BRAND-NEW EMB: THE NEXT STEP IN SOLVENT FREE COATING EMB: il prossimo passo verso la verniciatura senza solventi
S
ince 2004 EMB-Technology has been working on the development of machines for powder coating on flat substrates by the EMB (Electro-Magnetic Brush) technique. With this technology it is possible to coat flat substrates of almost any material with a well-controlled and uniform powder coating at relatively high speeds. Aluminum, steel, glass, ceramics, wood, paper and all kind of plastics can be powder coated with EMB. The availability of this technology can now open up a wide range of new and innovative possibilities for powder coatings. While with conventional technologies the limited thickness control was always an important constraint for the deposition of powders on flat substrates now, due to the fact that EMB enables a very even and adjustable coating layer (between app. 5-120 micron), this constraint for the use of powder will disappear and powder will find a way to replace more solvent based coating solutions. This will contribute to a leaner, cleaner and greener planet since the need for solvents and the costs to deal with them will decrease. Other characteristics of the technology are very useful for numerous applications too. The coating method is contactless and therefore eliminates any risks for surface defects in the coating. The waste of substrate and powder is virtually none because the start and stop behavior of the process requires only a few centimeters substrate and the process goes without overspray. This makes EMB a very clean process in comparison with conventional (powder) application methods. A job change over to another material, another substrate width and/or another color can be done in minutes which is a big advantage compared to existing coating processes. Next to this the small footprint of an EMB unit is of importance for integration in existing coating lines. The machine can be realized for material widths from 10 to 1650 mm for both flexible and rigid substrates. Over the past seven years, the technology is proven in production environment and further developed. Since February 2011 there
20 N. 9 - 2011 MAY/maggio - international PAINT&COATING magazine
D
al 2004 EMB-Technology lavora sullo sviluppo di macchine per la verniciatura a polveri di superfici piane con la tecnica EMB (spazzola elettro-magnetica). Con questa tecnologia è possibile verniciare substrati piani, praticamente di qualsiasi materiale, con un rivestimento a polveri ben controllato e uniforme a velocità relativamente alte. Alluminio, acciaio, vetro, ceramiche, legno, carta e ogni tipo di materiale plastico possono essere verniciati a polveri con EMB. Attualmente, disporre di questa tecnologia apre numerose opportunità ad applicazioni nuove ed innovative delle vernici in polvere. Mentre con le tecnologie convenzionali il controllo limitato dello spessore ha sempre rappresentato un importante freno alla deposizione di polveri su substrati piani, adesso, grazie alla tecnologia EMB che consente un rivestimento molto uniforme e regolabile (tra 5-120 micron), questo freno all’utilizzo delle vernici in polvere scomparirà e le polveri potranno sostituire le soluzioni a base di solventi. Ciò darà un contributo per un pianeta più verde e più pulito dal momento che diminuirà l’utilizzo di solventi. Altre caratteristiche della tecnologia sono molto utili per numerose applicazioni. Il metodo di rivestimento è senza contatto e quindi elimina qualsiasi rischio di difetti superficiali nella verniciatura. Lo spreco di superficie e di polvere è virtualmente inesistente poiché il funzionamento “start and stop” del processo richiede solo pochi centimetri di substrato ed è privo di overspray. Questo rende EMB un processo molto pulito rispetto ai metodi convenzioni di applicazione polveri. Il passaggio verso un altro materiale, una diversa ampiezza del susbstrato, e/o un altro colore può avvenire in pochi minuti, il che costituisce un grosso vantaggio rispetto ai processi di rivestimento esistenti. Inoltre l’ingombro limitato dell’unità EMB risulta fondamentale per l’integrazione nelle linee esistenti. La macchina può essere realizzata per manufatti dall’ampiezza compresa fra 10 e 1650 mm, sia per substrati flessibili che rigidi. Negli ultimi sette anni, la tecnologia è testata negli ambienti produttivi ed è stata ulteriormente sviluppata. Dal febbraio 2011 una linea di verniciatura a polveri EMB è disponibile presso la sede di EMB-Technology