ICT - INDUSTRY NEWS
F
1 Figure 1: The separated drying zone of the Pero T50 prevents carryover of media after the rinsing zone. © Pero AG
© Pero AG
or the first time Pero AG showed at the parts2clean 2017 trade fair the new plant Pero T50 for parts cleaning using a tunnel process (Fig. 1). Thanks to spraying water based media a large throughput is reached. The construction supports reliable drying results and offers operators advantages in handling. For the automation of the workpiece feeding and the logistical integration of solvent plants into a manufacturing environment Pero presented a newly developed charging unit. It is designed for common workpiece carriers similar to size 530 x 320 x 200 mm and is built particularly compact (Fig. 2). A real eyecatcher at the trade fair stand was an additively manufactured 3D model of the Pero Competence Centre (Fig. 3). The exhibit often initiated a discussion about the methods of cleaning projects. It crystallized that an optimally tested cleaning process secures procurement decisions. In the real Pero Competence Centre in Königsbrunn near Augsburg Operator Days for parts cleaning will be held on 18th and 19th April 2018. For further information: www.pero.ag
© Pero AG
Pero AG: Presentation of New Tunnel Plant
3
2 Figure 2: The new compact automatic charging unit for the Pero R1 goes along with a conclusive safety concept.
120
N. 48 - NOVEMBER/DECEMBER 2017 - international PAINT&COATING magazine
Figure 3: The possibilities of process technology in the Pero Competence Centre were conveyed by an additively manufactured 3D model.