Outline

4. Overview

The illustration below shows a long coupled pump on the base.

Motor unit Transfers torque to the pump unit via a long coupling. Observe the power voltage specified on the motor label.

Air vent port (Air vent plate)

Provided as requested.

Pump unit Outlet Inlet

Drain port (Drain plate)

Provided as requested. Note that liquid can not be drained completely through this port. Pay attention to residual liquid.

Coupling cover Covers the coupling. Do not put the hand or finger into a joint gap.

Base

The pump on a base. The base is provided if requested. Always mount the pump on the base.

Rotational direction

The pump must rotate along with the rotational direction.

Pump unit

Caution

Pump label Observe the specification on the pump label.

Wet a cloth with tap water and wring it out for cleaning the pump. Use a neutral detergent for greasy dirt and then rub with a dry cloth. Do not wipe labels or the pump body with any solvent.

Caution

Turn off main power before cleaning. Be careful not to wet the motor unit (terminal box and fan cover) and wiring. Otherwise electrical shock or short circuit may result.