JAKI Catalog

Page 1

2 0 1 2 . 0 8


公 司 簡 介 敝公司成立於1993年,迄今十九年。我們從事專業的工業控制已有多年之久,就 緩衝器而言,我們是國內自我製造生產,唯一獲得 CE (歐盟)國際安全認證的公司, 且深受國內上市、上櫃及各國營單位得支持與愛護。 “ 品質、誠信、互利、服務”一直是我們遵守的原則,“生命共同體”為商場上 不可或缺的體認,更是我們堅信的承諾。我們企盼與所有業界的朋友共同成長,讓我 們的觸角共同延伸至全球各地,”國際性的積奇”是我們努力不懈的目標。客戶不僅 是夥伴,更是我們的朋友,”天涯共彼鄰” 是積奇對待客戶的情誼宗旨,讓你我共同 攜手前進遼闊的天空。 Our company is established over nineteen years since 1993, and we are engaged in professional controller’s manufacture, we also get the certification of CE. “Quality, Honest, Mutual Benefit, and Service” are the principle we followed. And we promise to survive with our partners together. We sincerely hope to grow with all friends together, and let’s extend our business to the whole world, and “international Jacky” is the goal we never give up. The clients not only are our partners, but also our friends. Every client in the world is our neighbor, and we hope to extend our business with you together.

目 錄 泵浦型馬達緩衝器SP系列

1

SOFT START PUMP MOTOR CONTROLLER

泵浦馬達專用緩衝器

3

SOFT START PUMP MOTOR CONTROLLER

智慧型馬達啟動控制器OL系列

6

SOFT START MOTOR CONTROLLER

智慧型馬達啟動控制器

8

SOFT START MOTOR CONTROLLER

單相馬達緩衝器

12

SINGLE PHASE SOFT START CONTROLLER

三相S.C.R電力調整器微電腦系列

13

THREE PHASE POWER REGULATOR

三相S.C.R電力調整器

15

THREE PHASE POWER REGULATOR

單相S.C.R電力調整器 SINGLE PHASE POWER REGULATOR

三相固態繼電器 (隨機觸發)

20 22

THREE PHASE SOLID STATE RELAY (RANDOM TURN-ON)

三相固態繼電器 (零點觸發)

23

THREE PHASE SOLID STATE RELAY (ZERO CROSS TURN-ON)

大安培數三相固態繼電器 (80A~180A)

25

THREE PHASE SOLID STATE RELAY

三相馬達正逆轉固態繼電器

26

THREE PHASE MOTOR FWR/REV S.S.R

半導體專用快速保險絲

HIGH SPEED FUSE RESERVED FOR THE USE OF SEMICONDUCTOR

27


泵浦馬達緩衝器 SP系列 SOFT START PUMP MOTOR CONTROLLER

功能特性 可調整啟動時間與扭力,使馬達平順啟動。 採用矽控整流體(SCR)控制:無接點、無弧光、無光端磨損,相當於半永久性的使用壽命。 配線簡便:三進三出的裝置,節省人工繁瑣配線的花費。 本控制器具有三相三線6只SCR閘流體作電力轉換控制。 本緩衝器為微處理機型,並具有自動輕重負載校對功能與轉矩控制。 本控制器具馬達過載、馬達卡死、馬達低載皆可由控制器內部指撥開關設定,並提供復歸鍵,可作手動復歸。 本控制器提供3組輸出接點:啟動時輸出接點、運轉完成後輸出接點(BY PASS)、系統異常輸出接點。 本控制器提供泵浦馬達專用緩慢停止功能,以達到最佳消除水錘功能。 本緩衝啟動器具CE, IEC60947-4-2認證合格之規範。

泵浦型SP系列保護功能 馬達過載

斜率啟動

欠相

定電流啟動

馬達卡死

全壓啟動

閘流體過溫

轉矩啟動

馬達低載(缺水檢知) 1

啟動模式


泵浦馬達緩衝器SP系列 SOFT START PUMP MOTOR CONTROLLER

一 般 特 性

扭 力 、 時 間 參 考 下 圖 解

General Characteristic

Reference drawing of torque and time

主電源電壓 main power voltage 輔助電壓 assistance voltage 啟動方式 start way 工作頻率 work frequency 啟動時間 start time (speed time) 啟動扭力 start torque 停止時間(減速時間) stop time (retard time) 停止模式 儲存溫度 周圍工作溫度 ambient operating temperature rang 最高峰值耐壓 maximum peak voltage 最大相對溼度 relative humidity 高度 height 振動

3Ø 208~220 / 380~480 VAC ± 10% 220V ± 10% ( 可 訂 製 110V ± 10% ) (can be ordered 110V ± 10% ) 乾接點

dry contact point 50~60Hz ± 5% START TORQUE

1~40 sec. 100%~500% 1~60 sec. 慣性停止/轉矩停止/斜率停止

-20°C~70°C -10°C~45°C

START TIME

600VAC或1200VAC~1600VAC 93% RH 無凝結成水滴

93% RH without dew 標高2000公尺以下

below is under 2000 metres 0.5G以 下 STOP TIME

控 制 方 式

1

2

AC1 AC2

3

4

5

7

RUNNING

NO COM NC

NO, COM, NC:異常訊號輸出接點240V / 5A

4A 7A 10A 15A 22A 28A

10

11

12 START / STOP

BY PASS (RUN)

BY PASS (RUN):運轉完成後輸出接點 START/STOP:啟動/停止控制接點

Choice of Specification & Models

額定電壓 Rated voltage

額定電流 Rated current

9

RUNNING:運轉中輸出接點 240V / 5A

AC1, AC2:輔助電壓 220V±10% (可訂製110V±10%)

泵浦型馬達緩衝器SP系列 產 品 規 格 選 擇

8

208 -220V A C SM C9 2 0 0 2 0 -S P SM C9 2 0 0 3 0 -S P SM C9 2 0 0 5 0 -S P SM C9 2 0 0 7 5 -S P SM C9 2 0 1 0 0 -S P

HP

3 8 0 -4 8 0 V A C

HP

2 3 5 7.5 10

SMC9 3 0 0 2 0 -S P SMC9 3 0 0 3 0 -S P SMC9 3 0 0 5 0 -S P SMC9 3 0 0 7 5 -S P SMC9 3 0 1 0 0 -S P SMC9 3 0 1 5 0 -S P

2 3 5 7.5 10 15

L

W

mm

mm

高 H

mm

(圖一) 圖 (一)

145

83

120 圖 (二)

上述資料若有變更,恕不另行通知,敬請見諒! A l l s p e c i f i c a t i o n s c a n b e m o d i f i e d .

(圖二) 2


泵浦馬達專用緩衝器 SOFT START PUMP MOTOR CONTROLLER

功 能 簡 介 Function Introduction 啟動時可依不同負載來調整啟動扭力與時間,使啟動平順圓滑。 同一機台可選擇3種啟動模式:斜率啟動、限電流啟動、限電流加踢動啟動《KICK START》。 採用矽控整流體(SCR)控制:無接點、無弧光、無光端磨損,相當於半永久性的使用壽命。 配線簡便:三進三出的裝置,節省人工繁瑣配線的花費。 本控制器具有三相三線6只SCR矽控閘流體作電力轉換控制。 本緩衝器為微處理機型,並具有自動輕重負載校對功能與轉矩控制。 冷卻風扇動作具有溫度控制,當散熱片溫度55℃時工作,45℃時停止,可提高風扇壽命2~3倍。 本控制器內含CT電子式檢知保護器:具過載、欠相、馬達卡死、閘流體過溫、馬達低載(缺水)的保護, 超靈敏感度,無積熱效應,不受週溫影響。 本控制器提供3組輸出接點:具啟動時輸出接點、運轉完成後輸出接點(BY PASS)、系統異常輸出接點,可供遠端監控使用。 本控制器提供泵浦馬達專用緩慢停止功能,以達到最佳消除水錘功能。 本緩衝啟動器具CE,EN60947-4-2,IEC60947-4-1,EN61000-4,EN50082-2,EN50081之認證。

Starting torque and time can be adjusted according to the different load when starting, and make starting smoothly and stably. 3 starting ways can be choice in one machine:the slope starting, current-limiting starting, kick starting. Use SCR control: without connecting points, arc light, smooth face wearing, or use-life forever similarly. Wiring easy: installation of 3 in 3 out, save the coast of hand wiring. This controller has phases and 3 wires' SCR to transform control of power. This controller is micro-controller with the function of automatic ligh/heavy loading revision and turning moment control. Cooling fans has temperature control, the cooling sheet working at 55°C, and stop at 45°C, this design can extend use-life of fans 2-3 times. This controller has CT electronic inspection protector: the standard series have the protection of overload, loss phase, motor block, over heating, motor running idling(Low load), high sensitivity, without heating effect, not influenced by the temperature around.

The machine has 3 sets' output connection points: the standard series have the output point when starting, by pass, and output point for system abnormal, for distant end supervising and controlling. This machine has slow stop function for pump motor to create best water hammer removing funciton. The starter starting tool has passed CE,EN60947-4-2,IEC60947-4-1,EN61000-4,EN50082-2,EN50081 accreditation.

控 制 方 式

AC1,AC2:控制電壓 220VAC±10% OPEN:空腳備用 NO,COM,NC:異常訊號輸出接點 240V/5A

RUNNING:運轉中輸出接點 240V / 5A BY PASS(RUN):運轉完成後輸出接點 START/STOP:啟動/停止控制接點 輸入/輸出接點均為乾接點信號

3


泵浦馬達專用緩衝器 SOFT START PUMP MOTOR CONTROLLER 扭 力 、 時 間 參 考 下 圖 解

一 般 特 性

General Characteristic 主電源電壓 main power voltage 輔助電壓 assistance voltage 啟動方式 start way 工作頻率 work frequency

Reference drawing of torque and time

208~220V/380~440V/460~480V±10% 220V ± 10%

( 可 訂 製 110V ± 10% )

(can be ordered 110V ± 10% ) 乾接點

dry contact point 50~60Hz ± 5%

最高峰值耐壓 maximum peak voltage

600VAC或1200VAC~1600VAC

啟動時間(加速時間) start time (speed time)

1~40sec.

啟動扭力 start torque 停止時間(減速時間) stop time (retard time) 周圍工作溫度 ambient operating temperature rang 最大相對溼度 relative humidity 高度 height 絕緣阻抗 insulation resistance

100%~500% 1~60 sec. -10°C~45°C 93%無凝結成水滴 93% RH without dew 標高2000公尺以下 below is under 2000 metres 20MΩ以上 (電源與外殼間) Over 20MΩ (power & extemal cover) 20MΩ以上 (輸入信號與外殼間) Over 20MΩ (input signal & extemal cover)

耐壓強度 strength of press-resisted

電源與外殼間 2500VAC/1分鐘 2500VAC/1min between power & external cover 電源與輸入信號 1000VAC/1分鐘 1000VAC/1min between input signal & external cover

SOFT PUMP

與 各 式 啟 動、 停 止 流 量 比 較 圖

Diagram of SOFT PUMP Starting and Stopping 流

慣性停止

直接啟動

量 緩衝啟動

緩衝停止 直接啟動/慣性停止

降壓啟動 降壓啟動/慣性停止 (啟動區)

(運轉區)

時間 (秒) 4

(緩慢停止區) 緩衝啟動/緩衝停止


泵浦馬達專用緩衝器 SOFT START PUMP MOTOR CONTROLLER 標準型系列 型號規格選擇 額定電壓 rated voltage

額定電流 rated current

208-220VAC

HP

7A

額定電流

額定電壓 rated voltage

380-440VAC

HP

rated current

460-480VAC

HP

SMC930030-P

3HP

7A

SMC940050-P

5HP

5HP

10A

圖 P

210 142 154

1

SMC940075-P

7.5HP 210 142 154

1

10A

SMC920030-P

3HP

SMC930050-P

15A

SMC920050-P

5HP

SMC930075-P 7.5HP

15A

SMC940100-P

10HP 210 142 154

1

22A

SMC920075-P 7.5HP SMC930100-P 10HP

22A

SMC940150-P

15HP 210 142 154

1

28A

SMC920100-P

210 142 154

1

10HP SMC930150-P 15HP

35A

SMC930200-P 20HP

28A

SMC940200-P

20HP 233 142 154

2

42A

SMC920150-P

15HP SMC930250-P 25HP

35A

SMC940250-P

25HP 233 142 154

2

55A

SMC920200-P

20HP SMC930300-P 30HP

42A

SMC940300-P

30HP 233 142 154

2

70A

SMC920250-P

25HP SMC930400-P 40HP

55A

SMC940400-P

40HP 285 142 154

3

82A

SMC920300-P

30HP SMC930500-P 50HP

70A

SMC940500-P

50HP 285 142 154

3

105A

SMC920400-P

40HP SMC930600-P 60HP

82A

SMC940600-P

60HP 285 142 154

3

135A

SMC920500-P

50HP SMC930750-P 75HP

105A

SMC940750-P

75HP 320 142 200

4

155A

SMC920600-P

60HP SMC931000-P 100HP

135A

SMC941000-P

100HP 320 142 200

4

185A

SMC920750-P

75HP SMC931250-P 125HP

155A

SMC941250-P

125HP 400 263 210

5

250A

SMC921000-P 100HP SMC931500-P 150HP

185A

SMC941500-P

150HP 400 263 210

5

280A

SMC931750-P 175HP

250A

SMC941750-P

175HP 400 263 210

5

300A

SMC921250-P 125HP SMC932000-P 200HP

280A

SMC942000-P

200HP 530 306 247

6

360A

SMC921500-P 150HP SMC932500-P 250HP

300A

SMC942500-P

250HP 530 306 247

6

420A

SMC921750-P 175HP SMC933000-P 300HP

360A

SMC943000-P

300HP 530 306 247

6

420A

SMC943500-P

350HP 530 306 247

6

500A

SMC920500A-P

SMC930500A-P

500A

SMC940500A-P

655 365 285

7

560A

SMC920560A-P

SMC930560A-P

560A

SMC940560A-P

660 573 308

8

620A

SMC920620A-P

SMC930620A-P

620A

SMC940620A-P

660 573 308

8

750A

SMC920750A-P

SMC930750A-P

750A

SMC940750A-P

660 573 308

8

930A

SMC920930A-P

SMC930930A-P

930A

SMC940930A-P

675 573 308

8

1100A

SMC921100A-P

SMC931100A-P

1100A SMC941100A-P

675 573 308

8

上述資料若有變更,恕不另行通知,敬請見諒! A l l s p e c i f i c a t i o n s c a n b e m o d i f i e d .

※ 本 公 司 緩 衝 器 之 額定電流值以東元馬達之 4 極馬達之電流值做為依據,若超載使用,屬非保固範圍。

(圖一)

(圖二)

(圖五)

(圖三)

(圖六)

(圖四)

(圖七)

(圖八)

5


智慧型馬達緩衝器OL系列 SOFT START MOTOR CONTROLLER

功能特性 可調整啟動時間與扭力,使馬達平順啟動。 採用矽控整流體(SCR)控制:無接點、無弧光、無光端磨損,相當於半永久性的使用壽命。 配線簡便:三進三出的裝置,節省人工繁瑣配線的花費。 本控制器具有三相三線6只SCR閘流體作電力轉換控制。 本緩衝器為微處理機型,並具有自動輕重負載校對功能與轉矩控制。 本控制器具馬達過載、馬達卡死皆可由控制器內部指撥開關設定,並提供復歸鍵,可作手動復歸。 本控制器提供3組輸出接點:啟動時輸出接點、運轉完成後輸出接點(BY PASS)、系統異常輸出接點。 本緩衝啟動器具CE, IEC60947-4-2認證合格之規範。

智慧型OL系列保護功能

6

啟動模式

馬達過載

斜率啟動

欠相

定電流啟動

馬達卡死

全壓啟動

閘流體過溫

轉矩啟動


智慧型馬達緩衝器OL系列 SOFT START MOTOR CONTROLLER

一 般 特 性

扭 力 、 時 間 參 考 下 圖 解

General Characteristic

Reference drawing of torque and time

主電源電壓 main power voltage 輔助電壓 assistance voltage 啟動方式 start way 工作頻率 work frequency 啟動時間 start time (speed time) 啟動扭力 start torque 停止模式 儲存溫度 周圍工作溫度 ambient operating temperature rang 最大相對溼度 relative humidity 高度 height 振動

3Ø 208~220 / 380~480VAC±10% 220V ± 10% ( 可 訂 製 110V ± 10% ) (can be ordered 110V ± 10% ) 乾接點

dry contact point 50~60Hz ±5% 1~40 sec.

START TORQUE

100%~500% 慣性停止/轉矩停止/斜率停止

-20℃~70℃ -10℃~45℃ 93% RH 無凝結成水滴

93% RH without dew

START TIME

標高2000公尺以下

below is under 2000 metres 0.5G 以下

控 制 方 式

1

2

AC1 AC2

3

4

5

7

RUNNING

NO COM NC

NO, COM, NC:異常訊號輸出接點240V / 5A

4A 7A 10A 15A 22A 28A

10

11

12 START / STOP

BY PASS (RUN)

BY PASS (RUN):運轉完成後輸出接點 START/STOP:啟動/停止控制接點

Choice of Specification & Models

(無STOP TIME功能)

額定電壓 Rated voltage

額定電流 Rated current

9

RUNNING:運轉中輸出接點 240V / 5A

AC1, AC2:輔助電壓 220V±10% (可訂製110V±10%)

智慧型馬達緩衝器OL系列 產 品 規 格 選 擇

8

208-220V A C

HP

38 0 -4 8 0 V A C

HP

S M C9 3 0 0 2 0 -O L

2

SM C9 2 0 0 2 0 -OL SM C9 2 0 0 3 0 -OL

2

S M C9 3 0 0 3 0 -O L

3

3

S M C9 3 0 0 5 0 -O L

5

SM C9 2 0 0 5 0 -OL

5

S M C9 3 0 0 7 5 -O L

7.5

SM C9 2 0 0 7 5 -OL SM C9 2 0 1 0 0 -OL

7.5

S M C9 3 0 1 0 0 -O L

10

10

S M C9 3 0 1 5 0 -O L

15

L

W

mm

mm

高 H

mm

(圖一) 圖 (一)

145

83

120 圖 (二) (圖二)

上述資料若有變更,恕不另行通知,敬請見諒! A l l s p e c i f i c a t i o n s c a n b e m o d i f i e d .

7


智慧型馬達啟動控制器 SOFT START MOTOR CONTROLLER

功 能 簡 介 Function Introduction 啟動時可依不同負載來調整啟動扭力與時間,使啟動平順圓滑。 降壓啟動方式的最佳選擇:效果優於Y-△啟動,電抗啟動及自藕變壓啟動。 同一機台可選擇3種啟動模式:標準型系列具斜率式啟動、限電流式啟動、限電流加踢動啟動《KICK START》。 本控制器提供3組輸出接點:標準型系列具啟動時輸出接點、運轉完成後輸出接點(BY PASS)、系統異常輸出接點, 可供遠端監控使用。 採降壓啟動方式,可降低馬達啟動瞬間電流,減少工廠內部電壓降低,避免工廠系統當機。 本控制器內含CT電子式檢知保護器:標準型系列具過載、欠相、馬達卡死、控制器過溫保護,超靈敏感度,且無 積熱效應,不受週溫影響。 配線簡便:三進三出的裝置,節省人工繁瑣配線的花費。 冷卻風扇動作具有溫度控制,當散熱片溫度55℃時工作,45℃時停止,可提高風扇壽命2~3倍。 採用矽控整流體(SCR)控制:無接點、無弧光、無光端磨損,相當於半永久性的使用壽命。 耐粉塵、耐潮,可適用於ON-OFF頻繁及怕火花產生的場所,工安有保障。 本控制器為微處理機型具CE,IEC60947-4-1,EN61000-4,EN50082-2,EN50081之認證。 Starting torque and time can be adjusted according to the different load when starting, and make starting smoothly and stably. Best choice of pressure down's starting: the effect is better than Y-Δstarting, reactance starting and self-coupling transforming starting. 3 starting ways can be choice in one machine: the standard series have the slope starting, current-limiting starting, currentlimiting & kick starting. The machine has 3 sets’ output connection points: the standard series have the output point when starting, by pass, and output point for system abnormal, for distant end supervising and controlling. Current-limiting starting can lower the momentary current of motor starting, to reduce the internal voltage of factory, and this can avoid factory system short down. This controller has CT electronic inspection protector: the standard series have the protection of overload, loss phase, motor block, over heating high sensitivity, without heating effect, not influenced by the temperature around. Wiring easy: installation of 3 in 3 out, save the cost of hand wiring. Cooling fans has temperature control, the cooling sheet working at 55°C, and stop at 45°C, this design can extend use-life of fans 2-3 times. Use SCR control: without connecting points, arc light, smooth face wearing, or use-life forever similarly. Powder-dust proof, moisture proof, suitable to ON-OFF frequently and the place can’t have spark, the factory security can be ensured. This controller is micro-treating model, and it has passed CE,IEC60947-4-1,EN61000-4,EN50082-2,EN50081 accreditation.

8


智慧型馬達啟動控制器 SOFT START MOTOR CONTROLLER

一 般 特 性

扭 力 、 時 間 參 考 下 圖 解

General Characteristic

Reference drawing of torque and time

主電源電壓 main power voltage 輔助電壓 assistance voltage 啟動方式 start way 工作頻率 work frequency

208~220V/380~440V/460~480V±10% 220V ± 10%

( 可 訂 製 110V ± 10% )

(can be ordered 110V ± 10% ) 乾接點

dry contact point

50~60Hz ± 5%

最高峰值耐壓 maximum peak voltage

600V或1200V~1600V

啟動時間 start time (speed time)

1~40sec.

啟動扭力 start torque

100%~500%

周圍工作溫度 ambient operating temperature rang

-10°C~45°C

最大相對溼度 relative humidity 高度 height 絕緣阻抗 insulation resistance

93%無凝結成水滴 93% RH without dew 標高2000公尺以下 below is under 2000 metres 20MΩ以上 (電源與外殼間) Over 20MΩ (power & extemal cover) 20MΩ以上 (輸入信號與外殼間) Over 20MΩ (input signal & extemal cover)

耐壓強度 strength of press-resisted

電源與外殼間 2500VAC/1分鐘 2500VAC/1min between power & external cover 電源與輸入信號 1000VAC/1分鐘 1000VAC/1min between input signal & external cover

適 用 範 圍

Suitable range 需要平滑啟動機能,但不需作速度控制的 產業機械。諸如天車、壓縮機、風車、鼓 風機...等等。 The machine need starting smoothly, but no need speed control, e.g.: hoist, compressor, wíndmill, blower, etc.

控 制 方 式

AC1,AC2:控制電壓 220VAC±10% OPEN:空腳備用 NO,COM,NC:異常訊號輸出接點 240V/5A

RUNNING:運轉中輸出接點 240V / 5A BY PASS(RUN):運轉完成後輸出接點 START/STOP:啟動/停止控制接點 輸入/輸出接點均為乾接點信號

9


智慧型馬達啟動控制器 SOFT START MOTOR CONTROLLER

標準型系列 SMC STANDARD SERIES 型號規格選擇 Choice of Specification & Models 額定電流

額定電壓 rated voltage

額定電流

rated current

208-220VAC

HP

380-440VAC

HP

28A

SMC920100

10HP

SMC930150

15HP

SMC930200

20HP

28A

SMC940200

35A

rated current

額定電壓 rated voltage 460-480VAC

HP

圖 P

210 142 154

1

20HP

233 142 154

2

42A

SMC920150

15HP

SMC930250

25HP

35A

SMC940250

25HP

233 142 154

2

55A

SMC920200

20HP

SMC930300

30HP

42A

SMC940300

30HP

233 142 154

2

70A

SMC920250

25HP

SMC930400

40HP

55A

SMC940400

40HP

285 142 154

3

82A

SMC920300

30HP

SMC930500

50HP

70A

SMC940500

50HP

285 142 154

3

105A

SMC920400

40HP

SMC930600

60HP

82A

SMC940600

60HP

285 142 154

3

135A

SMC920500

50HP

SMC930750

75HP

105A

SMC940750

75HP

320 142 200

4

155A

SMC920600

60HP

SMC931000

100HP

135A

SMC941000

100HP 320 142 200

4

185A

SMC920750

75HP

SMC931250

125HP

155A

SMC941250

125HP 400 263 210

5

250A

SMC921000

100HP

SMC931500

150HP

185A

SMC941500

150HP 400 263 210

5

SMC931750

175HP

250A

SMC941750

175HP 400 263 210

5

280A 300A

SMC921250

125HP

SMC932000

200HP

280A

SMC942000

200HP 530 306 247

6

360A

SMC921500

150HP

SMC932500

250HP

300A

SMC942500

250HP 530 306 247

6

420A

SMC921750

175HP

SMC933000

300HP

360A

SMC943000

300HP 530 306 247

6

420A

SMC943500

350HP 530 306 247

6

500A

SMC920500A

SMC930500A

500A

SMC940500A

655 365 285

7

560A

SMC920560A

SMC930560A

560A

SMC940560A

660 573 308

8

620A

SMC920620A

SMC930620A

620A

SMC940620A

660 573 308

8

750A

SMC920750A

SMC930750A

750A

SMC940750A

660 573 308

8

930A

SMC920930A

SMC930930A

930A

SMC940930A

675 573 308

8

1100A

SMC921100A

SMC931100A

1100A

SMC941100A

675 573 308

8

上述資料若有變更,恕不另行通知,敬請見諒! A l l s p e c i f i c a t i o n s c a n b e m o d i f i e d .

(圖一)

(圖二)

(圖五) 10

(圖三)

(圖六)

(圖四)

(圖七)

(圖八)


智慧型馬達啟動控制器 SOFT START MOTOR CONTROLLER

經濟型系列

SMC ECONMIC SERIES

型 號 規 格 選 擇 Choice of Specification & Models 《無保護系統》 Without protection system

額 定 電 壓 rated voltage

額定電流

寬 長 高 圖 W L H (P) (mm) (mm) (mm)

rated current

208-220VAC

HP

380-440VAC

HP

460-480VAC

HP

7A

SMC920020

2HP

SMC930030

3HP

SMC940050

5HP

75 127

86

1

10A

SMC920030

3HP

SMC930050

5HP

SMC940075

7.5HP

75 127

86

1

15A

SMC920050

5HP

SMC930075

7.5HP

SMC940100

10HP

120 127

86

2

22A

SMC920075

7.5HP

SMC930100

10HP

SMC940150

15HP

180 127

86

3

上述資料若有變更,恕不另行通知,敬請見諒! A l l s p e c i f i c a t i o n s c a n b e m o d i f i e d .

(圖一)

(圖二)

(圖三)

圖(一)

控 制 方 式

圖(二)

(自給電源方式)

使用機種:

(本機出廠時已將1.3腳直接短路) 規格選擇注意事項:

The choice of Specification :

※智慧型緩衝器搭配方式:負載之馬力數及額 定電流須在緩衝器涵蓋範圍內。

※Coordination with smart softer : the horsepower and rated current Ioaded must be in the coverage of softer.

※風車、攪拌機、空壓機、鼓風機、粉碎機、 輸送機、油壓式工業貨梯、複捲機、萬馬力 機、斗升機等產業機械或一小時內啟動次數 超過十二次者需升一級使用。

※The level must be upgraded one level to industrial machinery as windmill, mixer, air compressor. blower, grinder, conveyor, hydraulic industrial freight elevator, rewinder, million horsepower machine, bucket elevator, or the machine need to start over 12 times every hour.

※球磨機需升二級使用。

※To ball mill, must upgrade 2 levels.

11


單相馬達緩衝器 產 品 特 性

Product Characteristic 本產品具CE國際安全之認證。 啟動時可依不同負載來調整啟動扭力與時間,使啟動平順圓滑。 採用矽控整流體(SCR)控制:無接點、無弧光、無光端磨損,相當於半永久性的使用壽命。 耐粉塵、耐潮,可適用於ON-OFF頻繁及怕火花產生的場所,工安有保障。 應用於單相泵浦馬達及單相感應式馬達,可以有效消除水錘問題。 This controller is passed CE international quality accreditation. Starting torque and time can be adjusted according to the different load when starting, and make starting smoothly and stably. Use SCR control:without connecting points, arc light smooth face wearingm, or sue-life forever similarly. Powder-dust proof, moisture proof, suitable to ON-OFF frequently and the place can't have spark, thg factory security can be ensured. Single phase pump motor and single phase motor can best water hammer removing function.

單相馬達 緩 衝 器

單相馬達

適 用 負 載 應用於單相泵浦馬達可以有效消除水錘問題。 適用於單相感應式馬達須啟動平順之場所,如電動鐵門.....。

一 般 特 性

General Characteristic 主電源 main voltage 工作頻率 work frequency 輸入控制訊號 input control signal 使用環境 environment 高度 height

AC110V, 220V 47-63 Hz 乾接點輸入

dry contact point 周溫-10~50℃ 溼度90RH %以下 Around temperature -10ºC~50ºC, humidity under 90% RH. 標高2000公尺以下

below is under 2000 metres

型 號 規 格 選 擇 額定電壓

110V JK1110HP JK1120HP JK1130HP

Choice of Specification & Models

Rated voltage 220V JK2210HP JK2220HP JK2230HP

HP 1HP 2HP 3HP

75 75 75

122 122 122

86 86 86

1 1 1

上述資料若有變更,恕不另行通知,敬請見諒! A l l s p e c i f i c a t i o n s c a n b e m o d i f i e d .

(圖一) 12


三相SCR電力調整器微電腦系列 THREE PHASE POWER REGULATOR

產 品 特 性

Product Characteristic 本控制器具有CE國際安全之認證。 具有R.S.T各相保險絲斷路指示燈,並提供異常輸出接點,可做系統緊急控制之用。 體積精巧、散熱佳,內含半導體專用快速保險絲,不怕負載短路。 冷卻風扇動作具有溫度控制,當散熱片溫度55℃時工作,45℃時停止,可提高風扇壽命2~3倍。 本控制器之保護裝置:來源電欠相、保險絲斷線檢知及本控制器超溫等保護,並具異常輸出接點,可供遠端監控使用, 接點容量250VAC/3A。 緩啟動時間可調整(0~16秒),應用於需要緩啟動的負載,讓負載部會瞬間全壓輸出。(相位輸出) 保險絲過溫警示燈,線性電壓輸出。 半導體專用快速保險絲具有本體過溫故障前預先警示燈。 This controller is passed CE international quality accreditation. It has R.S.T one phases fuse wire broken direction light, and offer a output point for abnormal condition, also can be emergency control for the system. Small size, good cooling and it has speed fuse wire for semi-conductor use, so don’t worry short circuit caused by overload. Cooling fans has temperature control, the cooling sheet working at 55°C and stop at 45°C, this design can extend use-life of fans 2~3 times. The protection equipment: checking and finding of phase failure of power, fuse broke of this controller, and unusual output point for cooling fin overheat of this controller, for destant end supervising and controlling, capacity: 250VAC / 3A. Soft start time adjustable (0~16 second), application to need soft starts of load, let the load end not output all voltage in the twinkling of an eye. (angle phase) The fuse will have warning lights if the fuse over temperature, linear output voltage. Device in the overheat before broken high speed fuse. The error led will light up.

13


三相SCR電力調整器微電腦系列 THREE PHASE POWER REGULATOR

一 般 特 性

General Characteristic 主電源電壓 main power voltage 控制電源電壓 Auxiliary voltage 額定電流 Rated current 工作頻率 work frequency 輸出範圍 Output voltage range 輸出方式 Output type 相位輸入控制訊號 Angle phase input signal 相位輸入控制訊號 Angle phase input signal 絕緣阻抗 Insulation resistance 耐壓強度 Strength of press-resisted

208~480VAC±10% 220V ± 10% ( 提 供 110VAC 選 擇 , 請 事 先 告 知 ) (Offer 110VAC to choose, need to tell to the sales) 20A 33A 48A 65A 自 動 判 斷 50 / 60Hz

Auto 50 / 60Hz

0~100% 向 位 輸 出 ( 緩 啟 動 時 間 可 調 整 0~16秒 ) 、 分 配 零 位 輸 出 、 線 性 電 壓 輸 出 ( 可 訂 製 )

Angle phase.(Soft start time adjustable 0~16 second.) Zero Crossing, Linear output voltage.(Can be orderod.)

4~20mA, 0~5V, 1~5V, 1~10V, 2~10V -10℃~50℃濕度90%RH以下 -10℃~50℃ Humidity under 90%RH. 20MΩ以上(電源與外殼間)、20MΩ以上(輸入訊號與外殼間) Over 20MΩ(power & external cover), Over20MΩ(input signal & external cover) 電源與外殼間2500VAC/1分鐘、輸入訊號與外殼間1000VAC/1分鐘 2500VAC/1mm between power & external cover, 1000VAC/1mm between input signal & external cover

三相SCR電力調整器微電腦系列 產 品 規 格 選 擇 Choice of Specification & Models

輸出方式 Rated current

相位輸出 Angle phase

分配式零位輸出 Zero Crossing

線性電壓輸出 Linear output voltage

輔助電源

主電源

Auxiliary voltage Main power voltage

220VAC

220VAC

220VAC

208~480VAC

208~480VAC

208~480VAC

額定電流

型號

Rated current

Model

L(mm)

W(mm)

H(mm)

20A

JK3PS-48020

165

95

136

33A

JK3PS-48033

165

95

136

48A

JK3PS-48048

165

95

136

65A

JK3PS-48065

183

95

136

20A

JK3PSZ-48020

165

95

136

33A

JK3PSZ-48033

165

95

136

48A

JK3PSZ-48048

165

95

136

65A

JK3PSZ-48065

183

95

136

可訂製 Can be ordered.

上述資料若有變更,恕不另行通知,敬請見諒! A l l s p e c i f i c a t i o n s c a n b e m o d i f i e d .

14


三相SCR電力調整器 THREE PHASE POWER REGULATOR 產 品 特 性

Product Characteristic 本控制器具有CE,EN61000-4-2、EN61000-4-4、EN61000-4-8、EN61000-4-6 ,Low Voltage Directive:73/23EEC,國際安全之認證。 具有R.S.T各相保險絲斷路指示燈,並提供異常輸出接點,可做系統緊急控制之用。 體積精巧、散熱佳,內含半導體專用快速保險絲,不怕負載短路。 冷卻風扇動作具有溫度控制,當散熱片溫度55℃時工作,45℃時停止,可提高風扇壽命2~3倍。 本控制器之保護裝置:來源電欠相、保險絲斷線檢知及本控制器超溫等保護,並具異常輸出接點, 可供遠端監控使用,接點容量240VAC/5A。 內含半導體專用快速保險絲,不怕負載短路,具有保險絲R、S、T斷線檢知功能,每相都具有燈號顯示, 提供快速明確維修情況。 This controller is passed CE international quality accreditation. It has R.S.T. one phases’ fuse wire broken direction light, and offer a output point for abnormal condition, also can be emergency control for the system. Small size, good cooling and it has speed fuse wire for semi-conductor use, so, don't worry short circuit caused by overload. Cooling fans has temperature control, the cooling sheet working at 55ºC, and stop at 45ºC, this design can extend use-life of fans 2-3 times. The protection equipment: checking and finding of phase failure of power, fuse broke of this controller, and unusual output point for cooling fin overheat of this controller, for distant end supervising and controlling, capacity: 240 VAC/5A. It has speed fuse wire for semi-conductor use, so, don’t worry short circuit caused by overload. It has R.S.T one phases’ fuse wire break and examine and know the function, every phase with signal light offers the fast fix situation clearly of speed of skill.

一 般 特 性

General Characteristic 主電源電壓 main power voltage 補助電壓 assistance voltage 額定電流 rated current 工作頻率 work frequency 輸出方式 output type 相位輸入控制訊號 phase input control signal 零位輸入控制訊號 zero input control signal 輸出電壓範圍 output voltage range 使用環境 use environment 絕緣阻抗 insulation resistance

AC220V 380V 440V 480V ± 10% AC220V ± 10% 50/60Hz 25A 35A 50A 60A 80A 100A 125A 160A 180A 200A 225A 250A 300A 350A 400A 600A 750A

50 / 60Hz 相位輸出,零位輸出,線性電壓輸出(L.V.型)

Phase angel, Zero crossing, Liner voltage output 4-20mA, 0-5V,1-5V, 0-10V, 2-10V, 8秒緩衝 手動/自動 Relay切換 4-20mA, 0-5V, 1-5V, 0-10V, 2-10V, 8’s Soft Start Manuall Auto Relay changed 4-20mA, 1-5V, 0-10V, 2-10V 手動/自動 Relay切換 4-20mA, 1-5V, 0-10V, 2-10V Manual / Auto Relay changed 0~100% -10℃~50℃ 溼度 90%RH以下 Humidity Under 90% RH 20MΩ 以上(電源與外殼間) Over 20MΩ (power & external cover) 20MΩ 以上(輸入信號與外殼間) Over 20MΩ (input signal & external cover)

耐壓強度 strength of press-resisted

電源與外殼間 2500VAC/1分鐘 2500VAC/1min between power & external cover 電源與輸入信號 1000VAC/1分鐘 1000VAC/1min between power & input signal 15


三相SCR電力調整器 THREE PHASE POWER REGULATOR 型 號 規 格 選 擇 Choice of Specification & Models 《3 相 3 線 相 位 控 制 ( 3 Φ 3 W ) 》 補助電壓

assistance voltage

主電源電壓

main power voltage

額定電流

Rated current 25A 35A 50A 60A 80A 100A 125A 160A 180A 200A 225A 250A 300A 350A 400A 600A 750A 25A 35A 50A 60A 80A 100A 125A 160A 180A 200A 225A 250A 300A 350A 400A 600A 750A

(圖一) 220V

208V~240V

220V

380V~480V

(圖二)

(圖三)

型號

model

JK3PS-22025 JK3PS-22035 JK3PS-22050 JK3PS-22060 JK3PS-22080 JK3PS-22100 JK3PS-22125 JK3PS-22160 JK3PS-22180 JK3PS-22200 JK3PS-22225 JK3PS-22250 JK3PS-22300 JK3PS-22350 JK3PS-22400 JK3PS-22600 JK3PS-22750 JK3PS-48025 JK3PS-48035 JK3PS-48050 JK3PS-48060 JK3PS-48080 JK3PS-48100 JK3PS-48125 JK3PS-48160 JK3PS-48180 JK3PS-48200 JK3PS-48225 JK3PS-48250 JK3PS-48300 JK3PS-48350 JK3PS-48400 JK3PS-48600 JK3PS-48750

220 220 243 243 243 243 305 305 365 365 400 400 400 530 530 710 710 220 220 243 243 243 243 305 305 365 365 400 400 400 530 530 710 710

142 142 142 142 142 142 141 141 141 141 263 263 263 306 306 365 365 142 142 142 142 142 142 141 141 141 141 263 263 263 306 306 365 365

154 154 154 154 154 154 172 172 200 200 210 210 210 247 247 285 285 154 154 154 154 154 154 172 172 200 200 210 210 210 247 247 285 285

圖 1 1 2 2 2 3 3 4 4 5 5 5 6 6 6 7 7 1 1 2 2 2 2 3 3 4 4 5 5 5 6 6 7 7

上述資料若有變更,恕不另行通知,敬請見諒! A l l s p e c i f i c a t i o n s c a n b e m o d i f i e d .

《3 相 2 線 零 位 控 制 ( 3 Φ 2 W ) 》 補助電壓

assistance voltage

主電源電壓

main power voltage

(圖四)

220V

208V~240V

220V

380V~480V

(圖五)

(圖六)

(圖七) 16

額定電流

型號

Rated current

model

25A 35A 50A 60A 80A 100A 125A 160A 180A 200A 225A 250A 300A 350A 400A 450A 500A 600A 750A 25A 35A 50A 60A 80A 100A 125A 160A 180A 200A 225A 250A 300A 350A 400A 450A 500A 600A 750A

JK2PSZ-22025 JK2PSZ-22035 JK2PSZ-22050 JK2PSZ-22060 JK2PSZ-22080 JK2PSZ-22100 JK2PSZ-22125 JK2PSZ-22160 JK2PSZ-22180 JK2PSZ-22200 JK2PSZ-22225 JK2PSZ-22250 JK2PSZ-22300 JK2PSZ-22350 JK2PSZ-22400 JK2PSZ-22450 JK2PSZ-22500 JK2PSZ-22600 JK2PSZ-22750 JK2PSZ-48025 JK2PSZ-48035 JK2PSZ-48050 JK2PSZ-48060 JK2PSZ-48080 JK2PSZ-48100 JK2PSZ-48125 JK2PSZ-48160 JK2PSZ-48180 JK2PSZ-48200 JK2PSZ-48225 JK2PSZ-48250 JK2PSZ-48300 JK2PSZ-48350 JK2PSZ-48400 JK2PSZ-48450 JK2PSZ-48500 JK2PSZ-48600 JK2PSZ-48750

220 220 220 243 243 243 305 305 355 355 400 400 400 400 400 400 530 530 710 220 220 220 243 243 243 305 305 355 355 400 400 400 400 400 400 530 530 710

142 142 142 142 142 142 141 141 141 141 263 263 263 263 263 263 306 306 365 142 142 142 142 142 142 141 141 141 141 263 263 263 263 263 263 306 306 365

154 154 154 154 154 154 172 172 172 172 210 210 210 210 210 210 247 247 285 154 154 154 154 154 154 172 172 172 172 210 210 210 210 210 210 247 247 285

圖 1 1 1 2 2 2 3 3 4 4 5 5 5 5 5 5 6 6 7 1 1 1 2 2 2 3 3 4 4 5 5 5 5 5 5 6 6 7

上述資料若有變更,恕不另行通知,敬請見諒! A l l s p e c i f i c a t i o n s c a n b e m o d i f i e d .

※JK3PS-22180,JK3PS-22200,JK3PS-48180,JK3PS-48200 外觀類似圖4,但尺寸與零位不同


三相SCR電力調整器 THREE PHASE POWER REGULATOR 控 制 線 路 圖 (相位控制) Genera l Characteristic

三相來源電

輸入電壓,電流訊號;外部VR可調 (VR為10K5Ω) Anglog volt, current input with adjustable external VR (The VR model is 10K5Ω) 超溫保護

10V

異常輸出點

配合溫度表

電力 調整器

溫度表

輔助電源

(外部VR不使用時,請將E3,E2短路)

(Please jump E3 and E2 when external VR not be used)

負載

★外部VR調整最小值會無輸出功率 (It’ll have no output rate when adjusting external VR to minimum value.)

輸入接點訊號,外部VR可調

溫度表自動控制/外部VR控制

Contact inp ut with adjustable external VR

Auto control of PID / control of VR

10V

10V

異常輸出點 異常輸出點

輔助電源

外部接點控制

溫度表

輔助電源

溫度表自動控制/手動全壓輸出

溫度表輸入訊號外部接點控制

Auto control of PID / Manual full load of output

External connection control of PID input signal 10V

10V

異常輸出點 輔助電源

溫度表

異常輸出點

溫度表

輔助電源

★NO,COM,NC:異常訊號輸出接點240VAC/5A ★M點為控制器輸出DC5V/100mA ★機板內部功能設定 8秒緩衝

0秒

17


三相SCR電力調整器 THREE PHASE POWER REGULATOR 控 制 線 路 圖 (零位控制) Genera l Characteristic

三相來源電

輸入電壓,電流訊號;外部 VR 可調 (VR 為10K5Ω) Anglog volt, current input with adjustable external VR

(The VR model is 10K5Ω)

超溫保護

10V

異常輸出點

配合溫度表

溫度表

輔助電源

電力 調整器

負載

(外部VR不使用時,請將E3,E2短路) (Please jump E3 and E2 when external VR not be used)

輸入訊號設定 Setting input single

★外部VR調整最小值會無輸出功率 (It’ll have no output rate when adjusting external VR to minimum value.)

輸入接點訊號,外部VR可調

溫度表自動控制/外部VR控制

Contact input with adjustable external VR

Auto control of PID / control of VR

10V

10V

異常輸出點 異常輸出點

輔助電源

外部接點控制

溫度表自動控制/手動全壓輸出

溫度表輸入訊號外部接點控制

Auto control of PID / Manual full load of output

External connection control of PID input signal 10V

10V

異常輸出點 輔助電源

溫度表

★NO,COM,NC:異常訊號輸出接點240VAC/5A ★M點為控制器輸出DC5V/100mA

18

溫度表

輔助電源

異常輸出點 輔助電源

溫度表


三相SCR電力調整器 THREE PHASE POWER REGULATOR 型 號 規 格 選 擇 Choice of Specification & Models 《 3 相 3 線 感 性 負 載 ( 3 Φ 3 W ) P T S 系 列 》適用於變壓器及非電阻式負載 補助電壓

assistance voltage

220V

220V

主電源電壓

main power voltage

額定電流

Rated current

型號

model

142 154 1 JK3PTS-22025 220 25A 142 154 1 JK3PTS-22035 220 35A 142 154 2 JK3PTS-22050 243 50A 142 154 2 JK3PTS-22060 243 60A 142 154 2 JK3PTS-22080 243 80A 142 154 2 JK3PTS-22100 243 100A 141 172 3 JK3PTS-22125 305 125A 141 172 3 JK3PTS-22160 305 160A 141 200 4 JK3PTS-22180 365 180A 208V~240V 141 200 4 JK3PTS-22200 365 200A 263 210 5 JK3PTS-22225 400 225A 263 210 5 JK3PTS-22250 400 250A 263 210 5 JK3PTS-22300 400 300A 306 247 6 JK3PTS-22350 530 350A 306 247 6 JK3PTS-22400 530 400A 365 285 7 JK3PTS-22600 710 600A 365 285 7 JK3PTS-22750 710 750A 25A 220 142 154 1 JK3PTS-48025 35A 220 142 154 1 JK3PTS-48035 50A 243 142 154 2 JK3PTS-48050 60A 243 142 154 2 JK3PTS-48060 80A 243 142 154 2 JK3PTS-48080 100A 243 142 154 2 JK3PTS-48100 125A 305 141 172 3 JK3PTS-48125 160A 305 141 172 3 JK3PTS-48160 380V~480V 180A 365 141 200 4 JK3PTS-48180 200A 365 141 200 4 JK3PTS-48200 225A 400 263 210 5 JK3PTS-48225 250A 400 263 210 5 JK3PTS-48250 300A 400 263 210 5 JK3PTS-48300 350A 530 306 247 6 JK3PTS-48350 400A 530 306 247 6 JK3PTS-48400 600A 710 365 285 7 JK3PTS-48600 750A 710 365 285 7 JK3PTS-48750 上述資料若有變更,恕不另行通知,敬請見諒! A l l s p e c i f i c a t i o n s c a n b e m o d i f i e d .

(圖一)

(圖二)

(圖五)

(圖三)

(圖六)

(圖四)

(圖七) 19


單相SCR電力調整器 SINGLE PHASE POWER REGULATOR 產 品 特 性

Product Characteristic 體積精巧,散熱佳,本產品具CE國際安全之認證。 省能源,高效率,精密的溫度控制器。 保護型系列具有:來源電欠相、保險絲斷線檢知及本控制器散熱片超溫等保護,並提供異常輸出接點, 可供遠端監控使用。 Small size, good cooling, appearance construction and has passed CE international quality accreditation. Save power, high efficiency, and precise temperature controller. Protection model series include: the protection equipment, checking and finding of phase failure of power, fuse broke of this controller, and unusual output point for cooling fin overheat of this controller, for distant end supervising and controlling.

一 般 特 性

General Characteristic 主電源電壓 main power voltage 額定電流 rated current 工作頻率 work frequency 輸出方式 output type 輸 出 電 壓 範圍 output voltage range 輸 入 控 制 訊號 input control signal 使用環境 use environment

AC110V, 220V, 380V, 440V ± 10% 20A 30A 40A 50A 60A 47-63Hz 相位輸出 Phase angel 0~100% 4~20mA,1-5V,4~20mA+VR調整 週溫-10~50℃ 溼度90RH %以下 Around temperature -10ºC~50ºC, humidity under 90% RH.

保 護 系 統 系 列

Protection System Series 具來源欠相、本體溫度過熱保護裝置、保險絲斷線檢知 This controller has protection equipment of overheating, source phases shortage, fuse broken inspection, and output abnormal. 主電源電壓 main power voltage 補助電壓 assistance voltage 額定電流 rated current

20

AC110V, 220V, 380V, 440V±10% AC220V±15% 50/60Hz 20A 30A 40A 50A 60A 80A 100A 125A 160A 180A 200A


單相SCR電力調整器- 無保護系統系列 SINGLE PHASE POWER REGULATOR Choice of Specification & Models

型 號 規 格 選 擇

額定電壓 rated voltage

額定電流

rated current 20A 30A 40A 50A 60A

220V JK2220S1 JK2230S1 JK2240S1 JK2250S1 JK2260S1

重量

75 75 100 100 100

86 86 86 137 137

690 690 780 1160 1160

1 1 2 4 4

重量

75 75

102 102

103 103

740 740

3 3

input control signal

380/440V JK3820S1 JK3830S1 JK3840S1 JK3850S1 JK3860S1

126 126 126 115 115

額定電壓 rated voltage

額定電流

rated current 20A 30A

輸入控制訊號

輸入控制訊號

220V 380/440V JK2220S1-D75 JK3820S1-D75 JK2230S1-D75 JK3830S1-D75

input control signal

上述資料若有變更,恕不另行通知,敬請見諒! A l l s p e c i f i c a t i o n s c a n b e m o d i f i e d .

※電壓480VAC為訂製品

單相SCR電力調整器-保護型系列 SINGLE PHASE POWER REGULATOR - Protection System Series Choice of Specification & Models

型 號 規 格 選 擇

額定電壓 rated voltage

額定電流

rated current 20A 30A 40A 50A 60A 80A 100A 125A 160A 180A 200A

220V JK22020SF JK22030SF JK22040SF JK22050SF JK22060SF JK22080SF JK22100SF JK22125SF JK22160SF JK22180SF JK22200SF

輸入控制訊號

380/440V JK38020SF JK38030SF JK38040SF JK38050SF JK38060SF JK38080SF JK38100SF JK38125SF JK38160SF JK38180SF JK38200SF

232 232 232 232 220 220 220 243 243 243 243

93 93 93 93 142 142 142 142 142 142 142

120 120 120 120 154 154 154 154 154 154 154

5 5 5 5 6 6 6 7 7 7 7

上述資料若有變更,恕不另行通知,敬請見諒! A l l s p e c i f i c a t i o n s c a n b e m o d i f i e d .

(圖一)

(圖四)

(圖二)

(圖五)

(圖三)

(圖六)

(圖七)

21


三相固態繼電器(隨機觸發) THREE PHASE SOLID STATE RELAY

(RADOM TURN-ON)

產 品 特 性 適用於馬達頻繁啟動系統取代電磁接觸壽命不足之困擾,具CE國際安全認證。 適於220V 5HP, 440V 7.5HP以下馬達的頻繁啟動處。

型 號 規 格 選 擇 工作電壓

控 制 電 壓 DC/AC

Choice of Specification & Models 額定電流

馬力

隨機觸發(MOTOR)

上述資料若有變更,恕不另行通知,敬請見諒! A l l s p e c i f i c a t i o n s c a n b e m o d i f i e d . ※ 以上型號: J K 2 R 5 5 A - 3 B 7 5 . J K 2 R 7 5 A - 3 B 1 0 0 . J K 3 R 5 5 A - 3 B 7 5 . J K 3 R 7 5 A - 3 B 1 0 0 可以訂購加裝風扇。

型 號 規 格 選 擇 工作電壓

控 制 電 壓 AC/AC

Choice of Specification & Models 額定電流

馬力

隨機觸發(MOTOR)

上述資料若有變更,恕不另行通知,敬請見諒! A l l s p e c i f i c a t i o n s c a n b e m o d i f i e d . ※以上型號: J K A C 2 R 5 5 A - 3 B 7 5 . J K A C 2 R 7 5 A - 3 B 1 0 0 . J K A C 3 R 5 5 A - 3 B 7 5 . J K A C 3 R 7 5 A - 3 B 1 0 0 可以訂購加裝風扇。 22


三相固態繼電器(零點觸發) THREE PHASE SOLID STATE RELAY

(ZERO CROSS TURN-ON)

產 品 特 性

Product Characteristic 本產品具CE國際安全之認證。 取代單相SSR之散熱、耐電流與耐電壓不足之缺點並減少組裝上的不方便。 內鍵過溫保護系統(55A以上包含),散熱片溫度95℃以上跳脫,70℃以下自動復歸。 應用於溫度加熱控制如Heater、石英管、赤外燈管、黑體管、模溫機、電焊機...等等。 體積小、容量高,機身與散熱一體成型,散熱最佳。 本產品分為DC To AC 及 AC To AC 兩種型式供選擇用。 This controller is passed CE international quality accreditation.

reset

(圖一)

(圖二)

(圖三)

型 號 規 格 選 擇 長

控制電壓 control voltage

額定電流 rated current

零點觸發 (Heater) 三相二線式

(mm)

(mm) (mm)

24~440V

6~32VDC

25A 40A 55A 75A

JK3C25A-2B75 JK3C40A-2B75 JK3C55A-2FB75 JK3C75A-2FB100

75 75 103 130

115 115 115 115

額定電壓 rated voltage

控制電壓 control voltage

額定電流 rated current

零點觸發 (Heater) 三相三線式

(mm)

(mm) (mm)

6~32VDC

25A 40A 55A 75A

JK4C25A-3B75 JK4C40A-3B75 JK4C55A-3FB75 JK4C75A-3FB100

75 75 103 130

115 115 115 115

額定電壓 rated voltage

48~480V

重量

136 960 136 960 136 1350 136 1600 高

(g)

重量

1 1 2 3 圖

(g)

136 960 136 960 136 1350 136 1600

1 1 2 3

上述資料若有變更,恕不另行通知,敬請見諒! A l l s p e c i f i c a t i o n s c a n b e m o d i f i e d .

23


三相固態繼電器(零點觸發) THREE PHASE SOLID STATE RELAY

Choice of Specification & Models

型 號 規 格 選 擇 工作電壓

控制電壓

(ZERO CROSS TURN-ON)

額定電流

零點觸發 三相二線式

零點觸發 三相三線式

重量

JKAC3C25A-2A75 JKAC3C25A-2B75 JKAC3C40A-2A100 JKAC3C40A-2B75 JKAC3C55A-2FB75 JKAC3C75A-2FB100 上述資料若有變更,恕不另行通知,敬請見諒! A l l s p e c i f i c a t i o n s c a n b e m o d i f i e d .

註:絕緣阻抗

(電源與外殼間) (輸入訊號與外殼間)

耐壓強度

電源與外殼間 2500VAC/1分鐘 電源與輸入訊號 1000VAC/1分鐘

(圖一)

24

(圖二)

(圖三)

(圖四)

(圖五)


大安培數三相固態繼電器 (80A~180A) THREE PHASE SOLID STATE RELAY 產 品 特 性 Product Characteristic 適用於頻繁啟動系統取代電磁接觸壽命不足之困擾,具CE國際安全認證。 取代單相小容量SSR之散熱、耐電流與耐電壓不足之缺點及組裝上的不方便。 智慧型風扇冷卻,提高風扇2~3倍壽命,散熱片溫度到達55℃時運轉,45℃時停止。 內含半導體專用快速保險絲,不怕負載短路,具有保險絲R、S、T斷線檢知功能,每相都具有燈號顯示, 提供快速明確維修情況。 本控制器之保護裝置:來源電欠相、保險絲斷線檢知及本控制器散熱片超溫等保護,並具異常輸出接點, 可供遠端監控使用,接點容量240VAC/5A。 應用於射出機、壓出機、乾燥機、風乾機、模溫機、電焊機....等等,需恆溫控制器之機械。 Suitable to frequent start system to instead of use-life shortened of electromagnetic contacting, it also has CE security certificate.

The protection equipment:checking and finding of phase failure of power, fuse broke of this controller, and unusual output point for cooling fin overheat of this controller, for distant end supervising and controlling, capacity:240 VAC/5A.

(圖一)

(圖二)

(圖三)

型 號 規 格 選 擇 (D to C) Choice of Specification & Models 工作電壓

控制電壓

額定電流

三相二線式

三相三線式

48~280VAC

上述資料若有變更,恕不另行通知,敬請見諒! A l l s p e c i f i c a t i o n s c a n b e m o d i f i e d .

本公司另有AC TO AC機種,請致電洽詢。 25


三相馬達正逆轉固態繼電器 THREE PHASE MOTOR FWRlREV S.S.R. 產 品 特 性

Product Characteristic 本產品具CE國際安全之認證。 可取代變頻器或電磁開關做正逆轉之控制 無接點式,無火花,無光端磨損,壽命長,工安更有保障 內鍵互鎖保護功能,ON/OFF次數每分鐘可達60次 最高容量可達440V 3KW This controller is passed CE international quality accreditation. It can be instead of electro-magnetic switch or frequency changer to do clockwise and counterclockwise rotation control. Without connection, sparks, smooth face wearing, use-life long, more secure in the factory. Multi. lock protection of internal key, ON/OFF times can be 60 times/min. Highest capacity can be 440V 3 KW.

型 號 規 格 選 擇 Choice of Specification & Models 工作電壓

控制電壓

work voltage control voltage

負 載 0.5KW

負 載 1KW

負 載 1.5KW

負 載 3KW

load 0.5KW

load 1KW

load 1.5KW

load 3KW

重量

126

75

86

690

126 126 126

75 75 75

86 86 86

690 690 690

上述資料若有變更,恕不另行通知,敬請見諒! A l l s p e c i f i c a t i o n s c a n b e m o d i f i e d .

註:絕緣阻抗

(電源與外殼間) (輸入訊號與外殼間)

耐壓強度

電源與外殼間 2500VAC/1分鐘 電源與輸入訊號 1000VAC/1分鐘

Isolation resistance Over 20 MQ (power & external cover) Over 20 MQ (input signal & external cover) Strength of press-resisted 2500 VAC/1 min between power & external cover 1000 VAC/1 min between power & input signal

26


半導體專用快速保險絲 HIGH SPEED FUSE RESERVED FOR THE USE OF SEMICONDUCTOR Arc Voltage

Rated current Rms-Amp

Fuse Model

Size

Fig

(圖一)

(圖一)

FWP-40A14FA

700

(圖二)

FWP-50A14FA (圖二)

(圖三)

(圖三)

(圖四)

(圖四)

(圖五)

(圖五)

(圖六)

660GH100

(圖六)

(圖七)

(圖八) (圖九)

RT18W/32X

18X82 (mm)

(圖七)

RT18-63X

26X104 (mm)

(圖八)

JK3P6F-L

(mm)

(圖九)

JK3P6F-M

(mm)

(圖十)

(圖十)

27




Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.