FRAMES
Choose from one of our many standard frames from our Tailor line or specify your own frame by-the-inch width. You may also choose from two standard depths or specify your own by-the-inch depth.
CHOOSE YOUR STANDARD DEPTH
Q 37"0D • 22"SD Q 40"0D • 25"SD / 24"SD Sleeper
CHOOSE YOUR TAILOR FRAME
STANDARD TWO ARM CHAIR and SOFA FRAMES •overallwidth dependson armwidths 7"or10"+lnside Width.
Overall widths are based on 3.5” arm (first) and 5” arm (second).
B37"D Q DCH/37 Chair'
40"D Q DCH/40 Chair'
OW: 30" or 33" IW: 23"
Q DL/37 Loveseat
Q DL/40 Loveseat
OW: 53" or 56" IW: 46"
'Swivel: DCH/37SW, DCH/40SW
'Swivel Glider: DCH/37SG, DCH/40SG
Q DS/37 Apartment
Q DS/40 Apartment
OW: 67" or 70" IW: 60"
STANDARD TWO ARM CHAISE FRAME
Q DSS/37 Standard
Q DSS/40 Standard
OW: 76" or 79" IW: 69"
Q DES/37 Extended
Q DES/40 Extended'
OW: 82" or 85" IW: 75"
Q DXS/37 Extra Long
Q DXS/40 Extra Long
OW: 99" or 102" IW: 92"
'Extended Sleeper: DES/40-S
STANDARD OT TOMAN FRAMES
• Overallwidth depends an armwidths: 7" or10" + Inside Width.
Overall widths are based on 3.5” arm (first) and 5” arm (second).
these pieces coordinate with 37" deep frames because of depth and arm length
OW: 30" or 33"
OD: 58"
SD: 43" IW: 23"
Q DSCH/61 Chaise
OW: 30" or 33"
OD: 61"
these pieces coordinate with 40" deepframes because of depth and arm length Q DSCH/58 Chaise
SD: 46" IW: 23"
DOT /20 Ottoman
20"
DCT /36 Cocktail Ottoman
36"
36"
17"
STANDARD ONE ARM CHAISE FRAMES • Overallwidth depends on armwidth 35" or 5" + Inside Width.
Overall widths are based on 3.5” arm (first) and 5” arm (second) + Inside Width.
[D [CJ ILL 111
26.5" or 28" arm length
these pieces coordinate Q DSLCH/61 Short Q DSRCH/61 Short Q DLLCH/78 Long Q DLRCH/78 Long with 40" deepframes Left Arm Chaise Right Arm Chaise Left Arm Chaise Right Arm Chaise because of depth and
FRAMES
Choose from one of our many standard frames or specify your own frame by-the-inch wi dth. You may also choose from two standard depths or specify your own by-the-inch depth.
STANDARD ONE ARM CHAIR and SOFA FRAMES ·overollwidth depe nds onormwidth 3S'or5"+/nside Width.
Overall widths are based on 3.5” arm (first) and 5” arm (second).