Roberto Baldocchi, Secretary of the IspAC Group, Bergamo, Italy
PROTECTIVE COATING | ZOOM ON EVENTS
T h e c e r t i f i cat i o n o f t h e F r o s i o I n s p e c t o r s i n I ta ly La certificazione degli ispettori Frosio in Italia
T
he IspAC (Ispettori Anti Corrosione, i.e. anti-corrosion inspectors) Group, a non commercial and non-profit making body dealing with inspections and organising training courses at different levels, has been appointed by the Norwegian Frosio as the Frosio Italian inspection body, in compliance with the Norsok regulation NS 476-2004. According to this regulation, the inspectors certifying authority and the body in charge of training them must be clearly distinct, in order to avoid overlaps and interferences between the role of the teacher and that of the examiner. So as to meet this requirement, the IspAC Group was delegated by Frosio to institute an Italian training school, qualified for these purposes and suitably selected, thanks also to a series of audits aimed at examining the teaching staff and the personnel organising the course. This school has been recognised in the Chemical and Process Engineering Department “G.B. Bonino” (DIChep) of the University of Genoa, on the basis of its qualifications and experiences accrued in the years and considered by the IspAC Group suitable for guaranteeing a satisfactory quality level. The acknowledgement on the part of the IspAC Group was then accepted and confirmed by Frosio itself, allowing DIChep to work as a training body, coaching the “Surface Treatment Inspectors” through courses held in Italian. The IspAC Group, on the other side, is the body delegated by Frosio to examine/certify the corrosion inspectors in Italy. The course is annual; the training, on the basis of the guidelines provided for by the regulation NS 476, consists in a series of lessons with a duration of at least 72 hours. The theoretical and practical topics discussed and examined by the teachers are: • Materials used in the design • Corrosion elements • Types of surfaces to be painted and their pre-treatment • Environments classification and corrosivity classification • Paints and painting cycles • Standards and regulations in force for the tests • Inspection methods •Health and safety at work. At the end of each course, the candidates (not more than 20 per course) must take a written exam on different topics and a practical test with the tools and the equipment normally used for the inspections. Those who pass these exams acquire the title of Frosio Inspector Level I, II or III. The levels are assigned on the basis of the actual experience gained by the candidate, as related in detail in their Curriculum Vitae and verified by the IspAC Group. The Frosio certification program, which in 20 years of activity has qualified as much as 6.000 inspectors in the world, is internationally recognised by the most important equipment manufacturers in the field of anti-corrosion, from the engineering and off-shore companies to the chemical, petrochemical and energy ones.
I
l Gruppo IspAC Ispettori Anti Corrosione, ente non commerciale e senza fini di lucro che si occupa di ispezioni ed organizzazione di corsi di formazione a vari livelli, è stato delegato dal Frosio Norvegese alla qualifica degli ispettori Frosio per l’Italia, in accordo alla Norma Norsok NS 476-2004. In termini di regolamento, tale norma prevede che l’ente certificatore degli ispettori e quello preposto alla formazione dei medesimi, siano differenti e ben distinti tra loro; ciò allo scopo di evitare sovrapposizioni ed interferenze tra il ruolo del docente e quello dell’esaminatore. Per soddisfare tale requisito, il Gruppo IspAC è stato delegato a suo tempo dal Frosio ad identificare in Italia una scuola di formazione idonea a tale scopo, opportunamente selezionata anche attraverso una serie di audit di verifica del corpo docente e del personale addetto all’organizzazione del corso. La scuola è stata identificata nel Dipartimento di Ingegneria Chimica e di Processo “G.B. Bonino” (DIChep) dell’Università di Genova, sulla base dei requisiti di cui dispone e delle esperienze maturate a livello didattico nel corso degli anni,e ritenute dal Gruppo IspAC idonee a garantire uno standard qualitativo adeguato. La pre-qualifica svolta dal Gruppo IspAC è stato successivamente accettata e convalidata dal Frosio stesso, che ha accreditato il DIChep ad esercitare il ruolo di training body, accreditata alla preparazione degli “Ispettori per il trattamento superficiale”, mediante corsi di formazione in lingua italiana. Il Gruppo IspAC invece, è l’ente delegato dal Frosio ad esaminare/certificare gli ispettori di corrosione nel nostro Paese. Il corso ha una cadenza annuale. Il programma di formazione in base alle linee guida dettate dalla Norma NS 476, prevede una serie di lezioni con una durata non inferiore alle 72 ore. Gli argomenti trattati dai docenti a livello teorico e pratico, prevedono approfondimenti sui seguenti argomenti: • Materiali impiegati nella progettazione delle opere • Elementi di Corrosione • Tipologia delle Superfici da verniciare e loro pretrattamenti • Classificazione degli ambienti e delle classi di corrosività • Pitture e cicli di pitturazione • Standard e normativa vigente degli standard di prova • Metodiche di ispezione • Igiene e sicurezza del lavoro. Alla fine di ciascun corso, i candidati, al massimo 20 per corso, devono sostenere un esame scritto su argomenti di vario tipo ed una prova pratica con gli strumenti e le apparecchiature solitamente adottate per le ispezioni. Con il superamento dell’esame i candidati acquisiscono la qualifica di ispettore Frosio di Livello I o II o III. I livelli vengono assegnati in funzione della reale ed effettive esperienza maturata dal candidato, secondo quanto documentato in dettaglio nel Curriculum Vitae e soggette a verifica dal Gruppo IspAC. La certificazione Frosio, che in 20 anni di attività vanta ben 6.000 ispettori qualificati nel mondo, è riconosciuta a livello internazionale dalle più importanti società di impiantistica che operano nei vari settori dell’anticorrosione quali: società di engineering, off-shore, chimico-petrolchimico, energetico ecc..
12 November 2010