MX-5_8EN7-EA-14E_Edition1 Page256 Friday, March 28 2014 3:40 PM
Black plate (256,1)
Interior Comfort
Audio System NOTE l
l
(Registered ID code input determination)
If an ID code is not input for ten seconds, “Err” is displayed and it returns to the former display. Channel preset buttons 1, 2, 3, 4 and the scan button ( ) are used for input of the ID code. Buttons 5 and 6 cannot be used.
6. Determine the input code by pressing the scan button ( ). 7. If it does not match the registered code, “SR1 Err” is displayed and then it returns to “SR1 - - - -”. 8. If it matches the registered code, “SR1 UNLOCK” appears for three seconds which indicates that the code input has been completed.
Lock cancellation Setting condition: SAT mode (Releasing a locked channel)
9. “SR1 100” appears which indicates that the parental lock is off. At this time, sound is heard.
1. Select a channel to be released by turning the manual tuning dial. Example: Select the locked channel (i.e. 100). At this time, “SR1 LOCK 100” is displayed.
NOTE l
(Registered ID code input preparation) 2. Press and hold the scan button ( then press channel preset button 6. Hold both buttons together for 1.5 seconds.
),
3. “ENTER PIN” appears for three seconds which indicates that it is in code input mode. 4. “SR1 - - - -” appears, which indicates that it is ready for code input. (Registered ID code input) 5. Input the registered ID code using channel preset buttons 1-4. Example: When the registered ID code is “2323”, input “2323”. At this time “SR1 2323” is displayed. NOTE If “Err” is displayed, go to the “INITIALIZATION OF ID CODE” section to reset the ID code to [0000].
6-44
Form No.8EN7-EA-14E
l
If an ID code is not input for ten seconds, “Err” is displayed and it returns to the former display. Channel preset buttons 1, 2, 3, 4 and the ) are used for input of scan button ( the ID code. Buttons 5 and 6 cannot be used.