Issuu on Google+


Index Pools Buccaneer Toriba Teardrop Californian Coral Oasis Classic Atlantis Koolabah

Technical Specifications Ground Water


email simon@coralcovepools.com

www.coralcovepools.com

Simon Wooldridge Welcomes you To CoralCovePools, the UK's largest manufacturer of Fibreglass Swimming Pools, We actually manufactured the Swimtek range of Fibreglass Swimming Pools & Spa's for over 18 years. We are now pleased to offer you the Coralcove range of swimspas and swimming pools DIRECT from us the manufacturers of these swimmingpools & swim spa's. We manufacture these on site at Tolgate Ingworth, Norfolk. Buying direct from us means you still get the personal approach from Simon but our prices are considerably lower. Please feel free to contact Simon direct on 07867555068 for 01263761595 for more details of our full range. The CoralCove range of pools come to you direct from our factory ready plumbed with all the necessary fittings attached, including underwater light, surface skimmer, bottom drain, return jets, swim jets (where applicable) and is complete with all necessary pipework attached,so that when the pool is delivered, it is ready to be lowered into the prepared excavation, (Quotations available for full installation). We will assist with levelling the pool and connection of the pipework to the plant area (this is the area where all the pumps andfilters etc will be situated). Included in our DIY package is the benefit of CoralCovePools actually connecting the pumps, filters & heaters.

All Our Prices Include VAT Save ££££ Complete with Pool Kits, Prices exclude Delivery.We can arrange the delivery for you, or if you prefer you can collect your pool on a suitable vehicle.

Manufacturers of Fibreglass Products & Swimming Pools for over 30 years


email simon@coralcovepools.com

www.coralcovepools.com

The CoralCove range of pools come to you direct from our factory ready plumbed with all the necessary fittings attached, including underwater light, surface skimmer, bottom drain, return jets, swim jets (where applicable) and is complete with all necessary pipework attached,so that when the pool is delivered, it is ready to be lowered into the prepared excavation, (Quotations available for full installation). We will assist with levelling the pool and connection of the pipework to the plantarea (this is the area where all the pumps and filters etc will be situated). Included in our DIY package is the benefit of CoralCovePools actually connecting the pumps,filters & heaters.

All Our Prices Include VAT Save ££££ Complete with Pool Kits, Prices exclude Delivery.We can arrange the delivery for you, or if you prefer you can collect your pool on a suitable vehicle.

The Buccaneer £10995 inc Vat Depth 0.9m x 1.8m Pool Information • • • • • • • • • • • • • • • • • • •

The Buccaneer comes complete with the following:

A totally separate spa with seating for up to 5 people Two tone pool shell Non slip surfaces Two surface skimmers and bottom drains (floor suction point) Four spa jets in spa zone Two inlets for warm filtered water to return to pool Underwater light to pool and transformer Underwater light to spa and transformer Chemical start up kit Cleaning Kit consisting of a vacuum hose, vacuum brush head, tele vac pole, test kit, and leaf net Pipe and fittings to connect up to 5 meters from the pool to the plant The Spa is raised slightly higher than the pool, giving a waterfall effect into the main pool Steps at both the deep and shallow ends Underwater safety ledge all around the pool The benefit of being able to have two different temperature zones for the spa and pool water Roller Solar cover Pool heater Hydro Air Activated Spa Seat

Manufacturers in fibreglass Products & Swimming Pools for over 30 years


INSTALLATION INSTRUCTIONS – BUCCANEER 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14.

Determine where, within the curtilage of your dwelling, the swimming pool can be accommodated. Investigate whether there are any mains services where the pool is to be positioned (i.e. water, sewerage, land drains, electricity, gas or telephone). Consult your local planning authority to determine planning permission or building regulations approval is required.. The Datum level for the excavation is the top edge of the pool. Determine a relationship between the Datum and the existing ground level. Detail ‘A’ is a guide. Excavate carefully, and as close to the installation details as is practical. Note that the excavation is shown square and vertical. However, to reduce dig and fill, site adjustments can allow dig to follow pool contours more closely, retaining a minimum 200mm clearance for surrounding dry sand and cement mix fill. Prepare services (i.e. water and electrics). Use timber pegs to accurately establish the 100mm minimum dry sand and cement mix bed level at four positions within the excavation (A,B,C,D). Use a whacker plate to compact dry sand and cement mix screed. Lower pool into excavation and check that the top edge is horizontal and at a height required. Adjust dry sand and cement mix bed if necessary. Fill around the pool with dry sand and cement mix in 200mm layers, compacting with a fine and limited water spraying. At the same time start filling the pool to the height of each dry sand and cement mix layer plus 100mm. When dry sand and cement mix fill is complete, leave surrounding ground uncovered for 2/3 months so as to allow for any possible settlement before attempting to pave or finish off. At all times, before emptying the pool, it is essential that you contact CoralCovepools. ◄—

960 — ►

◄—

1790

The 100mm compact dry sand and cement mix bed must be level width ways and not more than 100mm

Points A&B

4 outside pegs establish the finished height of the pool.

935

SECTION THROUGH EXCAVATION

380 — ►

Datum Line is the top of the edge beam on the pool

Do not over dig the excavation. If you do make sure the extra depth is taken up with crushed rock or other suitable hard fill and compact thoroughly.

IMPORTANT: make sure all pegs are left in place so the excavation can be easily checked by Coralcovepools Outside Peg A

1790 down to dry sand & cement mix base

Deep End

2210

4210

1000

Corner Peg

1000

1790 down to dry sand & cement mix base

Outside Peg C

LAYOUT OF EXCAVATION Please Note These dimensions are variable depending upon site design decisions detail ‘A’ is typical only. The Datum is constant. Carefully read and comply with installation instructions

935 down to dry sand & cement mix base

Shallow End

935 down to dry sand & cement mix base

960

Corner Peg

380 7900

Outside Peg B

Establish 4 corner pegs

Corner Peg Outside Peg D

Provide pegs either side of the pool in positions indicated on the layout. String a line from one to the other as shown, and position a peg to depth required at points A, B, C & D making sure they are level with the first one that you put in across length and depth. The first peg you put in indicates the finished height that you want your pool to be at (i.e. may be level with your damp course on the house wall or a point somewhere else.


email simon@coralcovepools.com

www.coralcovepools.com

The CoralCove range of pools come to you direct from our factory ready plumbed with all the necessary fittings attached, including underwater light, surface skimmer, bottom drain, return jets, swim jets (where applicable) and is complete with all necessary pipework attached, so that when the pool is delivered, it is ready to be lowered into the prepared excavation, (Quotations available for full installation). We will assist with levelling the pool and connection of the pipework to the plant area (this is the area where all the pumps and filters etc will be situated). Included in our DIY package is the benefit of CoralCovePools actually connecting the pumps, filters & heaters.

All Our Prices Include VAT Save ££££ Complete with Pool Kits, Prices exclude Delivery.We can arrange the delivery for you, or if you prefer you can collect your pool on a suitable vehicle.

The Toriba £8995inc Vat Toriba Swimming Pool

Our new Courtyard Pools, the most advanced of their kind in the UK, are testimony to our design excellence. They incorporate finger-touch controls on the Spa and Swim Jet system and three recessed seats with water jets at the shallow end. The pool features: • • • • • • • •

Underwater Light Swimjets Filtration Spa Pump Cartridge Filter Spa Blower Heat Retention Blanket Start Up Chemicals and Test Kit Spa Jets

Manufacturers in fibreglass Products & Swimming Pools for over 30 years


TORIBA EXCAVATION PLAN

8'10" (2692mm)

8'2 ½" (2500mmm)

18' 0" (5485mm)

LAYOUT OF SWIMSPA Moulded PVC skimmer box, bolted and fibreglassed to the pool. Complies with AS 2818 and is compatible with all pool cleaners

Sand Fill

4'5"to bottom lip of edge beam

Fibreglass reinforced ribs to be continuous from cove at floor to reinforced edge beam.

100mm compact dry sand & cement

Side Elevation

Ensure foundations are below base of swimming pool.


4' 6" (1370mm)

4' 6" (1370mm)

100mm dry sand and cement bed

Section through Excavation

10' 0"

(3048mm)

19' 6" (5950mm)

Layout of Elevation Notes for Excavation 1. 2. 3. 4. 5.

If building a block retaining area to surround pool, make length 19'6" x 10'0" wide. Note: this is only essential if planning to cover the pool with a building. Make sure footings are below floor level of pool. Adjust the depth of the hole to suit the required top level of pool being the edge beam. i.e. to allow for having the pool raised above floor level such as to a seat area around pool. Always use clean dry sand and cement mix for backfilling area around pool shell, and support pipework whilst backfilling. DO NOT ALLOW SAND TO DRAG PIPEWORK DOWN. If planning to enclose pool within a building consult with your local planning authorities before commencing building.

6.

Only use water from a hose to gently compact dry sand and cement mix around pool. As you bring the level of water up in the pool backfill with dry sand and cement mix keeping the water level and the rate of backfill equal as possible.

7.

If in any doubt consult Coralcovepools.


email simon@coralcovepools.com

www.coralcovepools.com

All Our Prices Include VAT Save ££££ Complete with Pool Kits, Prices exclude Delivery.We can arrange the delivery for you, or if you prefer you can collect your pool on a suitable vehicle. The CoralCove range of pools come to you direct from our factory ready plumbed with all the necessary fittings attached, including underwater light, surface skimmer, bottom drain, return jets, swim jets (where applicable) and is complete with all necessary pipework attached, so that when the pool is delivered, it is ready to be lowered into the prepared excavation, (Quotations available for full installation). We will assist with levelling the pool and connection of the pipework to the plant area (this is the area where all the pumps and filters etc will be situated). Included in our DIY package is the benefit of CoralCovePools actually connecting the pumps, filters & heaters.

The Teardrop £8995 inc Vat

This new swim spa comes complete with: • • • • • • • • •

Cleaning kit Chemical start up kit Roller Solar cover Heat exchanger Circulation pump and sand filter Spa seat Underwater light Swimjets included

Manufacturers in fibreglass Products & Swimming Pools for over 30 years


Manufacturers in fibreglass Products & Swimming Pools for over 30 years


email simon@coralcovepools.com

www.coralcovepools.com

All Our Prices Include VAT Save ££££ Complete with Pool Kits, Prices exclude Delivery.We can arrange the delivery for you, or if you prefer you can collect your pool on a suitable vehicle. The CoralCove range of pools come to you direct from our factory ready plumbed with all the necessary fittings attached, including underwater light, surface skimmer, bottom drain, return jets, swim jets (where applicable) and is complete with all necessary pipework attached, so that when the pool is delivered, it is ready to be lowered into the prepared excavation, (Quotations available for full installation). We will assist with levelling the pool and connection of the pipework to the plant area (this is the area where all the pumps and filters etc will be situated). Included in our DIY package is the benefit of CoralCovePools actually connecting the pumps, filters & heaters.

The Californian £8995 inc Vat

The pool features: • • • • • • • • • • • • • • • •

Swim jets Corner seat/step at deep end Underwater seats with spa jets Underwater steps at shallow end Two tone pool shell Non slip surfaces Surface skimmer and bottom drain (floor suction point) Inlet for the warm filtered water to return to the pool Underwater light to pool and transformer Circulation pump and sand filter Chemical start up kit Cleaning kit Pipe and fittings to connect up to 5m from the pool to the plant Roller Solar cover Heat exchanger

Manufacturers in fibreglass Products & Swimming Pools for over 30 years


INSTALLATION INSTRUCTIONS –CALIFORNIAN 1.

2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14.

Determine where, within the curtilage of your dwelling, the swimming pool can be accommodated. Investigate whether there are any mains services where the pool is to be positioned (i.e. water, sewerage, land drains, electricity, gas or telephone). Consult your local planning authority to determine planning permission or building regulations approval is required. The Datum level for the excavation is the top edge of the pool. Determine a relationship between the Datum and the existing ground level. Detail ‘A’ is a guide. Excavate carefully, and as close to the installation details as is practical. Note that the excavation is shown square and vertical. However, to reduce dig and fill, site adjustments can allow dig to follow pool contours more closely, retaining a minimum 200mm clearance for surrounding dry sand and cement mix fill. Prepare services (i.e. water and electrics). Use timber pegs to accurately establish the 100mm minimum dry sand and cement mix bed level at four positions within the excavation (A,B,C,D). Use a whacker plate to compact the dry sand and cement mix screed. Lower pool into excavation and check that the top edge is horizontal and at a height required. Adjust dry sand and cement mix bed if necessary. Fill around the pool with dry sand and cement mix in 200mm layers, compacting with a fine and limited water spraying. At the same time start filling the pool to the height of each dry sand and cement mix layer plus 100mm. When dry sand and cement mix fill is complete, leave surrounding ground uncovered for 2/3 months so as to allow for any possible settlement before attempting to pave or finish off. At all times, before emptying the pool, it is essential that you contact Coralcovepools ◄—

600 — ►

◄—

SECTION THROUGH EXCAVATION The 100mm compact dry sand & cement mix bed must be level width ways and not more than 100mm

1680 Points A&B

4 outside pegs establish the finished height of the pool.

1300 — ►

1040

Datum Line is the top of the edge beam on the pool

Do not over dig the excavation. If you do make sure the extra depth is taken up with crushed rock or other suitable hard fill and compact thoroughly.

IMPORTANT: make sure all pegs are left in place so the excavation can be easily checked by Coralcovepools. Outside Peg A

Corner Peg

3150

1680 down to dry sand & cement mix base

Deep End

1680 down dry sand & cement mix base

600

Outside Peg C

LAYOUT OF EXCAVATION Please Note These dimensions are variable depending upon site design decisions detail ‘A’ is typical only. The Datum is constant. Carefully read and comply with installation instructions

Establish 4 corner pegs

1040 down to dry sand & cement mix base

Shallow End

1040 down to dry sand & cement mix base

4000

1300

Corner Peg Corner Peg

5900 Outside Peg B

Outside Peg D

Provide pegs either side of the pool in positions indicated on the layout. String a line from one to the other as shown, and position a peg to depth required at points A, B, C & D making sure they are level with the first one that you put in across length and depth. The first peg you put in indicates the finished height that you want your pool to be at (i.e. may be level with your damp course on the house wall or a point somewhere else.


Manufacturers in fibreglass Products & Swimming Pools for over 30 years


email simon@coralcovepools.com

www.coralcovepools.com

All Our Prices Include VAT Save ££££ Complete with Pool Kits, Prices exclude Delivery.We can arrange the delivery for you, or if you prefer you can collect your pool on a suitable vehicle. The CoralCove range of pools come to you direct from our factory ready plumbed with all the necessary fittings attached, including underwater light, surface skimmer, bottom drain, return jets, swim jets (where applicable) and is complete with all necessary pipework attached, so that when the pool is delivered, it is ready to be lowered into the prepared excavation, (Quotations available for full installation). We will assist with levelling the pool and connection of the pipework to the plant area (this is the area where all the pumps and filters etc will be situated). Included in our DIY package is the benefit of CoralCovePools actually connecting the pumps, filters & heaters.

The Oasis £9995 inc Vat

Oasis Swimming Pool Features: • • • • • • • • • • • •

Two tone shell Non slip surfaces Surface skimmer & bottom drain (floor suction point) Return inlet for the warm filtered water to return to the pool from the filter 3 spa jets on the underwater seat Hydro activated spa seat Circulating pump and sand filter Solar cover and roller Heat exchanger Chemical start up kit Cleaning kit Pipe fittings to connect up to 5m from the pool to the plant

Manufacturers in fibreglass Products & Swimming Pools for over 30 years


OASIS EXCAVATION DETAILS Initial Excavation size 8.1 metres

4.3 metres

In clay areas, deep end to a depth of 1960mm from datum point

Shallow end levels 1060mm In clay from areas,datum shallow end to apoint depth of 1260mm from datum point String line

Screed set out for leveling floor

6.5 metres

3.6 metres

Deep end levels 1760mm from datum point


Side elevation of excavation depths from datum point 8.1 metres excavation

1760mm

Screed floor length 6500mm

200mm sand fill all around End elevation of excavation depths from datum point

Floor width 3.6 metres

Excavation width 4.3 metres

1960mm

1260mm

1060mmm


Manufacturers in fibreglass Products & Swimming Pools for over 30 years


email simon@coralcovepools.com

www.coralcovepools.com

The CoralCove range of pools come to you direct from our factory ready plumbed with all the necessary fittings attached, including underwater light, surface skimmer, bottom drain, return jets, swim jets (where applicable) and is complete with all necessary pipework attached,so that when the pool is delivered, it is ready to be lowered into the prepared excavation, (Quotations available for full installation). We will assist with levelling the pool and connection of the pipework to the plant area (this is the area where all the pumps and filters etc will be situated). Included in our DIY package is the benefit of CoralCovePools actually connecting the pumps, filters & heaters.

All Our Prices Include VAT Save ££££ Complete with Pool Kits, Prices exclude Delivery.We can arrange the delivery for you, or if you prefer you can collect your pool on a suitable vehicle.

The Classic £14995 inc Vat Classic Swimming Pool Pool Information • • • • • • • • • • • • • •

The Classic comes complete with the following:

Non slip surface Surface skimmer and bottom drain (floor suction point) Spa jets and spa seat Two inlets for the warm filtered water to return to the pool Underwater light to pool and transformer Chemical start up kit Cleaning Kit consisting of a vacuum hose, vacuum brush head, tele vac pole, test kit, and leaf net Pipe and fittings to connect up to 5 meters from the pool to the plant Wide Roman End Steps ideal walk in-walk out access and suitable play area Roller Solar cover Pool heater Hydro Activated Spa Seat with Spa Jets Relaxing Lounger Bed for all over-therapeutic massage

Manufacturers in fibreglass Products & Swimming Pools for over 30 years


INSTALLATION INSTRUCTIONS – CLASSIC 1.

2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14.

Determine where, within the curtilage of your dwelling, the swimming pool can be accommodated. Investigate whether there are any mains services where the pool is to be positioned (i.e. water, sewerage, land drains, electricity, gas or telephone). Consult your local planning authority to determine planning permission or building regulations approval is required.. The Datum level for the excavation is the top edge of the pool. Determine a relationship between the Datum and the existing ground level. Detail ‘A’ is a guide. Excavate carefully, and as close to the installation details as is practical. Note that the excavation is shown square and vertical. However, to reduce dig and fill, site adjustments can allow dig to follow pool contours more closely, retaining a minimum 200mm clearance for surrounding dry sand and cement mix fill. Prepare services (i.e. water and electrics). Use timber pegs to accurately establish the 100mm minimum dry sand and cement mix bed level at four positions within the excavation (A,B,C,D). Use a whacker plate to compact the dry sand and cement mix screed. Lower pool into excavation and check that the top edge is horizontal and at a height required. Adjust dry sand and cement mix bed if necessary. Fill around the pool with dry sand and cement mix in 200mm layers, compacting with a fine and limited water spraying. At the same time start filling the pool to the height of each dry sand and cement mix layer plus 100mm. When dry sand and cement mix fill is complete, leave surrounding ground uncovered for 2/3 months so as to allow for any possible settlement before attempting to pave or finish off. At all times, before emptying the pool, it is essential that you contact Coralcovepools 810 — ►

◄—

SECTION THROUGH EXCAVATION The 100mm compact dry sand & cement mix bed must be level width ways and not more than 100mm

Points A&B

1495 — ►

1080

1990

◄—

Datum Line is the top of the edge beam on the pool

Do not over dig the excavation. If you do make sure the extra depth is taken up with crushed rock or other suitable 4 outside pegs establish the finished height of the pool. hard fill and compact thoroughly. IMPORTANT: make sure all pegs are left in place so the excavation can be easily checked by Coralcovepools Corner Peg

Outside Peg A

4900

1990 down to dry sand & cement mix base

Deep End

1990 down to dry sand & cement mix base

Corner Peg

Outside Peg C

LAYOUT OF EXCAVATION Please Note These dimensions are variable depending upon site design decisions detail ‘A’ is typical only. The Datum is constant. Carefully read and comply with installation instructions

810

1080 down to dry sand & cement mix base

Shallow End

1080 down to dry sand & cement mix base

1495

10250 Outside Peg B Provide

Establish 4 corner pegs

Corner Peg Outside Peg D

pegs either side of the pool in positions indicated on the layout. String a line from one to the other as shown, and position a peg to depth required at points A, B, C & D making sure they are level with the first one that you put in across length and depth. The first peg you put in indicates the finished height that you want your pool to be at (i.e. may be level with your damp course on the house wall or a point somewhere else.


Classic

CoralCovepools


email simon@coralcovepools.com

www.coralcovepools.com

All Our Prices Include VAT Save ££££ Complete with Pool Kits, Prices exclude Delivery.We can arrange the delivery for you, or if you prefer you can collect your pool on a suitable vehicle. The CoralCove range of pools come to you direct from our factory ready plumbed with all the necessary fittings attached, including underwater light, surface skimmer, bottom drain, return jets, swim jets (where applicable) and is complete with all necessary pipework attached, so that when the pool is delivered, it is ready to be lowered into the prepared excavation, (Quotations available for full installation). We will assist with levelling the pool and connection of the pipework to the plant area (this is the area where all the pumps and filters etc will be situated). Included in our DIY package is the benefit of CoralCovePools actually connecting the pumps, filters & heaters.

The Atlantis £8995 inc Vat

Atlantis Swimming Pool Pool Information Features: • • • • • • • • • •

Underwater Light Swimjets Filtration Spa Pump Cartridge Filter Spa Blower Solar cover and roller Heat Retention Blanket Start Up Chemicals and Test Kit Spa Jets Heat exchanger

Manufacturers in fibreglass Products & Swimming Pools for over 30 years


INSTALLATION INSTRUCTIONS –ATLANTIS SPA 1. 2. 3. 4. 5.

6. 7. 8. 9. 10. 11. 12. 13. 14.

Determine where, within the curtilage of your dwelling, the swimming pool can be accommodated Investigate whether there are any mains services where the pool is to be positioned (i.e. water, sewerage, land drains, electricity, gas or telephone) Consult your local planning authority to determine planning permission or building regulations approval is required The Datum level for the excavation is the top edge of the pool Determine a relationship between the Datum and the existing ground level. Detail ‘A’ is a guide. Excavate carefully, and as close to the installation details as is practical Note that the excavation is shown square and vertical. However, to reduce dig and fill, site adjustments can allow dig to follow pool contours more closely, retaining a minimum 200mm clearance for surrounding dry sand and cement mix. Prepare services (i.e. water and electrics) Use timber pegs to accurately establish the 100mm minimum dry sand and cement mix bed level at four positions within the excavation (A,B,C,D). Use a whacker plate to compact the dry sand and cement mix screed Lower pool into excavation and check that the top edge is horizontal and at height required. Adjust dry sand and cement mix bed if necessary Fill around the pool with dry sand and cement mix in 200mm layers, compacting with a fine and limited water spraying. At the same time start filling the pool to the height of each dry sand and cement mix layer plus 100mm. When dry sand and cement mix fill is complete, leave surrounding ground uncovered for 2/3 months so as to allow for any possible settlement before attempting to pave or finish off. At all times, before emptying the pool, it is essential that you contact Coralcovepools ◄—

170 — ►

◄—

SECTION THROUGH EXCAVATION

170 — ►

920

1230

Datum Line is the top of the edge beam on the pool

Points A&B The 100mm compact dry sand & cement bed must be level widthways and not more than 100mm

4 outside pegs establish the finished height of the pool.

Do not over dig the excavation. If you do, make sure the extra depth is taken up with crushed rock or other suitable hard fill and compact thoroughly.

IMPORTANT: make sure all pegs are left in place so the excavation can be easily checked by Coralcovepools Outside Peg (A)

3000

1000

Corner Peg

1230 down to dry sand & cement mix base

LAYOUT OF EXCAVATION Please Note These dimensions are variable depending upon site design decisions detail ‘A’ is typical only. The Datum is constant.

1000

Deep End

1000

Outside Peg (C)

1230 down to dry sand & cement mix base

Carefully read and comply with installation instructions

5260

170

Establish 4 corner pegs

920 down to dry sand & cement mix base

Shallow End

920 down to dry sand & cement mix base

170

Corner Peg Outside Peg (B)

Corner Peg

5600

Outside Peg (D)

Provide pegs either side of the pool in positions indicated on the layout. String a line from one to the other as shown, and position a peg to depth required at points A, B, C & D making sure they are level with the first one that you put in across length and depth. The first peg you put in indicates the finished height that you want your pool to be at (i.e. may be level with your damp course on the house wall or a point somewhere else.


email simon@coralcovepools.com

www.coralcovepools.com

The CoralCove range of pools come to you direct from our factory ready plumbed with all the necessary fittings attached, including underwater light, surface skimmer, bottom drain, return jets, swim jets (where applicable) and is complete with all necessary pipework attached,so that when the pool is delivered, it is ready to be lowered into the prepared excavation, (Quotations available for full installation). We will assist with levelling the pool and connection of the pipework to the plant area (this is the area where all the pumps andfilters etc will be situated). Included in our DIY package is the benefit of CoralCovePools actually connecting the pumps, filters & heaters.

All Our Prices Include VAT Save ££££ Complete with Pool Kits, Prices exclude Delivery.We can arrange the delivery for you, or if you prefer you can collect your pool on a suitable vehicle.

The Koolabah £12995 inc Vat

Koolabah Swimming Pool Pool Information • • • • • • • • •

8.5m x 4.4m Depth 1-2m The attractive Koolabah comes complete with the following:

Cleaning kit Chemical start up kit Roller Solar cover Heat exchanger Circulation pump and sand filter Capacity 50,000 litres Spa seat Underwater light

Manufacturers in fibreglass Products & Swimming Pools for over 30 years


INSTALLATION INSTRUCTIONS – KOOLABAH 1. 2.

Determine where, within the curtilage of your dwelling, the swimming pool can be accommodated. Investigate whether there are any mains services where the pool is to be positioned (i.e. water, sewerage,, land drains, electricity, gas or telephone). Consult your local planning authority to determine planning permission or building regulations approval is required. The Datum level for the excavation is the top edge of the pool. Determine a relationship between the Datum and the existing ground level. Detail ‘A’ is a guide. Excavate carefully, and as close to the installation details as is practical. Note that the excavation is shown square and vertical. However, to reduce dig and fill, site adjustments can allow dig to follow pool contours more closely, retaining a minimum 200mm clearance for surrounding dry sand and cement mix fill. Prepare services (i.e. water and electrics). Use a whacker plate to compact dry sand and cement mix screed. Lower pool into excavation and check that the top edge is horizontal and at a height required. Adjust dry sand and cement mix bed if necessary. Fill around the pool with dry sand and cement mix in 200mm layers, compacting with a fine and limited water spraying. At the same time start filling the pool to the height of each dry sand and cement mix layer plus 100mm. When dry sand and cement mix fill is complete, leave surrounding ground uncovered for 2/3 months so as to allow for any possible settlement before attempting to pave or finish off. At all times, before emptying the pool, it is essential that you contact CoralCovePools

3. 4. 5. 6. 7. 8. 9. 10. 11. 12.

970

2010

13.

SECTION THROUGH EXCAVATION The 100mm compact dry sand & cement mix bed must be level width ways and not more than 100mm

Points A&B

Datum Line is the top of the edge beam on the pool

Do not over dig the excavation. If you do make sure the extra depth is taken up with crushed rock or other suitable 4 outside pegs establish the finished height of the pool. hard fill and compact thoroughly. IMPORTANT: make sure all pegs are left in place so the excavation can be easily checked by CoralCovepools Corner Peg

Establish 4 corner pegs

LAYOUT OF EXCAVATION

Deep End

These dimensions are variable depending upon site design decisions detail ‘A’ is typical only. The Datum is constant.

Shallow End

5000

5000

Please Note

Carefully read and comply with installation instructions

Corner Peg

8900

Corner Peg


Completely installed & heated showroom pools

www.coralcovepools.com email Simon@coralcovepools.com

The benefits of purchasing a CoralCove pool are endless. Through innovative design and manufacturing advantages your CoralCove pool is designed to last a lifetime. The pool walls incorporate fibreglass stiffeners, both the steps and edge beam have a strong nonslip surface and the large radius shape of the pool allows for ease when cleaning with an auto cleaner. A special coating of epoxy based vinyl ester resin protects the interior of your pool against osmosis whilst the formulated black waxed resin flowcoat seals the interior. It is total commitment to quality that has made CoralCovepools the leading UK manufacturer of fibreglass swimming pools and swimspas.

POOL CONSTRUCTION Cross section of structure

NON SLIP SURFACE

OUTER EDGE BEAM ANGLE BRACE

FULL DEPTH WALLS

FIBREGLASS WALL STIFFENERS

LARGE RADIUS DESIGNED FOR AUTO CLEANERS

FLOWCOAT TO OUTER STRUCTURES

POOL CONSTRUCTION Wall sample of our fibreglass pools showing matched quality materials. CLOSE BEAM CONSTRUCTION MEANS YOUR POOL IS BUILT USING THE STRONGEST METHOD OF CONSTRUCTION AVAILABLE IN THE INDUSTRY. CHEMICAL RESISTANT AND U.V. STABILISED GEL COAT EPOXY BASED VINYL ESTHER RESIN IMPERVIOUS TO WATER AND PROVIDES GUARANTEED OSMOSIS PROTECTION. TWO STRUCTURAL LAYERS OF FIBREGLASS BUILT TO THE REQUIRED STRUCTURAL THICKNESS. NO FILLERS ADDED. SPECIAL BLACK FLOW COAT SEALS ANY EXPOSED FIBRES


email simon@coralcovepools.com

www.coralcovepools.com

The CoralCove range of pools come to you direct from our factory ready plumbed with all the necessary fittings attached, including underwater light, surface skimmer, bottom drain, return jets, swim jets (where applicable) and is complete with all necessary pipework attached, so that when the pool is delivered, it is ready to be lowered into the prepared excavation, (Quotations available for full installation). We will assist with levelling the pool and connection of the pipework to the plant area (this is the area where all the pumps and filters etc will be situated). Included in our DIY package is the benefit of CoralCovePools actually connecting the pumps, filters & heaters.

All Our Prices Include VAT Save ££££ Complete with Pool Kits, Prices exclude Delivery.We can arrange the delivery for you, or if you prefer you can collect your pool on a suitable vehicle.

The Coral £8995 inc Vat Coral Swimming Pool

The coral is one of the newest additions to our range of swim spas and comes complete with: • • • • • • • • •

Swimjets Chemical Start Up Kit Cleaning Kit Roller Solar Cover Heat Exchanger Circulation pump and sand filter Spa seat Underwater light

The Coral swim spa has a constant depth of 1200mm.

Manufacturers in fibreglass Products & Swimming Pools for over 30 years


Dealing with ground water Whether you find ground water or not it will be necessary to construct a sump at the lowest point of the excavated area into which land drains, positioned beneath the pool, will drain. At any time during the construction an electric submersible pump can be hired to prevent the site from becoming too water logged, the pump can be run continuously and water should be directed well away from the area. The sump can be as simple as a heavy duty bucket perforated at the base and into which a sleeve of 200mm plastic land drain is fitted. This will allow a pup to be lowered into position at any time in the future should it become necessary to drain the pool. Ensure that the sleeve is long enough to reach the surface and base of sump.

THE DUMPY LEVEL, ONCE SET SHOULD NOT BE MOVED. BEGIN EXCAVATING FROM EITHER END, USE MARKER POLE TO GAUGE EXCAVATION DEPTHS BY STRINGING ACROSS THE DEPTH CHECK PEGS. IF YOU OVERDIG REFILL WITH HARDCORE NOT SOIL.

CHECK THE BASE GRADIENT FOR YOU POOL MODEL. SEE DIAGRAM BELOW

LAY 60MM LAND DRAINS TO FEED INTO SUMP.

Take care at this stage to ensure the pool is properly level. When you sit down to relax after a swim it makes all the difference in the world to see that you have made a good job of the installation. The pools are light enough to be manoeuvred accurately into position to align with existing paving or wall.

Position the marker pole on top of the pool coping and use the Dumpy to sight on the Top of Pool Mark, check all the way around the pool to ensure it is absolutely level. It is a good idea to check that the Dumpy hasn’t accidently been knocked or moved by first placing the marker pole on the reference peg, the cross-hairs should intersect the Top of Pool Mark. The flexible coil land drains are not supplied as part of the pool kit and can be obtained through your local builders merchants.

USE THE MARKER POLE AND DUMPY TO CHECK THE COPING LEVEL ALL AROUND THE POOL BY SIGHTING ON THE TOP OF POOL MARK

Reference Peg

IF GROUNDWATER IS ENCOUNTERED, HIRE A SUBMERSIBLE PUMP WHICH CAN BE KEPT RUNNING UNTIL THE INSTALLION IS COMPLETE. THE PUMPS ARE QUIET AND WILL KEEP THE SITE CLEAR OF WATER

FAILURE TO BACK FILL PROPERLY AS PER THE INSTRUCTIONS PROVIDED AND FAILING TO INSTALL ADEQUATE LAND DRAINS MAY CAUSE STRUCTURAL DAMAGE TO YOUR POOL WHICH IS OUTSIDE THE WARRANTY


In choosing a CoralCove pool you are buying over 20 years of experience in the Swimming Pool business. Designed and built to provide a quality product that brings outdoor living within the reach of any family. Best quality resins and fibreglass technology has meant each pool is extremely strong yet light enough to be lifted into position, even over a house if necessary. Combine this ability to reach awkward spaces with factory plumbed fittings and we think you’ll agree owning a swimming pool has never been easier. Take time to understand the stages of installation illustrated here, there is nothing that is beyond the capable DIY’er and where you are uncertain contact Simon at Coralcove for professional help and advice. Being well organised before hand makes any job simpler. Forward planning is the secret of success. Check and identify the plus and minus points early on. The largest part of the job is excavating and removing soil so access for machinery needs to be considered, again Simon will be more than pleased to offer advice. Site the pool to the maximum advantage of sun and shelter, note where the sun falls in your garden throughout the day and pre-plan your pool surroundings. Mark out and align your pool accurately and lift and remove plants and shrubs to a safe place, so that you or the contractor can work unimpeded. • • • • • •

Check position for sun and shelter Position Plant Room for shortest pipe run Plan pool surface surround and patio area Set reference peg to mark datum point (top edge of pool) Fix marker pegs in position and measure diagonals to check square Mark out pool area with white cement

Overhead Cables

Tree Roots

High Water Table

WHEN SELECTING YOUR SITE CHECK FOR UNDERGROUND PIPES AND CABLES, OVERHEAD WIRES, TREE ROOTS AND ROCKS AND HIGH GROUND WATERS


Master Brochure Coralcove Pools