SPECIAL PaintExpo
BRAND-NEW
The New edrizzi® Type for Paint Shops with Low Initial Pressure edrizzi® developed a special type of edrizzi® dry separator: the edrizzi® combi.
Due to constant development in the edrizzi®
system, which has been built and retrofitted
absorption capacity and therefore long service
technical centre and in close cooperation
in the international surface industry since
life of edrizzi®.
with the industry, a special type of edrizzi
2003. The framework inside the new dry
The degree of separation of the patented,
dry separator evolved. edrizzi® combi was
scrubber is designed to meet the edrizzi®
original edrizzi® paint mist separators is up to
specifically developed for applications where
usual high degree of separation, when used
97%. Their absorption capacity of 100 kg/m²
high air volume hits small separation areas.
in applications with low initial pressure and
and more, depending on the type of surface
The new type consists of a 350 mm deep dry
high air volumes, such as paint shops of the
material used, remains unrivalled in dry
separator with integrated slow-down zone
automotive industry. Alternative cardboard
absorption.
for airflow and a 150 mm deep follow up
scrubbers with conventional filter materials
filtration. With a total depth of 500 mm the
such as paper mesh reach a tolerable degree
For further information:
type fits into the proven edrizzi® modular
of separation, but fail by far to reach the high
www.edrizzi.com
© edrizzi®
© edrizzi®
®
The new type edrizzi® combi with a particularly developed framework.
edrizzi® combi can be used in applications with low initial pressure and high air volumes, such as paint shops of the automotive industry.
ATEX Certified Oven Temperature Profiling System Safety • • • • • •
Certified for ATEX classified Zone 2 use Intrinsically safe Epsilon-x data logger (Group II Cat 3G) Ten points of measurement Thermal Barrier Protection (over 3.5 hours @ 200 °C) Custom designed range of thermocouples Regulatory compliant monitoring
Simplicity
New ation innov y et f a s &
• Easy to interpret PASS/FAIL graphical cure • Paint cure QA reports shared easily and efficiently • Local technical support, service and ISO17025 calibration - quick help if you need it
PhoenixTM GmbH www.phoenixtm.de info@phoenixtm.de +49 5731 30028 0
Karlsruhe 12-15.10.2020