GENERAL SHOP TOOLS Part Number
YB-35956-B
YB-06117
YB-06096
Description / Use Slide Hammer Contains most necessary attachments to remove seals, bearings and bearing cups. Application: All
Universal Puller Heavy duty puller for removing flywheels, balancers and propeller shaft bearing housings.
YB-06523
3 CYLINDER 2-STROKE
Bearing Splitter Plates Using these special splitter plates can solve many difficult bearing pulling problems, especially where access to the inner race is limited. “Knife-like” edges may be forced behind the bearing for a firm grip.
Bearing Splitter Plates Using these special splitter plates can solve many difficult bearing pulling problems, especially where access to the inner race is limited. “Knife-like” edges may be forced behind the bearing for a firm grip.
YB-06334
8 CYLINDER 4-STROKE
11 GENERAL SHOP TOOLS & EQUIPMENT 800.727.6767
Piston Ring Compressor Allows you to compress the rings while installing piston. 54 - 127mm diameter.
Bearing Puller Legs Has a wide grip area. Use with Slide Hammer YB-06096. Application: All Engines
YE-62001-C
Bridge Two Gas Analyzer Used to check emissions output from the engine. Application: 4 -Strokes
Application: Small Up to 2-1/4”
YM-08037
Universal Magneto & Rotor Holder Used to loosen and tighten flywheel nuts. Application: All
Application: Large Up to 4-1/4”
YU-35557
Bearing Puller Legs Used with Slide Hammer YB-06096 to be used for removing bearing cups and seals. Application: All
YU-01235
4&6 CYLINDER 2-STROKE
3 CYLINDER 4-STROKE
Lower Unit Pressure/ VacuumTester The hand pump device provides both pressure and vacuum for leak testing of the lower unit.
Part Number
Application: All
YU-22912-1
4&6 CYLINDER 4-STROKE
Description / Use
Application: All
1&2 CYLINDER 4-STROKE
1&2 CYLINDER 2-STROKE
GENERAL SHOP TOOLS & EQUIPMENT
GENERAL SHOP TOOLS
YE-62001-D
Bridge Four Gas Analyzer Used to check emissions output from the engine. Application: 4 -Strokes
Application: All
1-800-708-3184 | kLsupply.com