POWER HEAD TOOLS Part Number
YM-A8998
Description / Use
YB-06791
Application: V8 5.3L OFFSHORE MODEL 2007 THROUGH 2016
LOWER UNIT TOOLS Part Number YB-06052
Application: 5.3L F300 & F350
Application: V8 5.3L OFFSHORE MODEL 2007 THROUGH 2016 YB-35956-B
Lower Unit Pressure / Vaccum Tester The hand pump device provides both pressure and vacuum for leak testing of the lower unit.
Application: All MODELS YB-69001
Application: ALL MODELS
1-800-708-3184 | kLsupply.com
8 CYLINDER 4-STROKE
Oil Drain Installer/ Remover Screw Tool This tool was designed to remove and install the oil drain screw from the lower unit of Yamaha 2 & 4 stroke outboard motors without damage to the screw or surrounding areas.
4&6 CYLINDER 4-STROKE
Application: V8 5.3L OFFSHORE MODEL 2007 THROUGH 2016
4&6 CYLINDER 2-STROKE
Oil Filler Cap Installer/ Remover Tool This tool was designed to easily remove and install the oil filler cap on Yamaha 4 stroke outboard motors without damage to the cap.
Shift Rod Scoket It shifts the lower unit into forward, neutral or reverse when the lower unit has been removed from the engine.
3 CYLINDER 4-STROKE
Oil Filter Catch Pan This tool is used to catch oil when replacing the oil filter. Application: 5.3L F300 & F35
YB-69000
Shift Rod Push Arm It shifts the lower unit into forward, neutral or reverse when the lower unit has been removed from the engine. Application: 5.3L F300 & F350
YB-06681 YB-06845
Description / Use
3 CYLINDER 2-STROKE
Pulser Coil Test Harness 3 Pins It is used with a DVA meter and the Peak Voltage Adapter YU-39991 to measure voltage output.
Driver Handle Large This heavy-duty handle is used with the appropriate adapters to remove and install seals and bearings.
1&2 CYLINDER 4-STROKE
Application: V8 5.3L OFFSHORE MODEL 2007 THROUGH 2016
YB-06071
Description / Use
1&2 CYLINDER 2-STROKE
Valve Lapping Tool The Valve Lapping Tool is the ultimate vacuum stick for insuring perfect surfaces on valves and valve seats. Interchangeable cups make the unit suitable for use with virtually any size valve. The set includes vacuum stick and 3/4” and 1/4” diameter rubber cups.
Part Number
GENERAL SHOP TOOLS & EQUIPMENT
POWER HEAD TOOLS
8 CYLINDER 4-STROKE 76