ISFA's Countertops & Architectural Surfaces Vol. 16, Issue 2

Page 40

The Power of Precision

From tools that make clean cuts to sharp strategies that increase efficiency and mitigate risk, discover ways you can strengthen your business.

VOLUME 16 / ISSUE 2 • QUARTER 2, 2023 • SINGLE ISSUE $14.95 THE OFFICIAL PUBLICATION OF THE INTERNATIONAL SURFACE FABRICATORS ASSOCIATION

JOINING ISFA WILL CROSS THE OTHER ITEMS OFF YOUR LIST.

FOUNDED FOR FABRICATORS BY FABRICATORS TO LEARN MORE ABOUT THE BENEFITS OF MEMBERSHIP, VISIT WWW.ISFANOW.ORG.

PROUDLY SERVING THE DECORATIVE SURFACE INDUSTRY SINCE SINCE 1997

CREDITS

Editor: Sarah Peiper

Contributors:

Stephen Alberts

Nancy Busch

Paul “Max” Le Pera

Austin Maxwell

Jessica McNaughton

Tim Saddoris

Louise Scott

Travis Sterrett

Ed Young

Proofreader: Marsha Jo Scott

Design:

V2 Marketing & Management

Printing and Distribution: LSC Communications

ABOUT THIS MAGAZINE

Countertops & Architectural Surfaces (ISSN 2372-983X) is published quarterly by the International Surface Fabricators Association (ISFA), with a fifth edition, a Buyers Guide, publishing in October.

Individual copies of Countertops & Architectural Surfaces magazine are available at the nonmember newsstand price of $14.95. Countertops & Architectural Surfaces magazine is also available by annual subscription (five issues) for $30.00. ISFA members receive a complimentary annual subscription with every membership renewal. Special rates and charges apply for orders outside of the United States. To subscribe, call (888) 599-ISFA.

For change of address, please include old label with new information, including both old and new ZIP codes. Allow 3-6 weeks for address change to take effect.

Countertops & Architectural Surfaces magazine is proudly printed in the United States of America. Copyright © International Surface Fabricators Association 2023. All rights reserved. No part of this publication may be reprinted or otherwise reproduced without the publisher’s written consent.

Countertops & Architectural Surfaces magazine and the International Surface Fabricators Association assume no responsibility for unsolicited manuscripts or photographs. Materials will be returned only if accompanied by a stamped, self-addressed envelope.

Opinions expressed by contributors in this magazine are not necessarily the opinions of Countertops & Architectural Surfaces magazine or the International Surface Fabricators Association, but rather those of the individual writers.

PHOTOGRAPHY

Photos in this publication may not depict proper safety procedures for creative purposes. ISFA and Countertops & Architectural Surfaces magazine support the use of proper safety procedures in all cases and urge readers to take steps to institute such procedures.

Photography/graphics provided by:

Adobe Walls Stoneworks

BACA Systems

BB Industries

Betterley Industries

Breton USA

Caesarstone

Colonial Saw

Coverings

Coverlam

Diabu

Diamond Products

Durasein

Ed Young

GEM Industries

Hyundai L&C

Integra Adhesives

Laminam

Lapitec

Levantina

Museum Surfaces

No Lift Install System

Park industries

Prodim Systems

Rep Methods

Sonesta Ocean Point Resort

Vicostone

ZENESIS

ZOLLER

POSTMASTER: Send address changes to:

LSC Communications

c/o Countertops & Architectural Surfaces magazine

3401 Heartland Drive

Liberty, MO 64068

THE OFFICIAL PUBLICATION OF THE INTERNATIONAL SURFACE FABRICATORS ASSOCIATION

4 • Vol. 16 / Issue 2 • International Surface Fabricators Association

Cover Photo

Integra Adhesives manufactures an innovative range of color-matched seaming and assembly methyl methacrylate adhesives, as well as a range of color-matched Sealants for the surfacing industry. Integra Adhesives products are specifically formulated for the fabrication and installation of every countertop including solid surface, quartz, stone, porcelain, laminate and compact laminate. The Integra range of seaming adhesives will save you time and money, will offer you stronger joints which are great on the new thinner sheets and will keep you healthier as they contain no styrene or isocyanates.

To learn more visit www.integra-adhesives.com.

FEATURES

14 Do You Schedule Your Maintenance Time or Does Your Machinery Do It for You?

Get the most out of your machinery with a Total Productive Maintenance approach.

24 Making Sure Your Shop Machinery Doesn’t Have You Running in Circles

When there’s uncertainty, cutting costs and maximizing productivity are crucial. Follow these steps and you’ll be breaking shop records.

28 Caution: These Sharp Objects May Improve Productivity

With the right tools, you can optimize processes, reduce waste, and improve efficiency in your shop. Consider these saws and accessories that can keep your shop on the cutting edge.

40 Fabricator Profile: Adobe Walls Stoneworks

With steadfast commitments to a quality product, its customers and employees, this Texas fabricator achieves excellence at every step of the process.

DEPARTMENTS

6 • Vol. 16 / Issue 2 • International Surface Fabricators Association
SURFACE BONDER XI GLACIER WHITE FROM INTEGRA ADHESIVES
8 Editor’s Note 10 Calendar of Events 12 Industry News 14 Education Connection 34 Sustainability Matters 46 Perspectives: Nancy Busch 47 ISFA News 52 ISFA Associate Member Directory 55 Product News 59 Perspectives: Austin Maxwell
Follow us on social media! @ISFAnow.org @ISFAnow @ISFAnow @ISFA 28 24 40 14
CONTENTS

Reap What You Sow

I’ve been gardening since I was a kid — pulling weeds, harvesting veggies and deadheading flowers for as long as I can remember. Back then, it was a chore, but as an adult, it is therapy. Coming from a long line of gardeners and farmers didn’t set me up for instant success; my green thumb was hard-earned. I experienced countless losses, but a few wins kept me at it until I finally found my stride. I think killing a lot of plants is a gardener’s rite of passage.

Living in the Midwest, I had a good four months to make the best out of the season and grow enough to preserve for the winter, so I was all about large beds with rows and rows of tomatoes, peppers, beans, squash, onions, herbs, not to mention flowers. Now I live in a climate with a continuous growing season, so my approach is a bit different. Less is more in a lot of ways.

Flower beds and fruit trees aside, I’m down to a 12 ft. by 4 ft. bed for vegetables. I adopted the square foot gardening method — a highly efficient and space-saving technique that allows gardeners to maximize their productivity in limited spaces. Developed by Mel Bartholomew in the 1980s, it involves dividing the gardening area into small square foot plots, each containing a specific number of plants depending on their size. Adopting this approach has enabled me to increase productivity and decrease my margin for error. I can plant densely and make the most of the space. I can do succession plantings: As soon as one crop finishes, I can replant for a continuous supply. Even though I am growing 12 months out of the year, it’s a huge time-saver. Less weeding, huzzah! It takes careful planning and consideration, but this square foot garden is a game-changer.

That said, even in the simplest of circumstances, things can go awry. For example, the downside to living in this climate is that you have no cold season to freeze out all the pests. So I read a lot of gardening blogs and books to troubleshoot what’s eating the cabbage or why my

cucumber vines are wilting. There’s still so much to learn, and even the best gardeners can only prepare so much when most of the battle is reacting to a problem. Maybe some of you can relate, gardener or not. Whatever your business or hobby, progress is about learning and growing.

Sometimes you have to react to unforeseen circumstances or make a plan to overcome challenges you know are heading your way. So you make an effort to learn about new ways of doing things or seek new products that can help you solve a problem. Within the building and remodeling industry, many of you are wading in the shallows of the skilled labor pool or making plans for an economic downturn. In this issue of Countertops & Architectural Surfaces, we’re with you every step of the way. From making the most out of your processes for the sake of efficiency (page 24) to a machinery maintenance plan that keeps things running smoothly (page 14) to a roundup of the latest saws and accessories that can help you streamline your processes and improve accuracy (page 28), this issue is full of solutions to all kinds of shop problems.

It’s crucial to be forward-thinking and innovative — discover new ways of doing things, like filling vacancies on your staff (page 20) or partnering with those across the industry to further sustainability (page 34). In this issue’s fabricator profile, read about Adobe Walls Stoneworks, a first-class fabrication company out of Amarillo, Texas, that upped its showroom game and saw big returns (page 40).

Success comes to those who plan for it, those who nurture it, and those who evolve with changing circumstances. Make plans A, B, C and D — however many it takes. You reap what you sow.

8 • Vol. 16 / Issue 2 • International Surface Fabricators Association EDITOR'S NOTE

CALENDAR OF EVENTS

ISFA Solid Surface Fabrication Training

June 6-7

Lakewood, Wash. www.ISFAnow.org

ISFA Webinar: 3 Tips for Presenting Price & Sending Quotes

June 7

www.ISFAnow.org

AIA Conference on Architecture

June 7-10 San Francisco www.conferenceonarchitecture.com

Behind the Surface Podcast: Silica Safety and Industry Standards with NIOSH

June 12

www.ISFAnow.org

BACA Systems Installing Profitability Seminar

June 15

Addison, Ill. www.bacasystems.com

Oregon Stone Summit: Know Your Business

June 15

Beaverton, Ore. www.naturalstoneinstitute.com

Digital Stoneworking Expo

Presented by Park Industries

June 22

Cincinnati

www.parkindustries.com/stone/event/ digital-stoneworking-expo/

Behind the Surface Podcast: On the Cutting Edge with Park Industries

June 26 www.ISFAnow.org

Behind the Surface Podcast: Savvy Software for Surface Fabricators

July 10 www.ISFAnow.org

ISFA New Member Workshop

July 12 www.ISFAnow.org

ISFA Fabricator Crawl

July 19-20

Chicago www.ISFAnow.org

Pennsylvania Stone Summit: Take Your Organization to the Next Level

July 20

Bridgeville, Penn. www.naturalstoneinstitute.com

Behind the Surface Podcast: Tracking Sales

July 24

www.ISFAnow.org

BACA Systems Installing Profitability Seminar

July 27

Orlando, Fla. www.bacasystems.com

ISFA Webinar: Improve These 3 Things To Transform Your Sales

August 2 www.ISFAnow.org

Behind the Surface Podcast: Integrating Software in Your Business

August 7

www.ISFAnow.org

ISFA Solid Surface Fabrication Training

August 8-9

San Antonio, Texas

www.ISFAnow.org

ISFA MemberConnect Meeting

August 17

Virtual www.ISFAnow.org

Behind the Surface Podcast: Digital Tools for Templating

August 21

www.ISFAnow.org

BACA Systems Installing Profitability Seminar

August 24 Meridian, Ohio www.bacasystems.com

Behind the Surface Podcast: Marketing Tools that Lead to Growth September 4 www.ISFAnow.org

ISFA Webinar: The Right Way To Do Discovery in Your Sales Process September 6 www.ISFAnow.org

ISFA Mineral Surfaces Training

September 13-14 Massillon, Ohio www.ISFAnow.org

Behind the Surface Podcast: B2B Lead Generation

September 18 www.ISFAnow.org

BACA Systems Installing Profitability Seminar

September 21 Location TBD www.bacasystems.com

Missouri Stone Summit: Know Your Business

September 21 St. Louis www.naturalstoneinstitute.com

Cersaie

September 25-29

Bologna, Italy www.cersaie.it

Marmomac

September 26-29

Verona, Italy www.marmomac.com

10 • Vol. 16 / Issue 2 • International Surface Fabricators Association
2023
Submit your event for consideration in Calendar of Events by emailing Editor Sarah Peiper, Sarah@ISFAnow.org.

IN THE INDUSTRY

Coverings Celebrates 2023 Rock Star Award Winners

Coverings, the premier international tile and stone exhibition and conference in North America, honored 15 exceptional individuals across the stone and tile industry at its annual trade show in April. The Coverings Rock Stars program has a long history of honoring up-and-coming trailblazers in the tile and stone industry who continually revolutionize and inspire as pioneers of success.

The coveted annual awards reinforce Coverings’ mission to support the advancement and achievements of the industry by distinguishing exemplary young leaders and fostering networking and educational opportunities. Award winners represent the industry’s brightest and most inventive young professionals raising the bar on performance and excellence.

Builder/Remodeler: Christopher Rachel, owner Superior Home Solutions Ashland, Neb.

Contractors/Installers: Nathan Cooper, owner Infinity Bath Aberdeen Proving Ground, Md.

Cody Cox, operations manager Cox Tile Inc. San Antonio, Texas

Randall Johnson, tile contractor The Tile Geek, LLC Meridian, Idaho

Maria Meyer, tile artisan apprentice Dragonfly Tile & Stone Works, Inc. Shorewood, Wis.

Elly Warner, apprentice installer Hawthorne Tile Portland, Ore.

Schannon Yodice, owner/tile contractor That Tile Chick League City, Texas

“The Coverings Rock Stars program celebrates many incredible tile and stone industry experts of which the 15 most outstanding nominees are being honored across various categories this year,” said Jennifer Hoff, CEO of Taffy Event Strategies, LLC, the event management company for Coverings. “The winners are an extremely talented group of individuals who provide inspiration for their peers and colleagues from the creativity, innovation and commitment they consistently showcase.”

A committee of longstanding tile and stone industry leaders thoughtfully evaluated nominations to select this year’s inductees for Coverings Rock Star status. The 2023 Rock Stars represent numerous industry segments and include the following winners:

Distributor: Melanie Lawton, showroom manager Best Tile Company North Scituate, R.I.

Interior Designer: Kenya Jones-Lowell, interior designer hospitality MG2 Corporation Puyallup, Wash.

Manufacturer: Heather Ruhl, national technical manager TEC/H.B. Fuller Construction Products, Inc.

Retailer: Jack Rautiola, head merchant, renovation Wayfair Boston

Stone Fabricator: Austin Maxwell, president Maxwell Counters, Inc. Farmer City, Ill.

Others: Casandra Guthrie, manager, IS & sales Choices Wholesale Flooring Solutions Albuquerque, N.M.

Manasa Rao, sustainability manager WAP Sustainability Consulting Chandler, Ariz.

Vincenzo Spina, stone consultant STONEX Consulting Dubai, UAE

Coverings 2024 will be held April 22-25, 2024, in Atlanta. The conference continues its aim to provide distributors, retailers, fabricators, contractors, specifiers, architectural and design professionals, builders, and real estate developers opportunities to network with industry professionals, gain cutting-edge knowledge, source the trendiest and most innovative products on the market, and so much more. For more information about attending, sponsoring or exhibiting at Coverings 2024, visit www.coverings.com.

12 • Vol. 16 / Issue 2 • International Surface Fabricators Association

Crossville’s Aggressive Carbon Reduction Goals Aim To Decrease Embodied Carbon by 2030

Crossville Inc. announced aggressive carbon reduction goals affecting its tiles’ global warming potential with a goal of achieving a 30% reduction in manufacturing embodied carbon by 2030. The company’s short-term goal is equally aggressive as it seeks to achieve an additional 10% reduction by 2024 as compared to its 2019 measurements.

The company is the first U.S. tile Manufacturer to set specific short-term carbon reduction objectives.

From its founding, Crossville has recognized that a product that comes from the earth should have minimal impact on the earth. In 2014, Crossville completed its first energy usage assessment, which led

the company to develop its Environmental Product Declarations. Five years later, Crossville achieved a 10% reduction in the tiles’ embodied carbon, beginning the path of carbon reduction in its facilities and operations. Based on that reduction, Crossville has developed new aggressive goals that embody changes the company will make to its processes to affect the tiles’ global warming potential. The company announced short-term goals of achieving an additional 10% reduction in the tiles’ global warming potential by 2024 and a 30% reduction from its 2014 baseline by 2030.

“We are exploring all the ways internally that we can drive energy reduction strategies with changes to product and process,

including investigating all new evolving technologies that improve energy efficiency while maintaining a commitment not to compromise quality,” said Lindsey Waldrep, Crossville’s vice president of marketing.

The company’s ongoing commitment is to alter and reduce manufacturing’s carbon impact through changes to product and manufacturing processes. However, Crossville products are still influenced by the energy needed to produce them. For this reason, the company can further reduce its tiles’ carbon footprint by purchasing verified emissions reductions, or carbon offsets, whereby embodied carbon is offset by contributions to projects which help make the world better, greener and more sustainable.

International Surface Fabricators Association • Vol. 16 / Issue 2 • 13
IN THE INDUSTRY

Do You Schedule Your Maintenance Time or Does Your Machinery Do It for You?

The stone industry has come a long way in the use of technology since I worked with my first fabrication shop client over 20 years ago. Almost every shop I visit today has some or all of the following:

• CNC saws.

• Water jet cutting.

• Digital templating.

• Robotic sawjets.

Unfortunately, the most common form of maintenance I see for this expensive equipment is a break-fix approach — we fix it after it breaks. This creates a heavy reliance on the machine manufacturer to supply parts quickly. It also creates unnecessary and costly schedule interruptions for the fabricator.

A few shops do a decent job of preventive maintenance. This includes:

• Greasing a fitting.

• Changing lubricant.

• Changing filters.

Some fabricators even knock the dust and dirt off their machines from time to time. To run a fab shop effectively, a more robust approach to maintaining machinery is needed.

To get the most out of a machine you have invested hundreds of thousands of dollars in, you need to consider a Total Productive Maintenance (TPM) approach.

TPM is a process that maximizes the productivity of equipment for its entire life cycle and will extend the life of the equipment. Through the

Daily Operator AM Checklist

o 1. Check coolant level through clear Plexiglas

o 2. Check heat exchanger fans (strings should be moving)

o 3. Check servo drive fans (string should be moving)

o 4. Check heat exchanger air filter (change when dark)

o 5. Check servo drive air filter (change when dark)

o 6. Check way lube reservoir (add when low)

o 7. Check main motor air filter (change when dark)

o 8. Check main motor cooling fan (string should move)

o 9. Check mist collector motor and air filter (change when dark)

o 10. Check bar feeder hydraulic motor air filter

o 11. Check bar feeder hydraulic oil level (add when low)

participation of all employees, TPM creates an environment that encourages improvement efforts in safety, quality, cost, delivery and creativity.

If you don’t schedule time to maintain your equipment, your

equipment will do it for you. If you don’t want surprise maintenance stoppages that always occur during a critical job, then you need to plan your maintenance.

TPM is the combination of the three types of planned maintenance:

14 • Vol. 16 / Issue 2 • International Surface Fabricators Association EDUCATION CONNECTION
All fill points should be marked with the proper fluid used. Sight glasses and tanks should show minimum and maximum levels. Figure 1 Place corresponding labels on a machine so any operator can easily follow the daily checklist.

EDUCATION CONNECTION

1. Preventive maintenance

Preventive maintenance is intervalbased maintenance. It consists of periodically inspecting, servicing and cleaning equipment, and replacing parts to prevent sudden failure and process problems. This includes changing the oil every 500 hours of run time, applying grease to a fitting every week, and replacing the bearings every 3000 hours. This is the most common type of planned maintenance.

2. Predictive maintenance

Predictive maintenance includes inspecting and diagnosing equipment components to determine the service life of those components. The intent is to maximize the life of the components and to replace them before that life is exceeded.

Predictive maintenance includes activities like regular:

• Chemical analysis of lubricating fluids to determine if critical components are wearing appropriately.

• Vibration analysis of shafts and bearings to assess condition.

• Infrared temperature evaluation of mechanical and electrical components.

• Nondestructive testing of stressed components.

3. Corrective maintenance

Corrective maintenance includes improving various aspects of equipment and components so that maintenance and repairs can be carried out quickly and reliably. This frequently includes modifying access to components to improve visual evaluation, labeling wear items so the correct replacement part is used and marking the proper operating range on gauges.

TPM also integrates the operator in Autonomous Maintenance (AM). In AM, the machine operator performs daily activities to aid in detecting and correcting abnormalities to prevent reduced machine performance. This includes visual inspection, routine cleaning, lubrication and data collection. The most effective AM programs have detailed documentation allowing any operator to complete the daily activities. (See examples in Figure 1.)

To gauge the effectiveness of the above activities, TPM uses a metric called Overall Equipment Effectiveness (OEE). OEE assesses the availability of the equipment, the performance efficiency of the equipment and the rate of quality output. (See Figure 2.)

There are several key steps to effectively implementing TPM.

1. Initial cleanup. Clean the machine until it looks like it did the day it arrived from the manufacturer. Cleaning helps you see any obvious areas of lubricant leaks, and since you have to physically touch every area of the machine, you will quickly identify any issues with loose electrical connections, compressed air leaks, broken latches, etc.

2. Assess the condition of the machine. Address the obvious items identified above. Also, assess whether the machine can perform to the original manufacturer speeds and process rates. Repair or replace any component that is needed to meet those original specs. This gives you a solid baseline from which to operate.

3. Standardize your maintenance procedures. Establish how you will label part numbers for consumables like filters and belts. Determine what corrective maintenance methods you will use. Document these items and train everyone on them.

4. Implement AM. Develop the daily routines required of machine operators and make these activities easy to perform correctly. Implement documentation for recording these activities and any anomalies found. Audit frequently.

As a shop owner, you have invested

International Surface Fabricators Association • Vol. 16 / Issue 2 • 15
Figure 2 OEE assesses the availability and performance efficiency of the equipment and the rate of quality output.

hundreds of thousands of dollars in the critical equipment needed to run your business. To ensure your business can consistently produce the quality products your customers expect and to meet your schedule commitments, you need to manage the condition of your equipment. If you don’t plan your downtime, your machines will do it for you. Your machinery needs to be kept in like-new condition so that it will operate at the speeds it was designed for. You need the consistent quality your equipment is designed to deliver. TPM is the best approach to ensuring your equipment supports your business goals. C C C C

A A A A

B B B B

Ed Young is the owner of Fabricator’s Business Coach, a consulting firm designed to strengthen and elevate fabrication shops of all sizes. A former shop manager, Ed fully understands the challenges of today’s professionals. He has consulted with a range of businesses, from one-person startups to international Fortune 100 corporations, covering a broad array of products and processes. As a result, Ed knows that each business needs an appropriate structure for its unique situation. To learn more about how Fabricator’s Business Coach can take your shop to the next level, visit www. fabricatorscoach.com or reach Ed directly at Ed@fabricatorscoach.com.

16 • Vol. 16 / Issue 2 • International Surface Fabricators Association

EDUCATION CONNECTION

MARKETING MATTERS: Top 10 Digital Tools for Countertop Shops

When you’re trying to reach your customers through digital marketing tactics, there are a lot of great tools on the market that can help you achieve your goals. Using the correct software for your fabrication shop can save your staff time and money, but you need a good balance. While there is such a thing as software overload in the countertop industry, I often see companies not using enough digital tools. Let’s review some tools I recommend for any countertop company’s marketing efforts.

Facebook Business Page (and Instagram)

A Facebook business page can help your shop reach a broader audience, establish its brand and spread awareness on the social network. By showcasing different materials you carry, posting photos and videos of completed projects, and engaging with customers through comments and messages, your shop can build a following — an audience. While most shops have Facebook pages, many don’t consistently post content. Try to post a few project photos a week on your page. And don’t forget about Instagram! This photo-driven platform is perfect for project photos and material or trend content.

Google Maps

A Google Business profile will give homeowners accurate and up-to-date information, such as business hours and location. This information is displayed on Google Maps, making it easier for customers to find your shop’s location with turn-by-turn directions. Your profile will house your reviews, helping build trust and credibility with homeowners. We see a good amount of traffic, phone calls and customer inquiries from a shop’s Google Maps listing. Make sure everything is accurate on your profile, and create a communication strategy with your customers that encourages them to leave positive reviews.

WhatConverts or CallRail for Google Analytics + Call Tracking

Google Analytics and call tracking tools like WhatConverts and CallRail can be highly beneficial for a countertop shop. The best part about Google Analytics is that it’s free! You can analyze website traffic, identify high-performing pages and track user behavior. This information can then improve website design and enhance the user experience. Call tracking tools enable a shop to better understand their overall numbers in terms of leads coming in. Set up goals inside of Google Analytics and track phone calls and quote form leads from your website.

Pipedrive, Hubspot, STONE ENGAGE or SalesForce for Customer Relationship Management (CRM)

A CRM system like Pipedrive, Hubspot, STONE ENGAGE, or Salesforce can help a countertop shop manage its sales leads more effectively. This is probably the number one issue we see with shops. They want to increase revenue and get more leads, but they do not use anything to manage the leads. Using a CRM enables a shop to track customer interactions, monitor leads and forecast sales. CRMs can automate lead tracking, send alerts for follow-up, and provide valuable insights into lead behavior. Having your team manage a simple sales pipeline will bring you more business and close more jobs. The beauty of the CRMs mentioned is that the follow-up messages can be automated — a terrific time-saver.

Facebook Ads

Advertising on Facebook can help your countertop shop get more project leads by targeting homeowners based on location, demographics, interests and behavior. Your shop can promote project pictures and packages that you are offering. I suggest starting with a smaller budget of around $20-$30 per day to

18 • Vol. 16 / Issue 2 • International Surface Fabricators Association

EDUCATION CONNECTION

test the waters. After you gain data to see what’s working, you can focus your campaigns on ways you know will bring results.

Google Ads

Google Ads can help your countertop shop get more project leads by targeting users searching for granite countertops, quartz countertops and tons of other keywords. Your shop can create compelling ad content, directing users to a landing page or quote form to request more information. By monitoring ad performance and optimizing campaigns, your shop can increase its visibility, generate more leads and ultimately grow its business. As with Facebook, I suggest starting with a $20-$30 per day budget here to see what works.

Mailchimp, Constant Contact or STONE ENGAGE for Newsletter and Communication Campaigns

Are you emailing all of your leads and contacts a monthly newsletter? If you aren’t, you could be losing out on business. Newsletter software like Mailchimp, STONE ENGAGE and Constant Contact can help your countertop shop get more project leads by sending regular emails to subscribers, showcasing new products, promotions and completed projects. Stay top of mind with your customers by reminding them each month about what you offer and showcasing your projects. The added benefit of a newsletter is that it can travel beyond your contact list when someone forwards it to a friend or relative who might be looking for a new countertop.

Canva

Canva is a fantastic tool for designing creative elements for social media, websites, printed materials, business cards — you name it. You can create the content using design templates, editing tools and a media library. You can upload your project photos and feature them in one of the thousands of design templates in Canva’s arsenal.

This is truly a great solution that can make anyone a graphic designer.

Buffer, Hootsuite or STONE ENGAGE for Social Media Management

Scheduling your social media posts in advance is a great way to put out content consistently. Tools like Buffer, Hootsuite and STONE ENGAGE make this easy to do. Have someone on your team create at least 15 posts per month and then schedule three per week using one of these tools. Using a social media tool will also help you look at each platform’s analytics. You can see which posts get the most likes and shares and determine the time of day you get the most engagement, which could help you optimize your content.

ChatGPT

You have probably heard of AI tools these days, and right now, ChatGPT is all the rage. You can ask this tool to write something on just about any topic under the sun, and it will create content with the click of a button. This is a great way to get content ideas or refresh existing copy for advertising, blog posts, social media and more. Below is an example of a social media post it wrote:

Stephen Alberts is the owner of the Countertop Marketing Co. and STONE ENGAGE. They specialize in helping countertop companies grow the retail side of their business outside of word-of-mouth and referrals. They also offer software to help you engage more with customers and close more countertop projects. To learn more, visit www.countertop marketingco.com or www.stonengage.com You can also email Stephen at steve@countertop marketingco.com

To get this social media post, I entered: Write a two sentence Facebook post that mentions a granite countertop sale we have and use emojis in the post.

There is no shortage of software solutions that can help you achieve your marketing goals. Keep in mind: You don’t have to do everything all at once. I recommend clients start with the first four tools on this list and expand from there. If used properly, these digital marketing tools can help your shop operate more efficiently and grow the business.

International Surface Fabricators Association • Vol. 16 / Issue 2 • 19
C C C A A A B B B 2 2 2

How To Find, Evaluate and (Quickly) Hire High-Quality Talent

Everyone knows that the strength of our organizations is only as good as the people we employ. Having the right people on your team is essential. Getting the right people in place might be one of the most challenging aspects of running a business. In our current market, filling openings and finding the right talent for your organization can be difficult. With an unprecedented labor shortage, you may need to think outside your usual hiring process.

Hiring good people requires more time, effort and money than most realize. Worse, it costs your operation time and money when key positions go unfilled. People are working on tasks that anyone could do (you included) rather than spending their time on things that only they can do. Having the right people in place can be profoundly intangible in its effects (sometimes hidden). Still, we would assert that nothing makes a smoother operation, a stronger team, happier customers and lower stress levels.

Great candidates are out there looking for the right next step in their careers, and they might not realize that the stone industry could be an excellent fit for their talents. Or maybe a great candidate with stone experience is available, but your job description isn’t compelling enough. Or those qualified candidates who have tried applying can’t get ahold of busy hiring managers. Hiring great people is a competitive process. It can be done well but must be prioritized as much as the other strategies within your business.

The Search Begins

When looking for your next great hire, is anyone on your team ready to be promoted? Before you post that next job opening, look for candidates internally. Who on your team is prepared to level up? Promotions are essential because employees want a viable career path. Changing someone’s scope can reenergize their work ethic instead of incentivizing them to work hard due to a pay increase. Doing this opens up other roles within your organization that may be easier to fill.

When looking outside your organization, remember that candidates have a digital footprint. Everyone in our world does these days. There are tools out there that can help you quickly identify candidates with the right experience. Consider a few of these:

• LinkedIn Recruiter Lite Subscription: Not quite as expensive as a full-on LinkedIn recruiter membership but offers increased resume searching capabilities on the platform.

• Indeed Recruiter Subscription: This is similar to the LinkedIn recruiter subscription, although a bit pricier. It does offer an increased ability to search Indeed’s extensive candidate database to find the right candidate.

• Ashby: This recruiting software requires some financial investment and focus of energy on your side but will work on your behalf to find, contact and seamlessly communicate with candidates.

20 • Vol. 16 / Issue 2 • International Surface Fabricators Association

Evaluating a Candidate

When considering a candidate, focus on the three C’s: culture, character and competency.

• Culture: Do you know what your company culture is? Do you know yourself and your leadership team enough to understand who will be a good fit? Ensuring a candidate will thrive in your environment is as important as the technical skills they bring to the table.

• Character: Are candidates telling the truth? Do you have time to call three references to find out? Just because someone was let go in the past doesn’t necessarily mean they were at fault. Ask some leading questions in the interview to learn about their ethical compass.

• Competency: What are the pillars of each job description? Ensure you’re clear about your needs and that your candidate responds well to the tasks you’ll be asking them to do. Measuring competency is all about hardcore, concrete data. What previous data can the salesperson you’re interviewing present to you as measurable proof of success? How many square feet per day was the template technician candidate previously able to accomplish? Did you test that person to determine if they can accurately read a tape measure? Did you test them to find out if they can run the laser?

Onboarding

How do you get great candidates across the finish line? Onboarding is usually about efficiency and clear communication. Candidates will not convert if the onboarding process takes more than a few days. They must hear from

you if you want to keep them interested in your position. Get an offer letter with competitive pay and benefits, and get them started as soon as possible.

When communicating with your potential new hire, we recommend having a liaison between you and them — an advocate who can keep communications consistent and effective. Enroll someone in human resources, administration or operations to help with this, or consider hiring a recruiter to be part of your team. Finding great people, putting them through the appropriate evaluation processes, and getting them across the finish line should be someone’s full-time job. If no one on your team has time and you aren’t able to hire someone internally, partner with an external recruiting firm.

A recruiting company will pursue candidates who aren’t even job shopping and quickly catch those who are. They have the time and resources to search that you and your leadership teams do not have. They can fill any position and work alongside your existing recruiting efforts to help you fill jobs faster — and with better talent — so your company can thrive.

Travis Sterrett is the director of sales for Bronwick, a national full-service recruiting firm that helps companies in the stone industry find and acquire the talent they need to run and grow their businesses. Bronwick is interested in long-term partnerships with companies ready to take their hiring to the next level through focused attention on getting the appropriate people in “the right seats on the bus” (—Jim Collins, Good to Great). Learn more at www.bronwick.com.

The labor market is challenging, but using these tools can fill openings and inspire good work among new hires and existing employees. If you cannot focus on recruiting full time in-house, allowing a recruiting firm to come alongside your team could be a helpful next step. The money you invest will pay dividends when your new hires quickly bring value to your company. Perhaps you’ll even find your next leader — someone who could take the reins when you retire. C A B 2

V

Making Sure Your Shop Machinery Doesn’t Have You Running in Circles

I was mentored by some of the best plant managers in the country and I noticed one consistent behavior among the best leaders. They all started by working with operators to understand the problems and inefficiencies.

Uncertainty right now is a real thing. We’re still recovering from COVID and we’ve just had the second- and third-largest bank failures in history. We have no idea what the fallout is or how the economy will perform moving forward. Regardless of what happens, you still need to run a strong shop and get the most from your machines and your people. So, if … it … does hit the fan, you’re prepared.

When there’s uncertainty, cutting costs and maximizing productivity are crucial. But isn’t it really important at any time? In some cases, you’ve invested between $250,000 and $500,000 in these machines. You should be pushing them to the limits to get maximum production. Follow these steps and when you’re done, you’ll be breaking shop records, producing more slabs than you thought possible on your machines, and have a process that ANYONE can run if the dreaded turnover visits your door.

Why I Don’t Eat Chef Boyardee Ravioli

In my past life, I worked for the second-largest food-producing company in the world, ConAgra Foods. I was on a special technology team and I got to travel around the country to see how things were made, like Chef Boyardee, Egg Beaters, Swiss Miss, and more. I’ll eat all of it except for Chef Boyardee’s Ravioli. Not only do I not buy it, but I close my eyes when I walk by it in the grocery

store. Trust me, you don’t want to know what’s in this stuff.

Outside of learning how these products are made, I was mentored by some of the best plant managers in the country and I noticed one consistent behavior among the best leaders. They all started by working with operators to understand the problems and inefficiencies. It makes sense if you think about it, but is often overlooked by managers.

Your employees have chosen to run your CNC or wet saw. They know they’re good at it, and, believe it or not, many of them enjoy it.

Shop Floor Productivity? Think NASCAR

I liken it to a NASCAR race. I’ll never forget the first race I went to — the speed, the power, the noise, the r-u-m-b-l-e. It’s exhilarating! You can literally feel it in your bones. But then, it was the circles. And more circles. Then, even more circles. How could anyone enjoy that for hours on end? Around and around and around.

Well, they do. And these people know how to run their machines better than anyone else, and they achieve things that are impossible for most. If you or I were in the driving seat, we could never do what these skilled and trained professionals could do. So, what is the one thing that would completely destroy the race in a matter of minutes — and it’s not a pileup?

STOP KEEPING SCORE.

If they stopped counting how many times they

24 • Vol. 16 / Issue 2 • International Surface Fabricators Association

went around the track or what position they were in, why would they bother pushing their machines to the limit? Why can’t we tap into the same competitive environment to achieve on the shop floor?

Improve Production: Step by Step

Before you invest in that new machine, make sure you’re running your current machinery the best you can with the operators you have. Here’s how to do that.

Step 1: Track your downtime and create visibility.

Leaning into the NASCAR theme, I own another company called ThriveMES that tracks and improves machine downtime all over the world. One of my favorite stories was about what we did for Amsoil, the premium oil company. In all types of manufacturing, there are changeovers. This is the time it takes to convert a machine from running one product to another. Amsoil does about three to four each day per manufacturing line. Their schedule was planned for 20 to 25 minutes per changeover. Once they started tracking it, they found it was actually closer to 45 minutes. Imagine how that adds up across dozens of lines!

After measuring it, they were able to manage it. They went from 45 minutes to under 20 minutes per changeover. This enabled them to run their busiest time of year without any overtime and make preventive maintenance a priority to keep the machines in tip-top shape without messing with the production schedule.

Staying with the NASCAR theme, another customer, AIRLIFT (they invented the air suspension that helps cars hug corners), found out that some machines just far outperformed others. They actually ended up shifting all their production to a handful of operators and machines, and significantly increased output. Do you know which machines and operators in your shop work most efficiently? You are likely shorthanded, so you may be able to consolidate your production into fewer machines to work more efficiently or maybe even with fewer operators. But, you don’t know if you don’t measure it.

Step 2: Create a competition.

Once you measure it, you have the facts you need to see what’s causing you the most downtime. So, how do you manage it? I had a client who said his bottleneck was the wet saw. He was considering kicking out a wall and buying a new wet saw.

Tim Saddoris is the president of Grand Onyx, a firm dedicated to building world-class surface fabricators. Grand Onyx helps companies define operational processes and create road maps to achievements that enable more predictable revenue, stronger margins and foster legacy businesses that stand the test of time. To learn how Grand Onyx can help with hiring or automating your business, visit www.GrandOnyx.Pro.

Tim’s always willing to connect … AFTER the NASCAR race is over.

You can uncover the roadblocks that are preventing you from operating at peak efficiency, so you can take proactive steps to improve productivity. Instead of running in circles, you can start running circles around your competition — just like the NASCAR drivers do on their victory lap.

So, we started tracking his machine usage — the percentage of time the machine is running during a scheduled shift. You get that by subtracting the downtime from the amount of time it should be running.

His average machine usage was 65%. That meant for more than a third of the day, his wet saw wasn’t running. In an eight-hour shift, that’s about three hours of total downtime. That’s a lot of wasted time that machine isn’t producing. When we showed the operator we were tracking production, he started to pay attention. Within a few weeks, machine usage jumped to 85%. That’s an extra 1.5 hours of production — just because we were keeping score.

Now, I can’t say he didn’t do anything differently, because obviously he did. But what?

Step 3: Document the process.

Once you’ve improved the process, you need to document what changed to capture that knowledge for the future. As your operator has pushed the limits, ask what they’re doing differently. Can it be documented?

With this client, we discovered that the time between jobs had been reduced from eight minutes to five minutes. Over the course of a day, that’s a big deal. The operator had changed the job-to-job process. By documenting what he was doing differently, we made it part of the standard operating procedure for any operator. This is especially important in dealing with the inevitable turnover that’s likely to occur in the future. Better processes become part of the training for replacements.

If you don’t have the time or capacity to document, here’s a suggestion. Talk to your local mechanical or industrial engineering college. Ask to participate in a school project or offer an internship or school project to document your process. I’ve seen it done. These kids are so excited to document your process and get some real-world experience — and it’s free!

Another idea is to consider discreetly setting up a camera. While you don’t want to spy on your employees, recording the workflow can help you find places you can streamline operations. You can pick up a Wyze Camera and SD card. They’re cheap but work just fine and can store weeks and weeks of footage. Reviewing the video can help uncover patterns that create inefficiencies. And maybe you’re not going to do this yourself, but you could enlist that college student to do it. You get the info and they get the experience. Win-win.

A A A

B B B 2 2

2

26 • Vol. 16 / Issue 2 • International Surface Fabricators Association
Tracking your downtime, creating competition and keeping score, and documenting your processes can produce significant results. You can uncover the roadblocks that are preventing you from operating at peak efficiency, so you can take proactive steps to improve productivity. Instead of running in circles, you can start running circles around your competition — just like the NASCAR drivers do on their victory lap. C C C

These Sharp Objects May Improve Productivity

When it comes to cutting stone, porcelain, solid surface or quartz, having the right tools can make a world of difference in terms of accuracy and productivity. Faster cutting speeds, reduced downtime for blade changes or adjustments, and improved accuracy can contribute to shorter completion times and increased output. With the right tools and accessories, you can optimize your cutting processes, reduce material waste, and improve overall efficiency in your shop. Consider these saws and accessories that can keep your shop on the cutting edge.

Robo SawJet M-Series by BACA Systems

Blue Eagle Bridge Saw Blade from Diabu

BACA Systems is adding to its cutting lineup the Robo SawJet M-Series, an allinclusive mitering sawjet packaged on the industry-proven, reliable and maintenancefree Kuka Robot. With 650+ systems in production and countless success stories, the Robo SawJet M-Series is the right choice for all cutting processes. The M-Series introduces the all-important mitering process to the Robo SawJet product line. It features 0-50 degree dynamic miter angle control for both the saw and waterjet process. Also included is a new revolutionary technology to maintain accurate parts. All of BACA’s robot systems allow for the customization of the machine layout. This allows for traditional front load, side load, or pass-through cell configurations. BACA provides the only system that can be converted from a single tank to a dual tank with minimal expense. Learn more at www.bacasystems.com.

Made in Germany by Diabu, this cleancutting, fast blade for quartzite, granite and quartz cuts with 20 mm high water pocket segments that reduce chipping, speed up cutting and allow less friction. Cut Taj Mahal in a single pass! Available in 14-, 16- and 18-inch sizes. Various arbor sizes are available. The recommended rpm per size for quartzite are 1500 rpm for the 14-inch blade, 1350 rpm for the 16-inch blade, and 1200 rpm for the 18-inch blade. Depending on the materials, you’ll get cutting speeds between 35 and 130 inches per minute. More information is available at www.diabu.net.

ADW iKon Dekton Bridge Saw Blades from BB Industries

The ADW iKon blade is made specifically for Dekton, Neolith, Laminam and other ultra-compact surfaces. This blade is certified and ready to cut fast and provides life with a 10 mm segment and a silent core for your projects. A leader in the UCS market, ADW is available from BBI. It is available in 14-, 16- and 18-inch sizes and is designed for wet use only. The 16-inch blade runs at 2000 rpm with a speed of 3 to 5 feet per minute. The 18-inch blade runs at 1800 rpm and cuts 2 to 4 feet per minute. For miters, operators should reduce rpm speeds by 30% for optimal performance. Learn more about this and other blades from BBI at www.bbindustriesllc.com.

28 • Vol. 16 / Issue 2 • International Surface Fabricators Association

STRIEBIG Edition 60 from Colonial Saw

VOYAGER XP CNC Saw by Park Industries

With power, flexibility and accuracy in one compact machine, the VOYAGER XP

CNC Saw is the cutting solution you need. Powered with a 27 horsepower motor and automated

Adding to STRIEBIG’s arsenal of features designed to make panel processing safe and easy, the Edition 60 features a strong integrated panel lifting device allowing for ergonomic, smooth cutting of panels by one operator. The comprehensive standard equipment and legendary STRIEBIG accuracy guarantee short processing times and safe operation. The Edition 60 panel saw is a full-size, fullyloaded Standard S machine plus two-panel lifters that can be used for materials up to 10 feet by 7 feet and up to 350 pounds (175 pounds each), allowing for easy one-person panel processing. Users can add a third lifter to process panels up to 16 feet by 7 feet and weigh up to 525 pounds.

Other features include the wood support wall with integrated small parts support, panel lowering device with two panel lowering units, pneumatic clamping of the motor carriage and auto-locking support rollers, digital measuring system DMS-Y with fine adjustment, and laser line to show placement of horizontal cuts. V-grooving and coving are available on all models. Whether you need a primary cutting solution or an offline saw for remakes, all models give you seam-ready cuts. New machines can be ordered with a fine adjustment thumbwheel and digital counter built into the saw head for fast and precise depth adjustments on the grooving head. Find more information at www.csaw.com.

ultracompact programming, it cuts difficult materials such as porcelain and quartzite with ease. Its 5-axis design brings versatile capabilities like incremental routing, arc cutting, mitering, leathering, engraving and more. The TightCut feature nests parts closer together, increasing material yield by nearly 10% while reducing the time spent milling. This helps with cutting sinks, “L” pieces and seams efficiently. With simple programming and the ability to cut in manual mode, its operator-friendly controls make it the perfect saw for your first CNC cutting machine.

One customer shared, “Park made my first CNC experience so great, I can’t help but recommend the VOYAGER XP. I am loving the saw and the service I’ve received. Everything has been quality through and through.” Learn how you can grow with the VOYAGER XP at www.parkindustries.com/voyager.

Veloce Blade by Lapitec: +50% speed +30% Longer Lifetime

Driven by its pioneering spirit, Lapitec continues to invest in research and innovation to offer fabricators cutting-edge technologies and meet the needs of demanding fabrication shops. Lapitec Academy developed the Veloce Blade to increase the processing performance of Lapitec sintered stone and other materials.

Extensive testing has been conducted on traditional and nontraditional cuts, making it a reliable tool for a variety of cutting scenarios. Available in two sizes (14 inches and 16 inches) with a 50/60 arbor and two pin holes, it’s suitable for both straight and miter cuts.

This technology’s thick and durable core construction combined with a segment height and width of 10 mm by 3 mm offers unparalleled cutting performance. Professionals in the industry will find this blade invaluable for their cutting needs, and it is sure to set a new standard for sintered stone cutting performance. For more information, visit www.lapitec.com.

International Surface Fabricators Association • Vol. 16 / Issue 2 • 29

Combi by Breton USA

The newly upgraded Combi by Breton is an advanced combination waterjet and bridge saw. The Combi is fully equipped with automated features to maximize production and efficiency, such as vacuum cups to reduce overcuts. Miterwave is the software and hardware package designed to execute perfect miters, especially on porcelain, sintered and ceramic material. Built to last, this new version of the classic combination machine comes in a compact and rigid monoblock structure without requiring invasive foundation work to increase stability and perform higher-quality work with greater accuracy. All Breton machinery comes with a guarantee of local, American-based service, including a 24-hour hotline. For more information, visit www.bretonusa.com.

Terminator Blades for Porcelain, Granite and Quartzite

For more than 25 years, Terminator has continued to innovate to provide efficient products for its customers. With its continuous rim construction, Terminator’s “oldie, but goodie” Continuous Rim blade is another perfect pair for your porcelain and granite projects. Laser cut “J” slots facilitate cutting performance. Four-inch and 5-inch diameters can be used wet or dry. Seven-inch and up blades are for wet use only.

The Nanocut.Q3 blade has been designed, tested and retested to yield fast, reliable results on quartzite materials. On 3cm Taj Mahal quartzite, it achieves pass-cutting parameters of 120 IPM for standard 90-degree cuts and 45 IPM for 45-degree miter cuts. The ability of the Q3 to cut freely on a hard material makes it a great cross-over blade to cut other materials such as granite and engineered stone. Savings can be realized by not purchasing multiple blades and reducing blade change-out times. For more information, visit www.terminatordia.com.

V-Grooving Router from Betterley Industries

The Betterley V-Grooving Router is the only hand-held router designed to miter fold half-inch-thick solid surface material. Miter folding solid surface material saves time by creating built-up edges, dropped aprons, backsplashes and more in a single-pass operation. The tool cuts a precise “V” groove (or miter) in the material, an adhesive is applied in the groove, and the material is then folded. The resulting joint is virtually invisible with no adhesive squeeze-out on the exposed surface, providing a finished square edge as is or ready for profiling without the additional edge routing and sanding typically required for built-up edges. With the ability to quickly adjust the fence from 1 to 6 inches from the edge of the sheet, the tool easily accommodates almost any application for drop edges, aprons and backsplashes. To learn more about this and other tools, visit www.betterleytools.com.

30 • Vol. 16 / Issue 2 • International Surface Fabricators Association

The ZOLLER »smile 420« Presetting and Measuring Machine

Distributed exclusively in the United States by GranQuartz, the ZOLLER »smile 420« presetting and measuring machine allows stone fabrication shops to quickly and precisely preset tools outside of a CNC machine. The presetter calibrates offline to reduce setup times, increase machine productivity, extend tool life and save money. The machine’s SK 50 high-precision spindle means almost any tool-receiving system can be inserted without conversion measures. The »smile 420« gains enhanced

data gathering capabilities when used with the ZOLLER »flash« Tool Management System. This software tracks tool usage and location and notifies users when it’s time to dress or EDM tools. As more data is collected, users can forecast future tool consumption, estimate when new tools are needed, determine tool consumption by user and machine and more. This hardware and software combo saves users an average of $25,000 annually per machine. To learn more about the »smile 420« and schedule a demo, visit www.granquartz.com.

OBSIDIAN Blade by ZENESIS

Meet the newest ZENESIS silent core bridge saw blade, OBSIDIAN, designed to cut fast and clean on engineered stone, porcelain, marble and even the hardest quartzite. This is made possible using their latest and most innovative diamond patterning technology. This new technology increases the number of cutting/contact points by up to three times and significantly improves performance. The unique metal bond matrix is engineered to work with virtually all natural and engineered stone. It’s available in sizes ranging from 12 to 20 inches with segments of 25 mm and an arbor size of 60/50 mm. Learn more at us.zenesistechnology.com. C

A

International Surface Fabricators Association • Vol. 16 / Issue 2 • 31
Scan this code to learn about a tool management software solution by GranQuartz and ZOLLER
C
2 2 2 V V V
C
A A B B B

REASONS TO

Start Using Cartridge-Based Adhesives

Time, Time, Time.

Let’s look at a day in the life of a stone fabricator. The fabricator’s first job of the day is to glue up some mitered edges for an upcoming installation. The process begins with the fabricator opening a can of adhesive. They take out a large scoop onto their mixing board, making sure there is more than enough to complete the job with one mix. After inspecting the color of the countertop to be assembled, they slowly add pigments, mix it all together and inspect the match. They realize more pigment is required, add more and mix again, repeating until the color is finally close enough. They add their activator and give one final mix. Next, taking their palette knife they begin applying adhesive to the edge, trying to keep the adhesive application even, while moving quickly to transfer all the adhesive needed from their board to the countertop edge. It’s a race against time to get all the adhesive applied and then position the slabs into place and clamped before the adhesive sets; the adhesive is curing whether they’re ready or not. After assembly, our fabricator is left with their mixing board of excess adhesive, adhesive dripping on the floor, and adhesive squeeze-out to clean off the surface before it sets.

Now imagine that first fabricator is a new employee. The time to train and get good at mixing pigments and learning the technique for mixing and applying adhesive is significantly longer than training a new employee on a cartridge.

If that same fabricator used a tube of premixed adhesive, their first job would be to pull up the color match app and find the correct adhesive to use. Then they head over to the shelf and grab the cartridge and a new mixing tip, pop it on, give it a purge, and begin laying a bead. Laying down the perfect amount of adhesive in seconds, they’re able to stop and assemble as they work as the adhesive that’s still in the cartridge won’t cure until they need it. And because they were able to use exactly what they needed, there is little waste material on the floor, and only a tiny bit left in the mixing tip to be thrown away. The cap is

replaced on the cartridge, ready to be used again for the next job. Using cartridges instead of bulk means shorter onboarding of new staff and the ability to use subcontracted labor if required.

Consistent, Repeatable Results.

Cartridge-based adhesives create standardization in the fabrication process. They ensure the perfect mix of adhesive and hardener, and perfect color matches. Mixing tips eliminate air pockets that are often introduced with hand mixing. With more time to fix and assemble, removing color matching from the equation, and no air pockets, every fabricator can produce the

32 • Vol. 16 / Issue 2 • International Surface Fabricators Association
Ready to use color matched adhesives. Quick purge and you’re ready to apply.

same quality of work quickly and easily. Industry surfacing trends have moved to clean whites, grays, neutrals and blacks. Gone are the days of surfaces with various colors and large pieces of quartz to help hide seams. Unfortunately seams are harder to hide, and customers have higher expectations. An adhesive with the correct color and transparency is a must.

Health, Safety and the Environment.

Cartridge-based adhesives use the latest Methyl Methacrylate (MMA) technology, and they come with the GREENGUARD Gold certification which means they are free from styrene, isocyanates and other harsh chemicals. They are safer for employees and safer for customers in the environment where the countertops are installed. Because the fabricators aren’t mixing chemicals right under their nose and there is less chance of spills, cartridges reduce unsafe exposure.

In addition, cartridge-based adhesives have minimal waste. As the adhesive is dispensed, the pistons in the cartridge

clean the inner walls of the tube, meaning every bit of product is removed from the cartridge and usable for installation. When the cartridge is empty, it is ready for disposal.

Technology Has Changed.

Some fabricators believe that MMA adhesives are good for solid surface, but not strong enough for quartz or stone. This is not the case. Today’s cartridgebased MMAs can tackle the toughest tasks, they are strong and durable, and they have been stringently tested.

Interior trends are seeing countertop materials being applied vertically to walls and fireplaces and large waterfall edges. The results are dramatic and exquisite. New challenges require MMA adhesives to offer advanced properties of greater shear strength and reduced sag on application.

Demand for outdoor installations has also forced adhesives to adapt to weathering conditions and ultraviolet exposure. Integra Adhesives is one such manufacturer offering adhesives like Surface Bonder Zero and Rapid designed

specifically not to drip, making it perfect for vertical or angled applications. Surface Bonder Ultra, developed for higher strength bonding on ceramics, is weatherproof for outdoor kitchen applications.

Every aspect of assembly has been tested, and in every case, the MMA cartridge-based adhesives provide a more consistent result, easier application, less waste and faster throughput.

Cartridge-Based Adhesives Are Cost-Effective.

Looking purely at volume, one might compare the cost per milliliter of a can of knife grade adhesive versus a cartridge of premixed adhesive and come to the incorrect conclusion that cartridge costs more. Instead, considering the savings from mixing, curing time, quality, training, waste, and most importantly, safety, the postive impact of cartridge-based adhesives becomes more evident. C

International Surface Fabricators Association • Vol. 16 / Issue 2 • 33
C C
A A B B B
A
Apply color matched adhesive.
No
drips or air pockets. Easy to clean up with minimal waste.

SUSTAINABILITY MATTERS

Turning Over a New LEEF

As we delve even deeper into holistic sustainability and how ISFA can help drive beneficial lasting change to the industry, we need to focus on alignment and continuity in the enterprise chain. This chain refers to stakeholders in the transactional field — primarily manufacturers, distributors and fabricators — for this discussion.

To this end, ISFA is looking at many ways to create a superhighway that aligns manufacturing with fabrication so that the sustainability story that begins with environmentally friendly, responsible factories and products do not end at the time of material dispatch from warehouses. Linking eco-vested fabricators to like-minded products and manufacturers will encourage the continuity of the sustainable story while driving a more significant and ultimately more responsible impact on the industry and the environment.

We see a growing number of data points for sustainable initiatives today, indicative of momentum. These include products, manufacturing environments and more. Companies can operate and report on their commitment to the environment, align with the growing demand for sustainable projects, and differentiate with a humanitarian flair. All good reasons, and yet their story and greater sustainable value proposition are not necessarily transferred from enterprise to installation. While it is not their responsibility to ensure such, manufacturers can play a vital role in helping to create alignment. Consistent with their stated missions, they should also want an aligned hand-off of their green efforts to a fabricator that will further support environmental and holistic stewardship.

So how can ISFA help design and encourage such an integrated alignment model? Well, a precedent has been set that we can follow. Much as architects and project owners seek to optimize their Leadership in Environmental and Energy Design (LEED) points, fabricators can and should do their part to support, complement and continue this leadership paradigm through a proposed ISFA designation: Leadership in Environmental & Energy Fabrication (LEEF) certification. Essentially LEEF certification will have ways for fabricators to earn LEEF points. The

more points earned, the higher the designation on the LEEF tiered certification scale.

The 35,000-foot view here creates a formal way to acknowledge and incentivize investments in sustainable operations by a fabricator while facilitating the all-important continuum we are seeking. Whereas to date, sustainable investment in a fabrication business tends to stem solely from the personal beliefs and values of the company’s leadership, now we are looking to establish some potential financial incentives for fabricators to pursue eco-stewardship.

Theoretically, a LEEF fabricator could be a primary goto for a manufacturer with eco-friendly products and where environmental stewardship is a core value. This alignment helps to deliver an integrated solution to the architect or project owner while optimizing the care and concern component on environmental impact from cradle to bed (from manufacturing to installation).

To begin the evaluation process, we contacted a handful of companies more reasonably known for their penchant for sustainability. We asked their thoughts on their commitment to sustainability and how they might value and support a LEEF initiative.

Countertops & Architectural Surfaces polled DuPont (Corian Design), Lapitec and Cosentino for their thoughts.

CTAS: Tell us your sustainability story. What efforts in processes and products is your company making toward sustainable materials and manufacturing?

Corian Design: We take a three-pronged approach in our commitment to sustainability:

• Enabling a circular economy.

• Promoting transparency.

• Minimizing our environmental impact.

34 • Vol. 16 / Issue 2 • International Surface Fabricators Association

SUSTAINABILITY MATTERS

life cycle environmental impact of each, and Health Product Declarations (HPDs) that give information on human and environmental health.

• In a drive toward zero sample waste, we’ve updated our sample program to help keep materials out of landfills by facilitating the return of unused samples for recycling.

• We’ve also introduced the Corian Design Visualizer App, a digital approach to viewing the stunning array of Corian aesthetics in potential end-use applications and, again, reducing sample waste.

Enabling Circularity

Select Corian Solid Surface colors contain at least 6% and as much as 13% recycled material and are certified by Scientific Certification Systems (SCS) for stated recycled content.

Promoting Transparency

Corian Design materials are NSF 51 certified, UL certified as mold resistant, and do not contain bisphenol A (BPA) — all certifications that align with the American Institute of Architects (AIA) Materials Pledge. Corian Design materials have also received important independent certifications for environmental performance, including GREENGUARD Gold, National Green Building Standard (NGBS) Green Certified, and Living Building Challenge (LBC) Red List Free.

Reducing Environmental Impact

Corian Design is committed to using innovation expertise to reduce the environmental impact of its products and operations. Here are some of the ways we do this:

• Suppliers and raw materials are chosen responsibly, using pigments free of heavy metals and toxins.

• Pre-consumer waste in manufacturing has been reduced and recycled into new products, eliminating it from landfills since 2011.

• The process water used at our Corian Quartz facility is recycled.

• 100% of the electricity used to make our products in our North American facilities comes from renewable energy sources.

• Corian Design products have Product-Specific Type III Environmental Product Declarations (EPDs), providing the most credible, independently verified information about the

• Corian surfaces can be easily repaired, increasing the potential in-use lifetime of the products and reducing the need for frequent replacement.

We continue to examine ways to increase manufacturing efficiency and reduce waste in our production processes, as well as determine ways to recycle materials at the end of their life cycle. We are focused on providing sustainable solutions for our customers and the environment.

Cosentino: Cosentino has integrated sustainability into every facet of its business and has made incredible progress toward its goals.

All Silestone products are made with our pioneering HybriQ+ technology, a sustainable manufacturing process that uses 99% reused water, 100% renewable electric energy, zero water waste, and a minimum of 20% recycled raw materials within its composition. Also, this new manufacturing process significantly reduces the presence of crystalline silica to a maximum of 10% (HybriQ) or 50% (HybriQ+) — compared to 80%-100% for others in the industry — to aid in making the fabrication process safer than ever.

International Surface Fabricators Association • Vol. 16 / Issue 2 • 35
Corian Solid Surface Peppered Terrazzo Cosentino Silestone Sunlit Days, Cosentino’s first-ever carbon neutral collection for Silestone, featured in Cala Blue.

SUSTAINABILITY MATTERS

approximately 20% of Cosentino’s annual electrical consumption. At our factory, we reuse 99% of the water that we consume. This year, our Wastewater Reclamation Plant will become active, putting the wastewater discharged by our neighboring communities to new use, marking another milestone in our sustainability efforts.

Finally, Cosentino has its own Waste Management and Recovery Plant, which enables the company to manage tons of solid waste, some of which can be recovered and used as recycled raw materials in our products.

Within our ultra-compact Dekton offerings, all products have been certified carbon neutral since 2020, representing the only cradle-to-grave carbon-neutral offering of its kind, while the Dekton plant recently received zero waste certification.

Outside of product manufacturing, our headquarters in Almeria, Spain, has the largest ground-mounted self-consumption photovoltaic plant in the country with nearly 37,000 solar panels, and we are working on placing more solar panels on the roofs of each of our factories to further lower energy consumption. This plant generates enough megawatts per year to cover

Lapitec: Lapitec does not include any resin or oil derivatives, nor does it have any digital prints on its surface, which other materials use to imitate the effect of natural stone. Lapitec is created using exclusive technology: The process involves vacuum vibrocompression, joining feldspar mineral grains together without using binding resins, and then sintered at high temperatures. This results in a Lapitec slab that contains no crystalline silica. Lapitec is also manufactured with 15% pre-consumer recycled content, and all the water used during the production process is fully recycled and reused.

36 • Vol. 16 / Issue 2 • International Surface Fabricators Association
Lapitec slabs contain no crystalline silica and they’re manufactured with 15% pre-consumer recycled content. All the water used during the production process is fully recycled and reused.

SUSTAINABILITY MATTERS

CTAS: It’s clear you’ve been investing in sustainable products, processes and concepts, demonstrating your commitment to sustainability as a manufacturer. What are the driving forces behind your initiatives? For example, is sustainability viewed as a department with a function, such as marketing or logistics, or is sustainability a core value woven into all aspects of your organization where environment and products are just some of the yields for the focus?

Corian Design: Our long corporate commitment to sustainability drives us. Our sustainability strategy is grounded in our purpose to empower the world with the essential innovations to thrive, and inspired by the United Nations Sustainable Development Goals (U.N. SDGs). We’ve designed our nine 2030 Sustainability Goals to be challenging—to provoke technical breakthroughs and new ideas for addressing society’s biggest challenges while also addressing the material sustainability topics most relevant to our stakeholders.

Cosentino: Sustainability is woven into every aspect of our business, and we believe every employee at Cosentino plays a huge part in our sustainability progress. For us, it is more than just a trending topic. We base our development on respect for the environment and sustainability, and our ongoing corporate commitment to society and the local communities where we operate. We’ve been working hard to lessen our environmental impact for many years and plan to continue.

Lapitec: We’re currently working with our parent company, Breton, to document our efforts within a third-party verified sustainability report. All divisions are involved in this process, and a specific team has been created to commit to this goal. The core of the material itself is rooted in the very concept of using only sustainable minerals.

CTAS: How do you connect your sustainability story with fabricators and specifiers? What is the perceived value for fabricators to partner with you BECAUSE of your sustainability?

Corian Design: Our partnerships enable fabricators to leverage our knowledge of product stewardship and best practices for product recycling, reuse or renewal. These practices are not only cost-effective but also look at a long-term view of inherent customer benefits by reducing landfill waste where possible.

Cosentino: Our industry partners are very aware of our environmental initiatives and the competitive advantage it brings. In fact, each year, we bring together our partners in manufacturing and processing to discuss the latest innovations and how we can better the future of the industry together at our annual C.Next Fabricators Summit. We also provide educational workshops and training.

Sustainability is the future and something we as an industry must consider throughout the entire process, from manufacturing to fabrication. Our innovative technologies, like HybriQ and Quick Cut, allow us to deliver high-performance, sustainable products with beautiful designs. And as mentioned above, these sustainable innovations also allow for more safety in the industry. Silestone made with HybriQ Technology drastically reduces the percentage of crystalline silica in the product’s composition, creating a new product category. Cosentino is the only manufacturer that has invested in and worked for years toward this achievement, which transforms the composition of Silestone.

As more customers seek out and value sustainably made products, our partners know they don’t have to compromise with Cosentino.

Lapitec: Our sustainability story is deeply rooted in our products since Lapitec is completely inert and does not release any substance into the environment where it is fabricated and installed. Specifically, the fact that Lapitec is silica-free is an actual value for our fabricators since it’s a step toward improving their safety in the workplace, given the problems created by other materials that do contain this harmful mineral.

CTAS: If a group of fabricators who invested in and prioritized sustainable fabrication existed, how do you envision your company’s alignment with this group? Would it be valuable to you to connect with such a group to further your sustainability story and encourage alignment and optimization via the enterprise chain through to the installation of your products and values?

Corian Design: We have a long history of association with industry-leading organizations with an environmental focus. Corian Solid Surfaces would assess any new certification opportunities or organizational startups to determine whether the goals and values align with the Corian business and the larger

International Surface Fabricators Association • Vol. 16 / Issue 2 • 37

SUSTAINABILITY MATTERS

Cosentino’s industrial park and self-consumption photovoltaic plant, which is one of the largest in Europe.

DuPont corporate environmental and sustainability goals to determine if involvement makes sense.

Cosentino: Just as we value the sustainability certifications for our products, we would value this type of certification in our partners. It is important to partner and collaborate with other industry leaders whose sustainability goals are aligned with ours. However, we do want to distinguish that while these specific designations are important, our goal is to ensure that the fabricators, manufacturers and specifiers aim to lower their carbon footprint across all business areas. That’s why Cosentino is helping to push the architecture and design industry to become more aware of their sustainability practices as a whole.

Lapitec: The product life cycle is reversible, meaning that the material may potentially be destroyed and turned back into powder — back into a raw material — and be able to be reused again in the production process. Having forward-thinking fabricators understand and convey this message while educating their clientele and partners on this could help influence the industry so that we are all moving in the same direction.

The last 25 years have seen several cycles of sustainability knocking at the industry’s door, only to have the momentum somewhat fade away until the next renaissance. What we see now, in 2023, is a movement that is not fading away; in fact, we have a zenith of impact, and this includes everything from eco-friendly products to manufacturers supporting zerowaste initiatives to manufacturers not only incorporating but proudly touting the use of renewable energies, and whose manufacturing environments are built and operating on firm sustainable pillars. This spinning wheel of holistic sustainability seems to be getting strong traction.

A A

Jessica McNaughton serves as president at CaraGreen, a provider of sustainable building materials, including many alternative surfacing materials. She has 20 years’ experience in sales, marketing, business development and strategy. Previously the director of sales and marketing at CaraGreen, Jessica has maintained her status as a LEED Accredited Professional since 2009 and she hosts a podcast, Build Green Live Green. She can be reached at jessica@caragreen.com.

B B B B International Surface Fabricators Association • Vol. 16 / Issue 2 • 39

2 2 2 D V

A chain is as strong as its weakest link. To that end, as manufacturers help set the bar for sustainability in the surfacing industry, supporting their efforts throughout the enterprise chain is compulsory for true success — actions that match the message. It’s about creating a reality where fabricators strengthen the sustainability chain by embracing the eco-friendly products offered, and proactively investing and deploying holistic, sustainable initiatives in their businesses. Like a tree in early spring, these fabricators help bud a new LEEF — a high-profile, sustainable fabrication business whose integrated and aligned role is essential for alignment and continuity. C C C C
Paul “Max” Le Pera is the president and founder of Proprietary Ventures LLC, a boutique-style global firm devoted to researching, discovering and deploying disruptive and sustainably oriented proprietary products and technologies. He serves on the ISFA board of directors as vice president of standards. He can be reached at paul.l@ proprietaryventures.com.

Adobe Walls Stoneworks

Owner Justin Howe got his start in residential construction, where he quickly identified a niche in countertops. Unsatisfied with the quality of countertops coming from his local market, he opened Adobe Walls Stoneworks (AWS) in 2003. Located in Amarillo, Texas, AWS is now the largest full-service countertop fabricator in the Texas Panhandle. With steadfast commitments to a quality product, its customers and employees, AWS strives for success with excellence at every step of the process.

Today, with the help of Sales Manager Torie Garrard, Operations Manager Micah Neely and Production Manager Mario Robles, General Manager Chris Sturdevant stands at the helm while Justin pursues other businesses in his portfolio. With 30 years of experience in management and sales, including 10 years in residential and commercial

Some members of the Adobe Walls Stoneworks team accept the 2022 Remodeler of the Year award from the Texas Panhandle Builders Association. From left to right: Greg Howard, commercial estimator; Jeebs Holguin, template manager; Jenny Lemley, sales and design specialist; Torie Garrard, sales manager; Sarah Young, outside sales and event coordinator; Mario Robles, production manager; and Chris Sturdevant, general manager.

40 • Vol. 16 / Issue 2 • International Surface Fabricators Association
FABRICATOR PROFILE

building, Chris has the background needed to run a successful operation. “We have weekly meetings to keep Justin informed on what’s going on here,” clarified Chris. “But for the most part, Justin trusts us because we’ve got a proven track record of growing the business year over year.”

Designated Remodeler of the Year in 2022 by the Texas Panhandle Builders Association, AWS covers a radius of 120 miles around Amarillo. They have two locations, including a fabrication center and the only indoor stone gallery in the area. AWS spares no expense by employing fully automated, computerized fabrication equipment and the latest laser technology for templating. They also carry the region’s largest selection of natural and engineered stone. On average, they fabricate about 1000 square feet of material per week.

Building a Team

AWS has 24 employees, most of whom have been on staff for five years or more. They use incentive programs to reward their employees for going the extra mile. The sales team operates on a base salary plus commission, and the fabricators also have a bonus program. On top of their base wage, they get a bonus per square foot cut. There are dry-erase boards throughout the shop that keep track of the number of days without a mistake. “They get to 30 days, and we have a

AWS is committed to the well-being of its employees with extensive training and safety programs. “Every Monday morning, we do a safety review,” said Chris. “There’s a safety program we follow that includes tooling, protective gear, heavy lifting — you name it. Then we do a Q&A to ensure everyone knows the right way to do things.”

cookout,” explained Chris. “It makes the team very conscious of what they’re doing. The fewer mistakes they make means, the more I can pay them.”

In the Shop

Current equipment includes a SaberJet XP 5-axis CNC saw, a Focus CNC bridge saw, a Titan 2800 CNC router and a Fastback II Edge Polisher — all from Park Industries. They

International Surface Fabricators Association • Vol. 16 / Issue 2 • 41 FABRICATOR PROFILE
AWS works primarily with granite, quartz, marble, quartzite, soapstone and solid surface, and they’re bringing in porcelain slabs. AWS has 24 employees, most of whom have been on staff for five years or more. They use incentive programs to reward their employees for going the extra mile.

also use Laser Products Industries’ LT2D3D Templator, SlabSmith’s Digital Imaging software system, and CounterGo by Moraware for estimating and scheduling.

“The SaberJet is the workhorse,” clarified Chris. “And the Focus is our backup saw, usually during high production season. The laser templator allows us to take accurate measurements and program the equipment to cut a tight-fitting finished product. The SlabSmith Digital Stone Image system enables us to have excellent pattern and vein match on waterfalls and full-height backsplashes, and it shows our customers multiple layout options.”

Regarding sustainable practices, they try to improve their processes and eliminate waste, including a custom water treatment system. “We have a strong commitment to the environment,” said Chris. “We recycle 100% of the stone waste by crushing it to an aggregate for roadways and landscaping.”

Safety First

AWS is committed to the well-being of its employees with extensive training and safety programs. They have a training syllabus for all new hires, and it provides context around

various materials and their properties, fabrication techniques and safety protocol. When new employees start, they shadow an expert to learn the ropes.

“Every Monday morning, we do a safety review,” said Chris. “There’s a safety program we follow that includes tooling, protective gear, heavy lifting — you name it. Then we do a Q&A to ensure everyone knows the right way to do things.” Chris says that reviewing basic safety measures repeatedly helps to keep safety top of mind for everyone in the shop. “Last year, we only had one reportable injury, a cut,” he admitted. “And we’re pretty proud of that. Not only is it the right thing to do for the welfare of our employees, but it keeps productivity high while keeping workers’ compensation claims to a minimum.”

International Surface Fabricators Association • Vol. 16 / Issue 2 • 43 FABRICATOR PROFILE
Chris says the larger displays in the AWS showroom give customers a better idea of what they’re purchasing than if they were browsing a catalog or looking at 12-inch samples. AWS has a 12,000-square-foot indoor stone gallery, the only indoor showroom in the region. It’s a luxury space with more than 30 A-frames that display various materials and a four-slab butterfly feature wall. The AWS showroom also includes over 30 sinks, 100 faucets and 200 tile samples. Chris says the showroom has increased their average sale. “It’s a beautiful, high-end, high-functioning space that has paid off for us.”

Materials and Offerings

AWS works primarily with granite, quartz, marble, quartzite, soapstone, and solid surface, and they’re bringing in porcelain slabs. They also offer a large selection of ceramic and stone backsplash tile, sinks and faucets. They don’t sell cabinets — they subcontract it out — but they do sell the hardware. They also offer repair and restoration work and a 15-year sealer warranty on stone.

“We purchase materials differently than most,” said Chris. “Our sales manager, Torie, is very cognizant of what’s selling and what’s popular, and she goes on buying trips frequently throughout the year to places like Austin, Dallas, or Oklahoma City.” They generally buy four or five truckloads of material on each trip. This allows AWS to get the best possible prices and terms and pass the savings on to their customers.

Their inventory is usually about 65% stone, 25% marble, and 10% engineered materials, including quartz. “We try to keep about a million dollars of inventory on hand or order,” clarified Chris. “We like 120-day terms from our vendors, and hopefully, we can sell it before paying for it.” If something has been in the showroom for more than 120 days, they change its location to be more prominently displayed, then discount it or offer a 5% rebate to keep the stock moving.

They’re seeing a lot of interest in higher-end materials and add-ons like full-height backsplash, waterfalls and laminations. Quartzites are popular options, with Taj Mahal leading by a wide margin. “Five years ago, a $4,000 slab was top of the mark for us,” he recalled. “Now we’re stocking everything from builder-grade

granite to high-end quartzite slabs. Engineered stone, including quartz, is getting more attention than ever. “I think it has more to do with increased customer awareness and a post-COVID zeal for a well-lived life.”

While offering a wide selection benefits their customers, the downside is that some materials are difficult to work with. “For example, the quartzites are super hard,” explained Chris. “If you’re working with marble, your blade will last three to four months. For quartzite, the blade will last three or four jobs.” When fabricating multiple materials, Chris says that scheduling is critical. They keep their Focus saw set up just for cutting granite, and most of the time, they have a quartzite blade on the waterjet saw, so they don’t have to change the blades throughout the day.

Going to Market

AWS is about 85% residential and 15% commercial. They have an outside sales representative who targets residential builders and a commercial sales representative who works with general contractors. To keep their brand top of mind, they run television commercials, and they are active on social media. But Chris says that their long-standing success in the marketplace positions them as a top choice for remodeling services.

The AWS sales approach doesn’t rely on upselling. “We sell to the need; if a customer has a property flip, we’ll sell them a builder-grade material, stainless steel sink and a basic faucet. Transitional house? Nice but neutral. Forever home? We help them get what they want within their budget.”

44 • Vol. 16 / Issue 2 • International Surface Fabricators Association FABRICATOR PROFILE
This kitchen island features Arctic White Quartz over Wakanda Quartzite. In addition to being hard material, the Wakanda Quartzite has a flowing pattern and the customer wanted the flow to wrap around the top and sides. MSI’s Calacatta Statuario Quartz is the focal point of this residential kitchen. The experts at AWS made sure the vein pattern matched perfectly.

FABRICATOR PROFILE

The AWS sales team educates customers about their purchase and how it might impact the value of their home. “For example, most people don’t know what they should spend on countertop replacement,” explained Chris. “They want to spend as little as possible, but that can backfire on more expensive homes, so we did some research and figured out that in our area, about 5% of the value of a home is a good cost basis. A $100,000 home justifies a $5,000 kitchen. This works up to about a $500,000 home. The point is, if they put a $25,000 kitchen in the $100,000 home, it will only increase the market value by the same amount as a $5,000 kitchen, and if they put a $5,000 kitchen in a $300,000 home, it will actually decrease the home value. It helps them make better decisions.”

AWS sells by the slab instead of by the square foot. When they quote a price, it includes the material, templating, fabrication, installation and supplies. “Add-ons are sinks and faucets because you can spend a little or a lot,” explained Chris. “Our customers like our pricing because it’s transparent. We inform them about the material waste, which is generally 10%-15%, and we will fabricate offal to create window sills, trivets, table toppers and other small items. Sometimes there’s enough material for a powder bath top.”

If the customer doesn’t need the offal and the piece is large enough, it’ll go on the remnant rack. Remnants are the only thing they sell by the square foot, and since the material is already paid for and out of inventory, the only cost is labor.

AWS runs on good old-fashioned honesty. By educating their customers and selling to their needs, they build trust. “We do kitchens from about $3,000 to over $100,000,” said Chris. “But they’re all sold, scheduled, measured, fabricated and installed the same way, with the same care.”

A State-of-the-Art Showroom

AWS has a 12,000-square-foot indoor stone gallery, the only indoor showroom in the region. It’s a luxury space with more than 30 A-frames that display various materials and a four-slab butterfly feature wall. “The larger displays give the customer a better idea than if they were looking at 6- or 12-inch samples,” he clarified. The AWS showroom also includes over 30 sinks, 100 faucets and 200 tile samples. Chris says the showroom has increased their average sale. “It’s a beautiful, high-end, high-functioning space that has paid off for us.”

In addition, the showroom features a working kitchen which allows them to host cooking classes, wine tastings and other networking events such as the local builder’s association monthly Beer With A Builder and the Chamber of Commerce’s Business After Hours events. “Most recently, we held an event that raised $10,000 for a local group that provides coats, hats and gloves to the

less fortunate,” explained Chris. “These events get anywhere from eight to 150 guests through our door who fit our customer profile.” AWS’ average sale is about $10,000. If you do the math on the investment on the events ($1,000-$2,000) and the leads generated, the return on investment is extraordinary.

Ultimately, investing in the local community is a win-win situation for AWS. They’re helping organizations to fundraise while donating space and shouldering the cost of the event. In return, they get potential customers in the door.

Staying Connected

AWS is relatively isolated geographically, so they rarely attend trade shows or conferences, but they share best practices and work closely with local designers and builders. Subscribing to design and construction magazines keeps them ahead of trends. They follow Stone Fabricators Alliance on Facebook for some industry trends and work tips, and they are members of the International Surface Fabricators Association (ISFA). “Our fabricators attended ISFA’s solid surface training last year, which we needed to expand our commercial fabrication channel since that specifies a lot of solid surface,” said Chris. “The training was terrific, and we’re grateful for trade associations and how they support us in our work.”

Aspirations As Big As the Texas Sky

What’s next for AWS? Chris has strategic plans in place that aim to double the current sales volume within the next few years. With goals to expand the fabrication center to include additional storage capacity and functionality, the Texas sky’s the limit for this fabricator. C

Learn more about AWS at www.adobewallsstoneworks.

International Surface Fabricators Association • Vol. 16 / Issue 2 • 45
C C
A A B B B 2 2 2 V V V
A
AWS runs on good old-fashioned honesty. By educating their customers and selling to their needs, they build trust. “We do kitchens from about $3,000 to over $100,000,” said Chris. “But they’re all sold, scheduled, measured, fabricated and installed the same way, with the same care.”

Survey Says

As a kid, I always enjoyed watching the game show Family Feud; I loved playing along and was always intrigued by the responses to the questions. While the questions were often obscure, seeing what most people said was fascinating.

Fast forward to today, and I’m still interested in viewpoints and perspectives of all kinds and the rate at which data surfaces. It’s everywhere and easily accessible. As a kid, I had to search through volumes of encyclopedias or visit the library to find a resource. Today we have the almighty internet that hosts an endless amount of information. Frankly, it’s overwhelming how much data we have at our fingertips.

So what does my current search history include? Besides the best pasta near Olympia, Washington, you’re most likely to find things relating generically to the surfacing industry. For example, what is the average response time to close a sale? And the survey says customers expect a response in 10 minutes, but the average response time is 47 hours. Yikes!

Another question: What’s the best day to respond to a lead? The survey says Thursday. Another startling fact is that somewhere between 27%-47% of leads never get contacted at all. A study by the Harvard Business Review suggests that sales teams that take 24 hours to respond are 60 times less successful than teams that respond within an hour. Why the delay? Is it efficiency, time management, cross-training, lack of availability, or lack of process?

According to the American Institute of Stress, 83% of U.S. workers suffer from work-related stress, and 25% say their job is the number one stressor in their lives. Does your sales team — or any team for that matter — have the bandwidth they need to balance it all? More work does not mean more success; in this case, more is less. With a labor shortage that persists, managers are combining roles, adding tasks to an already packed day, and in the end, it’s a short-term strategy that perpetuates a long-term problem. Burnout is real!

Tim Saddoris, the owner of Grand Onyx, discussed using tech to help solve staffing solutions for ISFA at TISE, and he wrote an article about solving staffing shortages in the last issue of this magazine. He pointed out that according to Gallup, the

three things today’s generation of incoming workers want from a potential employer are:

• A significant increase in income or benefits.

• Greater work-life balance and better personal well-being.

• The ability to do what they do best.

This information aligns with MIT’s study, which says culture is the number one predictor of employee attrition and that lateral career opportunities are 12 times more predictive of employee retention than promotions. People like to learn new things, change the setting and freshen their perspectives. It doesn’t have to mean more money, but it could mean more inspiration to stick around and find fulfillment at your company.

So maybe the answer isn’t first in attracting more staff, but finding ways to better engage the ones you have, understand what they need to flourish, consider it a partnership and foster two-way communication and mutual respect. Create boundaries for your employees so that they can focus and thrive. To the next generation of our workforce, boundaries are critical.

On the other hand, you might consider stretching some of your boundaries as a manager. According to Zippa, 97% of countertop fabricators are male. What are you doing in your shop to create more inclusivity and diversity, and are you missing out on an opportunity by not prioritizing it? ISFA is taking steps to promote and empower women in our industry through the launch of a women’s leadership group, Women Who Rock. Survey says prioritizing inclusivity and diversity in your shop could lead to valuable opportunities.

While ISFA continues to stay at the forefront of the decorative surfacing industry, we do our best to stay ahead of your difficulties and provide experts that can coach you toward solutions. Whether it’s sales strategies, hiring and onboarding, efficiencies in workflows, or safety, we’re providing ways in which you can learn new methods and troubleshoot your business. Your ISFA membership gives you access to resources, programs and events that can elevate your success. Join us for the next webinar or roundtable event, listen to the podcast, or attend the Annual Conference in October. Find your path to success at ISFAnow.org.

Reach me any time at Nancy@ISFAnow.org.

46 • Vol. 16 / Issue 2 • International Surface Fabricators Association
PERSPECTIVES

ISFA’s Fabrication Training Sessions Draw Attendees to Tennessee, Texas

ISFA members gathered in late February in Knoxville, Tennessee, for a mineral surfaces training event to participate in hands-on fabrication instruction and demonstrations. A rising category, mineral surfaces include porcelain, sintered and ultra-compact materials. Expert trainer Alexandre Stepanov was on hand to guide the course and provide best practices for successful fabrication.

To kick off the event, BB Industries hosted the group for strategy and informational sessions at their headquarters. The group also toured local fabricator Smokey Mountain Tops and got a firsthand look inside Crossville Tile’s automated manufacturing center in nearby Crossville, Tennessee.

At Crossville Tile, attendees were introduced to the porcelain tile manufacturing process, from combining the initial ingredients like sand and other materials to curing the raw tiles in a long, hot kiln, to how the product is packaged and stored. The tour group also learned about Crossville’s recycling process.

“This hands-on learning and training opportunity was a creative way for fabricators to learn more about some of the most popular surfaces today,” said BB Industries CEO Rick Stimac. “We were glad to host the group and get to see both some familiar and new faces at our offices. Partnering with Smokey Mountain Tops and Crossville offered the group an educational and fun experience. We appreciate

everyone involved, including trainer Alexandre Stepanov and ISFA, for including BB Industries in this great learning experience.”

“ISFA is dedicated to delivering the tools and resources fabricators need to find success,” added Nancy Busch, executive director of ISFA. “Providing opportunities to learn more about mineral surfaces, a rising category in terms of popularity, is just one of the ways we arm our members with ways to grow their businesses. Thanks to our partners, BBI and Crossville and Smokey Mountain Tops, for making this event a terrific success.”

In addition to mineral surfaces training in February, ISFA hosted a sold surface training event in March in San Antonio. Sponsored by Aristech Surfaces, the hands-on, two-day session provided attendees with the skills and knowledge in all facets of the fabrication process, including layout, templating, seaming, support, sanding, edges, cutouts, backsplashes, thermoforming, finishing and installation. Participants completed a vanity application which includes an integral bowl sink, built-up edge profile, edge inlay, and examples of coved and set-on style backsplash.

Additional training events are scheduled for the following dates:

Solid Surface Fabrication Training

• June 6-7, Lakewood, Wash.

• August 8-9, San Antonio

Mineral Surfaces Fabrication Training

• September 13-14, Massillon, Ohio

ISFA also provides on-site training upon request for those fabrication companies seeking to train multiple staff members. ISFA will bring the trainer, materials and some tools to any fabrication company in North America that signs up for the on-site option. In 2023, ISFA has scheduled or completed more than 10 onsite sessions serving fabricators from California to Rhode Island.

Anyone interested in ISFA’s training program can find more information at www.ISFAnow.org.

International Surface Fabricators Association • Vol. 16 / Issue 2 • 47 ISFA NEWS
Students at a recent on-site solid surface fabrication training event work to complete their hands-on project. Mineral Surfaces Trainer Alexandre Stepanov leads the training course in Knoxville, Tenn.

Keep Palm and Carry On: Join ISFA in the Caribbean for the 2023 Annual Conference

Fabricators and other professionals within the decorative surface industry are invited to explore growth opportunities at the 2023 ISFA Annual Conference, which will be held October 16-19 on the Caribbean island of Sint Maarten. Attendees will enjoy four days of educational sessions, business development workshops, networking opportunities and more at the stunning Sonesta Ocean Point Resort.

Fabricator-Focused Programming

This year’s conference will include discussions focusing on creating efficiencies, including improving productivity and streamlining operations. Additional sessions will cover ways to strengthen leadership, and the importance of fostering a positive company culture to attract and retain employees during what proves to be one of the most challenging skilled labor markets the industry has seen.

This signature event will kick off with a welcome reception and dinner amid idyllic views of the sand and sea. The first night will conclude with a celebration that honors the 2023 ISFA Award recipients and the introduction of ISFA’s 2024 board of directors.

In subsequent days, attendees will benefit from powerful presentations, discussions and workshops focusing on strategies to strengthen your business. Topics

include leadership approaches that impact all sides of a business, onboarding and optimizing modern technologies and tools to improve production, shop efficiency tactics, and creating a strong and positive company culture. The programming is curated to benefit fabrication companies of all sizes and scopes.

In between workshops and presentations, attendees can network with their peers over great food, entertainment and a breathtaking resort backdrop that enables everyone to kick back, relax and enjoy each other’s company. Sharing experiences and learning from one another in conversation continues to be a cornerstone of ISFA.

“The ISFA Annual Conference is the pinnacle event for our members, and this year’s event promises to be exceptional,” said Nancy Busch, executive director of ISFA. “We have thoughtfully planned programming and resources that will bring value and growth opportunities to attendees, which adheres to ISFA’s mission to further the decorative surface industry and support fabricators in their work.”

The 2023 ISFA Annual Conference is proudly sponsored by Dal-Tile, Aristech Surfaces, BB Industries, Caesarstone, Cosentino, Durasein, Infinity Surfaces, Integra Adhesives, Laser Products Industries, LX Hausys, Kohler and Park Industries. These companies, together with ISFA, are dedicated to the success of surface fabricators everywhere.

About the Resort

Chic and sustainable, the all-inclusive Sonesta Ocean Point Resort embraces a uniquely designed contemporary Caribbean style. The spectacular 130-suite resort-within-a-resort features an array of pools, bars and dining experiences, including the signature Azul Restaurant as well as 24-hour room service, wellness treatments, a fitness center and more.

A dazzling all-inclusive entertainment program engages guests with our team of talented performers, creating a sense of community and connection. Vibrant live music, unique in-resort experiences, a well-being and fitness program, and the island’s largest gaming emporium Casino Royale, all culminate in the most sophisticated retreat in Sint Maarten.

REGISTER NOW

Registration for this event is now open and space is limited. Those interested in attending can find more details at www.ISFAnow.org/annual-conference. Fabricator members who sign up for the event before May 31, 2023, can take advantage of early bird pricing, a savings of $250 off registration fees. Registration fees include accommodations, meals and programming.

International Surface Fabricators Association • Vol. 16 / Issue 2 • 49
ISFA NEWS

Thank You and Welcome ISFA Members (In alphabetical order)

NEW FABRICATOR MEMBERS

Absolute Acrylics

Lubbock, Texas

Chesapeake Specialty Services

Fallston, Md.

Cinnabar

Los Angeles

City of Valdez

Valdez, Alaska

5280 Stone Company

Frederick, Colo.

Alpha Granite

Austin, Texas

Atlanta Kitchen, Inc.

Decatur, Ga.

Atlantic Countertops

Raleigh, N.C.

Bangor Wholesale Laminates

Bangor, Maine

Bella Casa Countertops and Stone

Littleton, Colo.

Carolina Stoneworx

Knightdale, N.C.

Creative Countertop Solutions, Inc.

Nashville, Tenn.

Cutting Edge Surfaces

Dawsonville, Ga.

Douglas County Government

Castle Rock, Colo.

Granite Direct

Wales, Wis.

Integrated Manufacturing

Tamuning, Guam

Italian Marble & Granite, Inc. Clarence Center, N.Y.

Luxury Marble and Granite

Staten Island, N.Y.

Princeton University Facilities Services

Princeton, N.J.

Rock Solid Marble and Granite

Sheffield, Mass.

Rosskopf + Partner

Nottertal-Heilinger Hohen, Germany

Scan-Top, Inc.

Redwood City, Calif.

RENEWING FABRICATOR MEMBERS

Cutting Edge Countertops, Inc.

Perrysburg, Ohio

Ellis Page Company, LLC

Manassas, Va.

FLOFORM Countertops

Winnipeg, Manitoba

FLOFORM Countertops

Edmonton, Alberta

FLOFORM Countertops

Saskatoon, Saskatchewan

FLOFORM Countertops

Kent, Wash.

Counter Intelligence

Wasilla, Alaska

Galaxy Granite & Marble, Inc.

Hopkinton, Mass.

GFL Benchtops Limited

Auckland, New Zealand

Granite Accents, Inc.

Sioux Falls, S.D.

HardCo, Inc. Classic Cabinetry

Ardmore, Ala.

Henry H. Ross & Son, Inc.

Lititz, Pa.

Heyboer & Bolt, Inc.

Wyoming, Mich.

Humboldt Countertops

Fields Landing, Calif.

Innovative Surfaces, Inc.

Hastings, Minn.

IntelliStone

Franklin, Tenn.

2023 ISFA BOARD OF DIRECTORS

Austin Maxwell, president Maxwell Countertops (309) 928-2848

Austin@maxwellcounters.com www.maxwellcounters.com

Laura Grandlienard, vice president ROCKin’teriors (919) 577-0207

L aura@rockinteriors.com www.rockinteriors.com

Jessica McNaughton, secretary CaraGreen (919) 929-3009

Jessica@caragreen.com www.caragreen.com

Ted Sherritt, treasurer FLOFORM Countertops (204) 474-2334

Tsherritt@floform.com www.floform.com

Joe Duszka, immediate past president Carolina Custom Surfaces (336) 215-5518

Joe@carolinacustomsurfaces.com www.carolinacustomsurfaces.com

Top Shelf Contractor/Bentley

Construction

Vancouver, Wash.

White Construction Services

New Braunfels, Texas

Zean Century Stone, Ltd.

Scarborough, Ontario

Kootenai Hospital

Coeur D’Alene, Idaho

Lincoln Laminating

Lincoln, Neb.

McDermott Top Shop

Jefferson, Wis.

Melling Granite

Cedar City, Utah

Natural Stone Countertops

Huntsville, Ala.

Pierce Laminated

Products, Inc.

Rockford, Ill.

Precision Countertops, Inc.

Wilsonville, Ore.

Stone Concepts, Inc.

Omaha, Neb.

Surface Providers

Alpharetta, Ga.

Tex-San Granite

Boerne, Texas

The Countertop Shop

Monclova, Ohio

The Granite & Marble Depot, Inc.

Aurora, Ill.

Unique Countertops

Buda, Texas

University of North Carolina Chapel Hill, N.C.

White House Stone Lake Park, Fla.

Mike Henry, director ASST

(717) 451-4935 mikehenry@asst.com www.asst.com

Kimberly Homs, director Great In Counters (401) 233-0666

Kimberly@greatincounters.com www.greatincounters.com

Paul “Max” Le Pera, director Global Surfacing Alliance (908) 358-5252 pmlp33@gmail.com

Steve Mast, director Precision Countertops (503) 660-3023

Steve.m@precisioncountertops.com www.precisioncountertops.com

Travis McDermott, director McDermott Top Shop (262) 593-2456

Travis@mcdermotttopshop.com www.mcdermotttopshop.com

Mike Schott, director Onslow Stoneworks (252) 393-2457

mike.schott@onslowstoneworks.com www.onslowstoneworks.com

Eric Tryon, director The Rockheads Group (678) 614-7111

Tryonea@gmail.com www.rockheadsusa.com

Rodrigo Velazquez, director INDEKO

52 331-028-7863

Rodrigo@weareindeko.com www.indeko.mx

Jim Callaghan, assoc. member rep. GranQuartz (248) 660-3291

Jcallaghan@granquartz.com www.granquartz.com

Frank Sciarrino, assoc. member rep. Quote Countertops (858) 499-8934

frank@quotecountertops.com www.quotecountertops.com

50 • Vol. 16 / Issue 2 • International Surface Fabricators Association
ISFA NEWS

THANKS TO OUR 2023 SPONSORS

Sponsorship opportunities are available for qualifying manufacturers, distributors and other industry-related companies. These businesses are dedicated to the success of the International Surface Fabricators Association and fabricators everywhere. Through their contributions, sponsors enable ISFA to create meaningful opportunities for its membership including training, education, business development, networking and more.

ISFA

P.O. Box 627

Ingomar, PA 15127

(888) 599-ISFA

www.ISFAnow.org

Executive Director

Nancy Busch (253) 691-0169

Nancy@ISFAnow.org

Fabricator Member Services

Carol Wilhite (412) 487-3207

Carol@ISFAnow.org

Member Experience Coordinator

Samantha Winslow

(888) 599-ISFA

Samantha@ISFAnow.org

Content Manager | Editor

Sarah Peiper

(888) 599-ISFA

Sarah@ISFAnow.org

Web/Database Administrator

Amy Kyriazis (412) 487-3207

Amy@ISFAnow.org

Administrative Assistant Kanani Camacho (888) 599-ISFA

Kanani@ISFAnow.org

ISFA NEWS
PLATINUM
SILVER GOLD
ISFA CONTACTS

ISFA ASSOCIATE MEMBER DIRECTORY

Companies listed in red are ISFA 2023 Sponsors

AAA Adhesive

2020 Wild Acres Rd., Bldg. D

Largo, FL 33771

877-422-4583

www.aaaglue.com

ACS International 4775 S. 3rd Ave.

Tucson, AZ 85714

520-889-1933

www.acstone.com

Aetna Plywood Inc.

1401 St. Charles Rd. Maywood, IL 60153

708-343-1515

www.aetnaplywood.com

Akrilika Svobody Str., 29 Moscow 125362

Russian Federation

79119451961

www.akrilika.com

Al-Badaha Company for Modern Industries

P.O. Box 126444

Jeddah 23643

Saudi Arabia

966920002964

www.albadaha.com

Alf Noon for Modern Kitchen Co.

P.O. Box 54210

Al Raboua, Sari St. Beside the Municipal Airport

Jeddah 21514

Saudi Arabia

966 12 275 2309

Andres O’Neil & Lowe 212 N. Defiance St.

Archbold, OH 43502

419-636-5050

www.andresoneilandlowe.com

Aristech Surfaces

7350 Empire Dr. Florence, KY 41042

859-283-1501

www.aristechsurfaces.com

BACA Systems

101 Premier Dr. Orion Township, MI 48359

248-791-3060

www.bacasystems.com

BB Industries, LLC

4100 Appalachian Way Knoxville, TN 37918

800-575-4401

www.bbindustriesllc.com

Better Vacuum Cups, Inc.

13841 Roswell Ave., Ste. K Chino, CA 91710

877-379-9909

greenbvc.com

Breton S.p.A. Via Garibaldi, 27 Castello di Godego 31030 Italy

3904237691

www.breton.it/en/

Broadcreek Marketing Associates

16411 Carmenita Rd. Cerritos, CA 90703

Bronwick Recruiting

7700 Basil Dr. Austin, TX 78750 512-981-5294

www.bronwick.com

Caesarstone US

1401 W. Morehead St. Charlotte, NC 28208

818-378-2667

www.caesarstoneus.com

Cambria USA

31496 Cambria Le Sueur, MN 56058

507-665-5003

www.cambriausa.com

CaraGreen, Inc.

1406 Transport Dr. Raleigh, NC 27603

919-929-3009

www.caragreen.com

CH Briggs Company

2047 Kutztown Rd.

Reading, PA 19605

800-355-1000

www.chbriggs.com

Chemcore Industries, Inc.

5311 Fleming Ct.

Austin, TX 78744

866-243-6267

www.chemcor.com

Chemical Concepts, Inc. 410 Pike Rd.

Huntingdon Valley, PA 19006

800-220-1966

www.chemical-concepts.com

Chintan Corporation

901, Mauryansh Elanza

Shaymal Cross Rds. Satellite Rd. Ahmedabad 380 015 India

9825023859

www.neonnex.in

Colonial Saw 122 Pembroke St. Kingston, MA 02364 781-585-4364

www.csaw.com

Cosentino USA

355 Alhambra Cir., 10th Floor Coral Gables, FL 33134 786.812.0509

www.cosentino.com

Countertop Marketing Co. 402 Pequot Ave. #772 Southport, CT 06890 203-993-6676

www.countertopmarketingco.com

Covia Corp

9930 Kincey Ave., Ste. 200 Huntersville, NC 28078 800-243-9004

www.coviacorp.com

Crossville Inc. 349 Sweeney Dr. Crossville, TN 38555 931-456-2110

www.crossvilleinc.com

Dafanie Financial Group, LLC 850 Pacific St., Ste. 1162 Stamford, CT 06902 203-666-5560

www.bestburialins.com

Dal-Tile Corporation 7834 CF Hawn Frwy. Dallas, TX 75217 214-309-3162

www.daltile.com

Dixie Plywood & Lumber P.O. Box 2328

Savannah, GA 31402 912-447-7000

www.dixieply.com

Dongguan Kongder Industrial Materials Co. Room 3006-3007, G1 Building Hongtu Rd. Nacheng District, Dongguan Guangdong 523071 China 8613925574811

www.dgkongder.com

Doyle Farris (Bellavati)

6606 FM 1488, Ste. 148-517 Magnolia, TX 77354

859-533-3079

www.doylefarris.com

Duda Consulting 3601 Southwest River Pkwy. Portland, OR 97239

503-949-7738

DuPont (Corian Design) 200 Powder Mill Rd. Wilmington, DE 19803 314-941-5179

www.corian.com

Durasein USA

7030 Quad Ave., Ste. 3 Rosedale, MD 21237 877-771-7712

www.durasein.com

Durcon 206 Allison Dr. Taylor, TX 76574 512-595-8000

www.durcon.com

Dwyer Marble & Stone Supply 23177 Commerce Dr. Farmington Hills, MI 48335 248-476-4944

www.dwyermarble.com

Etemplate Systems (a division of Tri-Tech) 106 Wind Chime Ct. Raleigh, NC 27615 919-676-2244

www.etemplatesystem.com

Evans Midwest 11441 E. Lakewood Blvd. Holland, MI 49424

616-546-8225

www.evansmidwest.com

Evolv Surfaces

1208 Hensley St. Richmond, CA 94801 415-767-4600 #7230

www.evolvsurfaces.com

Fabricator’s Business Coach 309 Gassaway St. Central, SC 29630-9197

864-328-6231

www.fabricatorscoach.com

52 • Vol. 16 / Issue 2 • International Surface Fabricators Association

ISFA ASSOCIATE MEMBER DIRECTORY

Companies listed in red are ISFA 2023 Sponsors

Fabspacetech

D-502, Swapnil Arcade

B/h-Sardar Party Plot

Dastan Circle, Naroda, Gujarat

Ahmedabad 382430 India

919316573047

www.fabspacetech.com

Federal Brace

710 E Catawba St., Ste. A Belmont, NC 28012

877-353-8899

www.federalbrace.com

Fifth Gear Technology (Speed Label)

450 N. Addison Ave. Elmhurst, IL 60126

630-606-8055

www.speedlabel.net

Flexijet North America

11223 Blair Rd.

Charlotte, NC 28227

844-MY-FLEXI

www.myflexijet.com

GEM Industries

5030 N. Hiatus Rd.

Sunrise, FL 33351

954-749-1228

www.gem-industries.com

Gemstone

2040 Industrial Pkwy.

Elkhart, IN 46516-5411

574-294-8899

www.gemstonesinks.com

Gluewarehouse.com

455 W. Victoria St. Compton, CA 90220

www.gluewarehouse.com

Grand Onyx

134 West South Boundary St.

Perrysburg, OH 43551

567-686-1040

www.grandonyx.pro

Granite Gold, Inc.

12780 Danielson Ct., Ste. A

Poway, CA 92064

858-499-8934

www.granitegold.com

GranQuartz

3950 Steve Reynolds Blvd.

Norcross, GA 30093

800-458-6222

www.granquartz.com

Groves Incorporated

818 Trakk Ln. Woodstock, IL 60098

815-337-9780

www.groves.com

Hallmark Building Supplies

901 Northview Rd., Ste. 100 Waukesha, WI 53188

800-642-2246

www.hllmark.com

Hyundai L&C USA

2839 Paces Ferry Rd. Ste. 1100

Atlanta, GA 30339

888-426-9421

www.hyundailncusa.com

IceStone LLC

63 Flushing Ave., Unit 283, Bldg. 12 Brooklyn, NY 11205 718-624-4900

www.icestoneusa.com

Ignite Consulting Group (Hot Sauce Selling Software) 450 N. Addison Ave. Elmhurst, IL 60126

630-606-8055

www.hotsauceyourtops.com

INEOS Composites

5200 Blazer Pkwy. Dublin, OH 43017

614-790-2078

www.ineos.com

Infinity Surfaces Via Giardini Nord 225

P.IVA : 00175990365

Pavullo Nel Frignano Modena 41026 Italy 39 0536 329322

www.infinitysurfaces.it

InfoStream Solutions

134 West South Boundary St. Perrysburg, OH 43551 567-686-1040

www.InfoStreamUSA.com

InnoChem/Akemi

160 Candlewyck Dr. Avondale, PA 19311

www.akemi.com

IPS Adhesives LLC (Integra Adhesives)

455 W. Victoria St. Compton, CA 90220 919-598-2400

www.integra-adhesives.com

Jaeckle Distributors

4101 Owl Creek Dr. Madison, WI 53718

608-838-5400

www.jaeckledistributors.com

Karonia Surfaces

Ansym Lodge, Water Ln. Eggborough, GOOLE

DN14 0PN United Kingdom

447814415724

www.karonia.com

Karran USA

P.O. Box 667

1291 East Ramsey Rd. Vincennes, IN 47591 410-975-0128

www.karran.com

Kohler Co.

P.O. Box 899 Kohler, WI 50344 920-457-4441

www.kohler.com

Krion Solid Surface (Porcelanosa)

CTRA Villareal-Puebla De Arenoso KM1

Villareal 12540 Spain 34964506464

www.krion.com/en/

Laminam

156 State St. Boston, MA 02109 289-924-0394

www.laminamusa.com

Lane Supply Company 2050 West Barberry Place Denver, CO 80204 303-908-9095

www.lanesupplycompany.com

Lapitec Via Bassanese 6 Vedelago, Treviso 31050 Italy

www.lapitec.com

Laser Products Industries, Inc. 1344 Enterprise Dr. Romeoville, IL 60446 630-755-5402

www.laserproductsus.com

LOTTE Chemical

6 Centerpointe, Ste. 100 La Palma, CA 90623 714-443-0901

www.lottechem.com

LX Hausys America, Inc.

900 Circle 75 Pkwy., Ste. 1500 Atlanta, GA 30339

678-535-4113

www.lxhausysusa.com

Marble & Granite, Inc. 270 University Ave. Westwood, MA 02090 781-915-1250

www.marbleandgranite.com

Meganite, Inc. 1461 S. Balboa Ave. Ontario, CA 91761 909-391-8886

www.meganite.com

Moksh Tech #1204, Pushpak Landmark Bldg. Near Titanium City Center Anand Nagar Rd. Prahlad Nagar Ahmedabad - 380 015 India 3012522673

www.mokshcad.com

Moraware 13125 Welcome Way Reno, NV 89511 866-312-9273

www.moraware.com

MSI Surfaces 2095 N. Batavia St. Orange, CA 92865

www.msisurfaces.com

Natural Stone Institute 380 E. Lorain St. Oberlin, OH 44074 440-250-9222

www.naturalstoneinstitute.org

No Lift Install System 30485 S.E. Veterans Blvd. Estacada, OR 97023 503-212-4034

www.noliftsystem.com

NOW1 LLC

4180 Merritt Dr. Cummings, GA 30041

Ollin Stone

301 E. Ball Rd. Anaheim, CA 92805 714-535-0800

www.ollinstone.com

Pacific Shore Stones 10220 Metropolitian Dr., Ste. A Austin, TX 78758 512-568-0649

www.pacificshorestones.com

International Surface Fabricators Association • Vol. 16 / Issue 2 • 53

ISFA ASSOCIATE MEMBER DIRECTORY

The Palmer Group Holdings (Kitchen Design Solutions)

760 King George Blvd., Ste. E Savannah, GA 31419

912-349-2431

www.kitchendesignsolutions.com

Park Industries

P.O. Box 188

St. Cloud, MN 56302

320-251-5077

www.parkindustries.com

Parson Adhesives Inc. (Chromalok)

3345 Auburn Rd., Ste. 107 Rochester Hills, MI 48309

248-299-5585

www.chromalok.com

PinPoint Status

29750 Shaker Blvd. Pepper Pike, OH 44124

216-400-5333

www.pinpointstatus.com

Plastiglas de Mexico SA

Frente a la Estacion del Ferrocarril FFCC

Maciovio Herrera S/N

Ocoyoacac 52740 Mexico

www.plastiglas.com.mx

Poseidon Industries

4080 Duncan Rd.

Punta Corda, FL 33982

Princeton Chemical Company

7030 Quad Ave., Ste. 3

Rosedale, MD 21237

877-778-6878

www.princetonchemical.com

Prodim Systems

7454 Commercial Cir. Ft. Pierce, FL 34951

772-465-4000

www.prodim-systems.com

Pure Surfaces/Basix Surfaces West

16411 Carmenita Rd.

Cerritos, CA 90703

704-702-0441

www.pure-surfaces.com

PWI

7930 W. 1000 N. Nappanee, IN 46550

574-646-2015

www.pwiworks.com

Quote Countertops

11811 N. Tatum Blvd. #3078

Phoenix, AZ 85028

619-726-7660

www.quotecountertops.com

QXM Solutions

4815 E. Carefree Hwy. Ste. 108-297 Cave Creek, AZ 85331 602-760-5032

www.qxmsolutions.com

Regent Stone Products

2656 Quality Ct. Virginia Beach, VA 23454 800-624-8210

www.regentstoneproducts.com

Relang International, LLC, Durasein USA

7030 Quad Avenue, Ste. 3 Rosedale, MD 21237 877-771-7712

durasein.com

Rock Doctor/Apex Products 8333 Melrose Dr. Lenexa, KS 66214 913-894-0288

www.rockdoctor.com

Rockheads Group 815-210-1006

www.rockheadsusa.com

RouterBitsNow

520-954-0534

www.routerbitsnow.com

Sage Surfaces

6700 The Woodlands Pkwy., Ste. 230-303

The Woodlands, TX 77382 837-403-2847

www.sagesurfaces.com

Sasso USA

220 N. Smith St., Ste. 414 Palatine, IL 60067 224-200-8004

www.sassousa.com

Schechner Lifson Corp. 4 Chatham Rd. Summit, NJ 07901 908-598-7813

www.slcinsure.com

Schultz Forming Products

2796 Loker Ave. W., Ste. 105 Carlsbad, CA 92010 800-822-2875

www.schultzform.com

Siom Marble & Granite Factory

Sector 5, Emirates Industrial City

P.O. Box 22149 Sharjah 22149 United Arab Emirates 97165422240

www.siommarble.com

SolidSurface.com

6641 N. Cibola Ave. Tucson, AZ 85718 520-247-3304

www.solidsurface.com

Stone Cloud

125 Walnut Dr. Tenafly, NJ 07670 201-776-6478

www.stonecloud.us

The Stone Collection

11935 N. Stemmons Fwy. #100 Dallas, TX 75206 972-488-5700

www.thestonecollection.com

Stone Fabricator Elite 211 E. 43rd St., 7th Floor, #270 New York, NY 10017 646-599-5704

www.stonefabricatorelite.com

Stone Services Group 10308 S. Keeler Ave. Oak Lawn, IL 60453 815-210-1006

www.stoneservicesgroup.com

Swan Surfaces

200 Swan Ave. Centralia, IL 62801 800-325-7008

www.swanstone.com

Synchronous Solutions

3405 Rainbow Dr. Waxhaw, NC 28173 704-560-1536

www.synchronoussolutions.com

TotalHousehold Pro

65A Walnut Hill Rd. Bethel, CT 06801 203-733-1276

www.pro.totalhousehold.com

US Silica 24275 Katy Fwy., Ste. 600 Katy, TX 77494 346-334-0745

www.ussilica.com

US Surfaces

4601 Spicewood Springs Rd. Bldg. 1, Ste. 100 Austin, TX 78759

512-454-2229

www.ussurfaces.com

Vendura

1202 Femrite Dr. Madison, WI 53716

262-613-0225

www.vendura.com

Vicostone USA 11620 Goodnight Ln., Ste. 100 Dallas, TX 75229 972-243-2325

www.us.vicostone.com

Water Treatment Solutions 6 Merrill Industrial Dr. Hampton, NH 03842 603-758-1900

www.watertreatmentonline.com

Web-Don 1400 Ameron Dr. Charlotte, NC 28206 800-532-0434

www.web-don.com

Welnest 350 South St. McSherrystown, PA 17344 844-935-6378

www.welnest.net

Willis 1149 Pioneer Rd. Burlington L7M 1K5 Canada 289-775-5814

www.4willis.com

Wilsonart 2501 Wilsonart Dr. P.O. Box 6110 Temple, TX 76503-6110 800-433-3222

www.wilsonart.com

Wood Stock Supply 4705 S. I-90 Service Rd. Rapid City, SD 57703 605-341-6900

www.woodstocksupply.com

ZOLLER

3900 Research Park Dr. Ann Arbor, MI 48108 734-332-4851

www.zoller.info/us/home.html

54 • Vol. 16 / Issue 2 • International Surface Fabricators Association
Companies listed in red are ISFA 2023 Sponsors

Indoor and Outdoor: Caesarstone Porcelain

Featured here is 540 Monumental from Caesarstone’s porcelain range available across the U.S. this spring. This surface has an elephant-gray base with soft off-white markings combined with a stone’s oxidized aspects, rough grain, and dark-gray veining that form the organic textural patterns found in natural stone, in Ultra Rough finish. The new Caesarstone Porcelain range has a fortified frame, high-heat structure and forward design — and the surfaces can be used for both indoor and outdoor countertop applications. For more information visit www.caesarstoneus.com.

Cuarzo Reno by Coverlam

Marble surfaces are all the rage at the moment thanks to their natural elegance and the beauty of the veining. Accordingly, Coverlam Top presents the Cuarzo Reno series, a white marble transformed by rich tints in warm tones. The pieces display a crystallization with a grayish background, enriched by surface veining that evokes the oxidation caused by exposure of the material. The veining adds golden glints that give the pieces a luxurious and exclusive look. For lovers of the marbled look, infinite veining and the properties of technical porcelain, Coverlam Top’s Cuarzo Reno series is the ideal choice, endowing rooms with elegance and personality. Learn more at www.coverlambygrespania.com/en/catalogo/ cuarzo-reno-cov/?product-cata=230.

Proliner by Prodim Systems

GEM Orbital Sander

The GEM Orbital Sander features an 11-inch drive pad which reduces labor by at least 50% over traditional 5- or 6-inch rotary tools. As opposed to high-speed rotary sanders, the 100% orbital action of the GEM sander eliminates the possibility of swirl marks, leaving a totally consistent and uniform finish. There is no need to apply pressure; the weight of the machine does all the work. Simply guide the sander across the surface like polishing a car. The GEM Orbital Sander comes with or without a shroud attachment for dust collection, and is available in 220 volt. Eleven-inch abrasives are available in inventory. This is the ideal tool for sanding large flat solid surface countertops. For more information, visit www.gem-industries.com.

The Proliner established a reputation of being the most accurate, efficient and flexible digital templating device on the market. The Proliner is the core of every Proliner Stone package and perfect for measuring a wide variety of projects, from countertops, with or without backsplashes, to fully tiled bathrooms. With four available versions of the Factory software and increasing levels of functionality, businesses can choose the software that matches their requirements best. The innovative Factory Draw Advanced for instance, provides an easy as-is multiple plane design with insightful 2D/3D views and solid collision alerts. It can easily identify potential problems and it helps in making design decisions. With Factory Full Fabricator you can even build your digital slab library and match all your slabs in your design. For more information and demonstration videos, visit www.prodim-systems.com.

International Surface Fabricators Association • Vol. 16 / Issue 2 • 55
NEWS
PRODUCT

Elevate Dual by Museum Surfaces

DUAL is a collection with a classy air of distinction, inspired by warm-looking marble. With its white background and stylized golden and gray veins, it infuses living spaces with elegance and luminosity. A collection available in a 12 mm thick 150-by-320 cm format for use as countertops in a polished or shaped finish, Dual also features a book match version in the same format and finish as a decorative solution. It is also available in the formats: 100 by 260 cm, 100 by 180 cm, 100 by 100 cm, 75.5 by 151 cm, 60 by 120 cm and a 33.3 by 100 cm sinuous-looking relief tile made with cutting-edge DEEP TECH technology. Learn more at www.museumsurfaces.com.

Covelani by Vicostone

Vicostone is a pioneer in manufacturing durable and low maintenance quartz surfaces featuring stylish colors and patterns preferred by specifiers. Providing high-quality material to fabricators and installers that customers love, the 23 new additions to Vicostone’s collection strengthen its commitment to partners and end-users. Each new color is a unique work of art inspired by nature. For example, Covelani is inspired by the breathtaking views of nature’s coastal cliffs. The quartz color features swaths of shades of white behind distinct gray veins and gold accents. Its color contrast is smooth between layers and characteristic of the depth found in natural quartzite. Covelani is available in jumbo size (130 inches by 65 inches) slabs in 2 cm and 3 cm thicknesses. Find your distributor and order samples at us.vicostone.com.

Levantina’s Marvel Gold

Halfway between classic marbles and mineral veins, Marvel Gold countertops from the Techlam Top series combine the power of porcelain with the beauty of natural stone. The originality of these surfaces derives from the presence of aged gold in the veins, a touch of distinction that raises them above similar ranges. Techlam Top Marvel Gold combines personality and durability and transforms the blandest countertops into high-end surfaces on which cooking is a luxury for the senses. Learn more at www.levantina.com.

No Lift Install System: Edge Sliders

No Lift Install System has solved the laminated and mitered edge install problem with the Edge Slider. The Edge Slider allows laminated and mitered edge counters to be installed with the No Lift cart. The double axle provides stability while the roller bearing on top allows the counter to roll smoothly in any direction. Each set comes with eight Edge Sliders that can be placed anywhere on the No Lift deck. The Edge Slider moves with the counter across the deck of the No Lift until the majority on the piece is over the cabinets. The cart is then lowered, rolled to the side, and the counter is installed as it would be normally. No matter what shape the laminated countertop is, the Edge Slider allows for the full benefits of the No Lift Install System. Learn more and watch videos of the Edge Slider in action at www.noliftsystem.com.

56 • Vol. 16 / Issue 2 • International Surface Fabricators Association
PRODUCT NEWS

HanStone Quartz by Hyundai L&C: Earth Art Collection

Sales Training with Rep Methods

Hyundai L&C is committed to consistently challenging the status quo in the quartz countertop industry with the launch of its new Earth Art collection, which consist of the Opimo, Bianco Marquina, and Calacatta color palettes. Made from one of the hardest minerals in nature, HanStone Quartz is as beautiful as it is durable. HanStone Quartz contains raw materials harvested from the earth, formed into slabs and polished to perfection. Each HanStone surface is uniquely brilliant. The Bianco Marquina collection is a perfect blend of something new and something contemporary. Inspired by the morning sunrise, Aurelia perfectly represents warmth and elegance. Its white base and gold veining are sure to be a beautiful addition to any home. Odina, which is inspired by the grandness of the mountain range, portrays a combination of dynamic and natural beauty. This bold design can add a touch of confidence to any space. For more information, visit www.hyundailncusa.com/hanstone-quartz-featured-colors.

Rep Methods is changing sales training offerings in our world of surfaces. Train new hires or develop employee skills from within. Rep Methods offers courses online, live webinars, in-person seminars and sales team boot camps. With over 20 years in sales and marketing, the consultant will come to you. Rep Methods guarantees an increase in business development and increases in sales and productivity.

Whether your surface business caters to homeowners, builders, developers, commercial projects, luxury residential or kitchen and bath, Rep Methods has programs that are easily accessible, and no membership is required. To learn more, visit www.repmethods.com.

New from Durasein: Leaden and Ever After

As jewellike as a one-of-akind piece of sea glass, Leaden’s washed-and-wave-swept surface looks like a treasure only years of tumbling in the sea could create. But it’s actually just another gorgeous Durasein solid surface — meaning you can get your hands on as much of it as you like. Ever After solid surfacing is a crisp, clean and modern interpretation of classic veining patterns and features a soft, swirling design. This durable, easy-to-work material is easy to coax into all kinds of seamless shapes and structures, from massive walls to countertops, wavy surfaces, ceilings and 3D structures.

Durasein produces a premium, 100% acrylic solid surface material that’s made up of two-thirds alumina trihydrate (derived from bauxite, a natural ore) and one-third high performance 100% acrylic resin and pigments. Due to this high mineral content, the material is incredibly dense and “stonelike,” yet able to be fabricated with standard woodworking tools, plus it is completely thermoformable. For more information, visit www.durasein.com.

International Surface Fabricators Association • Vol. 16 / Issue 2 • 57 PRODUCT NEWS

New from Laminam

Laminam’s five new Italian nature-inspired surface colors are part of two existing color collections — the IN-SIDE Collection and Fokos Collection. The IN-SIDE Collection is characterized by body and surface continuity. The color is consistent throughout the thickness of the slab to ensure the look is apparent no matter where it is cut or planed. The three new additions, part of the Le Terre Series, feature a gradient of soft, muted colors that are deeply rooted in the Italian way of life. They are available in two finishes: Naturale, smooth to the touch, and Fiammato, a flame-patterned process that distinguishes the most prized Italian stones. Grafite and Talco, new to the Fokos Collection, feature velvety-smooth tactile colors inspired by natural elements. Grafite is a deep shade replicating the compact mineral, graphite, while Talco is a lighter shade with cues from primordial natural elements. Laminam is sustainable and extremely durable to meet residential or commercial interior or exterior needs. For more information, visit www.laminam.com.

Lapitec’s 2023 Spring Color Launch

Lapitec is making a worldwide launch of five innovative new aesthetics this spring. Previewed during Design Week in Las Vegas, these five new complex aesthetics further demonstrate the advancement of sintered stone manufacturing and through-body technology all while being silica-free. This new collection delivers on-trend, dramatic veining that emulates the most sought-after natural stone aesthetics. Offering interior and exterior solutions, these new aesthetics are available in three finishes: satin, lux and lithos, offering both designers and homeowners the flexibility for any design application — including indoor and outdoor kitchen countertops and backsplash, bathroom vanities and shower walls, fireplace surrounds, mantles, flooring and wall cladding. Learn more at www.lapitec.com.

Stone Fabricator Elite Opens Its Sales Engine in 90-Day Program This Spring

Join SFE Founder Justin Shaw for a monthly Sales Rep Clinic webinar series with ISFA, which aims to help shops level up their sales rep. Details at ISFAnow.org/webinars.

If you feel like you’re leaving money on the table because of a leaky sales pipeline or lack of a proper CRM and processes — you may be interested to learn more about Stone Fabricator Elite’s unique Sales Engine in the 90-Day program. The program offers a turnkey solution where the SFE team will design, build and install your Sales Engine and onboard your team. The program includes:

• CRM implementation.

• Onboarding your team.

• Installing sales playbooks.

• Auditing your current marketing campaigns.

Stone Fabricator Elite has helped many of the country’s top stone shops to grow their businesses more quickly and easily. To learn more about SFE, visit www.stonefabricatorelite.com.

58 • Vol. 16 / Issue 2 • International Surface Fabricators Association PRODUCT NEWS

Prioritize Safety, Minimize Risk

In the world of countertop fabrication and installation, one primary concern is the presence of respirable crystalline silica (RCS). RCS is a common component in engineered and natural stone, and when inhaled, it can lead to serious health issues such as silicosis, lung cancer and other respiratory diseases. It’s crucial for countertop companies to implement safety measures to reduce RCS exposure in their workplaces.

Here are some ways countertop fabrication and installation companies can reduce RCS exposure and promote a safer workplace.

Use wet cutting methods. One of the best ways to reduce RCS exposure is to use wet cutting methods. Using wet cutting methods, fabricators can significantly reduce the amount of RCS exposure. Keep in mind cutting wet doesn’t necessarily mean your shop will be below the action level from Occupational Safety and Health Administration (OSHA). Wet cutting is just one of the tools in the toolbox for reducing RCS levels in your shop.

Implement proper ventilation. Another strategy for reducing RCS exposure is to implement adequate ventilation in the workplace. This can be achieved using dust collectors and air filtration systems, which capture and remove airborne particles. Implement regular cleaning procedures. Regardless of your shop setup, keeping up with your housekeeping duties is imperative. Make sure the floors are constantly wet to ensure the slurry doesn’t dry and turn into dust that will become respirable. Use a floor scrubber with a vacuum to keep your floors clean. Regularly wipe down everything in your shop that accumulates silica dust. If you recycle your water, don’t use gray water to spray down the floors each day.

Use personal protective equipment (PPE). PPE is another essential tool for reducing RCS exposure if you can’t use wet cutting methods or aren’t able to get air quality levels in your shop below the OSHA thresholds. Properly fitting respirators can effectively reduce RCS exposure during cutting and grinding.

Use new machinery and tools. Advances in machinery and

tools have made it easier than ever to measure and reduce RCS exposure. Most manufacturers now offer source capture cutting solutions that contain dust before it becomes airborne. For example, Trolex created the Air XS real time silica dust monitoring system that makes it easier than ever to measure, in real time, the RCS level in your shop.

Promote materials with less silica content. There are so many advances happening in surfaces today that give fabricators and their customers a lot of choices when it comes to materials. Cosentino’s Silestone line has been reinvented with HybriQ Technology, drastically reducing the amount of crystalline silica in its composition. Consider using alternative materials such as porcelain, sintered stone or solid surface.

Train workers on safety best practices. Making safety a priority in your shop is a must, and your safety program must include RCS mitigation practices. Include information on the proper use of equipment and tools and the safe handling and disposal of materials. Training should be ongoing and repeated frequently to keep it top of mind, and it should be updated regularly as new equipment, tools and improved fabrication techniques are developed. Be thinking about ways to reduce the amount of slurry created, such as using a sawjet to perform sink cutouts rather than a CNC router with a finger bit. A finger bit on a router removes more material than a blade or jet on a sawjet and, therefore, can increase the amount of RCS in your shop. Make safety documentation and resources readily available to everyone in your shop. Take advantage of Caesarstone’s Master of Stone online program to learn more about silica safety measures.

Test your air quality. Ensure the air quality in your shop is safe for your employees by testing at least annually. If you implement new machinery or change fabrication techniques, be sure to test after you’re up and running to verify your air quality levels are not negatively impacted by the change.

While machinery and material manufacturers continue to develop products and processes that minimize silica risk, it’s imperative that you take all the necessary actions to provide a safe and healthy work environment for your employees.

International Surface Fabricators Association • Vol. 16 / Issue 2 • 59
PERSPECTIVES

Turn static files into dynamic content formats.

Create a flipbook
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.