Customized Titanium Membrane Go to Index
CTi-mem Selection 1. Depends on the wall situation, choose A, B, C type from the CTi-men. 2. Proximal width (p) of Occlusal part that needs to be covered by Membrane is measured in oral with determination of the 'p' size. If Proximal defect is not existed, amputate the proximal when it's 1wall choose A, and when it's b-l defect choose C for the amputation. 3. W (Buccal Width) can be decided by P (Proximal Width) and P can be measured From B and C.
Customized Titanium Membrane 163
CTI mem 06
New CTi-mem New CTi-mem provides fixing holes to give smoother access for fixing screws! ;XIKMZ
)LLQ\QWVIT .QVOMZ
After connecting to the fixture, mount CTi-mem on spacer and have statined using Cover Screw 8ZW`QUIT .QVOMZ
.Q`QVO 0WTM
<MV\ ;KZM_ 4I\MZIT <PQKSVM[[ .WZUQVO 8IZ\
Mount CTi-mem on a statined Tent Screw and fasten using Cover Screw
*MVLQVO 8WZ\QWV 8ZW`QUIT .QVOMZ
4I\MZIT +W^MZ
.Q`QVO ;KZM_
After bending or customizing, the CTi-mem, tighten the fixing screw into the foot fixing hoel
.Q`QVO 0WTM
• New CTi-mem Spec [NA3] ATMBN0915SF
[NB9] PTMBN1215LF
[NC9] PTMLN1215LF
[NE1] CTM1215F
12mm
4mm
12mm
15mm
11mm
10mm
10mm
10mm
12mm
12mm
12mm
[NE2] CTM1220F
[NE3] CTM1520F
[NE4] CTM2023F
[NE5] CTM25F
20mm
12mm
15mm
20mm
20mm
20mm
23mm
30mm
New CTi-mem applicationguide
Fix the Tent Screw at a defect area
Choose the New CTi-mem(NE5)
Tighten the Fixing Screw into each side-foot Fixing hole
Make hole Tent Screw
Tighten the Fixing Screw into the rest of Fixing holes
Bone graft
Tighten the New CTi-mem with Tent Screw by using Cover Screw
Complete the New CTi-mem with bone grafting by using Tent Screw and Fixing screw
CTI mem 07
Ti-mesh(Neo Titanium Mesh) New Ti-mesh can be trimmed which ever form. Thickness 0.085mm / Hole size 0.8
• Type Of Ti-mesh
20mm 15mm
12mm
25mm
25mm
25mm
35mm
35mm
Size
Code
Code
20 x 12
T1
TMN 122008
25 x 20
T2
TMN 202508
35 x 25
T3
TMN 253508
50 x 35
T4
TMN 355008