KIPCUT C7800 IN-LINE CUT & TRIM SYSTEM
KIPCut C7800 The KIPCut C7800 in-line wide format cut & trim system offers accuracy, speed and performance based on advanced finishing technology. Thanks to this complete solution, wide format graphics, posters & displays are printed and cut to bleed, eliminating the white edges around colorful images. The system reads embedded crop marks in the length and width of the print to perfectly align the cutting blades to deliver highly accurate parallel trimming to the nearest millimeter. The KIPCut C7800 is also equipped with vertical blades to enable several prints to be produced on a single sheet, maximizing media efficiency.
SYSTEM FEATURES • • • • • • • •
VERTICAL (X) AND LONGITUDINAL (Y) CUTTINGS CUT SPEED PERFECTLY ADAPTED THE PRINT SPEED AUTOMATIC CUTTING FROM 297 MM TO 914 MM CUT ACCURACY: +/- 1 MM SELF-SHARPENING BLADES 3 LATERAL BLADES OPTION TO ADD EXTRA BLADES PRESENCE OF OPTICAL SENSORS FOR CUTTING ALIGNMENT ON TRANSVERSAL AXIS (X) AND LONGITUDINAL AXIS (Y)
SPECIFICALLY DESIGNED FOR THE KIP C7800, THE IN-LINE KIPCUT SYSTEM PERFORMS QUICK & EASY HORIZONTAL AND VERTICAL CUTS.
DIRECT ACCESS TO THE SYSTEM FUNCTIONS FROM THE INTERACTIVE CONTROL PANEL TRANSPORT ROLLERS DRIVEN BY A STEPPER MOTOR PRESSURIZE THE MEDIA TO KEEP IT PERFECTLY STRAIGHT
DEDICATED TO GRAPHICS APPLICATIONS The KIPCut C7800 addresses many applications where the need for permanent & professional displays are necessary: colourful banners, bulletins, & signs posted in hallways or placed in windows attract attention while large, full colour business-style graphics deliver the right message at meetings, sales presentations, and public viewing areas. Example of poster printing Format 40 x 60 cm CUTTING MARKS OF LATERAL CUTTERS
BLEED
CUTTING
CUTTING
MARKS
MARKS
OF THE
OF THE
CENTER
TRANSVERSAL
LATERAL
CUTTER
CUTTER
DISPLAY GRAPHICS POINT OF PURCHASE BANNERS
PHOTOGRAPHY REMAINING WHITE MARGIN WIDTH 914 MM
PRODUCT FEATURES DEDICATED CUTTER DESIGNED FOR THE KIP C7800 X & Y CUTTER SELF SHARPENING BLADES
DIRECT ACCESS VIA CONTROL PANEL 3 LATERAL BLADES OPTICAL SENSORS FOR CUTTING ALIGNMENT
PRODUCT INFORMATION PRINT SYSTEMS
THE KIPCUT SYSTEM IS CONSIDERED TO BE “IN-LINE” WITH THE KIP C7800 PRINTER.
SYSTEM SOFTWARE
THE KIPCUT SYSTEM REQUIRES EITHER CALDERA GRAND RIP* OR EFI FIERY XF FOR KIP C7800 SOFTWARE FOR OPERATION
CUT MODES STANDARD Y KNIFES OPTIONAL Y KNIFES MEDIA THICKNESS
EIGHT (8) PROGRAMMABLE MODES 2 SINGLE (OUTSIDE) 1 DUAL WITH A STANDARD 8 MM GAP / 2 SINGLE KNIVES WITH A MINIMUM OF 9 MM GAP UP TO 0.5 MM
MEDIA TYPES
BONDS, PHOTO GLOSS PAPER, TECHNICAL AND GRAPHIC VELLUMS, FILMS, BILLBOARD BLUE BACK
MEDIA WIDTHS
MIN: 297 MM / MAX: 914 MM
MAXIMUM FEEDING LENGTH
6M
MINIMUM FEEDING LENGTH PRINT STACKING VOLUME PRINT STACKING PAGE SIZE CUT / FEEDING VARIANCE
665 MM UP TO 200 PAGES MIN: 80 CM / MAX: 150 CM +/- 1 MILLIMETER
* WITH NESTOBA OPTION
www.konicaminolta.eu
KIP 39575 W. 13 Mile Road Novi, MI. 48377 USA
Konica Minolta Business Solutions Europe GmbH Europaallee 17 路 30855 Langenhagen Germany
KIP is a registered trademark of the KIP Group. All other product names mentioned herein are trademarks of their respective companies. All product features and specifications are subject to change without notice. Complete product specifications are available upon request. 漏 2012
04/2013
www.kip.com