IPCM
PAINT EXPO SHOWCASE
FILTRATION
Wiltec B.V.
Faster Replacement of Filters with Columbus Wireframe Columbus wireframe helps to reduce the filter- and operating costs. The filter has a two to four times longer service life for the same filter surface, compared with matchable products. This applies less waste and reduces operating costs. The
filter efficiency is 96% till 99%, which means higher efficiency, improved filtering of overspray, and lower resistance to air flow. Because the filter is designed with wireframe it is easy to change. The size can be adapted to the respective filter wall.
JOB SHOP COATING
QNC Andrzej Stasz
Innovative Coating of Small Metal Parts by Means of Electromagnetic Induction QNC is one of the cooperating entities within the Flying Fish Group. The company offers an innovative method of coating metal parts which makes use of electromagnetic induction for soaking the paint charge (so-called metal-wear).
It is soaked with the inductor causing eddy currents that raise its temperature. Batch annealing process is regulated by a PID controller integrated into a feedback loop with temperature sensor. When paint reaches the desired temperature the
JOB SHOP COATING
ROTOVER Lackiertechnik GmbH
Decorative and Functional Coating of Small Mass-produced Parts Rotover specialises in the coating of small massproduced parts. A wide range of parts made from metal, plastic, wood or glass are coated as bulk material in special drum coating processes. International customers from the textile,
shoe and leather industries as well as the electronics, automobile, furniture and construction industries appreciate the company’s experience and flexibility. Rotover also swiftly supplies customers with small test batches for new products.
Wiltec B.V., Energielaan 3, 5405 AD Uden, Niederlande, Telefon +31 413 244444, sales@wiltec.nl, www.wiltec.nl Halle 1, Stand 1633
process of applying paint automatically begins. It is performed with a spray gun. The whole process is fully automated and can be controlled with the control panel. It is the process of annealing the batch that makes the technology of coating the metal parts innovative in comparison to the traditional one. It enables significant energy savings thereby reducing the cost of the whole process of painting.
The drum coating process is generally implemented with decorative coatings, but functional systems such as special anti-friction coating systems are also used. Metallic effect paints – which replace electroplate finishing – and water-based paints which meet the demand for environmentally friendly raw materials are also becoming more and more popular.
92 N. 14 - 2012 MARCH/marzo - international PAINT&COATING magazine
QNC Andrzej Stasz, ul. Lublańska 11A/6, 31-410 Kraków, Poland, Phone +48 12 500059564, biuro@qnc.pl, www.qnc.pl Hall 2, Stand 2553
ROTOVER Lackiertechnik GmbH, Duesseldorfer Strasse 59, 42115 Wuppertal, Germany; Phone +49 202 271640, info@rotover.de, www.rotover.de Hall 1, Stand 1413