Amita FOG Machine by yao jyun

GUSTO PROFESSIONAL SERIES GUSTO series, DMX digital foggers, establish their eminence in the market with unique innovation and professional technique. Thanks to their high security and easy maintenance, GUSTO series are perfectly adapted for locations of professional performance. There are our optional models: GT-1000, GT-1250, GT-1800 and GT-3500, with the following characteristics:

Sharp Modularization The entire machine is assembled with a heating module, a pump module and a circuit module. The innovative design completely solves the problem that the circuit and other parts interfere with one another while dismantling for maintenance or repair. Each of the three modules is independent, and does not affect the others, and that is what makes the maintenance so direct and easy. At the same time, you can easily disassemble the lateral sides to take out the broken heating module or the pump module, or the rear side to replace the circuit module. Such intelligent and ideal design makes the maintenance most humanized and simple.

Security The die-cast heating module is perfectly covered and sealed with iron shell. Even under such circumstances as the fixture is over heating or the secure parts is out of control, no hazard will happen. Furthermore, the lowliquid sensor detects shortage of liquid and warns the pump to cut oil supply automatically so as to prevent from damaging or accidentally firing.

High Efficiency The die-cast heating module fastens heat transmission and therefore, shortens the heating cycle. The break-through design of double heating pipes for GT-1800 & GT-3500 even enhances significantly the heating efficiency.

Economical Power Consumption Power-saving device enables GT-1800 and GT-3500 to cut automatically power consumption during stand-by, which impressively realizes power saving up to 50%.

Convenience GUSTO is a series of DMX digital foggers which can be conveniently connected with other Foggers and DMX stage equipment for operation. Besides, the series can be operated by exteriorly connected controllers (e.g. TC-3, DC-3, DC-3S) to control fogging time and volume. Our high-quality fog liquid is a perfect match for the series to maximize the fogging effect.

Professional Fog

DC-3S, the built-in digital display controller makes the operation of GT-3500 direct and user-friendly. The cable of DC-3S is 10m.

The entire machine is assembled with a heating module, a pump module and a circuit module. Each of the three modules is independent; makes the maintenance easy and convenient.

GUSTO Seriesâ&#x20AC;&#x201C;GT-3500 You can easily disassemble the rear side to replace whole circuit module.

Efficient, Perfect, User-friendly Capacitated for 3500W output volume, the extraordinary GT-3500 is a masterpiece among the professional foggers, a representative resulting from professional high-tech. The dual-aluminum heating pipes enhance heat transmission efficiency, and enable you to create spectacular fogging effect without much heating time. The innovative device for economical power consumption can save energy up to 50%. The built-in digital display controller (DC-3S) makes the operation of GT-3500 direct and user-friendly, while the low-liquid-level sensor guarantees operation security. Dual-piped heating module, innovative design of easy-disassembly shell at three sides, and direct-replacement of modules significantly improve maintenance efficiency as well as operation safety.

Product specifications POWER

3300W

FUSE(230V,240V)

NFB 16A

Warm Up time(min)

Fog Output (cu.ft/min)

50000

Tank (liters)

6.5

Bracket

YES

Dimensions (LxWxH, W/Handle)

663x300x249 mm

Weight (kg)

18.5kgs

Voltage

230V, 240V /50Hz

DMX512 CH.

DMX 1CH or 3CH

Matching Controller (Optional)

DC-3, DC-3S

Matching Controller (Included)

Built-in DC-3S

* Voltage is preset at factory and may not be changed.

Super-powerful GT-3500 creates spectacular effects without making any noise. The innovative oil providing system performs vaporizing process through one-piece jointless die-cast heating module and as a result, reduces the possibility of nozzle blockage to minimum. Even when emitting continuously as large volume as 50,000 cu.ft/min, the fogger still works in perfect order. Use our non-toxic high-quality water-based liquid to maximize the fogging effect, and you can relax and enjoy the stage performance. GT-3500 is distinguished for its excellent quality and perfect capability. Our innovation continuously improves its operation safety and makes it the first choice for all large stage performance.

Professional Fog

Dual-piped heating module accelerates the speed of heat transmission and substantially improves the heating efficiency.

The patented low-liquid-level sensor which automatically stops the pump when short of liquid.

GUSTO Seriesâ&#x20AC;&#x201C;GT-1800 DC-3S, the built-in digital display controller makes the operation of GT-3500 direct and user-friendly. The cable of DC-3S is 10m.

Economical, Noiseless, Secure One of the traits that distinguish GT-1800 from other foggers is the advanced device for economical power consumption. When the machine is standing by, it perfectly handles the heat exchange and automatically decreases power rate up to 50%. It is unquestionably an energy-saving expert. Dual-piped heating module, upgraded from the single-heating-pipe design, accelerates the speed of heat transmission and substantially improves the heating efficiency. Innovative oil providing system performs vaporizing process through one-piece jointless die-cast heating module, and significantly reduces the possibility of nozzle blockage, resulting in more purified smoke that reflects much better visual lighting effect. In addition to the protection by the patented low-liquid-level sensor which automatically stops the pump when short of liquid, the design of separating the liquid tank from the fixture itself allows the tank to be taken off freely without breaking any wires. All the designs aim to provide you with the maximum safety.

Product specifications POWER

1700W

FUSE(120V)

NFB 16A

FUSE(230V,240V)

NFB 9A

Warm Up time(min)

Fog Output (cu.ft/min)

30000

Tank (liters)

6.5

Bracket

YES

Dimensions (LxWxH, W/Handle) 613x300x249 mm Weight (kg)

14kgs

Voltage

120V, 230V, 240V 50/60Hz

DMX512 CH.

DMX 1CH or 3CH

Matching Controller (Optional)

DC-3, DC-3S

Matching Controller (Included)

Built-in DC-3S

* Voltage is preset at factory and may not be changed.

GT-1800, featuring economical power consumption, noiselessness in operation and abundant production of dense fog, perfects every performance in any large theatre or conference, and even fire drills.

Professional Fog

The innovative circuit module design can easily disassemble the rear side to replace whole circuit module.

Operate with our timing controller, TC-3, to control fogging interval, duration and volume and have excellent fogging effect.

GUSTO Seriesâ&#x20AC;&#x201C;GT-1250 Fashionable, Professional, Advanced GT-1250, a professional fogger, adopts the die-cast aluminum heating module, which speed up heat transmission and therefore, shortens its heating time. The heating module also significantly facilitates maintenance and replacement. With quick and steady fogging effect, the powerful GT-1250 matches well with the vibrant light and music on the stage and electrify the atmosphere. Moreover, the oil providing system performs vaporizing process through jointless die-cast aluminum heating module, and reduces the possibility of nozzle blockage to minimum. The new generation of GT-1250 is characterized with easy disassembly on three sides of shell, patented design of low-liquid-level sensor, and special design of circuit module. All the advanced technology and bold innovation make GT-1250 more secure, convenient and humanized. Undoubtedly GT-1250 is an excellent performer in night clubs, exhibitions, balls and even small theater, presenting the most vivid atmosphere and effect. Operate with our timing controller (TC-3) or digital display controller (DC-3, plastic casing) to control fogging interval, duration and volume and have excellent fogging effect. The powerful optional controllers definitely make GT-1250 a more valuable choice.

Product specifications POWER

1200W

FUSE(120V)

13A

FUSE(230V,240V)

Warm Up time(min)

Fog Output (cu.ft/min)

20000

Tank (liters)

Bracket

YES

Dimensions(LxWxH, W/Handle)

418x220x209mm

Weight (kg)

7.5kgs

Voltage

120V, 230V, 240V 50/60Hz

DMX512 CH.

DMX 1CH or 3CH

Matching Controller (Optional)

TC-3, DC-3

Matching Controller(Included)

TC-3

* Voltage is preset at factory and may not be changed.

Professional Fog

The patented low-liquid-level sensor which automatically stops the pump when short of liquid.

The entire machine is assembled with a heating module, a pump module and a circuit module. Each of the three modules is independent; makes the maintenance easy and convenient.

GUSTO Seriesâ&#x20AC;&#x201C;GT-1000 Innovative, Safe, Easily-maintained Technically innovated and securely guaranteed, GT-1000 occupies an indispensable position in the market, characterizing easy maintenance and maximal operation safety. With the innovative shell design featuring easy disassembly on three sides, GUSTO series make maintenance most convenient and simple. You can directly open the lateral sides to replace the heat module or the pump module, or open the rear side to take off the broken circuit module. The independent design of the three modules dramatically facilitates the maintenance. The patented low-liquid-level sensor automatically stops the pump from providing oil once it detects lack of liquid. This outstanding feature not only helps to avoid burning damage, enhancing operating security, but also successfully separates the tank from the mechanism, allowing the tank to be taken away from the fixture anytime without breaking any connection. Quality guaranteed by professional technology, GT-1000 creates an amazing effect for a ball or an exhibition with its short heating time and large fogging volume.

Product specifications POWER

1000W

FUSE(120V)

12A

FUSE(230V,240V)

Warm Up time(min)

4.5

Fog Output (cu.ft/min)

10000

Tank (liters)

Bracket

YES

Dimensions(LxWxH, W/Handle)

378x220x209 mm

Weight (kg)

6kgs

Voltage

120V, 230V, 240V 50/60Hz

DMX512 CH.

DMX 1CH

Matching Controller (Optional)

LC-1X, RC-1X, TC-1X

Matching Controller (Included)

LC-1X

* Voltage is preset at factory and may not be changed.

(AF-1700DX/AF-1700SDX)

ATMOS DMX fog machine is multi-function professional that has passed strict tests under imitated environments and certification of safety regulations. DMX ON BOARD permits uses through connection to any DMX console. Built-in function of timing control allows easy timing control through manual operation on the Duration & the Interval knobs. ATMOS DMX professional is the most valuable fog machine that has been expected. AF-1700DX/AF-1700SDX is equipped with die-cut heating module. Heating transmission is more effective. Heating time of every fogging circulation is shortened, and output (cu. Ft/min) based on the same power is more abundant compared with other brand names. It can also output continuously volumes of smoke. Problem of nozzle jam will hardly happen. ATMOS DMX professional has the vertical heating tube separated from the bottom base. This design successfully blocks the noise. The vertical heating tube occupies small space, which allows the machine to have better volume for big and movable liquid tank, and to elevate its mobility at the same time. When shortage of oil is detected, the safety function of low liquid warning can automatically cut the power off of pump to prevent the interior parts from being damaged, and to assure the safety of the machine and the using environment. Powerful output and volumes of dense smoke puffed within a short time characterize ATMOS DMX professional as a master piece to perfectly animate performance of any large-scale concert as well as launching ceremony. Strict and long-time environmental tests let ATMOS DMX professional be the very suitable product used for concerts, displays, dance halls and firefighting maneuvers. ATMOS DMX professional not only can accept DMX control, but also can select wire controller LC-5, wireless controller RC-5, or timer TC-3X for easy control. Master/Slave synchronous control can be realized by the built-in timing control function or the optional controllers (LC-5, RC-5 & TC-3X). Furthermore, the smoke effect can be flawless using high-quality fog liquid made by JyunYao. Atmos DMX Fog Machines provide superior performance due to: • DMX on board, operate by any additional DMX controller. • Built-in function of timing control allows easy timing control through manual operation on the

Duration & the Interval knobs. The indicating light on the back panel will indicate adjusted timing. • Humanized warning function for abnormal status: In case the fogger has any abnormal

functioning, the indicating light on the back panel will be flashing as warning to let the user be aware of the problematic situation in time. • Manual fogging can be operated directly from the back panel of the machine. Manual fogging is

prior to other fogging operations of the easy controller & built-in timing function. But when DMX control is selected, all manual control functions stop. • Fogging volume can be adjusted under DMX operation mode or by the outside connected TC-3X

controller. • High output fog machine, approx. 21,000 cu.ft/min output. • Electronic Thermo Sensing (ETS) – electronic heater stay hot at all times between fog blasts. • Advanced heater system - aluminum die-cast heater prevents clogging. • Advanced oil-level sensor detects shortage of oil and warns the pump to cut the oil supply automatically. • Direct thermal protection. • Master / Slave mode can be operated either by the built-in timing control or by outside connected

controller, LC-5, RC-5, or TC-3X. Simple and humanized design makes the fogger easier for use.

Product specifications Model

AF-1700DX

AF-1700SDX

Case Color

Black

Silver

Power

1600W

DMX Channel

2CH

Built-in Function

Timing – Duration & Interval

Fuse (120V)

NFB 20A

Fuse (230V)

NFB 10A

Output (c.ft/min)

21000

Tank (Liter)

Warm up time (min)

Voltage

120V/60Hz,230V,240V/50Hz

120V/60Hz, 230V,240V/50Hz

Dimensions(LxWxH, W/O Bracket)

435x280x295mm(W/Handle)

435x280x295 mm(W/Handle)

Weight

10.5 kg

Matching Controller(Optional)

LC-5, RC-5 or TC-3X

* Voltage is preset at factory and may not be changed.

Professional Fog

ATMOS DMX Fog Machine

Fog Machine

ATMOS SERIES ATMOS, a versatile effect-creator, produces a series of high-quality fog machine: AF-800/800S, AF-900/900S, AF-1200/1200S and AF-1700/1700S . The smart and compact series feature the unique die-cast-aluminum heater system for faster and more efficient heat transfer, allowing them to produce dense fog continuously and reducing the possibility of nozzle blockage to minimum. The unique design makes ATMOS series ultra-quiet during operation and also saves much space for a larger oil tank. The series are ideal for theatres, show rooms, ballrooms and clubs use, operating with our line controllers (LC-1, LC-2S), remote controllers (RC-1, RC-2), timing controllers (TC-1, TC-2), or DMX controller (DMX-2) for powerful fogging effect. Our high quality water-based fog liquid is optimized for use with ATMOS fog machines.

AF-1700

AF-1200

• 1600W heater

• 1100W heater

• Equipped with

low-fluid sensors, which will automatically stop pumping

low-fluid sensors, which will automatically stop

once fluid level is too low.

pumping once fluid level is too low.

• 8 minute heat up time

• Approx. 21000 cu. Ft/min output

• Approx. 7000 cu. Ft/min output

• 5 liter fluid container

• 2.5 liter fluid container

• Direct thermal protection

• Operate by line controller (LC-1), remote controller (RC-1),

timing controller(TC-1), or DMX controller(DMX-2)

AF-900

AF-800

• 700W heater

• 5 minute heat up time

• Approx. 3500 cu. Ft/min output

• 0.9 liter fluid container

• Direct thermal protection

• Operate by line controller (LC-1), remote controller (RC-1),

• Operate by line controller (LC-2), remote controller (RC-2),

timing controller(TC-1), or DMX controller(DMX-2)

timing controller (TC-2)

Atmos series specifications ITEM NO.

AF-800/800S

AF-900/900S

AF-1200/1200S

AF-1700/1700S

Color

Black or Silver

Power

700W

1200W

1600W

Fuse (120V)

T10A/250V

T12A/250V

NFB 20A

Fuse (230V, 240V)

T5A/250V

T7A/250V

NFB 10A

Warm Up Time (min)

Output (cu. ft/min)

3500

7000

21000

Tank (liters)

0.9L

2.5L

Voltage

120V/60Hz,230V/50Hz

Dimensions (LxWxH, W/O Bracket)

235x149x136 mm

310x220x161 mm

435x280x395 mm(W/Handle)

Weight (kg)

3.3

5.4

Matching Controller(Optional)

LC-2S,RC-2,TC-2

LC-1,RC-1,TC-1,DMX-2

* Voltage is preset at factory and may not be changed.

FOG MYTH, a master of atmosphere inspiration, presents a new range of fog machines: FM-800, FM-1200, and FM-1800. Boasting a unique heating system that reduce dramatically the heating time, Fog Myth series can produce fog powerfully and steadily without making any noise. Produced under stringent quality control system, Fog Myth series aim to provide maximum operation safety for users. The professional “heavy-duty” fog machines of FM-1200 & FM-1800 are equipped with low-fluid sensors, which will automatically stop pumping once fluid level is too low. FOG MYTH series are well matched with our line controllers (LC-1, LC-2S), remote controllers (RC-1, RC-2), timing controllers (TC-1, TC-2), and DMX controller (DMX-2) and are perfect for nightclubs, exhibition halls, and ballrooms etc. Use our high quality water-based fog liquid to optimize the performance of Fog Myth series.

FM-800

FM-1200

FM-1800

• 700W heater

• 1100W heater

• 1600W heater

• 5 minute heat up time

• Equipped with low-fluid sensors, which

• Approx. 3500 cu. Ft/min output

will automatically stop pumping once

• 0.9 liter fluid container

fluid level is too low.

• Direct thermal protection

• 8 minute heat up time

• Operate by line controller

• Approx. 7000 cu. Ft/min output

• Approx. 21000 cu. Ft/min output

(LC-2S), remote controller (RC-2),

• 2.5 liter fluid container

• 5 liter fluid container

timing controller (TC-2)

• Direct thermal protection

• Operate by line controller

(LC-1), remote controller

(RC-1), timing controller(TC-1), or

DMX controller(DMX-2)

Fog myth series specifications ITEM NO.

FM-800

FM-1200

FM-1800

Color

Black or Silver

Power

700W

1200W

1700W

Fuse (120V)

T10A/250V

T12A/250V

NFB 20A

Fuse (230V, 240V)

T5A/250V

T7A/250V

NFB 10A

Warm Up Time (min)

Output (cu. ft/min)

3500

7000

21000

Tank (liters)

0.9L

2.5L

Voltage

120V/60Hz,230V/50Hz

Dimensions(LxWxH, W/O Bracket)

235x149x136 mm

310x220x161 mm

435x280x295 mm(W/Handle)

Weight (kg)

3.25

6.10

11.6

Matching Controller(Optional)

LC-2S,RC-2,TC-2

LC-1,RC-1,TC-1,DMX-2

* Voltage is preset at factory and may not be changed.

Fog Machine

FOG MYTH SERIES

Hazer

Super Hazer 400 is for DMX signal control, permitting use of any DMX controller. SHZ-1C easy controller is specially designed for Super Hazer 400.

Super Hazer 400 is designed with two independent nozzles, which can generate respectively volumes of haze.

Super Hazer 400

(SHZ-400)

DMX Super Hazer 400, Haze Effect of High Light-Peneration Select Super Hazer 400 to make fog effect of high light-penetration. Super Hazer 400 is able to generate harmless, dry and clean haze of high light-penetration, which is excellent for matching different kinds of lighting shows including traditional lightings, LED lightings and lasers, etc.

The haze generated by a procedure without heating up contributes much better effect of penetration. The specific gravity of the particle of the haze is similar to the air, so it can stay in the air longer.

Product specification Power

420W

Heater power

400W

Fuse (120V)

Fuse (230V, 240V)

Warm up time (min)

Fog output (cu.ft/min)

2800

Tank (liters)

2.5

Hanging Bracket

YES

Dimensions (LxWxH, W/Handle)

500x341x285 mm

Weight (kg)

Voltage

120V,230V, 240V 50/60Hz

DMX Control

DMX 1CH

Mach Controller

SHZ-1C

* Voltage is preset at factory and may not be changed.

Super Hazer 400 has equipped inside a professional air compressor, which is maintenance-free, a precise system of haze transmission, and a liquid tank of large volume. Super Hazer 400 is designed with two independent nozzles, which can generate respectively volumes of haze. The haze generated by a procedure without heating up contributes much better effect of penetration. The specific gravity of the particle of the haze is similar to the air, so it can stay in the air longer. This character makes Super Hazer 400 be an excellent implement for lighting shows. The super powered compressor of Super Hazer 400 is quiet and highly effective. It is suitable to be used in any kinds of professional occasions. Super Hazer 400 is for DMX signal control, permitting use of any DMX controller. SHZ-1C easy controller is specially designed for Super Hazer 400. Super Hazer-400 is a perfect master piece characterized by the function of generating volumes of haze of high light-penetration and high quality as well as the high stability, low power consumption, high safety and quietness. It is no doubt at all that Super Hazer 400 is professional at the top level.

Hazer

When detected low liquid by the patented sensor device, power cutting functions automatically to prevent interior spare parts from damage.

Super Hazer 80

Super Hazer 80 is equipped with die-cut heating module, quiet fan and big liquid tank.

(SHZ-80T/80D)

Super Hazer 80, Haze Maker of High Efficiencyâ&#x20AC;&#x201C;SHZ-80T/80D

The heating module of high efficiency allows Super Hazer 80 to make volumes of haze in a short time and to disperse the haze evenly in the whole space.

Super Hazer 80 is high efficiency of heating. It is compact for easy movement. It can make volumes of harmless and dry haze that is perfectly suitable for matching with any kind of traditional lightings, LED lightings and Lasers in any performance. Super Hazer 80 is equipped with die-cut heating module, quiet fan and big liquid tank. The heating module of high efficiency allows Super Hazer 80 to make volumes of haze in a short time and to disperse the haze evenly in the whole space. When detected low liquid by the patented sensor device, power cutting functions automatically to prevent interior spare parts from damage. The fan is quiet and effective. The dry and long lasting haze effect makes Super Hazer 80 excellent for matching with any kinds of lightings. TC-4 timer controller and DMX signal convertible DMX-2X controller are further options to elevate the utility of Super Hazer 80. Super Hazer 80, perfect combination of high qualified haze in volumes, high stability and safety, high efficiency and quietness, presents its admirable value as the most wanted hazer.

Product specification Power

700W

Heater power

650W

Fuse (120V)

10A

Fuse (230V, 240V)

Warm up time (min)

Fog output (cu.ft/min)

1500

Tank (liters)

Hanging Bracket

YES

Dimensions (LxWxH, W/Handle)

493x220x200 mm

Weight (kg)

7.10

Voltage

120V,230V, 240V 50/60Hz

Mach Controller

TC-4, DMX-2X

* Voltage is preset at factory and may not be changed.

Effect Fog

One-piece jointless diecast heating pipe elevates heating efficiency and prevents nozzle jam.

Cyclone Fogger

(CF-1500)

Stunning Output in Vertical

Such specially designed heater sealed with iron guarantees absolute safety to the users even in case all thermo sensor system is out of work and results high temperature to melt aluminum as liquid, because the liquid will be absolutely blocked.

Cyclone Fogger of vertical output is born as professional with DMX control. Its powerful vertical output creates outstanding fog effect. One-piece jointless die-cast heating pipe elevates heating efficiency and prevents nozzle jam. Such specially designed heater sealed with iron guarantees absolute safety to the users even in case all thermo sensor system is out of work and results high temperature to melt aluminum as liquid, because the liquid will be absolutely blocked. Powerful fogging with low power consumption is no doubt an indispensable advantage in this era short of energy. Patented function of sensing low liquid will automatically force the pump to stop working, so that prevents parts damage. Strong outer shell, handle of friendly use and Liquid tank of large volume accomplish Cyclone Fogger perfect. Wire controller LC-1X, wireless controller RC-1X and timer TC-1X are optional for operating Cyclone Foggers with excellent conditions. Cyclone Foggers can be easily installed in theater and studio. They are also the most wanted for creating special and attractive effect in large scale shows, concert, DJ touring and clubs.

Product specification Power

1600W

Heater power

1500W

Fuse (120V)

15A

Fuse (230V, 240V)

Warm up time (min)

6.5

Fog output (cu.ft/min)

25000

Tank (liters)

Hanging Bracket

YES

Dimensions (LxWxH, W/Handle)

315x250x202 mm

Weight (kg)

7.2

Voltage

120V,230V, 240V 50/60Hz

DMX Control

DMX 1CH

Mach Controller

LC-1X, RC-1X, TC-1X

* Voltage is preset at factory and may not be changed.

Bubble Master

Equipped with Double Bubble Wheel, Bubble Master constantly produces volumes of firm bubbles.

(BB-100)

The most wanted Bubble Master makes dancing parties full of fun. Equipped with Double Bubble Wheel, Bubble Master constantly produces volumes of firm bubbles. Its big mouth blows strongly volumes of bubbles to the air, and also recycles the bubble liquid at the same to avoid liquid leaking. The bottom base of the die-cut plastic case is completely sealed, so that the liquid will not easy to spill when the machine is being moving. Easy for bubble liquid supply plus the handle for direct holding make Bubble Master absolutely user-friendly in different kinds of locations, celebration parties, dancing parties and shows.

The bottom base of the die-cut plastic case is completely sealed, so that the liquid will not easy to spill when the machine is being moving.

Bubble Master can work with wire controller and wireless controller. Without doubt, Bubble Master is the best helper for creating the best activity atmosphere.

Product specification Power consumption

25W

Tank capacity

Fluid Consumption Rate

2 hr/liter

Weight

1.88 kg

Dimensions (LxWxH, W/Handle )

352x176x209 mm

Power Input

120V,230V, 240V 50/60Hz

Optional Remotes

LC-3, RC-3

Mach Controller

LC-3S

* Voltage is preset at factory and may not be changed.

Party Fog

Mobile Party Fog Machine 400W & 800W Small Fog Machine

High Mobility, High Safety, Hiht Innovation The miniature, lightweight 400W/800W fog machine are new models of thermal conductivity type fog machine specially designed for commercial market. After passing various stringent environment simulation tests and safety specification certification, this mobility foggers swept the fog machine market with a fresh new look. Its mechanized production and strict processing control ensured conformity to quality control that is why 400W/800W fog machines have a very stable quality. With respect to strong demand for security by the commercial market, the new design of this mobility fog machine specifically targeted the triple safety protection. Even if there are damages in some parts of the machine, it can still give the safest protection and provide customers with maximum safety. With puffing flow (output) of around 2000 (400W) and 3500 (800W) cu.ft/min, 400W/800W foggers are very suitable for use in small exhibitions, family parties, mini bars or small commercial spaces. Features: • A special heating element design that prevents blockage, giving years of use. • A wide-angle fog output, which use of jointless oil transmission pipeline system minimizes the possibility of blockage. • An easy-to-use design made for convenient operation in various settings. • Mobility, compact and lightweight exterior. • Its fully automatic mechanical production provided stable quality. • Triple safety protection gave consumers more security. • High-performance pump for great fog output. • Can directly use fog switch on the back(optional) or use line controller LC-2X.

Product specifications Model

DEO-400

DEO-400S

DEO-800

DEO-800S

GT-400

GT-800

Color

Black

Silver

Black

Silver

Black & Silver

Power

400W

800W

400W

800W

Fuse (120V)

Fuse (230V)

Heating Time (minute)

4.5

Output (cu. ft/min)

2000

3500

2000

3500

Tank (liters)

0.6

Hanging bracket

YES

Voltage

120V,230V, 240V 50/60Hz

Dimensions ((LxWxH, W/Handle)

235 x148x174 mm

243 x148x177 mm

Weight (kg)

2.2

2.4

2.2

2.4

Matching Controller (Included)

LC-2X

* NOTICE: Voltage is preset at factory and may not be changed.

Fog Machine Controller

Fog Liquid

Product specifications

Local Dealer:

• We are continuously improving and upgrading our products so specifications aresubject to change without notice.