SHOP EQUIPMENT TOOLS
VALVE GUIDE REPAIR EQUIPMENT KWIK-LOADER VALVE KEEPER TOOL SET
HARD PARTS
The Kwik-Loader cuts valve insatallation and removal time drastically. It’s compact and easy to use design replaces bulky C-clamp style compressors. The white tool is used for keeper removal, simply slide it over the spring pack/retainer and use a mallet to apply downward pressure to the collar. Remove the tool and keepers are ready to take out. To re-assemble, put valve into the guide, install the springs, and place retainer and keepers in position. Using the black tool, hand pressure is sufficient to complete the installation process. It’s easier and faster than automotive style compressors, and you can even change valve stem seals without removing cylinder heads. Simply apply air pressure to the assembled head via the spark plug hole, and follow the same procedure above. Save time and make more money, contact your representative for details. 35-3568 Kwik Loader Keeper Installation/Removal Tool
Visit for Demos!
IGNITION/ELECTRICAL
CARB & FUEL
kwikloader.klsupply.com
VALVE GUIDE DRIVERS
Use for removal and installation of valve guides into cylinder head. 35-8388 4.0mm YM-04111 35-8418 4.5mm YM-04116 35-8416 6.0mm YM-04064-A 35-8417 5.0mm YM-04097 35-8414 7.0mm YM-01225-A 35-8408 5.5mm YM-01122 35-8413 8.0mm YM-01200
35-8435
YAMAHA VALVE GUIDE INSTALLERS CONTROL
Available in the following I.D. sizes: 35-9246 6.0mm 35-9243 4.0mm 35-9245 5.0mm 35-9247 7.0mm 35-9244 5.5mm 35-9248 8.0mm
VALVE LAPPING TOOL 35-8423
These installers are used for installation of Yamaha shoulderless valve guides to a specific depth into the cylinder head. To use, position onto the valve guide and drive into the cylinder head until installer makes contact with cylinder head surface. Note: Must use with Valve Guide Driver. Available in the following sizes: 35-8439 4.5mm YM-04117 35-8419 5.5mm YM-04015 35-8423 7.0mm YM-04017
SUSPENSION
35-8387 4.0mm YM-04112 35-8437 5.0mm YM-04098 35-8435 6.0mm YM-04065-A
The ultimate vacuum stick for perfect surfaces on valves and valve seats. Interchangeable cups make unit suitable for use with virtually any size valve. Set includes vacuum stick, 3/4” and 1/4” rubber cups. 35-8998 Valve Lapping Tool
VALVE LAPPING TOOL SET
Features beaded wooden dowel for non-slip use and oil resistant rubber vacuum cups.
35-5920 Valve Lapping Tool Set
RACING VALVE STEM SEAL INSTALLERS
VALVE GUIDE REAMERS ACCESSORIES
VALVE GUIDE FLEX-HONES (320 GRIT)
Reaming valve guides after installation assures a proper valve stem to valve guide fit. Available in the following sizes: 35-3854 4.0mm YM-04113 35-3847 6.0mm YM-04066 35-3829 4.5mm YM-04118 35-3851 7.0mm YM-01227 35-3835 5.0mm YM-04099 35-3852 8.0mm YM-01211 35-3836 5.5mm YM-01196
98 SHOP EQUIPMENT | TOOLS 800.727.6767
Designed for the installation of Valve Stem Seals on modern Shim Under Bucket 4-stroke street, ATV and Dirtbike heads. These tools can hold up to 4 Valve Stem Seals andload them onto the valve guides in under 15 seconds. Sold each. 35-2771 Valve Stem Seal Installers (4.0) 35-2773 Valve Stem Seal Installer (4.5) 35-2776 Valve Stem Seal Installer (5.0) 35-2778 Valve Stem Seal Installer (5.0 Hyabusa)
1-800-727-6767 | kLsupply.com