Standalone MMC Hardware Manual - STANDALONE MMC CONTROL
Figure 4-2: Block I/O Breakout Box Dimensions 1.750”
3.000” 1
5
9
6 2.250”
4.5.3
1.750”
User Port The 15-pin HD male D-sub User Port connector (labeled “USER PORT” on the front of the Control) provides RS232 and RS485 serial communication between a serial device and the Control
48
•
Pin descriptions are provided in Table 4-13
•
Pin assignments are provided in Table 4-14
•
The available Flying Lead cable is described in Table 4-15.
•
The available RS-232 Exter HMI cable is described in Table 4-16.
•
The available RS-485 Exter HMI cable is described in Table 4-17.
•
Available Breakout Boxes and Cables are described in Table 4-18.
•
Breakout Box dimensions are shown in Figure 4-3
Kollmorgen - April 2010