PaintExpo Expo PRE-TREATMENT
commission of the systems will be done by highly qualified employees.
ASIS GmbH
Increasing the Surface Energy of Plastic Parts To reach an optimal adhesion of paint on polymer plastics, a high surface energy is necessary. This can be reached with the “ASIS Rob Flame” flaming equipment. The accurate regulation of the Gas- and Air mixture is controlled and
regulated by a state of the art PLC system and can be integrated in a supervision process control system. Special burner geometries can be constructed and manufactured for the different customer demands. The installation and
PRE-TREATMENT
CHEMTEC s.r.l.
Cleaning, Degreasing and Organic Phosphating of Metals in One Step CHEMTEC SRL will present the ECOPHOR® system, equivalent of an iron phosphate process and TORAN 3® system for superior corrosion and increased adhesion on non-ferrous metals. The process works in a single step and at room
temperature, creates no liquid or solid wastes, requires only very low energy and no water, and emits extremely low amounts of CO2. The technology is based on a set of particular organic high boiling fluids, a specific blend of polymer modified with
ASIS GmbH, Kiem-Pauli-Strasse 3, 84036 Landshut, Germany, Phone +49 871 27676-0, mail@asis-gmbh.de, www.asis-gmbh.de Hall 1, Stand 1501
phosphate groups (organic polyphosphate). Process time is about: treatment 60 – 120 seconds, dripping off 5 minutes, drying off 8 – 10 minutes at 130 – 150°C. As soon as the parts treated are dried off, they are ready to be painted by either powder coating or wet paint.
CHEMTEC s.r.l., Via G. Puccini 7, 20010 Ossona (MI), Italy, Phone +39 02 92867461, info@chemtec.it, www.chemtec.it Hall 1, Stand 1137
PRE-TREATMENT
DFBLAST Co., Ltd.
Sandblasting and More As a leading manufacturer in surface treatment and finishing industry, DFBLAST Co., Ltd. offers a wide range of products used in the field of sandblasting, safety and industrial connecting, such as sandblast machines (CE certificated) and related
accessories like helmets, hoses, nozzles, couplings, etc. All products are made according to international standards. They are available in different sizes and types as well as adapted to customer’s special requirements.
DFBLAST Co., Ltd, 1st Floor, No. C Building No. 161 Zhenye Road, 201619 Shanghai, China, Phone +86 21 6767159411, sales@dfblast.com, www.dfblast.com Hall 1, Stand 1554
international PAINT&COATING magazine - MARCH/marzo 2012 - N. 14
103