The iBox universal 速
Planning and installation 1
The iBox universal One for all ®
Introduction iBox® universal The revolution in concealed installation continues The basis for all standard and thermostat solutions Proved a million times and improved three times over
4 6 8
Raindance® Rainfall®
10
Raindance® Shower panel®
12
imodul®
14
Installing the iBox universal Installing the standard finish set Piping and compatibility Installation methods Installation options Installation tips, planning guidelines, instructions Dimensioned drawings and technical information
16 17 18 19 20 25 26
Product overview Hansgrohe® faucet lines
28
Product overview Axor® Collections
30
The iBox universal The revolution in concealed installation continues ®
In a small bathroom your are limited in space and loose out on the showering pleasure. A concealed installation will provide you with more space, because flush mounting means a less intrusive finish, leaving more room to move around. With the iBox universal, Hansgrohe offers a flexible concealed installation system which allows a basic unit built into the wall to be connected to various different faucet finish sets. Introduced in 2001, the iBox universal is still the first and only basic set for all standard and thermostat solutions. It can be connected up for several different attachments, and is also amazingly flexible–no wonder it has set the standard and taken the market by storm over the last six years! In order to keep it in the lead position in future, Hansgrohe has worked closely with experienced installers to refine and improve the iBox universal, adapting it to changing needs. The following pages present details of the changes and show which aspects of this tried and tested technology have remained the same. One thing never changes, however: the part number stays the same.
Exposed installation
4
Concealed installation
5
The iBox universal The basis for all manual and thermostatic solutions ®
One iBox universal for everything. That means: –One basic set for nine different functional solutions –One basic set for all Axor and Hansgrohe faucet lines –You only need to keep one concealed installation basic set in stock –One basic set that fits all installation systems, connection types and fittings –Homeowners have more time to choose faucets, because they do not have to choose a particular faucet range before the basic set is installed.
1. Raindance® Rainfall® Horizontal overhead shower panel with three different spray modes: 240 mm overhead shower, wide flood jet and swivel massage jets. Mounting requires two iBox universal basic sets.
6. Raindance® shower panel® With MTC cartridge and integrated shut-off and diverter valve, free through-flow at 3 bar: Shower outflow 17 l/ minute, side shower outflow 19 l/minute. For installation in the shower or over the bathtub (end wall), to serve the hand shower and eight side showers. The two functions can be used either separately or in parallel. Can be mounted only if connected to an iBox universal.
2. Ecostat® S concealed installation thermostat With MTC cartridge, free through-flow at 3 bar: 43 l/minute. Also available as a Highflow model, free through-flow at 3 bar: 58 l/minute. For installation in showers or over bathtubs. Requires at least one additional shut-off valve.
7. imodul® For installation in the shower, shut-off valve and Quattro diverter valve pre-assembled, with connections for six side showers, one overhead shower and one hand shower.
3. Ecostat® S concealed installation thermostat With integrated shut-off valve, with MTC cartridge, free through-flow at 3 bar: 26 l/minute. For installation in showers or over bathtubs, to serve one attachment, e.g. an overhead shower.
8. Single lever concealed installation bath mixer With M2-ceramic cartridge, free through-flow at 3 bar: Bathtub outflow 31 l/minute, shower outflow 24 l/minute. For installation in showers, but usually over a bathtub, to serve two functions, usually hand shower and spout. Also available with integrated safety combination as per DIN EN 817, which means it is not necessary to have an additional external pipe interrupter.
4. Ecostat® S concealed installation thermostat With integrated shut-off and diverter valve, with MTC cartridge, free through-flow at 3 bar: 26 l/minute. For installation in showers or over bathtubs, to serve two different attachments, e.g. a hand shower and an overhead shower.
9. Single lever concealed installation shower mixer With M2-ceramic cartridge, free through-flow at 3 bar: 32 l/minute. For installation over bathtubs, but mainly in showers, to serve one attachment, usually the hand shower.
5. Ecostat® S thermostat concealed installation With electronic Start/Stop button, with MTC cartridge, electronic time control, free through-flow at 3 bar: 26 l/minute. For installation in the shower, to serve one attachment, usually a hand or overhead shower.
6
1.
2. 9.
3.
8.
4.
7.
5.
6.
7
The iBox universal Proved a million times and improved three times over ®
Can technology as trusted and reliable as the iBox universal really be improved? Hansgrohe, the leading innovator in concealed installation technology, answers with a three-fold „Yes“ and, with the modified iBox universal, presents three new technical developments.
170
150
NEW Smaller collar diameter The new, minimalist faucet design requires not only filigree operating handles but also a smaller collar. Therefore, when changing to the new faucet lines, Hansgrohe reduced the collar diameter of the concealed installation mixer by 20 mm, yet still keeping it fully compatible with the iBox universal. The diverters in the bath mixer were also reduced in size. The result: a consistent look and harmonious proportions.
Depth 72 mm
8
Depth 64 mm
Depth 56 mm
Without ring, designed fordry wall installation
Single installation ring
min. 80
NEW
NEW
Flexible adjustment ring The new iBox universal has a patented flexible adjustment ring that can be precisely adapted by bayonet fitting to fit three different depths. This makes it much more versatile, as you now have the freedom to mount it on walls of varying thickness. It also means that the iBox universal can be used for dry wall installations. For pre-fabricated housing, it can easily be pushed through the wall from the rear and then fixed in place.
Reduced installation depth When the walls are thin, every millimetre counts. With a body that is now 2 mm flatter – 80 mm instead of 82 mm – the iBox universal has become even more suitable for walls with limited installation depth.
Revolutionary technology, that has everyone excited
Built in rotational symmetry The iBox universal‘s symmetrical structure makes all connections equal. The important thing is to make sure that the cold water is connected on the right and the hot water opposite it. When the iBox universal is used as a shower mixer, either the upper or lower outflow can be connected.
Safe and economical The universal basic set contains just the connection block. The valuable function block is supplied later, together with the finish set, when it is installed. This makes expensive warehousing unnecessary and prevents problems like theft, dirt or frost occurring during the building phase.
Multiple installation options Coordinated with all current installation systems and all types of connections and fittings, the iBox universal offers truly universal installation possibilities, with its flexible adjustment ring and the ability to be fixed at two levels and DN20 connections.
Everything included Concealed single lever bath mixer with integrated safety combination for spout, with overflow and waste system (Exafill). Hansgrohe’s universal integrated safety combination means it is not necessary to use an external pipe interrupter, which reduces installation costs and maintenance expenses.
Sealed all round Rubber seals on all four connections and the supporting collar which seals against splashing water protect the wall perfectly from moisture from any direction.
Soundproof The brass body of the iBox universal rests on seals, so that the sound of water-conducting parts cannot be transferred through the wall. Screwing the supporting collar to the iBox universal housing– and not to the function block– prevents sound being transferred through to the ceramic tiles.
105
Basic unit extension Even if the iBox universal has been fitted too deep into the wall, Hansgrohe has a solution at the ready. The basic unit extension is fitted between the connector and the function block. The extension set ensures safety right up to the wall, keeping the walls free from dampness, even in this tricky situation.
25 Reduction kit Thanks to the reduction kit, even limited installation depths are not a problem. The reduction kit is fitted between the tiles and the finish set, making it possible to fit the iBox universal in despite the lack of depth.
min. 58
Simplified rinsing The flushing block supplied with the iBox universal, which can be mounted in different positions, makes it easy to flush pipes through to where they finish at the wall, as recommended by DIN 1988. 80 22
9
Raindance Rainfall Extraordinary Shower Fun, simple installation ®
®
Experience water in all its original magnificence. Rainfall is a horizontal overhead shower panel with three attachments, each of which can be individually controlled from the wall: Overhead shower, massage shower and flood jet. The iBox universal forms the basis of this easy-to-install system and is used twice – for both the thermostat and the overhead shower panel. Together with the Quattro diverter valve and a shut-off valve, this shower installation guarantees perfect spray performance.
+
+
4.
1. iBox® universal (# 01800180) To connect to the hot and cold water pipes and to accommodate the central thermostat element and/or finish set
3.
2. Shut-off valve (# 15973180) To control the amount of water manually
2. 1.
3. Quattro diverter valve (# 15930180) To control the three different spray modes manually 4. iBox® universal (# 01800180) To mount the Raindance Rainfall securely and accommodate the various different pipes required for the spray modes and the appropriate functional unit. The fourth outflow on the iBox universal is lengthened a little to enable secure mounting, and is simply plugged up, as this part of the pipe is not water-conducting.
10
11 5
Raindance Shower panel Ultra flat, ultra easy to install ®
®
The iBox universal makes it possible. As well as being the first-ever concealed installation shower panel, Raindance is also the world‘s flattest shower panel, with only 33 mm between it and the wall. You can imagine how easy it is to install: just set the iBox universal in place, mount the shower panel on top, and voilà–all done! Super easy to install, and super multi-mode Shower Fun. Thanks to the extra-large hand shower, the eight effective side showers and the diverse spray modes, anything is possible, from the a luxurious rain shower to a powerful whole body massage.
+
12
13
imodul The quick way to the shower family ÂŽ
Ready cased, the imodul with the iBox universal is the ideal concealed installation base for all system elements in the Raindance shower families. Unlike preassembled shower cabins, a shower family like this can be set up and completed on location, just as the client wishes, according to technical requirements and how it looks once it is in place. After ďŹ xing the imodul in place, the only task remaining before tiling is to connect the cold and hot water. At the end, the thermostat finish set and selected shower family are installed and everything is ready to use, promising the ultimate in individualised showering pleasure. It could not be easier–or quicker!
14
Installation on the wall
Installation directly into Wall
Mounting on a carrier system, e.g. GIS by Geberit
Installation in an individual wooden frame
15
Installing the iBox universal ®
16
Everything included iBox universal, supporting collar, 3 reducing adapters, flushing block, construction protection cap, 1 plug for skeleton installation Exafill bath spout (with drain and overflow system), assembly instructions. No need to order additional accessories!
Installation tip To drill connections in, clamp the iBox universal in the vice using a pipe insert with a ¾" thread.
In the correct position With the help of the affixed positioning aids, it is easy to mount the iBox universal in exactly the right position.
Properly connected Coordinated with all current pipework systems, the fittings can be grouted to the iBox universal immediately.
Coordinates with all installation systems The two fixing levels and the wide range of ways it can be fixed in place make the iBox universal compatible with all current installation systems.
Rinsing meets DIN 1988 standard The flushing block, which is included in the delivery, makes it possible to flush the pipes in any targeted direction.
Exafill plug for outflow This plug makes it possible to turn off the water to the inlet pipe after checking the pipe system and filling the bathtub, yet maintain the pressure in the pipe system.
127 mm circle cutter The deliberately chosen round shape of the iBox universal makes it possible for a circle cutter to be used. This enables recesses to be created quickly and precisely in the cladding of the installation mounted on the wall or in the tiles.
Supporting collar for installation mounted on the wall To ensure that an installation mounted on the wall is totally watertight, press the supporting collar into PCI Lastogum, or a sealing compound which is similar according to the manufacturer‘s details, spread onto the wall.
Installing the standard finish set
iBox® universal Everything‘s ready–bathing fun coming up soon: function block, mounting screws, supporting collar, handle cartridge, grip adapter, handles and assembly instructions.
28 mm ceramic tile adjustment After the tiles are in place, cut away the protruding edge of the iBox universal 2 mm in front of the tiles using a knife. This ensures absolute tightness of the seal between the iBox universal and where the wall was penetrated.
Spray join with silicon To ensure that the seal is also tight against splashed water, spray the join between the iBox universal and the tiles with silicon.
Disassemble rinse block Before installing the function block, disassemble the rinse block by undoing the Allen screw. Remember to shut off the water!
Installation function block Using the mounting screws provided, screw the function block to the connecting block.
Screw supporting collar together Use plastic screws to screw the supporting collar to the housing of the iBox universal. This ensures that the soundproofing carries all the way through to the ceramic tiles. The sponge rubber seal keeps splashes of water from being absorbed, including into the grooves and gaps.
Easy to fit face plate Simply fit the face plate over the supporting collar–no screws or bolts needed. The sponge rubber, which protects against splashed water, and the O-rings at the openings for the handle cartridges guarantee a firm hold.
Securing the handles Finally, put the handles in place and screw them in.
Completion The iBox universal and the desired finish set can be installed in the shortest possible time and without the hassle of having to order accessories such as flushing plugs or items to help you secure things in place, depending on which installation method you use.
17
Piping and compatibility The iBox universal is compatible with all current pipework systems. Here, the installation of a bathtub provides an opportunity to show pipework systems from different manufacturers. (These items are not available from Hansgrohe).
18
Bathtub installation with Geberit Mepla Supplies Hot and Cold potable water: 2 pces Junction bracket with AG No. 602.253.00.1 20x R¾" Bathtub outflow / Shower outflow: 2 pces Junction with AG No. 602.536.00.1 20xR ¾" 1 pce Faucet connection for spout No. 602.294.00.1 20xR ¾" 1 pce Faucet connection for shower connection No. 602.293.00.1 20 x R½"
Bathtub installation with Mapress stainless steel Supplies Hot and Cold potable water: 2 pces Junction bracket with male thread 18-R½" Item No. 33834 Bathtub outflow: 1 pce Junction with male thread 22-R ¾" Item No. 31701 1 pce 90° bend DN 20 Item No. 30104 1 pce 45° bend with single-sided insert end DN 20 Item No. 30704 1 pce Ceiling bracket with female thread 22-Rp ¾" Item No. 30407 Shower outflow: 1 pce Junction with male thread 18-R½" Item No. 31704 1 pce Ceiling bracket with female thread 18-Rp½" Item No. 30405
Bathtub installation with GF Instaflex Supplies Hot and Cold potable water: 2 pces Junction bracket 90° with male thread 16 ¾" Item No. 760 854 839 Bathtub outflow: 1 pce Junction with male thread 20 ¾" Item No. 760 853 138 1 pce Faucet connection with female thread 20 ¾" Item No. 760 853 038 Shower outflow: 1 pce Junction with male thread 16 ¾" Item No. 760 853 108 1 pce faucet connection with female thread 16 ½" Item No. 760 853 013
Bathtub installation with Viega Profipress Supplies Hot and Cold potable water: 2 pces 90° Bracket with male thread 15 x ½" model 2214.1 Item No. 335 281 Bathtub outflow: 1 pce Junction with male thread 18 ¾" Model 2211 Item No. 283 230 1 pce Wall disc 18 ¾" Model 2225.5 Item No. 335 236 Shower outflow: 1 pce Junction with male thread 15 x ¾" Model 2211 Item No. 287 764 1 pce Wall disc 15 ½" Model 2225.5 Item No. 107 345
Bathtub installation with Geberit GIS iBox® universal Set Supplies Hot and Cold potable water: 2 pces MeplaFix Bracket (PVDF) DN15 Item No. 632.272.00.5, or 2 pces MeplaFix Bracket (PVDF) reduced DN15/12 Item No. 31.272.00.5 Bathtub outflow: 1 pce MeplaFix Coupling (PVDF) DN15 Item No. 632.562.00.5
1 pce Mepla Faucet connection (Red brass) DN15 x R¾" Item No. 602.294.00.5 Shower outflow: 1 pce MeplaFix Coupling (PVDF) DN15 Item No. 632.562.00.5 1 pce Mepla Faucet connection (Red brass) DN15x R½" Item No. 602.293.00.5
The GIS iBox universal set is optimally adjusted to make installation of the iBox universal efficient and trouble-free. The GIS iBox universal set is a pre-assembled unit and comprises: – Mounting plates with pre-assembled attachment levers for fast mounting onto GIS profiles by the circular screen principle, rotating 90 degrees at a time – Pre-assembled iBox universal – 2 reducers to ½" male screw thread to connect the Mepla piping, using MeplaFix, e.g. for hand shower and bathtub supply – 1 loose enclosed plug, in case only one attachment is to be connected
Installation methods
Installation on the wall
Installation in front of the wall. Shown here with M 10 stock screws as variable spacers.
Mounting on a carrier system
Installation on prefabricated house mounting plates or ďŹ nished cells
Installation directly into the wall
Installation with mounting rail set
19
Installation options Bath mixer with integrated safety combination
Function guaranteed from •
Thermostat with shut-off and diverter valve / Bath mixer
Function guaranteed from •
Wanneneinlauf
Function guaranteed from •
20
Thermostat with shut-off valve / Shower mixer
DN 20 (3/4")
Function guaranteed from • DN 15 (1/2")
TWW Hot DN 15 (1/2")
TW Cold DN 15 (1/2")
Function guaranteed from •
Thermostat with shut-off valve/shower mixer/Raindance® shower panel®
DN 20 (3/4")
DN 15 (1/2")
TWW Hot DN 15 (1/2")
1
2 TW Cold DN 15 (1/2")
21
Installation options Shower thermostat with electronic Start/Stop button / Thermostat with shut-off valve / Shower mixer
Function guaranteed from •
DN 20 (3/4")
Function guaranteed from •
Thermostat with shut-off and diverter valve / Bath mixer
1 2 DN 15 (1/2")
Function guaranteed from •
DN 15 (1/2")
TWW Hot DN 20 (3/4")
TW Cold DN 20 (3/4")
Function guaranteed from •
22
Thermostat
2 1
Function guaranteed from • 3
DN 20 (3/4") >50 l/min.
Rain Drain
Ø 70
Highflow thermostat
1 2
Function guaranteed from •
23
Installation options Highflow thermostat combined with Raindance ® Rainfall ®
bar
DN20 (¾")
Quattro
Function guaranteed from •
Concealed valve
1 Rain /Whirl 2 Flow >50 l/min.
Rain Drain
Ø 70
Highflow thermostat combined with Raindance ® Rainmaker
Quattro
Function guaranteed from • 1 Rain AIR 2 Rain AIR XXL
Concealed valve
3 Whirl AIR Trio Stop
1 + 3 Rain AIR + Whirl AIR 2 + 3 Rain AIR XXL + Whirl AIR
>50 l/min.
4 Hand shower 5 Side showers
Rain Drain
Ø 70
24
Installation tips, planning guidelines, instructions
Installation tip To drill connections in, clamp the iBox universal in the pipe insert using a vice.
Skeleton installation Build in the basic unit in such a way that the hot water is connected on the left and the cold water is on the right. Installation depth 80 mm to 108 mm Extension set 25 mm Item No. 13595000 Extension set 22 mm Item No. 13596, -000, -810, -880 Item No. 13597, -000, -880 Item No. 97407000 The basic unit can be installed according to the needs of the site. The iBox universal is suitable for both bathtubs and showers. For single lever bath mixers, outflow 1 takes priority. For shower installations, the outflow that is not required must be sealed with a plug.
Rinsing Rinse the whole installation in accordance with DIN 1988/EN 1717. The arrows on the rinsing block show which supply pipe is connected to which outflow pipe, e.g. cold water with outflow 1 and hot water with outflow 2. If only one outflow is required, the rinse block must be rotated 90° after the first rinsing process.
Outflow 2
Hot The iBox rotational symmetry basic unit can be used anywhere, either horizontally or vertically, except for installation of a bath faucet with safety combination, where only vertical mounting is possible.
Cold
iBox® universal in combination with an Exafill spout with drain and overflow system Turning off the water to the Exafill during the construction phase
Skeleton installation 1. Install iBox universal (vertically only) 2. Lay connections to Exafill and fit metal plugs 3. Rinse pipes and test for pressure and leaks
Placing bathtub 1. Turn off water 2. Mount bathtub with Exafill and connect to pipes 3. Rinse pipe to Exafill with test spout extensions and check whether it is watertight and check whether it is watertight 4. Turn off water at water meter on floor of building 5. Disassemble rinse block 6. Insert plug (A) in outflow for Exafill 7. Assemble rinse block 8. Turn on water
Outflow 1 These easy to understand, illustrated assembly instructions with many practical tips in paperback format can be ordered directly from Hansgrohe. # 84000928
25
Dimensioned drawings and technical information
iBox® universal technical information Operating pressure: recommended operating pressure: Test pressure: (1 MPa = 10 bar = 147 PSI) Hot water temperature: Recommended hot water temperature: Connection dimension: Connections: Free through-flow at 0.3 MPa Bath mixer bathtub outflow: Bath mixer shower outflow: Shower mixer: Thermostat: Thermostat with shut-off valve: Thermostat with shut-off and diverter valve: Highflow thermostat: Quality mark:
max. 1 MPa 0.1 – 0.5 MPa 1.6 MPa max. 80 °C 65 °C G ¾" cold–right, hot–left 31 l/minute. 24 l/minute. 32 l/minute. 43 l/minute. 26 l/minute. 26 l/minute. 58 l/minute. DVGW, SVGW
iBox universal front and side view
iBox® universal Outflow 2 e.g. shower Cold
Hot
SW 5 mm
35x 2 Outflow 1 e.g. bathtub 9x2
Extension 25 mm
26
Extension 22 mm (at low installation depth)
Raindance® Shower panel® Front and side view
Raindance® Rainfall® View from below and side view
Room Height
Standing Area Cement Floor
imodul® Front and side view
27
Product overview Hansgrohe ® faucet lines
28
Metropol ® S
Metropol ® E
Metris ® S
Metris ® E
Talis ® S
Single lever basin mixer # 14061, -000, -880
Single lever basin mixer # 14070, -000, -090
Single lever basin mixer # 31060, -000
Single lever basin mixer # 31070, -000
Single lever basin mixer # 32020, -000
Talis ® S 2
Talis ® E 2
Focus ® S
Focus ® E
Single lever basin mixer # 32040, -000
Single lever basin mixer # 31612, -000
Single lever basin mixer # 31701, -000
Single lever basin mixer # 31700, -000
Ecostat® S
Ecostat® E
iBox® universal
Thermostat finish set # 15711, -000, -880
Thermostat finish set # 15710, -000, -090, -880
iBox universal # 01800180 Extension basic set # 13595000 Extension finish set (Ø 170 mm) # 13596000 Extension finish set (Ø 150 mm) # 13597, -000, -880 Mounting rail set # 96615000
Hansgrohe ®finish sets Single lever mixer Metropol® S
Metropol® E
Metris® S
Metris® E
Talis® S
Single lever concealed installation bath mixer
14465
14475
31465
31475
32475
Single lever concealed installation bath mixer, safety combination
14466
14477
31466
31476
32477
Single lever concealed installation shower mixer
14665
14675
31665
31675
32675
Chrome
Chrome
Chrome
Talis® E2
Focus® S
Focus® E 31744
Available with the following surfaces
Chrome, Satin Chrome
Talis® S2
Chrome, Chrome/ Gold-optic
Single lever concealed installation bath mixer
32475
31645
31743
Single lever concealed installation bath mixer, safety combination
32477
31646
–
–
Single lever concealed installation shower mixer
32675
31666
31763
31761
Available with the following surfaces
Chrome
Chrome
Chrome
Chrome
These products are available only with a collar diameter of 150 mm.
Thermostats Ecostat® S
Ecostat® E
Concealed installation thermostat
15711
15710
Highflow concealed installation thermostat
15715
–
Concealed installation thermostat with shut-off valve
15701
15700
Concealed installation thermostat with shut-off and diverter valve
15721
15720
Concealed installation shower thermostat with electric Start/Stop button
15740*
15740*
Chrome, Satin Chrome, Available only in Steel
Chrome, Chrome/ Gold-optic Available only in Chrome
Available with the following surfaces
Please always include the surface finish at the end of each order number: -000 Chrome, -090 Chrome/Gold-optic, -800 Steel, -880 Satin Chrome 29
Product overview Axor ® Collections
Axor ® Starck
Single lever basin mixer # 10111, -000
30
Axor ® Starck Classic
Axor ® Starck X
Axor ® Citterio
Single lever basin mixer # 10010, -000
Single lever basin mixer # 10070, -000
Single lever basin mixer # 39010, -000
Axor ® Massaud
Axor ® Uno 2
Axor ® Uno
Axor ® Steel
Single lever basin mixer # 18020, -000
Twin handle basin mixer # 38040, -000
Single lever basin mixer # 38000, -000
Single lever basin mixer # 35002, -800
Axor ® Terrano
Axor ® Carlton
Axor ® Montreux
Twin handle basin mixer # 37030, -000, -810
Single lever basin mixer # 17010, -000, -090, -120, -810
Twin handle basin mixer # 16502, -000, -820, -830
Axor ® finish sets
Axor® Starck
Axor® Axor® Starck Classic Starck X
Axor® Citterio
Axor® Massaud
Single lever concealed installation bath mixer
10416
10415
10445
39455
18455
Single lever concealed installation bath mixer, safety combination
10418
10417
10447
39457
18457
Single lever concealed installation shower mixer
10616
10615
10645
39655
18655
Concealed installation thermostat
10710
10710
10716
–
18740
Concealed installation thermostat, cross handle
–
–
–
39715
–
Concealed installation thermostat, lever handle
–
–
–
39710
– 18741
Highflow concealed installation thermostat
10715
10715
10717
–
Highflow concealed installation thermostat, cross handle
–
–
–
39716
–
Highflow concealed installation thermostat , lever handle
–
–
–
39711
–
Concealed installation thermostat with shut-off valve
10700
10700
10706
–
18745
Concealed installation thermostat with shut-off valve, cross handle
–
–
–
39705
–
Concealed installation thermostat with shut-off valve, lever handle
–
–
–
39700
–
Concealed installation thermostat with shut-off and diverter valve
10720
10720
10726
–
18750
Concealed installation thermostat with shut-off and diverter valve, cross handle
–
–
–
39725
–
Concealed installation thermostat with shut-off and diverter valve, lever handle
–
–
–
39720
–
Chrome
Chrome
Chrome
Chrome
Chrome
Axor® Uno2
Axor® Uno
Axor® Steel
Axor® Terrano
Axor® Carlton
Axor® Montreux
Single lever concealed installation bath mixer
38425
–
35425
37455
17415
–
Single lever concealed installation bath mixer, safety combination
38427
–
35427
37417
17417
–
–
38405
–
–
–
–
Single lever concealed installation bath mixer, Zero handle, safety combination
–
38407
–
–
–
–
Single lever concealed installation bath mixer, U handle
–
38415
–
–
–
–
Available in the following surfaces
Single lever concealed installation bath mixer, Zero handle
Single lever concealed installation bath mixer, U handle, safety combination
–
38417
–
–
–
–
38625
–
35625
37655
17615
–
Single lever concealed installation shower mixer, Zero handle
–
38605
–
–
–
–
Single lever concealed installation shower mixer, U handle
–
38615
–
–
–
–
38375
38375
35710
–
–
–
–
–
–
37715
17715
16810
17710
Single lever concealed installation shower mixer
Concealed installation thermostat Concealed installation thermostat, cross handle Concealed installation thermostat, lever handle
–
–
–
37710
38715
38715
35715
–
–
–
Highflow concealed installation thermostat, cross handle
–
–
–
37716
17716
16815
Highflow concealed installation thermostat, lever handle
–
–
–
37711
17712
–
38700
38700
35700
–
–
–
–
–
–
37705
17705
16800 –
Highflow concealed installation thermostat
Concealed installation thermostat with shut-off valve Concealed installation thermostat with shut-off valve, cross handle Concealed installation thermostat with shut-off valve, lever handle
–
–
–
37700
17700
Concealed installation thermostat with shut-off and diverter valve
38720
38720
35720
–
–
–
Concealed installation thermostat with shut-off and diverter valve, cross handle
–
–
–
37725
17725
16820
Concealed installation thermostat with shut-off and diverter valve, lever handle
–
–
–
37720
17720
–
Chrome
Chrome
Steel Look
Chrome, Satinox
Chrome, Chrome/ Gold-optic, Satinox, Chrome/ Porcelain
Chrome, brushed Nickel, polished Nickel
Available in the following surfaces
Please always include the surface number at the end of each order number: -000 Chrome, -090 Chrome/Gold-optic, -120 Chrome/Porcelain, -800 Stainless steel look, -810 Satinox, -820 Brushed Nickel, -830 Polished Nickel 31
The iBox universal revolutionised concealed installation, making it safer and easier. Now, working closely with experienced installers, Hansgrohe has re-worked and improved this popular product.
So what do these improvements mean for you? Which tried and tested elements have remained the same? And to what extent does the iBox universal make it easier to install Hansgrohe’s latest shower innovations? This technical guide provides answers to all your questions about the iBox universal and concealed installation. It also demonstrates the many opportunities that the iBox universal offers you and your customers when you combine it with Hansgrohe’s new shower systems.
SOE/en-iBox® universal, planning and installation 2007 · Subject to technical alterations and colour differences due to the printing process. Form-No. 84 120 163 · 06/07/3.5 · Printed in Germany · Printed on 100% chlorine free bleached paper · MRH, Freiburg
Visit www.hansgrohe.com to download further technical product information.
Hansgrohe · P.O. Box 1145 · D-77757 Schiltach · Tel. +49 7836 51-0 Fax +49 7836 51-1300 · info @ hansgrohe.com · www.hansgrohe.com