BRAND-NEW
PPH707 EXTi Electrostatic Sprayer: Premium Finish at Optimised Costs The SAMES KREMLIN PPH 707 EXTi optimises installation costs, generates high productivity, and delivers a premium finish. It features fingerless external charging while reaching the most difficult parts in car finishing.
S
AMES KREMLIN has waited until 2022 to enrich its 7 range with
combined with an exclusive air flow device around the electrodes
an electrostatic sprayer with external charge without fingers.
protecting them from the return of paint droplets.
However, the wait and results were well worth it. The PPH 707
Tests in the laboratory and on industrial sites have been performed.
EXTi, intended for waterborne paints, does not only claim the low
It is possible to work up to 8 hours without stopping to clean the
investment costs specific to this technology, it is a qualitative piece of
applicator.
equipment designed to work for hours without stopping to clean it,
The PPH 707 EXTi saves paint: its transfer rate is 8 to 12 points higher
and it contributes also to achieving premium finishes.
than that of non-electrostatic sprayers.
Finishes: SAMES KREMLIN Automotive quality SAMES KREMLIN uses patented devices which have made its reputation in the automobile industry: high-speed magnetic bell cup
It is compatible with SAMES KREMLIN’s patented PaintSave system. The result is paint losses are reduced by 50% during colour changes and hundreds of litres of material are saved each year.
(up to 70,000 rpm), dual-flow air shrouds to control and direct the
For vehicle interiors cut-ins and bumpers
micro-droplets of the paint jet. The PPH 707 EXTi offers a complete
The quality of finish and the compact feature of the new sprayer makes
range of rotating bell cup to adapt perfectly to vehicle interiors cut-ins
it suitable for vehicle interiors cut-ins where it will easily reach hard-to-
and exteriors as well as, bumpers.
reach parts like windshield aprons, hinges, etc. It is also of interest to
Up to 8 hours of non-stop operation without stopping for cleaning
plastics manufacturers for the continuous application of waterborne paints on bumpers with the most complex shapes.
Contamination is significantly reduced thanks to the judicious choice of non-conductive materials, particularly for the crown of electrodes,
© SAMES KREMLIN
162
N. 74 - MARCH/APRIL 2022 - international PAINT&COATING magazine
For further information: www.sames-kremlin.com
© SAMES KREMLIN