© Axalta Coating Systems
AXALTA COATING SYSTEMS PROVIDES ACE MANUFACTURES WITH THE RIGHT COATING FOR THE RIGHT JOB Axalta Coating Systems offre ai produttori del segmento ACE vernici adatte a tutte le loro richieste Carlos Rodriguez Santamarta Axalta’s Industrial Coatings division in Europe, Middle East and Africa
Michael K. Bollan Axalta’s Industrial Coatings division
Opening Photo: The ZA-TS fertilizer spreader manufactured by Amazonen-Werke. Foto d’apertura: La concimatrice ZA-TS prodotta da AmazonenWerke.
116
he global agricultural, construction and earthmoving equipment (ACE) market uses an estimated US$1.5 billion worth of coatings every year1 and ACE manufacturers place demands on suppliers to provide both increased performance of the coating as well as a strong aesthetic appearance. Changing climate conditions mean that ACE equipment is often exposed to a wide range of temperature and humidity and varying degrees or sunlight. With such harsh environment to consider, many ACE manufacturers have created their own detailed performance level specifications; high on their list of priorities are excellent colour and gloss retention combined with a high degree of edge protection and corrosion resistance, but they don’t often specify whether they want a one-layer or a two-layer system (Fig. 1). To achieve the standards demanded by many ACE manufacturers, two-layer systems are becoming increasingly popular over one-layer systems. However,
T
i stima che il mercato globale del segmento ACE spenda in vernici circa 1,5 miliardi di dollari l’anno1. I produttori ACE richiedono prodotti sempre più prestazionali e un’estetica migliore, mentre le mutate condizioni climatiche portano i macchinari ACE a essere spesso esposti a un’ampia gamma di temperature e umidità e a vari livelli di luce solare. Con un ambiente così estremo da dover tenere in considerazione, molti produttori ACE hanno formulato delle loro precise specifiche in relazione ai livelli prestazionali. Tra le loro priorità c’è l’eccellente tenuta di colore e brillantezza con un alto grado di protezione dei bordi e di resistenza alla corrosione, ma non sempre specificano se vogliono un sistema monostrato o doppio strato (fig. 1). Per raggiungere gli standard richiesti da molti produttori ACE i sistemi doppio strato stanno guadagnando terreno rispetto ai sistemi monostrato. Siccome però l’aspetto economico impone dei limiti, i costi totali di applicazione devono essere analizzati attentamente e, per un fornitore
1 Data by IRFAB (IRFABTM is a brand of PRA, editor’s note).
1 Dati IRFAB (IRFABTM è un brand di PRA, ndr).
N. 42 - NOVEMBER/DECEMBER 2016 - international PAINT&COATING magazine
S