Pressure Washing Virginia Beach – Steps to Clean Windows Using Pressure Washer

Pressure Washing Virginia Beach – Steps to Clean Windows Using Pressure Washer Residential Pressure Washing in Virginia Beach helps to make a home look attractive again and ready to welcome new guests. But you need to pay attention when it comes to pressure wash the Windows as high pressure may cause damage and you may end up with the extra cost. So, being a Virginia Beach pressure washing company, proper care needs to be taken to make the task finish well. Below mention are the steps that can help you to do the task of Window pressure washing easy: 1. Check Current Condition: As you want to do pressure washing service, check if the window caulking is working fine and the glazing around the panes is intact and is not in loose condition. It’s better to re-caulking or re-glazing if you are planning to do so before performing Virginia Beach pressure washing services.

2. Water Soil: It is a good option to soak the soil beneath each window to help dilute soap chemicals that can later be used to wash the windows.

3. Add Soap Concentrate: Fill the pressure washer reservoir with formulating multi-use soap. Packaging that contains the soap mentions that the soap is safe for siding, windows or sidewalks. It is recommended to install the soap tip to the end of the pressure washing wand. Once activated, the wand will provide a powerful stream of soapy water via soap tip, but at a lower pressure than other tips.

4. Pressure Washer for Soap: After filling the reservoir, the next step is to turn on the pressure washer and initiate the wand. The tip of the wand should be at 45-degree angle to the window and trim. Setting the angle will help to remove the dirt from the trim, windowsill, and glass easily rather than straight blasting. This Virginia Beach pressure washing services will also help to loosen any flaking paint which will help your window ready for a new coat of paint.

5. Rinse Windows: At the last turn off the VA pressure washer and switch off the tip on the wand. A 15-20 degree angle will provide a strong pressure stream to remove soap present on the surface and the dirt loosened the grip due to the soap. It is a good practice to spray from the top of the window to down to completely clean the window. After all cleaning tasks finished, once again check the caulk and glazing are still in good condition and allow the window to air dry before re-paint.

So, by following the above-mentioned pressure washing Virginia Beach steps, you can clean the windows easily and effectively.