Maintenance

15. Tighten the rear casing support fixing bolts (901.2) and split plate assembly fixing bolts (901.1) at the tightening torque below.

Tightening torque: 100N·m

16. Remove the guide bolts and install them on the rear casing support. Take the attached two hexagon bolts (M12×130) and screw them into both upper holes on the bracket edges all the way. Using guide bolts, the bracket can be mounted straight without hitting against the rear casing cover.

17. Crane and mount the bracket into the pump unit. *Always use guide bolts when mounting the bracket into the pump unit. Be sure to keep the pump unit horizontal.

Caution

Be careful not to catch the finger or hand in between the bracket and the pump unit.

18. Insert the bracket straight into the rear casing support by loosing the attached two hexagon bolts (M12×130) gradually and evenly.

19. Fasten the bracket with the rear casing support using hex head bolts (901.3).