Travel Tote Chart & Material List Travel Tote 1
Let’s Begin
18" x 19" (approximate) material list
Batting
Backing/Lining (can use assorted fabrics) @ yards (read Let’s Begin for cutting sizes) Grommets Package of 8 (machine washable) Hook and Loop tape, buttons or snaps (optional)
@)" x !*" two @)" x !$" two @)" x &" two %" x ^!" one @w" x %)" one !" x &@" one
Fabric Name, Placement & Yardage
Fabric A SHAD-09 Ivory Tote Base
First Cuts
Next Cuts
!
!^2" x $@"
@
!^2" x !*2"
! @
!!2" x $@" %2" x $@"
@
!!2" x !*2"
! @ !
!@2" x $@" $2" x $@" !" x $@"
@
!@2" x !*2"
@
!" x !*2"
s yard Fabric B JETS -01 Blue Large Pocket & Trim
w yard Fabric C MOVE-01 Yellow Pocket, Handle & Trim
w yard Fabric D JETS -01 Navy Trim & Tote Sides
w yard
84 fabric vine 2014
1! @
!#" x $@" #2" x $@"
@
!#" x !*2"
Before you begin, read all instructions and use an accurate 4”-wide seam allowance throughout this project. Referring to project Cutting Chart, cut First Cuts strips as indicated in chart then cut smaller pieces listed under Next Cuts from these strips. Outside tote pockets can be custom to your personal needs adjusting pocket division for personal items for example, cell phone, tablets, books, suntan lotion etc. Note: If leaving a pocket as a single pocket (no pocket divisions) it is recommended to add a closure like hoop and loop tape, snaps, tabs or buttons. Backing/Lining fabric will show on the inside of tote use one fabric or assorted fabrics and cut the following pieces: for base fabric lining cut two !*” x @)” pieces, for side fabric lining cut one %” x ^!” piece (sew strips together to obtain this measurement). Batting pieces are cut larger than fabric pieces and trimmed after quilting. If desired batting can be trimmed to fabric size prior to quilting.
Making the Tote
1. Fold one !@2” x !*2” Fabric C piece in half lengthwise wrong sides together and press. Make two ^4” x !*2” Fabric C folded pieces.