LOWER UNIT TOOLS Part Number
YB-06269
Description / Use
YB-06153
YB-06155
Application: 50 1995
Driveshaft Needle Bearing Installer and Remover It removes and installs the driveshaft needle bearing. Use it with YB-34474. Application: 70, 75, 80, 85, 90
YB-06063
YB-06156
Application: 70, 75, 80, 85, 90 YB-06151
Application: 70, 75, 80, 85, 90 YB-34473
Application: 75, 80, 85, 90 Bearing Housing Needle Bearing Installer Bearing Housing Needle Bearing Installer.
Application: 70, 90, C55
PTT/MIDSECTION TOOLS Part Number
YB-34466
Application: 70, 75, 80, 85, 90 Needle Bearing Installer Installs the forward gear bearing cup. Use with Driver Handle YB-06071. Application: 70, 90
Power Tilt Cylinder Cap Wrench It loosens and tightens the power tilt cylinder cap. Application: C40, 50
YB-06175-2B
Application: 40-90
1-800-708-3184 | kLsupply.com
8 CYLINDER 4-STROKE
Power Tilt Cylinder Cap Wrench It loosens and tightens the power tilt cylinder cap.
4&6 CYLINDER 4-STROKE
YB-06276-B
Description / Use
4&6 CYLINDER 2-STROKE
YB-06152
Driveshaft Needle Bearing Depth Stop It insures the driveshaft needle bearing is installed to its proper depth. Use it with Driver Handle YB-06063.
3 CYLINDER 4-STROKE
Driveshaft Holder-Pinion Nut Torque Tool It is used to loosen or torque the pinion nut. It installs onto the driveshaft.
Driveshaft Taper Roller Bearing Cup Installer It installs the bearing cup for the driveshaft taper roller bearing. Use it with Driver Handle YB-06071.
3 CYLINDER 2-STROKE
Driveshaft Needle Bearing Remover and Installer It removes and installs the driveshaft needle bearing. Use it with YB-34473.
1&2 CYLINDER 4-STROKE
Bearing Installer It is used to install forward gear bearing outer cup. Use it with Driver Handle YB-06071.
Bearing Housing Needle Bearing Remover It is required to remove the needle bearing from the reverse gear housing. Application: 70, 75, 80, 85, 90
Application: 40~90 YB-41446
Description / Use
1&2 CYLINDER 2-STROKE
Water Pump Housing Bearing and Seal Installer It properly installs the water pump seal on 70 and 90 models. It installs the rear bearing housing seal on 40, 50, 70, and 90 models.
Part Number
GENERAL SHOP TOOLS & EQUIPMENT
LOWER UNIT TOOLS
3 CYLINDER 2-STROKE 38