FINAL DRIVE 11-7 Drive Belt not twist [A] the drive belt [B] as shown. •○Do This includes coiling the belt to make it smaller for packaging.
not use tools [A] to pry [B] the drive belt [C] onto the • Do application.
○The rear pulley [D] should be in the front position in the swingarm so that the belt can be easily put on by hand.
Drive Belt Wear Inspection
to the Belt Wear Inspection in the Periodic Mainte• Refer nance chapter.
Drive Belt Deflection Inspection
to the Belt Deflection Inspection in the Periodic • Refer Maintenance chapter.
Drive Belt Deflection Adjustment
to the Belt Deflection Adjustment in the Periodic • Refer Maintenance chapter.
Drive Belt Removal
• Remove: Rear Wheel
(see Rear Wheel Removal in the Wheels/Tires chapter) Engine Pulley (see Engine Pulley Removal)
NOTE
○Before removing, observe the direction the belt’s printed information [A] (such as manufacture’s name) is facing so that it may be reinstalled on the pulleys to rotate in the same direction as originally installed.
• Remove the drive belt [B].