ICT | Parts2Clean Product Showcase
acp systems AG Effective, reliable and efficient pre-treatment of joining areas Lighter and more energyefficient vehicles which are manufactured more efficiently and resource-saving – as a consequence of these requirements more and more automotive components are joint by gluing processes. Therefore, the joining areas have to be reliably pre-treated, especially when it comes to structural components such as
car body parts. Compared to other cleaning procedures like atmospheric plasma and laser cleaning, the quattroClean technology from acp offers several advantages. This CO2 snow jet cleaning procedure reliably removes separating agents from the surfaces of crash-relevant components made from fiber composite as well as from parts made of
polyamide which are bonded together. The achieved degree of cleanliness enables the subsequent surface activation by flame treatment without any risk of over-activation. The quattroClean process has also proven for the targeted removal of drawing oil from bonding areas of car body parts made of aluminium. In this application the cold and dry process replaces a laser cleaning procedure. Due to the heat input during the laser cleaning drawing oil from surrounding areas has re-contaminated the bonding regions. ‹
acp systems AG 71254 Ditzingen, Germany Phone +49 7156 480140 www.acp-systems.com Hall 9, Stand D06
ATL Anlagentechnik Luhden GmbH Thermal deburring is catching up with the industry After production, components have burrs that are often located in inaccessible places. They usually have to be removed before further processing. In the TEM process (thermal deburring), the material to be removed is burned, as a chemical reaction takes place between the material and the gas mixture. For this purpose, the workpieces are placed in
a deburring chamber, which is hydraulically closed by means of a closure. Via a gas metering system, a precisely defined mixture of fuel gas and oxygen is conducted into the deburring chamber and ignited. During the subsequent combustion, temperatures of 2,500-3,300° C. The burr to be removed reaches its ignition temperature and reacts with the excess oxygen in the deburring chamber. ‹
ATL Anlagentechnik Luhden GmbH 31711 Luhden, Germany Phone +49 5722 992190 www.atl-luhden.de Hall 7, Stand B61
Baldwin Technology Company Inc. Sustainable High Quality, Pure-Filtration System for Clean Water in Precision Parts Cleaning Process Baldwin Technology Company Inc. is pleased to announce the exhibit of Pure-Filtration CW at parts2clean. It is the new exceptional highquality filtration system developed for parts washing machines in the metal and glass industries among other industries. The system enables continuous perfect clean wash water. The self-cleaning filters
76
increases significantly the lifecycle of the wash water leading to nearly zero chemistry waste and drastically reduced water and energy consumption. The filtration system was developed for parts washing machines which require a very clean wash water (< 1 micron) for high precision parts washing process, which with traditional filtration
N. 16 - 2019 OCTOBER - ipcm® Industrial Cleaning Technologies
methods (filter socks, centrifuge, cartridges) and the higher requirements for the surface cleanliness and environmental aspects was until today not satisfactory. This system’s concept is based on cross-flow technology, creating a highly effective filtration performance (< 1 microns). ‹
Baldwin Technology Company Inc. St. Louis, MO 63105, USA Phone +1 314 8636640 www.baldwintech.com Hall 9, Stand A11