By-Pass Cap (Green) O-Ring Retract Tube (Short) Extrusion Ring Manual Release

2 2 1 3 1 1

4.00 4.00 4.00 2.00 15.00 15.00

Green By-Pass Cap Assembly

N/A

POS

PART NO

113 115 116 117

7090360025 7090350025 7090665 7361315

118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136

7230225 N/A N/A 4994165 4350085 7095035 7366065 7271555 499449 4404085 4180285 4180285 N/A N/A 4994345 7049005 3905325 2172* 6115*

* 7109235 ** 77000415 ** 7700205

POS

DESCRIPTION

QTY

LIST PRICE

O-Ring (Valve Body) O-Ring (Mid-Flange) O-Ring Retract Tube (Long) Retract Tube (Long)

1 2 2 1

3.00 3.00 3.00 29.00

Tie-Rod ( Cylinder) O-Ring Front Flange (Internal) Star Washer Front Flange Piston Assembly Piston Rod Packing Cylinder Protective Cover Guide Mid Flange Lock Valve Shuttle Piston O-Ring (Shuttle Piston) Galvanized Washer Galvanized Screw Valve Body (CBAC) Valve Retainer Skin Pack - Single Seal Kit 1 Qt. Monolec Oil

4 1 4 1 1 1 1 1 1 2 1 1 4 4 1 2 1 1 1

5.00 N/A N/A 60.00 85.00 16.00 66.00 3.00 61.00 8.00 15.00 15.00 N/A N/A 21700 4.00 116.00 104.00 21.00

QTY

LIST PRICE

Included In Kit 220V Motor - 16 uf capacitor 220V Motor - 8 uf capacitor

PART NO

DESCRIPTION

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

2151 7290445 N/A N/A N/A 7090290015 N/A 7131005 7275275 7090855 N/A 7090865 N/A N/A 7090845

Knob Screw (SS) 4mm x 8mm Manual Release Knob Screw (SS) 4mm x 10mm Locking Cap Base Lock O-Ring (Lock Cylinder) Top Key (Viro) Cover, Key O-Ring (Base to Body) Extension Receptacle O-Ring Extension Receptacle By-Pass Extensions Manual Release Extension O-Ring, Extensions

1 1 3 1 1 1 1 1 1 1 1 1 2 1 3

2.00 9.00 N/A N/A N/A 2.00 N/A 4.00 3.00 2.00 N/A 2.00 N/A N/A 3.00

16 17 18 19

490327 490326 4185045 490325

Extensions with O-Rings Manual Release Kit Locking Cap Complete Locking Cap with Manual Release System

3 1 1 1

26.00 N/A 39.00 58.00

7161815

Operator Body (New)

59.00

135

BLOW-UP VIEW, MODEL 750

POS

QTY

LIST PRICE

1 2 3 4 5

N/A N/A 7091045 7350155 7193055

PART NO

Bolt (10mm x 25mm) Lock Washer Piston Ring Piston 750 Rack (100 Degree)

DESCRIPTION

2 2 2 2 1

N/A N/A 10.00 37.00 96.00

6 7 8 9 10

N/A 7099195 N/A 2339 2481

O-Ring (26.7mm x 1.78mm) Gasket Cylinder FBushing Bearing Thrust Bearing (6006)

2 2 2 1 2

N/A 4.00 N/A 85.00 107.00

11 12 13 14 15

7191525 2550 7093035 7309095 7039125

Pinion Snap Ring Seal (Top) Splined Collar Dust Cover

1 1 1 1 1

169.00 6.00 13.00 29.00 9.00

16 17 18

7280445 7270415 N/A

1 1 6

3.00 61.00 N/A

N/A

Cover Plate Box Lid (750 Half Box) Self-Tapping Screw Stainless Steel (3.9mm x 9.5mm) Lock Washer (Stainless Steel)

N/A

POS

QTY

LIST PRICE

20 21 22 23** 24

7223205 N/A N/A 7366245 N/A

PART NO

Half Box Bolt (8mm 100mm) Lock Washer Cylinder (100 Degree) O-Ring (66.4mm x 1.78mm)

2 4 12 2 2

35.00 N/A N/A 65.00 N/A

25 26 27 28 29 30 31 32 33 34

7170275 7246025 7110045 7011075 710101002 7102025 N/A 7200165 7287515 701217

Flange (Right Side) Zert Fitting (Air Drain) Dust Cover (Zert Fitting) Bolt (8mm x 105mm) Elbow Ferrule Fitting O-Ring (50.52mm x 1.78mm) Bearing Cup (Bottom) Leveling Plate Leveling Bolt (12mm x 35mm)

38.00 5.00 2.00 6.00 24.00 3.00 N/A 32.00 73.00 5.00

35 36 37 38 39

7170285 7161745 39050915 2171* 6115*

Flange (Left Side) Body Skin Pack Seal Kit (750 Drive Unit) Monolec Oil (1 Qt)

1 2 2 8 2 2 1 1 1 4 1 1 1 1 1

* 7193065 ** 7366235

136

DESCRIPTION

750 Rack 180* 750 Cylinder 180*

95.00 73.00

38.00 180.00 32.00 77.00 21.00

BLOW UP, MODEL 750 CBAC

POS

PART NO

DESCRIPTION

QTY

LIST PRICE

POS

PART NO

DESCRIPTION

QTY

LIST PRICE

1 2* 3 4 5

3204435 77000425 7514125 7099315 7450115

Lobe Pump (.75 Lt) 115V 1400 RPM Motor Electric Power Cord Flange Gasket Body (Pump Housing)

1 1 1 2 1

158.00 167.00 49.00 5.00 61.00

29 30 31 32 33

N/A 7049005 4404065 4404085 7102055

O-Ring (10.82mm x 1.78mm) Lock Valve Retainer Inlet Valve Lock Valve Ferrule Fitting

6 2 2 2 2

N/A 4.00 5.00 7.00 3.00

6 7 8 9 10 11 12** 13** 14** 15

N/A 7094065 2274 7270531 N/A N/A 2581 7039305 7109235 7112055

Vent Screw Diagram Washer (7mm x 4mm x 1mm) Vent Screw (4mm x 6mm) Flange (Upper) Lock Washer Screw (6mm x 10mm) Fiber Washer Washer (Brass) Nut (Strain Relief) Filler Cap (Dip Stick)

1 1 1 1 2 2 1 1 1 1

N/A 2.00 4.00 N/A N/A N/A 3.00 3.00 17.00 4.00

34 35 36 37 38 39

N/A 4180395 4180395 4180395 4180395 N/A

2 1 2 2 1 2

N/A 8.00 8.00 8.00 8.00 N/A

40 41 42

N/A 4180285 7090440015

Nut (12mm x 1mm) By Pass Cap (Brass) By Pass Cap Plug By Pass Spring By Pass Cap (Brass) Self Tapping Screw (2.9mm x 6.5mm) Screw (5mm x 8mm) Shuttle Piston O-Ring (7.6mm x 1.78mm)

2 1 1

N/A 15.00 2.00

16 17 18 19 20 21 22 23 24 25 26 27 28

N/A N/A 2274 2365 2366 2367 N/A 7090010015 7090030015 7290155 N/A N/A 4180225

Tie Rod Star Washer Vent Screw (Ground Screw) Motor Bolt (4mm x 50mm) Lock Washer Jam Nut Pin (Pump 4mm x 28mm) O-Ring (Pump 4.48mm x 1.78mm) O-Ring (6.75mm x 1.78mm) Manual Release Lever Washer (4mm x 12mm) Allen Bolt (4mm x 12mm) Manual Release

4 4 1 4 4

N/A N/A 4.00 3.00 3.00 3.00 N/A 2.00 2.00 5.00 N/A N/A 17.00

43 44 45 46 47

499445 7090150015 7049005 390700 390700

Valve Body O-Ring (9.25mm x 1.78mm) Lock Valve Retainer(Brass) Banjo Bolt Copper Washer

1 2 2 2 2

182.00 2.00 4.00 31.00 31.00 9.00 31.00 73.00 21.00

4 2 2 1 1 1 1 1

48 7110115 Gas Fittings 49 390700 Banjo Bolt Kit 50 2170* DSeal Kit 51 6115* Monolec Oil (1 Qt) * All included in kit #7109235 ** 220V 1400 RPM Motor Part #7700205 * 77000415 220V motor - 16ufcapacitor

2 1 1 1 167.00 167.00

137

BLOW-UP VIEW, MODEL 750 ENCLOSURE

MODEL 750 ENCLOSURE PARTS LIST POS

138

PART NO

N/A

2 3 4 5 6 7

N/A N/A N/A 7128035 713002 N/A

8 9 10

7309105 720309 N/A

DESCRIPTION

QTY

LIST PRICE

N/A N/A N/A N/A N/A 3.00 4.00 N/A 4.00

1 1 2

88.00 N/A N/A N/A N/A

2 1

N/A 4.00

11 12

N/A N/A

Self Tapping Screw (3.9mm x 9.5mm) Washer Snap Ring O-Ring (15.6mm x 1.78mm) Lock Body (Enclosure) Triangular Release Key Galvanized Self Topping Screw (2.9mm 9.5mm) Plastic Hinge 750 Enclosure Self Tapping Screw (4.8mm x 16.7mm) Washer Nut (Plastic)

13 14

N/A 709974

Plug (Plastic) Gasket (Lid)

1 1 1 1 1 1 1 1

BLOW-UP VIEW, MODEL 760

139

MODEL 760 PARTS LIST POS

PART NO.

DESCRIPTION

QTY

LIST PRICE

POS

PART NO.

DESCRIPTION

QTY

LIST PRICE

1 2 3 4 5 6 7 8 9 10

7019345 7011345 N/A 7201295 4246385 N/A N/A N/A 4180295 7099595

Mounting Bolt (Bottom) Mounting Bolt (Top) Stainless Steel Screw (Doghouse) Manual Release Housing Manual Release Rod Snap Ring Manual Release Rod End Retaining Pin Manual release Gasket (Manifold)

2 2 4 1 1 1 1 1 1 1

16.00 6.00 N/A 12.00 35.00 N/A N/A N/A 19.00 19.00

31 32 33 34 35 36 37 38 39 40

7366135 7099585 7350275 N/A 7246025 7110045 N/A N/A N/A 7094115

Cylinder Gasket (Cylinder) Ramping Piston O-Ring (Ramping Piston) Air Drain Valve Debris Cover O-Ring (Manual Release) Allen Head Bolt (Piston) Lock Washer RPiston (Red Internal)

2 2 2 2 2 2 1 2 2 2

95.00 5.00 36.00 N/A 5.00 2.00 N/A N/A N/A 12.00

11 12 13 14 15 16 17 18 19 20

N/A 499762 7039285 7110115 N/A N/A 7090150015 4180265 7090010015 7011355

Parallel Pin Manifold Copper Washer Banjo Bolt Lock Washer Allen Head Bolt O-Ring (With Part No. 18) Brass By-Pass Cap (Break) O-Ring Flange Bolt Stainless Steel

2 1 2 2 5 3 2 2 3 8

N/A 145.00 3.00 9.00 N/A N/A 2.00 19.00 2.00 9.00

41 42 43 44 45 46 47 48 49 50

7092025 7350275 7049195 7119485 N/A 7090380025 7193205 7160505 499761 N/A

Piston Seal Piston Piston Seal (Inner) Vibration Dampener Lock Washer (Coated) O-Ring (Rack) Rack Ram Body Flange (Non-Manifold) Allen Head Screw

2 2 2 2 4 2 1 1 1 2

14.00 36.00 22.00 3.00 N/A 3.00 116.00 107.00 376.00 N/A

21 22 23 24 25

N/A N/A N/A 499760 7361365

Lock Washer Jack Counter Nut Brass Jam Nut Snap Ring Flange (Manifold Side) Retract Tube

8 2 2 1 1

N/A N/A N/A 393.00 21.00

51 52 53 54 55

7224215 7099575 N/A N/A 7090665

Bracket (Pump to Drive) Gasket (Drive to Box) Self Tapping Screw Rack Protecting Cover O-Ring (Retracting Tube)

1 1 2 1 2

6.00 8.00 N/A N/A 3.00

26 27 28 29 30

N/A N/A 4404085 N/A 7090490025

Allen Head Screw O-Ring (With Part No. 28) Lock Valve Snap Ring O-Ring (Flange)

2 4 2 2 2

N/A N/A 8.00 N/A 3.00

56 57 58

3905515 2176* 6115*

Skin Pack (Mounting Hardware) Seal Kit 1 Qt. Monolec Oil

1 1 1

83.00 167.00 21.00

140

BLOW-UP, MODEL 760 CBAC

POS

PART NO

DESCRIPTION

QTY

LIST PRICE

POS 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33

1 2** 3 4 5 6 7* 8* 9* 10 11 12 13 14 15

3204435 77000425 7514125 7099315 7450115 7276025 2581 7039305 7109235 N/A 7230385 N/A 2274 2365 2366

Lobe Pump75 lt. 115v 1400 RPM Motor Electric Power Cord Flange Gasket Body (Pump Housing) Flange (Upper) Fiber Washer Strain Relief Brass Washer Strain Relief Nut Filler Cap Tie Rod Pump (760) Star Washer Stainless Steel Vent Screw (4mm x 8mm) Motor Bolt (4mm x 50mm) Lock Washer (4mm)

1 1 1 2 1 1 1 1 1 1 4 4 1 4 4

155.00 164.00 48.00 5.00 60.00 31.00 3.00 3.00 17.00 N/A 9.00 N/A 4.00 3.00 3.00

16 17 18

2367 Hex Nut (4mm) N/A Pump Pin (4mm x 28mm) 7090010015 O-Ring

4 2 2

3.00 N/A 2.00

PART NO N/A 4404065 N/A 4404085 4180395 4180395 4180395 4180395 N/A 4994075 N/A 4180285 7049005 2170* 6115*

DESCRIPTION O-Ring Inlet Valve Valve Retainer Lock Valve Green By-Pass Cap Red By-Pass Cap By-Pass Cap By-Pass Spring O-Ring (By-Pass Cap) Valve Body O-Ring (Shuttle Piston) Shuttle Piston Valve Retainer (Brass) Seal Kit 1 Qt Monolec Oil

* 7109235 Included in Kit * 77000415 220V Motor 16 uf Capacitor * 7700205 220V Motor 8 uf Capacitor

QTY

LIST PRICE

6 2 2 2 1 1 2 2 2 1 1 1 2 1 1

N/A 5.00 N/A 8.00 8.00 8.00 8.00 8.00 N/A 155.00 N/A 15.00 4.00 72.00 21.00

17.00 164.00 164.00

141

BLOW UP, MODEL 760 LOAD BEARING BOX

POS

PART NO

DESCRIPTION

LIST PRICE

1 2 3 4 5 6 7* 8 9 10 11 12 13 14 15

7276005 7309095 7039125 7093035 2550 2481 719193 2663 7269065 2339 N/A 490098 7280885 N/A N/A

Load Bearing Box Cover Splined Collar Dust Cover Seal (Top) Snap Ring Seal Bearing Ram Pinion Seal Bearing (Lower) Bearing Spacer Bearing Thrust Bearing Extraction Washer Load Bearing Box Mounting Bar Pinion Cover Galvanized Screw

1 1 1 2 1 2 1 1 1 1 1 1 2 1 4

121.00 29.00 9.00 13.00 6.00 107.00 139.00 67.00 4.00 85.00 N/A 465.00 37.00 N/A N/A

7099575

8.00

2070

Gasket (Drive Unit to Load Bearing Box) Stainless Steel Screw (6 x 10mm)

3.00

* 7192475

142

QTY

Pinion â&#x20AC;&#x2DC;05 New Style... 137.00

143

144

145

146

147

148

149

Limited Warranty To the original purchaser only: FAAC International, Inc., warrants for the time period indicated in each product’s description (or product title page) from the date of invoice, the gate operator systems and other related systems and equipment manufactured by FAAC S.p.A. and distributed by FAAC International, Inc., to be free from defects in material and workmanship under normal use and service for which it was intended provided it has been properly installed and operated. FAAC International, Inc.’s obligations under this warranty shall be limited to the repair or exchange of any part or parts manufactured by FAAC S.p.A. and distributed by FAAC International, Inc. Defective products must be returned to FAAC International, Inc., freight prepaid by purchaser, within the warranty period. Items returned will be repaired or replaced, at FAAC International, Inc.’s option, upon an examination of the product by FAAC International, Inc., which discloses, to the satisfaction of FAAC International, Inc., that the item is defective. FAAC International, Inc. will return the warranted item freight prepaid. The products manufactured by FAAC S.p.A. and distributed by FAAC International, Inc., are not warranted to meet the specific requirements, if any, of safety codes of any particular state, municipality, or other jurisdiction, and neither FAAC S.p.A. nor FAAC International, Inc., assumes any risk or liability whatsoever resulting from the use thereof, whether used singly or in combination with other machines or apparatus. Any products and parts not manufactured by FAAC S.p.A. and distributed by FAAC International, Inc., will carry only the warranty, if any, of the manufacturer. This warranty shall not apply to any products or parts thereof which have been repaired or altered, without FAAC International, Inc.’s written consent, outside of FAAC International, Inc.’s workshop or altered in any way so as, in the judgment of FAAC International, Inc. , to affect adversely the stability or reliability of the product(s) or has been subject of misuse, negligence, or accident, or has not been operated in accordance with FAAC International, Inc.’s or FAAC S.p.A.’s instructions or has been operated under conditions more severe than, or otherwise exceeding, those set forth in the specifications for such product(s). Neither FAAC S.p.A. nor FAAC International, Inc., shall be liable for any loss or damage whatsoever resulting, directly or indirectly, from the use or loss of use of the product(s). Without limiting the foregoing, this exclusion from liability embraces a purchaser’s expenses for downtime or for making up downtime, damages for which the purchaser may be liable to other persons, damage to property, and injury to or death of any persons. Neither FAAC S.p.A. nor FAAC International, Inc., assumes nor authorizes any person to assume for them any other liability in connection with the sale or use of the products of FAAC S.p.A. or FAAC International, Inc. The warranty hereinabove set forth shall not be deemed to cover maintenance parts, including, but not limited to hydraulic oil, filters, or the like. No agreement to replace or repair shall constitute an admission by FAAC S.p.A. or FAAC International, Inc., of any legal responsibility to effect such replacement to make such repair, or otherwise. This limited warranty extends only to wholesale customers who buy directly through FAAC International, Inc.’s normal distribution channels. FAAC International, Inc., does not warrant its products to end consumers. Consumers must inquire from their selling dealer as to the nature and extent of that dealer’s warranty, if any. This warranty is expressly in lieu of all other warranties expressed or implied including the warranties of merchantability and fitness for use. This warranty shall not apply to products or any part thereof which have been subject to accident, negligence, alteration, abuse, or misuse or if damage was due to improper installation or use of improper power source, or if damage was caused by fire, flood, lightning, electrical power surge, explosion, wind storm, hail, aircraft or vehicles, vandalism, riot or civil commotion, or acts of God. Terms of Sale Important Notice Prices shown in this list are based on the availability of items when the price list was printed. Prices are subject to change without notice. A minimum billing charge of $25.00 net plus shipping cost will be billed for all orders received. Whenever possible, we suggest that you combine orders for all parts to surpass the minimum cost. Product delivery time is subject to product availability. We are not responsible for any damages caused by a delay in shipping or product availability. Pricing All quoted prices for products are discounted according to the list price provided in our most current pricing manual. Discounts quoted do not apply to special order items. Contact the factory for Dealer/Distributor pricing on special orders. Credit Terms We are pleased to offer one of the most generous discount terms available in the industry. Our credit terms are net 30 days. Credit terms apply only to open accounts in good standing and only to merchandise. Balances remaining unpaid after the 30th day are subject to a 1.75% per month finance charge. This is an annual cost to you of 21%. We compute the finance charge by applying the 1.75% rate to the amount of the invoice past due for every month it is past due. The balance of your account is determined by taking the balance you owed at the end of the previous billing cycle and subtracting all payments and credits received during the current billing cycle. Accounts past due forty-five (45) days will be placed on credit hold until the account is brought up-to-date. Accounts over sixty (60) days past due that have no payment arrangements will be considered delinquent and subject to collection remedies. The dealer/distributor will be responsible for all collection expenses. A current signed credit application must be provided before an account is opened, subject to credit approval. Delivery All prices are quoted F.O.B. our factory. The purchaser is obligated to submit claims for damages or shortages of freight directly to the freight carrier within 30 days when due to carrier neglect. Material Returned for Credit or Repair Goods may be returned for credit or exchange under certain conditions. You must contact the factory for instructions and an authorization number. Merchandise returned for credit must be current models, unused, and uninstalled - in new condition. Freight must be prepaid on all authorized returns to FAAC International, Inc. The repair or replacement of product and parts is subject to availability, and repair time is not guaranteed. We may have loaner operators available, and they are subject to rental charges. All damages to loaner operators are the responsibility of the Dealer/Distributor. Repaired or replaced parts carry a 90-day warranty. A 15% restocking charge will be applied to goods returned for credit. Goods returned for repair will be handled immediately when the following conditions exist: 1. Name and address of sender are enclosed with material.

FAAC International, Inc.

2. The authorization number is clearly visible on the exterior of each package returned.

303 Lexington Avenue

3. A brief description of the problem and the requested repair is included with the shipment.

Cheyenne, WY 82007

We will not be responsible for poorly packaged equipment. Shipments of 70 lb or less should be shipped via United Parcel Service.

1-800-221-8278 Fax: (307) 632-8148 www.faacusa.com

Revised: 3-24-09

150

LIT-PROLINE-1/18/07

148