Collets
Router Collets
Description ITC stock a comprehensive range of metric and imperial collets and lock nuts to suit both Perske and Rego-fix motors. Typically the collets requested are Perske VS31 & VS50 plus Rego-fix ER16, ER20, ER25, ER32 & ER40.
Sizes (mm) Style
Diameter
Length
Capacity
ER16
17
27.5
1-10
ER20
21
31.5
1-13
ER25
26
34
1-16
ER32
33
44
2-20
ER40
41
46
3-26
VS31(401E)
14.5
26
2-8
VS50(407E)
20
34
2-12
Collet System Care Collet system locknuts and collets should be treated as consumable items. Over a period of use collets will eventually lose their full gripping capacity and need to be replaced. Ideally at every tool change the collet should be cleaned to remove any build up of waste material on its surface and checked for burrs in the gripping and locating areas. Any collet found to have burrs should be replaced, as this is a prime source of broken cutting tools. The locknut should be cleaned at every tool change. The clamping surfaces and thread should also be examined for wear and burrs. The locknut should be replaced if there are any signs of wear or burrs, which will prevent the collet running concentrically in use. If the collet is not locating correctly in the locknut there is also a potential for premature failure of the cutting tool in use.
Tech Replace collets regularly. They are a Tip consumable item and will wear with use.
Tel: +44 (0) 1827 304500 / Email: sales@itc-ltd.co.uk / Website: www.itc-ltd.co.uk
P63