7. Impact Sockets 1/2” DR EXTENSIONS Standards: Size Weight (mm) (grams)
Code 11328-11330
11328 11329 11330
75 125 250
141 230 420
11328-11330
DIN 3121 3129 Diameter Torque (mm) (Nm / kg-cm) 24 25 25
512 / 5224 512 / 5224 512 / 5224
1/2” DR ROTARY EXTENSIONS 11367
11675
Standards: Size (mm)
Code
Weight (grams)
11367-11675
DIN 3121 3129 Torque Steel Hardness (Nm) (HRC)
11367 200 420 512 41 - 45 11675 250 1260 1412 41 - 45 High grade SCM440 chrome molybdenum. Phosphated finish. Includes rotary holder for ease of use.
1/2” DR PINS & “O” RINGS
11335-11336
Code
11335-11336
Description
11335 8mm to 14mm “O” Ring and Pin Set 11336 15mm to 32mm “O” Ring and Pin Set Pins and O Rings are used to retain extensions to impact wrench and sockets to extension on 1/2” Drive.
1/2” DR TORSION BAR SET 7PC Code 113301 113302 113303
113300
122. Impact Sockets
55 65 80
Code 113304 113305 -
Size (ft lbs) 100 120 -
1/2” DR TORSION BARS Code
113301-113307
Size (ft lbs)
Description
113300
Code 113306 113307 -
Size (ft lbs) 140 175 -
113301-113307
Length (mm)
113301 55Ft lbs Torsion Bar (Red) 180 113302 65Ft lbs Torsion Bar (Yellow) 180 113303 80Ft lbs Torsion Bar (Green) 180 113304 100Ft lbs Torsion Bar (Blue) 180 113305 120Ft lbs Torsion Bar (White) 180 113306 140Ft lbs Torsion Bar (Black) 180 113307 175Ft lbs Torsion Bar (Orange) 180 Torsion bars are designed for use with standard and thin wall sockets. Eliminates damaging wheels when you torque wheel nuts with tight tolerances. Prevents over-torquing wheel nuts, brake pulsation, distortion of wheels. Easy and cost efficient to use. Flexes at torque pressure. The shaft will flex in sync with the impact blows from the wrench used for the job once the correct torque has been reached. Accuracy within 3%, Adjust speed adjustment setting of the torque on the impact wrench to work within the desired range listed.