Staphyloid: a Range of Flexibilising Additives for Powder Coatings of High Quality and Performances, the Answer to Our Future. lower size of the agglomerates which is not obtained by sieving but through a specific procedure in the production process. Instead of a secondary particle size of 25-30 μm for the grade AC-4030, AC-4040 has an average size of the agglomerates of 10-18 μm. In addition to the usual increase of the flexibility and improvement of the impact strength, AC-4040 shows excellent dispersion in the powder coating formulation, with positive influence to the aspect of the coating film, even in thin film applications thanks to a higher affinity of the refraction index. Staphyloid AC-4175, in comparison to the traditional types, shows an increased functionality in the shell layer. It gives excellent results in the Erichsen test, allowing to achieve 5-6 mm without microcracks. Especially interesting for application in all powder coating systems is the type Ganzpearl GBM-55, a butylacrylate methylmethacrylate - butanediol diacrylate copolymer. Like the other grades described above, it is a polymer bead with core/shell structure. The average size of the primary particles is 7-8 μm; the core has Tg = - 40°C, the shell layer has Tg = 110°C. Easily dispersible into the resin, it improves the mechanical properties of the coating, highly increasing the impact strength and the flexibility. It eases the flow of the coating when applied onto the substrate, thus improving the aspect of the film and reducing any possible haze. All the “Staphyloid” e “Ganzpearl” products for powder coatings are distributed and commercialized in Europe and in the Middle East on exclusive basis by Omicron Europa in cooperation with the company Came Srl. Came is based in Italy, Origgio (Varese) and it’s the agent of companies leader in the production of raw materials for the industries of friction, coatings, rubber and adhesives.
56 N. 19 - 2013 JANUARY/FEBRUARY - international PAINT&COATING magazine
feriore dimensione degli agglomerati, che non viene ottenuta per setacciatura ma attraverso uno specifico e mirato intervento nel processo produttivo. Rispetto a una dimensione secondaria delle particelle, pari a 25-30 μm per il tipo AC-4030, AC-4040 ha una dimensione media degli agglomerati di 10-18 μm. Oltre a conferire il consueto aumento della flessibilità e miglioramento della resistenza all’impatto, AC-4040 presenta eccellenti caratteristiche di dispersione nella formulazione della vernice in polvere, con effetto positivo sull’aspetto superficiale del film anche nelle applicazioni a basso spessore, grazie alla maggior affinità dell’indice di rifrazione. Staphyloid AC-4175, rispetto ai tipi tradizionali, presenta un’aumentata funzionalità nello strato esterno. Dà un esito molto buono nella prova d’imbutitura Erichsen, permettendo di arrivare fino a 5-6 mm senza microfratture. Di particolare interesse per applicazione in tutti i sistemi di vernici in polvere è il tipo Ganzpearl GBM-55, un copolimero butilacrilato - metilmetacrilato - butandiol diacrilato. Anch’esso è un polymer bead del tipo core/shell. La dimensione delle particelle primarie è 7-8 μm; il nucleo ha Tg = 40°C, lo strato esterno ha Tg = 110°C. Di facile dispersione nella resina migliora le meccaniche della vernice aumentandone la flessibilità e la resistenza all’impatto. Grazie alla sua capacità di facilitare lo scorrimento del prodotto verniciante quando applicato sul substrato, migliora anche l’aspetto del film superficiale, con riduzione dell’eventuale velatura. Tutti i tipi “Staphyloid” e “Ganzpearl” per vernici in polvere sono distribuiti e commercializzati in via esclusiva in Europa e Medio Oriente dall’Omicron Europa, in collaborazione con la società Came Srl. Came ha sede a Origgio, in provincia di Varese, ed è agente di società leader nella produzione di materie prime per l’industria del friction, vernici, gomma e adesivi.